What do the symbols on the airport utility user interface mean?

I just set up my new 3TB time capsule and notice the number 1 in a red circle next to the time capsule icon in the airport utilitiy user interface. What does this mean? There is also a blinking yellow light next to the TC icon in the same screen of the airport utility GUI but the internet is solid green. The red button was a "2" when I first set up but changed to 1 when I updated the firmware.
Thanks, Gord

notice the number 1 in a red circle next to the time capsule icon in the airport utilitiy user interface. What does this mean?
It means that there is one update available for the Time Capsule. Click directly on the "red 1" and then click Update.
There is also a blinking yellow light next to the TC icon in the same screen
A blinking amber light indicates that the TC has a message for you. To see it, click directly on the amber dot...and another window will open to explain the issue and offer a suggested action to remedy things. It is possible that the "message" is that an update is available for the TC.

Similar Messages

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

The AirPort utility doesn't support my AirPort Express, now what?

The Airport untility set up my new AirPort Express just fine, however, when I try locate my older AirPort Express to extend my network, it says the AirPort Utility doesn't support the older AirPort Express. It's there in the WiFi drop down menu and, trying to confgure it from the existing utility menu bar is fruitless. What now?

Is this another example of Apple's policy of planned obsolesce?

I have 2 airport express base stations that I am trying to use to extend my wifi. I have windows 7 and downloaded the airport utility but it wont pick up my airport express. Does anyone know what im doing wrong and how to get them to work?

I have 2 Airport Base stations that I am trying to use to extend my WiFi but I cant get them to work. I downloade Airport Utility to windows 7 and it doesnt recognize any devices. I have them plugged in and they have a solid yellow light. Does anyone know what I need to do to get them to work. Your help would be appreciated.

Thanks for providing the model information.
I would recommend that you start by performing a "factory default" reset on all of your AirPort base stations. Once completed power them all down. While powered-down, temporarily connect both Express base stations to an open LAN port on the Extreme using separate Ethernet cables.
Once connected, power up the Extreme; wait five minutes, and then, power up each of the Express base stations. Which you power-up first doesn't matter.
Now start up the AirPort Utility on the PC. It should now "see" all three base stations. If so, go ahead and configure your extended network.
Please post back your results.

The airport utility does not find my Airport Extreme. I tried to reset the base, but I can`t make it. What can i do?

The airport utility does not find my Airport Extreme. I tried to reset the base, but I can`t make it. What can i do?

Please perform a Factory Default Reset exactly as follows:
Pull the power plug from the back of the AirPort Extreme (AEBS)
Wait a minute
Hold in the reset button first and continue to hold it in for at least 7-8 more seconds while you simultaneously plug the power back in to the AEBS
Release the reset button after the 7-8 second hold period
Allow 30-45 seconds for the AEBS to restart
Temporarily, connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the AEBS
Open AirPort Utility to see if can now see the AEBS

So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

What program(s) opens the airport utility download file

I am installing on PC and have nothing to open a dmg file - any suggestions

1} do I bypass the router and hook the Airport Extreme directly to the phone line or
That won't work as the Extreme does not have a built-in modem. Your older router must be a combination modem & router or gateway device.
2) (as the guide suggests) connect an ethernet cord from the LAN output on the existing router to the WAN input on the Airport - I have tried both with no success so
This is the correct connection for the Ethernet cable. The key now is to reconfigure the Extreme as a bridge. This will allow the existing router to continue to provide the necessary NAT & DHCP services for network clients connected to either router to gain Internet access.
To configure the Extreme as a bridge, either connect to the Extreme's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the Extreme, and then, using the AirPort Utility, change the following these setting:
AirPort Utility (v5.x) > Select the Extreme > Manual Setup > Internet > Internet Connection tab
Connection Sharing: Off (Bridge Mode)
Click Update to apply the new settings.

HT1998 My iPAD can use the internet through my airport extreme, but the airport utility does not see it so I can't create a guest password. What am I doing wrong?

My iPAD can use the internet through my Airport Extreme, but the Airport Utility does not see the device so I can't set a guest password.

If your Mac is using the Lion operating system with recent updates, it will be necessary to download and install AirPort Utility 5.6 for Mac OS X Lion
Open Macintosh HD > Applications > Utilities > AirPort Utility 5.6
Select the AirPort Extreme and click Manual Setup
Click the Wireless tab just below the row of icons
Click the Wireless Network Options button
Remove the check mark next to Create a closed network
Click Done, then click Update to save the new settings and allow 25-30 seconds for the AirPort Extreme to restart

How do I configure the Airport utility to allow more than one rule per port?

