What do the easyserve status codes mean?
the status codes read " OS" machine is being repaired and then "CX" Machine has been shipped are those anyhitng worrisome? or just regular depot 'Jargon?'
Solved!
Go to Solution.
OS means "on site", some one is working on the machine. CX means the repair action is complete.
Similar Messages
-
What do the 4 different codes mean?
Many of these IDS warnings in HH2 security logs in the last few days, in specifics does anyone know what the different codes mean : i.e what the { S.A.U.P} {F.R.P} {F.A..} and {S.ARUP} that appear as the only differences in the attempts mean?.
Cheers.
06:11:38 29 Jun
IDS proto parser : tcp null port (1 of 1) : 115.236.59.28 81.xxxxx 0060 TCP 0->0 [S.A.UP] seq 3029953125 ack 0 win 80
04:41:27 29 Jun
IDS proto parser : tcp null port (1 of 1) : 115.236.59.28 81.xxxxxxx 0060 TCP 0->0 [.F.R.P] seq 3029953125 win 80
03:05:55 29 Jun
IDS proto parser : tcp null port (1 of 1) : 115.236.59.28 81.xxxxx 0060 TCP 0->0 [.FA...] seq 3029953125 ack 0 win 80
02:56:43 29 Jun
IDS proto parser : tcp null port (1 of 1) : 115.236.59.28 81.xxxxxx 0060 TCP 0->0 [S.ARUP] seq 3029953125 ack 0 win 80Thanks for the info. That's where I looked but I don't have a Security subheading, though the firewall is active. No problem, just wanted to make sure I hadn't missed something obvious.
You can click the white star next to this message if you think it was helpful. -
Can anyone tell me what the following error code means? 4MOT/2/40000004: BOOSTA-1235
Fans are running permanantly and this is the error I get when running apple hardware test.SNS is a sensor error. The sensors read actual temperatures at several points inside the Mac chassis to decide when things are heating up, and which fan or fans speed up to improve cooling.
Some of those sensrs are just a thermal-sensitive transistor mounted to a surface that conducts heat, and replacement does not run into big money. Disconnected wires are sometimes a possibility, especially if things were changed nearby, e.g., new heatsink. -
Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, KedarHi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar -
What is the wrong in code while creating a container
Hello all,
what is the wrong in code while creating container.
*& Report ZTEST_TREE4
REPORT ztest_tree4.
* CLASS lcl_application DEFINITION
CLASS lcl_application DEFINITION CREATE PRIVATE.
PUBLIC SECTION.
CLASS-METHODS: run_application.
METHODS constructor.
PRIVATE SECTION.
CLASS-DATA: s_container TYPE REF TO cl_gui_simple_container.
DATA: container TYPE REF TO cl_gui_simple_container.
ENDCLASS. "lcl_application DEFINITION
* CLASS lcl_implementation DEFINITION
CLASS lcl_application IMPLEMENTATION.
METHOD run_application.
IF lcl_application=>s_container IS INITIAL.
CREATE OBJECT lcl_application=>s_container.
ENDIF.
ENDMETHOD. "run_application
METHOD constructor.
CREATE OBJECT container.
ENDMETHOD. "constructor
ENDCLASS. "lcl_implementation DEFINITION
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
CALL METHOD lcl_application=>run_application.
SET PF-STATUS 'CO_100'.
SET TITLEBAR 'CO_100'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module exit INPUT
* text
MODULE exit INPUT.
LEAVE PROGRAM.
ENDMODULE. " exit INPUT
START-OF-SELECTION.
CALL SCREEN 100.
regards,
Lisa.
Edited by: Lisa Roy on Mar 6, 2008 10:15 AM
Edited by: Lisa Roy on Mar 6, 2008 10:29 AMHi Lisa,
a container must be placed in a respective screen area. Also the module calls must be implemented in your screen input and output sections. Finally you have to place something (a GUI control) in your container.
I do not see anything like this in your program. So I don't know what you are asking about. Do you get any error message?
Regards,
Clemens -
What are the main transaction codes in XI?
What are the main transaction codes in XI?
SAP XI TRANSACTION CODES
ALRTCATDEF- Alerts Configuration.
