What do the dates and the times on the data sheet mean?

what does the dates and the times on the data sheet mean?

marcus19541
We definitely want to make sure that your data usage reporting is clear so you can monitor everything clearly! The timestamps that appear when viewing your data usage details on My Verizon may not be the exact time that data was completely used. The corresponding usage and time reflect usage from between the last report and the one you're reviewing.
For example, say there was a report for 312MB at 2AM and the report right before that was for 100MB at 6PM. The 312MB were used between the 6PM report and the 2AM of it's own time stamp.
Please let us know if you have any further questions about your data usage!
RuthW_VZW
Follow us on twitter @VZWSupport

Similar Messages

I entered a new calendar event at I cloud on my laptop. The enent showed up on my I Phone 4S but, the start and finish times on the entry in I cloud was different than the times shown on the I phone calendar. How do I sync the time in my I Phone with

I entered a new calender event using I cloud on my laptop. The enent transfered to my i Phone 5 S but, the start and finish times shown st i cloud on the laptop are different than the times shown on the i phone. How do I sync the times on the i Phone with the times shown on the laptop i cloud calender?

Turn off time zone support on the phone.

Changing date and/or time of photos

I often change the time of individual iPhoto pictures to change their order in the photo Library.
I change the date and or time in the information section. I have iPhoto sort the photos by date.
I just imported about 1200 photos from a DVD and want to change the order of some of them, but when I change the time, the new time stays there, but the photo either does not move or moves to the incorrect place. I have closed and reopened iPhoto and even restarted the computer.
I would appreciate any help or suggestions.
Thanks in advance.

Try using the Photo menu ==> batch change date and time (if the photos either do not have a data and time or they are not in the date time sequence you want or the adjust date and time (if you want to add a constant amount to all photos selected keeping them in the same date/time sequence but with a different date and time - and select the change the original option
LN

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

linda mariefromharper woods wrote:
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
It may be in the process of making room. What version of OSX are you on? (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network; Lion has improved it greatly.)
A clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. That should help you figure out what's going on. If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
If you can, connect via Ethernet; it will be 2-3 times faster.

Whats basic difference between data and types while declearing the itab

whats basic difference between data and types while declearing the internal tables...
DATA : BEGIN OF t_vbap OCCURS 0,
vbeln1 LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
kwmeng LIKE vbap-kwmeng,
netpr LIKE vbap-netpr,
netwr LIKE vbap-netwr,
werks LIKE vbap-werks,
matnr LIKE vbap-matnr,
arktx LIKE vbap-arktx,
   END OF t_vbap.
vs
   TYPES : BEGIN OF t_vbap,
vbeln1 LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
kwmeng LIKE vbap-kwmeng,
netpr LIKE vbap-netpr,
netwr LIKE vbap-netwr,
werks LIKE vbap-werks,
matnr LIKE vbap-matnr,
arktx LIKE vbap-arktx,
   END OF t_vbap.
and vs
TYPES : BEGIN OF t_vbap,
vbeln1 LIKE vbeln,
posnr LIKE posnr,
kwmeng LIKE kwmeng,
netpr LIKE netpr,
netwr LIKE netwr,
werks LIKE werks,
matnr LIKE matnr,
arktx LIKE arktx,
   END OF t_vbap.

hi,
like -> used for refering existing data elements in data dictionary or in sap
type -> used for refering existing data types in sap.
types: used for creating used defined structure of tables which has fields from more tahn one table.
diff b/w types and type in creation of internal tables is that when u create a table with types then u can use same for work area creation also.
ex:
TYPES : BEGIN OF t_vbap,
vbeln1 LIKE vbeln,
posnr LIKE posnr,
kwmeng LIKE kwmeng,
netpr LIKE netpr,
netwr LIKE netwr,
werks LIKE werks,
matnr LIKE matnr,
arktx LIKE arktx,
END OF t_vbap.
data: itab1 type t_vbap
        wa_itab1 type t_vbap.
when type is used then u have to create a defintion of work area for another time when internal table doesnt have headr line as
ex:
DATA : BEGIN OF t_vbap OCCURS 0,
vbeln1 LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
kwmeng LIKE vbap-kwmeng,
netpr LIKE vbap-netpr,
netwr LIKE vbap-netwr,
werks LIKE vbap-werks,
matnr LIKE vbap-matnr,
arktx LIKE vbap-arktx,
END OF t_vbap.
DATA : BEGIN OF wa_vbap,
vbeln1 LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
kwmeng LIKE vbap-kwmeng,
netpr LIKE vbap-netpr,
netwr LIKE vbap-netwr,
werks LIKE vbap-werks,
matnr LIKE vbap-matnr,
arktx LIKE vbap-arktx,
END OF wa_vbap.
if helpful reward soem points.
with regards,
suresh.