How do I configure the Airport Utility (AU) to allow more than one rule per port?
I am on a home network, with broadband cable modem. I have my airport extreme connected to the broadband modem. I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols. The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists".
I need to be able to allow SSH on both of my servers, for instance. Am I missing something? Is this doable with AU?
Thanks for any insight.
Khalid

The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
What you won't be able to do is map a single or multiple ports to multiple IP addresses.

My MacBook Pro is currently online via wifi, but the airport utility doesn't recognize the airport time capsule base station and has not backed up in 10 days

My early 2011 MacBook Pro 15 inch is currently online, with good (albeit slow... although that is due to the service provider) internet connectivity via wifi. The icon shows that I am connected to my network with full bars. I use an Airport Time Capsule as my wireless router, purchased late last year, and it has worked well until now. Internet comes via cable modem (provided by the cable company), and can be patchy and quirky, so I am often rebooting the modem, but the airport wifi router typically does not need to be rebooted with the modem to regain connectivity.
My problem is that my time capsule has not backed up in more than 10 days. When I went to investigate this, it claims it cannot find the time capsule. when I open the airport utility on the laptop it claims there is no airport connected (although there is the green light next to the internet icon). I checked on this using the airport utility app on my iPad, and it has no problem identifying the router as an airport time capsule. I did update the firmware on the router using the app on the iPad, but it made no difference to the laptop.
First question: Do you think this is a problem with the Airport router or my MacBook?
Second Question: what can I do about it?
My MacBook feels like it is on its last legs anyway, so I am currently looking at replacements, but I really want to make sure it is backed up in case it dies before the new one arrives!! On the other hand, we have serious power issues here, and while the router is on a UPS, the UPS battery is basically fried and conks out in about 5 minutes, so the Airport is constantly being cycled on and off, which I worry could also be causing problems with the proper operation of the device (although the fact that it works with the iPad makes me think that is not the case... but I don't really know).
Thanks!

My early 2011 MacBook Pro 15 inch is currently online, with good (albeit slow... although that is due to the service provider) internet connectivity via wifi. The icon shows that I am connected to my network with full bars. I use an Airport Time Capsule as my wireless router, purchased late last year, and it has worked well until now. Internet comes via cable modem (provided by the cable company), and can be patchy and quirky, so I am often rebooting the modem, but the airport wifi router typically does not need to be rebooted with the modem to regain connectivity.
My problem is that my time capsule has not backed up in more than 10 days. When I went to investigate this, it claims it cannot find the time capsule. when I open the airport utility on the laptop it claims there is no airport connected (although there is the green light next to the internet icon). I checked on this using the airport utility app on my iPad, and it has no problem identifying the router as an airport time capsule. I did update the firmware on the router using the app on the iPad, but it made no difference to the laptop.
First question: Do you think this is a problem with the Airport router or my MacBook?
Second Question: what can I do about it?
My MacBook feels like it is on its last legs anyway, so I am currently looking at replacements, but I really want to make sure it is backed up in case it dies before the new one arrives!! On the other hand, we have serious power issues here, and while the router is on a UPS, the UPS battery is basically fried and conks out in about 5 minutes, so the Airport is constantly being cycled on and off, which I worry could also be causing problems with the proper operation of the device (although the fact that it works with the iPad makes me think that is not the case... but I don't really know).
Thanks!

I am trying to use share a Hitachi TourPro 2tb external hd using my Airport Extreme base station. I can't get the hd to appear in the disks section of the airport utility though.

I've tried using a powered and non-powered USB hub without success. Plugging the hd directly into the airport didn't work either. The hd functions fine when plugged into a USB port on 3 other computers so it doesn't appear to be a hd issue. I've reset the airport with and without the hd attached but no success in getting the hd to appear in the airport utility. I followed all of the instructions in Apple's Airport support section but no luck.
All my pc's are running on XP Pro (service pack3). The airport extreame is working flawlessly except for this one particular issue which, unfortunately, was one of the main reasons I purchased it. I've looked through numerous discussions already in the community and tried some suggestions such as attempting to map the drive using the airport's IP address but still no luck.
Does anyone have any suggestions or can tell me what I'm missing in the set-up process?

When trying to troubleshoot my problem I discovered a forum that was saying certain NTFS drives work just fine
Apple support says that an NTFS or exFAT drive cannot be used when connected to the AirPort Extreme.
I suppose it is possible that someone might have been using some type of special software on the drive that might perform a "conversion", but without more details, it is hard to know.
Note: ExFAT and NTFS formats aren't supported.
http://support.apple.com/kb/HT2426

Since I upgraded to Lion 10.7.2, my external HD is no longer visible in AirPort utility (in the AirPort disks tab). I also installed the AirPort utility for iOS5, it reported a disk problem, but running Disk Utility on the Mac showed no issues. Help!