ALRTDISP - Display of Alerts Created
SXMB_IFR -> Start Integration Builder
SXMB_MONI -> Integration Engine - Monitoring
SXI_MONITOR -> XI: Message Monitoring
SXI_CACHE -> To Access IS runtime cache
SXI_SUPPORT -> Test all the Repository and Directory Objects
SXI_CACHE -> XI data directory cacheidx1 -> idoc adapter
IDX2 -> idoc metadata
IDX5 -> monitor idoc adapter
SM21 -> log di sistema
ST22 -> dump abap (analisi di eccezioni)
SMQ1 -> messages inbound e outbound queue
SMQ2 -> messages inbound e outbound queue
SMICM -> J2EE administration
ST06 -> stato della macchina cpu memory filesystem machine status - cpu, memory and file system.
ST03 -> workload.
SCC4 -> visualizza mandanti del sistema
WE20 -> partner profiles
sale - ale settings
RZ10 - edit system profile
SM59 ->mantain rfc destinations
BD64 -> mantain distribution model (trasformazioni)
SU01 -> users
AL08 -> list all logged users(user login logon)
SE10 -> Change Request
SE09 -> Change Request
WE05 -> All idocs
WE19 -> IDoc Test Tool
WE21 -> port definition
SE11 -> Data dictionary
SM21 -> log sistema xi
se37 -> mantain funcion modules
SICF -> http server configuration
SMGW -> trace, alzare livello di trace.
BD13 ->
BD64 -> modelli di distribuzione
PFCG -> Roles
tabella TSTC -> sap transactions codes
tabella TSTCT -> transaction descriptions
STMS -> transports management
SPAM -> apply ABAP support packages
SPAU -> manage objects after apply support packages
SE01 -> manage change requests
SLDCHECK -> Test SLD Connection
SLDAPICUST-> SLD API Customizing
SXMB_ADM -> Integration Engine - Administration
SXMB_MONI_BPE -> Process Engine - Monitoring
SE38 -> ABAP Editor
SE11 -> ABAP Dictionary
ST22 -> ABAP dump analysis
SPROXY-> ABAP Proxy Generation
SE80 -> Object Navigator
ABAPDOCU -> ABAP Documentation and Examples
SE24-> Class Builder
SM21-> Online System Log Analysis
SMQ1-> qRFC Monitor (Outbound Queue)
SMQ2-> qRFC Monitor (Inbound Queue)
RZ70-> SLD Administration
SM58-> Asynchronous RFC Error Log
SM59-> RFC Destinations (Display/Maintain)
SMICM-> ICM Monitor
WE60-> Documentation for IDoc types
BD87-> Status Monitor for ALE Messages
IDX1-> Port Maintenance in IDoc Adapter
IDX2-> Meta Data Overview in IDoc Adapter
WE05-> IDoc Lists
WE02-> Display IDoc
WE19-> Test tool
WE09-> Search for IDocs by Content
WE20-> Partner Profiles
WE21-> Port definition in XI
SE16-> Data Browser
SE93-> Maintain Transaction Codes
SM30-> Call View Maintenance
SU01-> User Maintenance
SM02-> System Messages
BD54 -Logical System Creation.
SWXF_PBUILDER -> for Detail BPM Process
SMQS - > to register the destination in QOUT scheduler
WEOUTQUEUE - > to start the queue processing
SMQR - > to register the queue
IDXPW - > to activate the IDOC message package
IDXP - > to monitor the message packages.
SWF_XI_CUSTOMIZING -> transaction to check prerequisites for integration processes.
