What do the Request Nos in Change Log table mean?

Hi,
I'm checking the change log tables of some ODSs. In the "Request" column, there are requests starting with ODSR* and REQU. These numbers are the same as the ones seen in the Manage screen under the "PSA Request Number" and "Request Number" cols respectively. I want to know, when does data come under the ODSR requests and when does it come under the REQU* requests.
BW version: 3.5

Hi,
The changelog of the ods is actually the PSA for the export datasource.That may happen in case of ODS. For ODS change log data and PSA (for subsequent target from this ODS) are stored in the same table (change-log of the ODS table) . Those data are identified in the same table as "ODSR" for change log entries and "REQU" for PSA entries.
Hope it helps..

Similar Messages

  • Where to see the images other than change log table

    Dear all,
                   How to view images for extraction's (example Generic )  in  DSO without using Change log table.
    With Regards,
    Baskaran

    Hi,
    There is no other option other than change log table to view the images.
    in PSA..we will get only raw data..i.e...its non other than the data how its posted in source sytem.we can say..this is only copy of source sytem data.
    after PSA,if the datasource is DELTA enabled(which can sustain NEW or CHANGED records-here only we get concept of IMAGES),we have to load this data only to DSO.from there after activation of the data,the data can be updated to further data targets only from CHANGE LOG table which can maintain images.
    Even further targets are also DSOs,we will have to load from this DSO only.so we can see images only in change log table.
    hope this is clear for you.
    Regards
    Ramsunder

  • Can we delete the change log table of ods?

    hi bw gurus,
    can we delete the newdata,active and change log table of ods?how?what is the advantage?
           OR
    can we delete the contents of new,active,change log table of ods?how?what is the advantag?
    thanks in advance
    srinivas

    Hi Srinivas
    Yes, You can delete the contents of changle log table but not the contents of new data and active data table.
    Before deleting the change log data you have to make sure that the requests are not required for further delta extraction or for reconstruction purpose.
    Steps
    1. Goto Manage screen of your ods
    2. Click on Environment tab and select the option " Delete change log data".
    Adv:
    To free up the disk space.
    Assign points if it is useful for u.
    Regards
    Saddy

  • How to find out the top ten Change log tables in BW

    I want to know the top ten change log tables in terms of size. Do we have a SAP standard table where we have the following fields : "changlog table name", "number of records" field or "data in size" field.
    Regards,
    Prashant M J

    Hi,
    Click on change log table in the ODS/DSO at the top you see the name as /bic* which is the name of the database table which could also be seen at SE11.
    If you wana see the requests in this change log use rstsodsrequest
    and if you wana see the size in terms of kb, mb DB02 or st04
    use the table name /bic* and click on tables and indexes option in history tab
    DB02 tells you the sizes of the tables present on database. Incase you are not able to your basis team would help you in that
    Thanks and regards
    Kiran

  • Need suggestion to get data from change log table of ODS.

    Hello,
    There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
    Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
    While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
    Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
    I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
    Please let me know if you have any suggestions.
    Regards,
    Sanjay Chaurasia.

    Hi,
    You can use the changelog table of the DSO.
    Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
    In the update rule Routine, give the tech name of Change log table instead of Active table name.
    Hope it helps.
    Krishna

  • How to update the change log table?

    Hi
    I am doing some manipulation on the ODS records and writing few new records directly into the active table of my ODS. how do i update the change log table so that i can do a delta from my ODS to further data targets??
    i see the fields REQUEST, DATAPAKID, PARTNO and RECORD in the change log table. what values should these fields have for my new records??
    Regards
    Sujai

    Hi,
    Please try this option. In stead of writing directly into DSO, do it in another Custom Z DSO. From there, do the FULL load to your previous DSO. This will ensure that the data consistence through the system. Also, do not forget to delete the data from Custom Z DSO once you successfully loaded the data.
    Thanks,
    Saru
    Edited by: P. Saravana Kumar on Apr 1, 2009 6:23 PM

  • What is the proper way to change rowHeight? (possibly animate?)

    What is the proper way to change rowHeight for UITableView? I set tableView.rowHeight and do a [tableView reloadData]. Is this necessary? Also, is it possible to animate the height change? It is not a standard transition.