To expand on the question, I have performed the following steps:
1 - Unplugged external drive (1TB WD MyBook) from the Time Capsule
2 - Reconnected it. At this point, AirPort utility for iOS5 reported a problem with the disk (Time Capsule light was blinking Orange)
3 - Unplugged external drive, connected it to MacBook Pro, ran Disk Utility. It found no problems (disk visible straight away on the MacBook Pro).
4 - Reconnected to Time Capsule - still doesn't show up under the "Disks" option under Air Port utility. Or rather, the hardware is visible (i.e the physical disk) but not the volume.
5 - I tried another external hard drive, and the volume also doesn't appear in the Disk section under the AirPort utility.
The WD disk is formatted as Mac OS Extended (Journaled).
This is a big problem for me, as the drive houses my iTunes library.
Anyone else had a similar problem? It all worked flawlessly until last week.

I love computers.
Have managed to fix this already. Been working the issue for a few days now, and a few minutes after writing the above post I decided to reset the Time Capsule to factory default settings.
After entering all my details again (used same network names, passwords etc) the Time Capsule was rebooted. When it came back on line - guess what? Yep, the MyBook WD drive is now visibile. I can connect via the network from my other machines to the drive, and iTunes is back.
So - thought I would post my resolution in case it helps others.

My time capsule will allow only one machine to connect to the internet at a time. Connection sharing is "off" on the Airport Utility. When I try to share an IP address I get the message that "DHCP range that I entered conflicts with the WAN IP address" I

Suddenly, my time capsule will not allow more than one computer to connect to the internet at a time. On the Airport Utility on the internet tab, Connection Sharing is "Off (Bridge Mode)" When I try to change it to sharing an IP address, I get two messages that the beginning and ending DHCP addresses that the DHCP addresses I've entered conflict with the WAN address of my Apple wireless device."
Any ideas?
Thanks

I use a DSL to connect to the internet. The modem is a Westell C90-810030-06. Two things happened in connection with the fail. I upgraded the firmware in both my Time Capsule (connected to the DSL) and the Airport Extreme (connected to my printer--used to extend the network). I also upgraded my Colof Nook to the Android Faux Tablet version. I can't imagine that that is creating some sort of mismatch.
I have now downgraded the firmware on the Time Capsule to 7.4.1 which is what I had before. Fortunately, I found the trick to downloading the older airport utility to find the older firmware. All the older versions disappeared from my computers.
I still have the same problem. Wifi works fine. If a second device connects to the wifi, then it works fine, but the first no longer has a connection.
And my Airport Extreme is not working at all. It cannot be seen by the computer. I tried resetting it. I'm going to connect it by ethernet and downgrade the firmware on it.
I appreciate any help. This is so frustrating.

HT1145 I downloaded the Airport Utility 5.6 for OS X Lion and when I finish installing it sends a message that says "the instalation failed contact your software provider"

I downloaded the Airport Utility 5.6 for OS X Lion and when I finish installing it sends a message that says "the instalation failed contact your software provider" And seems like thats the solution so I can use my time capsule.
Thanks

Thanks. Please review my post above to see that we asked five basic questions.
Looks like we got two answers.
Can you please provide answers to the other questions that we asked?
1) Are you trying to connect your Time Capsule to your modem using an Ethernet cable?
2) What is the make and model number of your modem?
3) Are you still using Lion (10.7.5) as you indicate in your profile, or have you updated to Mountain Lion or Mavericks?
I understand that things appear clear to you there, but we cannot read your mind or see your network, so we only know as much about your problem and your network as you can tell us.

Can I use accounts in the Airport Utility to keep backup from multiple macs separate and separate?

Can I use accounts in the Airport Utility to keep backup from multiple macs separate and separate?

Backups from multiple Macs are always kept separate. Each Mac TM will create its own sparsebundle and will not interfere with others.
Using the accounts in AU will simply make each sparsebundle only accessible to that user.. ie it is a purely a security measure.. that is so weak as to be useless .. anyone can bypass it by pressing the reset for 1sec.
And what it will do is cut off everyone from their existing backups.. you will be warned when you set it up that what is about to happen may not be 100% goodness.. pay attention.. it is not.

What do the symbols on the airport utility user interface mean?

Similar Messages

Maybe you are looking for