http://www.erpgenie.com/abaptips/content/view/452/62/ -
What are the importent transaction codes in edi
what are the importent transaction codes in edi
hi,
=>sale - ALE Customizing
=>bale - Distribution Administration (ALE)
=>wedi - IDOC Type and EDI Basis
=>shdb - BDC (Transaction Recorder)
=>lsmw - LSMW
=>bapi - BAPI
=>spau - Display Modified DE Objects
=>spdd - Display Modified DDIC Objects
=>sara - central idoc archiving
=>stms - Transport Management System
=>wedi - IDOC Type and EDI Basis (IDOC Configuration)
=>bd21 - Analyze change pointers - create IDOC from change pointer
=>bd10 - Send Material Master
=>bd12 - Send Customer Master
=>bd14 - Send Vendor Master
=>bd50 - Activate Change Pointer for Message Type
=>bd55 - Conversion rule user exit (Link conversion rule user exit to the different system \ partner combinations)
=>bd54 - Maintain Logical Systems
=>bd71 - Distribute Customer Model
=>bd87 - Process Inbound IDOCs
=>bd88 - Process Outbound IDOCs
=>bdm2 - Cross-system IDOC Reporting
=>bdm7 - ALE Audit - statistical analyses
=>bdm8 - ALE Audit - sending confirmations
=>bd61 - Activate Change Pointer generally
=>bmv0 - Direct Input Data Transfer Administration
=>rz04 - Operation Mode
=>rz12 - RFC Server Group Maintenance
=>sar3 - Archiving object customizing
=>s001 - SAPoffice Inbox
=>s010 - Standards Texts (SAP Script)
=>se01 - Transport Organizer (Extended View - Performing and managing the transport of development object across different systems)
=>se09 - Transport (Workbench) Organizer (Controlling and keeping track of Development work and Development Objects)
=>se78 - Administration of Form Graphics (Import Graphics into SAP System)
=>se84 - ABAP Repository Information (search for SAP objects)
=>su01 - User Maintenance (Security)
=>su02 - Maintain Authorization Profiles
=>su03 - Maintain Authorizations
=>sm36 - Background Job Scheduling
=>sm37 - Background Job Monitoring (display batch jobs)
=>sm31 - Table Maintenance
=>sm30 - Calling View Maintenance
=>sm35 - Batch Input Monitoring (Error Logs)
=>sm50 - Process Overview
=>sm58 - Transactional RFC Monitoring
=>sm59 - Maintain RFC Destinations (Define RFC Configuration)
=>snro - Number Range Objects (for IDOCs)
=>we02 - Display IDOC
=>we05 - IDOC lists
=>we07 - IDOC statistics
=>we12 - Inbound processing of outbound file - convert outbound to inbound file
=>we14 - Process (dispatch) IDOCs through Port - RSEOUT00
=>we15 - Outbound IDOC from NAST - message control
=>we16 - Inbound File
=>we18 - Generate status file
=>we19 - Test tool
=>we20 - Add new Message Type to Partner Profile
=>we21 - Maintain Port Definition
=>we30 - IDOC Type development
=>we31 - IDOC Segment development
=>we41 - Process Code Outbound
=>we42 - Process Code Inbound
=>we46 - IDoc Administration
=>we47 - Status Code Maintenance
=>we57 - Assign function module to logical message and IDoc type
=>we63 - IDOC Type for Parser Output
=>we82 - Assign IDOC to Message Type
=>we60 - IDOC Documentation - IDOC Types
=>we61 - IDOC Documentation - IDOC Record Types
=>we81 - Create new IDOC Message Types
=>we82 - Assign IDOC to Message Type
=>pa20 - Display HR Master Data
=>pa30 - Maintain HR Master Data
=>bd59 - Create and assign Filter Object Type for Message Type
=>bd64 - Maintenance of ALE or any other Distribution Model
Hope this helps, Do reward. -
What does the flashing yellow light mean on my airport express?
what does the flashing yellow light mean on my airport express?
Open AirPort Utility, the application that you used to configure the AirPort Express and click Manual Setup.
Click directly on the word "Status" (2nd line) and a window will open to tell you why the Express is complaining. What is the message?
It might be a notification that an update is available for your Express. -
What is the network unlock code for my HTC Thunderbolt?
I want to unlock my husband and I's HTC Thunderbolts. Our contract is up and we bought our phones out right before we signed a contract. What is the network unlock code for the HTC Thunderbolt phones?
Thanks. Apparently Verizon isn't really "sorry to see the customer go". I'll simply buy an unlocked phone and be done with Verizon for good. Two years is to long to be treated like this by them. I bought my phone and should be able to use it with whatever carrier I want. It is no longer Verizon's phone. Yes I understand they own some of the stuff they put on my phone but by all means they can remove it. I didn't want their crap on their in the first place. I wish the rest of America would quick kissing their rear. End Rant
>>Edited to remove profanity<<
Message was edited by: Verizon Moderator -
What are the different transaction codes for PGI?