    Not a perfect solution for your animation question - but....
    in the function where you want to change the height
    WARNING PSUDO CODE
    //indexPath is the path for theCell you want to edit
    thePlaceThatYouStoreYourHeights[x] = aNewHeight;
    [tableView deleteRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationFade];
    [tableView insertRowsAtIndexPaths:[NSArray arrayWithObject:indexPath] withRowAnimation:UITableViewRowAnimationTop];
    and inside of - (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath (NSIndexPath *)indexPath
    return thePlaceThatYouStoreYourHeights[indexPath.row];
    Basic flow
    1. Store new desired height somewhere
    2. Remove the cell deleteRowsAtIndexPaths
    3. UITableView paints the animation for the "remove" transition **see note
    4. Re-add the cell insertRowsAtIndexPaths (which subsequently kicks of a call to heightForRowAtIndexPath before animating)
    5. UITableView paints the animation for the "add" transition
    You do NOT need to call reloadData to get this to work.
    **note: an enum such as UITableViewRowAnimationNone does not exist (it should but it doesnt seem to). the docs for InsertRowsAtIndexPaths say "A constant that either specifies the kind of animation to perform when inserting the cell or requests no animation." however there are only 5 items in the UITableViewRowAnimation enum and UITableViewRowAnimationFade resolves to 0 - so passing NO will actually get you fade. Nor will it take nil.
    Hope this helps shed some light.

  • Error while accessing SharePoint 2013 news feed REST api - "The server encountered an error processing the request. See server logs for more details."

    Hi Experts,
    I am facing an issue while accessing SharePoint 2013 news feed REST api URL <SiteCollectionURL>/_api/social.feed/my/news from browser giving error "The server encountered an
    error processing the request. See server logs for more details."
    This is happening after posting the image to news feed without entering any text or description with that. If i post an image with some text or description, then i can able to get the feeds. Or else if i delete the image post then also i can able to get
    the feeds.
    I can able to see below logs in log files.
    Exception occured in scope Microsoft.Office.Server.Social.SPSocialRestFeed._SerializeToOData. Exception=System.MissingMethodException: No parameterless constructor defined for this object.     at System.RuntimeTypeHandle.CreateInstance(RuntimeType
    type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)     at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache,
    StackCrawlMark& stackMark)     at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)     at System.Activator.CreateInstance(Type type, Boolean nonPublic)
        at System.Activator.CreateInstance(Type type)     at Microsoft.SharePoint.C...
    ...lient.ValueTypeConverter.<GetODataProperties>d__2.MoveNext()     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection,
    Action beforePropertiesAction, Action afterPropertiesAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties)    
    at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteComplexValue(ODataComplexValue complexValue, IEdmTypeReference metadataTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection, Action beforeValueAction, Action afterValueAction,
    DuplicatePropertyNamesChecker duplicatePropertyNa...
    ...mesChecker, CollectionWithoutExpectedTypeValidator collectionValidator, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties)     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperty(ODataProperty
    property, IEdmStructuredType owningType, Boolean isTopLevel, Boolean isWritingCollection, Action beforePropertyAction, EpmValueCache epmValueCache, EpmSourcePathSegment epmParentSourcePathSegment, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker,
    ProjectedPropertiesAnnotation projectedProperties)     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection, Action beforePropertie...
    ...sAction, Action afterPropertiesAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties)     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteComplexValue(ODataComplexValue
    complexValue, IEdmTypeReference metadataTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection, Action beforeValueAction, Action afterValueAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, CollectionWithoutExpectedTypeValidator
    collectionValidator, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties)     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSeriali...
    ...zer.WriteCollectionValue(ODataCollectionValue collectionValue, IEdmTypeReference propertyTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection)     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperty(ODataProperty
    property, IEdmStructuredType owningType, Boolean isTopLevel, Boolean isWritingCollection, Action beforePropertyAction, EpmValueCache epmValueCache, EpmSourcePathSegment epmParentSourcePathSegment, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker,
    ProjectedPropertiesAnnotation projectedProperties)     at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection, Action beforePropertiesAction,
    Action afterPropertiesAct...
    Can anyone please help me out.
    Thanks!
    dinesh

    O365,
    Is this still an issue?
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • What is the best practice for changing view states?

    I have a component with two Pie Charts that display
    percentages at two specific dates (think start and end values).
    But, I have three views: Start Value only, End Value only, or show
    Both. I am using a ToggleButtonBar to control the display. What is
    the best practice for changing this kind of view state? Right now
    (since this code was inherited), the view states are changed in an
    ActionScript function which sets the visible and includeInLayout
    properties on each Pie Chart based on the selectedIndex of the
    ToggleButtonBar, but, this just doesn't seem like the best way to
    do this - not very dynamic. I'd like to be able to change the state
    based on the name of the selectedItem, in case the order of the
    ToggleButtons changes, and since I am storing the name of the
    selectedItem for future reference.
    Would using States be better? If so, what would be the best
    way to implement this?
    Thanks.