I make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do

i make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do

Those are the instructions for your computer's iTunes (i.e. using the Store menu at the top of your computer's iTunes and selecting 'View My Account' on it). If you are doing it on your iPad then are you following the instructions for iOS devices :
To unhide your purchases
Depending on the content type, open the App Store, iBooks, or iTunes Store on your device.
Scroll to the bottom of the main page.
If you're not already signed in, tap Sign In.
Tap your Apple ID name, then tap View Account.
Scroll down on the Account pane, and tap Hidden Purchases.
Locate the item you would like to unhide then tap the Unhide button.

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I can't print using airprint from my iPhone 4. Everything with the phone and the printer and router are up to date. I can print from my iPad 2 with no problems. What's wrong with the iPhone 4?

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

How do you know what the data usage was for and why? It shows you date and usage but not the reason.

How can you see what data usage was for on the bill? It only shows the date and usage but not the reason for the usage.

You can not see this info on VZW's site. There are apps for smartphones that will break down the info though, but by site or what was downloaded

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

My ipod touch 4 gen is in recovery mode and i dont know how to get out of it,i tried everything like hold the home and top button at the same time. All it did what g to the apple logo and went back to recovery mode any help?

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
kevinpowell1 wrote:
how can i get it out of recovery mode?
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Some users have reported as many as 8 or 9 attempts were necessary before success.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

I've made a photo book, but ordering this iPhoto crashes and I have to reopen the program; done this several times and each time uploading the 3rd page (of 86) it crashes again. My software is up to date (9.2.1), so that is not the problem.

I've made a photo book, but ordering this iPhoto crashes and I have to reopen the program; done this several times and each time uploading the 3rd page (of 86) it crashes again. My software is up to date (9.2.1), so that is not the problem.

Try boot into Safe Mode and try again.

Add Audit Columns to the Dimension and Fact tables (Created & modified date Time)

Hi All,
I am new to SSIS , I have to Add Audit Columns to the Dimension and Fact tables (Created & modified date Time) of the package.
Please let me know the best and easy way through which I can implement the same.
If possible suggest some real time example or link where I can find the same
Regards,
Vipin jha
Thankx & regards, Vipin jha MCP

You can simply use ALTER TABLE ADD.. syntax to add the columns if the tables already exist.
You can generate a single script for all tables using INFORMATION_SCHEMA.TABLES view
You can make then of NOT NULL type and set the default value to GETDATE()
In addition you can also have a Audit Trail trigger for UPDATE to make sure Modified date gets updated correctly on each update if not passed explicitly.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

HT5409 I asked if AVCHD files can be played on Mac and the support site says to simply click on the icon and quick time will play it. A big lie. Just say it won't support the file type and tell us what apps to get.

I asked if AVCHD files can be played on Mac and the support site says to simply click on the icon and quick time will play it. A big lie. Just say it won't support the file type and tell us what apps to get. anybody?

I also had issues opening AVCHD files on case-sensitive filesystems.
You can try these steps to solve the issue:
Right click on the AVCHD file and select 'Show Package Contents'
Right click on the BDMV file and select 'Show Package Contents'
Rename index.bdm to INDEX.BDM (it seems that all files in the BDMV folder should be in UPPERCASE for Quicktime to open the AVCHD file).
Go back twice and try again to double-click on the AVCHD file (Quicktime should open a window showing the multiple clips, as expected).

HT1349 Ive just purchased a new pc and installed and authorized Itunes for the fifth and final time. What do I do if purchase another device and need to authorize Itunes again ?

Ive just purchased a new pc and installed and authorized Itunes for the fifth and final time. What do I do if purchase another device and need to authorize Itunes again ?

You may find these Links informative...
http://support.apple.com/kb/HT4627
About authorization and deauthorization

What can I do if I press the home and sleep botton at the same time and it doesnt take a picture?

What can I do if I press the home and sleep botton at the same time and it doesnt take a picture? I want to take a picture of something in the internet and I cant! I used to be able to do it but now, it doesnt work anymore? What can I do?

Press and hold the home button
Quickly press and release the sleep button
Release the home button
You'll hear a shutter click
The screenshot will be in your camera roll

Last time my lack of an admin password to alter the desktop interfered with the download and now it says the invitation has already been accepted so I can't retry... The team administrator says there's no resend option. What do I do?

Last time my lack of an admin password to alter the desktop interfered with the download and now it says the invitation has already been accepted so I can't retry... The team administrator says there's no resend option. What do I do?

Moving this discussion to the Adobe Creative Cloud forum.

What do the dates and the times on the data sheet mean?

Similar Messages

Maybe you are looking for