1. What are the different transaction codes for PGI?
2. What transaction code should I use for a Group Delivery?
Regards,
Nazim.Hi
Go to VL02 and you can do the PGI.
Regfarding Group Delivery, you can create a batch job and link the program to the batch job so that the job picks up all the orders and create deliveries.
Creating a Background Job Using the Job Wizard
From the main menu select System>Services>Jobs>Define Job (transaction SM36).
Press the Job Wizard button and step through the screens as follows:
1:Continue
2: Enter a name for your job. Continue.
3: Continue with ABAP Program Step selected
4: Enter the ABAP Program Name and variant name.
Press the Print Parameters button, specify the required printer and set the "Time of Print" to "Send to Print Spooler for now".
Press green tick
Continue
5: If more reports need to be added to the job tick the checkbox, press continue and repeat screens 3 and 4.
6: Select how the job is to scheduled (eg Date and Time)
7: Enter the required scheduling information ( eg Date and Time) and if required tick "Periodic Jobs"
8: If "Periodic Job" was selected select the frequency (eg Monthly)
9: Check the job details and press Complete
Hope the above info helps.
Reward if useful
Regards -
Why do i keep getting the message 'Cannot connect to iTunes Store' when I have done every connection I can find? What does the error message (-1202) mean when I am on the iTunes site on my computer?
Hi Velvalee,
While there may not be specific information about that error, here is an article of steps for troubleshooting connectivity issues with the iTunes store:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
If that article does not help, there is a link near the bottom for an additional article of advanced troubleshooting.
Cheers!
- Ari -
On opening some pdfs in new tab, get a box labeled Adobe Acrobat with a ? in it. Go back to the original link, right click on the link gets the pdf. What does the box and ? mean and why do I get it when trying to open some pdfs? Running W7, FF 10.0.2, Adobe Standard 9. Thanks.
Assuming that you are using IE10 / IE11 on Windows: http://support.microsoft.com/kb/2716529
-
What is the standard transaction code to see price for a material
can anyone tell me what is the stadard t code to display price of a material for different customers the input contains sales organization distribution channel material valid on and end date
Urgent
thanksUse condition maintenance function (VK31) to meet your needs.
Go to VK33 to display pricing reports, choose conditions > by customer, narrow down results by specifying org units, validity periods, customer and material range, condition type etc.
Or at SE43, display area menu cond_av, where you can find out what pricing reports constitute this menu i.e your condition maintenance screen. If it is a routine task, creating an area menu may be needed.
At V/LA, pricing reports can be easily created to suit specific requirements. Then newly created reports can be added to area menu via SE43. -
WHAT DO THE DIFFERENT COLORS CIRCLES MEAN WHEN YOU LOCATE YOUR IPHONE?
I was just wondering what do the different color circles mean when I've located my iphone. So far I've seen a green dot with a green bigger outlined circle around it , a gray circle , a gray circle with a gray bigger outline around it , a real big green circle like the whole circle is dark green. I'm mainly just wondering can you tell if they are texting or using the phone at the time or if its on off or on vibrate is that what those different colors mean?
Thanks alot ,Hi MyStErYbItCh69,
If you are looking for more information on the map indicators in Find My iPhone, you may find the following article helpful:
iCloud: Locate your device
http://support.apple.com/kb/PH2698
Regards,
- Brenden -
The computer is Windows 7 Professional 64-bit edition version 6.1 Build 7601 service pack 1. The computer is not in a domain environment. I believe this may be a security issue however I completed an in-place windows 7 upgrade to try and fix the problem
but after all of the windows updates, etc the error remains and appears every time the computer is rebooted...
I could use some help with the following error:
Log Name: System
Source: Microsoft-Windows-TerminalServices-RemoteConnectionManager
Event ID: 1057
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Description:
The Terminal Server has failed to create a new self signed certificate to be used for Terminal Server authentication on SSL connections. The relevant status code was Object already exists.