    I would stick with non-states, as I have always heard that
    states are more for smaller components that need to change under
    certain conditions, like a login screen that changes if the user
    needs to register.
    That said, if the UI of what you are dealing with is not
    overly complex, and if it will not become overly complex, maybe
    states is the way to go.
    Looking at your code, I don't think you'll save much in terms
    of lines of code.

  • Power Bi for o365 - Odata connection test worked but "The server encountered an error processing the request. See server logs for more details". Port 8051? Authority\System

    We set up the Data Management Gateway and created a new data source (odata to SQL via sqL user)
    Did a connection test and it was successful!
    Tried the URL (maybe it needs more):
    https://ourdomain.hybridproxy.powerbi.com/ODataService/v1.0/odatatest
    That resolves to some :8051 port address and then spits out this message:
    The server encountered an error processing the request. See server logs for more details.
    I checked and the data management gateway is running.
    Does that 8051 port need to be opened on our firewall for this server? How can I confirm that is the issue.. I see no event on the server indicating this is the issue?
    I am seeing this event:
    Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'PowerBiTest'. [CLIENT: IP of the Server]

    O365,
    Is this still an issue?
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • What is the equivalent for 'On Change of' Event in ABAP OBJECTS?

    What is the equivalent for 'On Change of' Event in ABAP OBJECTS?  and how to use it in LOOP control?

    hi,
    There is no such Equivalent in OO ABAP.
    You have to Raise your own Event within tha class checking the value of the field whose value is changing.
    Regards
    Sumit Agarwal

  • How to get the Change Log Table name of the ODS from the system table

    Hi,
    I have a list of ODSs in the system and I am interested in finding the corresponding Change Log Table and the number of records in that table.
    Can any one please tell me the name of the system table where this information is stored.
    I dont want to get in this information manully (from the Contents tab of the ODS maintenane).
    Regards,
    Harikiran Gunnala

    Hi
    Go to SE16
    Give the table name as "RSTSODS".
    For User application field give CHANGELOG as input
    and execute. You will get all the list of Changelog tables Along with below mentioned data
    PSA
    Version
    To
    Valid from
    Object Status
    Technical ODS name
    Program Name
    Maint  Program
    Object Name
    Last changed by
    UTC Time Stamp in Short Form
    Partition number
    Regards
    Raj

  • What is the request state value to shutdown VM using hyper-v?

    As we know request state value 3 is used to turnoff VM , what is the request state value to shutdown hyper-v VM ? Is there any different ways to shutdown hyper v VM using C# wmi?
    Regards
    Venki

    This forum is for Windows Embedded Standard 8. Please post to the hyper-V forum is here:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
    www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

  • What are the bad Effect of changing sap Standard Programs?

    Hi all,
    I want to know what are the Bad effects of changing SAP standard screen and reports.
    I need a bit theoretical Explanation.
    Please suggest me some good and effective matter link.
    Regards

    Hi sonal,
    If I write the theory here ,might be its going to mess up here.mm..try this link.There are good information in changing a standard functionality.
    http://software.feedfury.com/content/28535477-changing_the_sap_standard.html
    2. I can tell one of like ...
    To change a standard program or functionality or standard field in  sap,we have to go for related user,customer scvren exit etc.
    We have to find the right exit to that particular transaction and do our customized coding there.We have to be very careful,since we are going to change the standard exit.this user exit will be used in 'N' number of other screens and transaction.So when you change , that change will /may affect the other transactions also.If you corrupt that particular exit,there are chances for that transaction to go for a toss.I have experianced this personally.when I was working on particular userxit and editing,that particular transaction was not working properly for others,since i was doing from my login,everyone came to my place and started bugging me to stop working on it:)
    Regards,
    SanthoshSivanathan

  • What is the constant name for Change layout Button in ALV Grid ABAP Objects

    Dear All,
    I have one query please help me.
    what is the constant name for Change layout Button in ALV Grid ABAP Objects.
    With Rgds,
    Babu

    Halo Vinod,
    The consant name is cl_gui_alv_grid=>mc_fc_current_variant.
    Regards
    Arshad

Maybe you are looking for