Provider Name="Microsoft-Windows-TerminalServices-RemoteConnectionManager"
Guid="{C76BAA63-AE81-421C-B425-340B4B24157F}"
EventSourceName="TermService"
I found {C76BAA63-AE81-421C-B425-340B4B24157F} in my registry in the:
HKey_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> Windows -> CurrentVersion -> WINEVT -> Channels -> Microsoft-Windows-TerminalServices-RemoteConnectionManager/Admin -> OwningPublisher
HKey_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> Windows -> CurrentVersion -> WINEVT -> Channels -> Microsoft-Windows-TerminalServices-RemoteConnectionManager/Analytic -> OwningPublisher
HKey_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> Windows -> CurrentVersion -> WINEVT -> Channels -> Microsoft-Windows-TerminalServices-RemoteConnectionManager/Debug -> OwningPublisher
HKey_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> Windows -> CurrentVersion -> WINEVT -> Channels -> Microsoft-Windows-TerminalServices-RemoteConnectionManager/Operational -> OwningPublisher
Microsoft-Windows-TerminalServices-RemoteConnectionManager
%SystemRoot%\system32\termsrv.dll
When I open as administrator a command prompt window and enter the follow: regsvr32 termsrv.dll
I get the following message:
RegSvr32
The module termsrv.dll was loaded but the entry-point DllRegisterServer was not found.
Make sure that termsrv.dll is a valid DLL or OCX file and then try again.
Not sure if this is a problem or if this behavior is expected...
I ran sfc /scannow and check disk on the hard drive with both reporting no errors.
I updated the security profile for:
[Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security]
In the right pane, double click "Require use of specific security layer for remote (RDP) connections", in the security layer list, select RDP.
I modified the policy and there was no change in computer behavior. The error still appears each time the computer is reboot.
===
I found a semi-related webpage that at least lists the same Microsoft-Windows-TerminalServices-RemoteConnectionManager and 1057. However I'm running Windows 7 64-bit edition and I seriously doubt I have a lack of available memory issue.
Event ID 1057 — Terminal Services Authentication and Encryption
http://technet.microsoft.com/en-us/library/cc775192%28v=ws.10%29.aspx
Physical Memory (MB)
Total 24567
Cached 6337
Avaiable 21821
Free 15709
The relevant status code says that the "Object already exists" which I think is far more relevant then some memory issue. Do I have to delete some file or registry entry? Or is it a security issue?
Google search have come up with nothing. Any suggestions would be very helpful!Have a solution for you:
Download makecert.exe and generate new cert for RDP
makecert -r -pe -n "CN=server FQDN" -eku 1.3.6.1.5.5.7.3.1 -ss my -sr LocalMachine -sky exchange -sp "Microsoft RSA SChannel Cryptographic Provider" -sy 12"
Change server FQDN with real value.
Go to computer certificates and under remote desktop delete current certificate. Then from personal store move the newly created cert to Remote Desktop. Open the cert and copy Thumbprint.
Open regedit and go to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations
Update SelfSignedCertificate key with new cert tumbprint.
Restart Remote Desktop Services service
Maybe you are looking for
-
TS4403 My Apple ID is not an icloud account. How do I set up an icloud account?
I am trying to set up an icloud account on a Win7PC, so I can share photos with my family who are on ipads. I have followed the instructions several times on how to get started on icloud, how to set up an Apple ID (which I was able to do), and I just
-
Search functionality in Talent Hub for Executive
We are in process of implementation of NAKISA 4.0 on ECC 6.0 EHP5 and EP 7.3 EHP1. We did all required configurations for Talent Hub for Executive and also configured TREX as per Mr. Luke Marson blog http://scn.sap.com/community/erp/hcm/blog/2010/09/
-
How do I fix problems with iTunes Store timing out when I search for music?
So, I downloaded iOS 7 not too long ago. However, when I tried to do a search on the iTunes Store app, it keeps timing out (it also stalls when I attempt view a song list on a specific album. My phone has no cosmetic or liquid damage, and. I have alr
-
How to reset the password on a PowerBook 1400c.
I recently inherited an old powerbook 1400c from a relative which passed, and am trying to reset the password in order to use the machine. I know that I could purchase the original os floppies, however I am not so keen on the $60+ I would spend to d
-
Loss of speaker sound with soundblaster li
hello;I have just incurred another incident as to where my speakers went dead and I lost the sound in my soundblaster li've! software. I recieved an error message "there is no mixer device detected on this system", system mixer will? now exit. when I