What do these resets reset?

Bondi Blue Revision B has two tiny reset buttons between the ethernet port and the telephone port. The upper one has a black triangle (◀) and the lower one has a circle with a V-like symbol in it. The upper reset goes to something called "S3 Reset" on the logic board, and I can't see what the lower one goes to.
Any idea what these do? What do they reset, and are there specific instructions for doing the resets?
Thanks in advance!

Hey S.U.,
The upper triangle button is the reset button. Here's the description from the Service Source:
"12 Chapter 1
Restart the computer.
Often you can eliminate a problem simply by restarting your computer, which clears the computer’s memory. Always try restarting the proper way:
1 If you can, save any open documents before restarting.
2 Open the Special menu and choose Restart.
Note: You can also press the power button (picture of the power button symbol) on your Apple USB keyboard or on the
front of the computer.
A dialog box appears.
(picture of shutdown dialog box)
3 Click Restart.
If the computer freezes: Try quitting open applications. See “Quit open applications.” onpage 13.
Force your computer to restart.
m If you are unable to restart your computer as described above, try pressing the
Command (command symbol) and Control keys simultaneously while also pressing the power button (power button symbol) on your Apple USB keyboard or on the front of the computer.
m Open the cover on the side of your computer and locate the Reset hole (it’s the upper hole on the right side, between the Ethernet and modem ports). Carefully insert the end
of a large straightened paper clip into the hole and push gently. Do not use excessive force. Your computer should restart.
m If neither of the above suggestions work, unplug your computer. Wait at least 30 seconds,
then reconnect the power plug and turn your computer on by pressing the power
button (¨) on your Apple USB keyboard or on the front of the computer.
If this doesn’t solve your problem, return to “Problems” on page 7."
The lower button is referred to in the manual as the "interrupt"button. There is no other reference to it in the manual but it reminds me of the "program interrupt button" or the programer's button on the old Bondi Macs G3s.
http://en.wikipedia.org/wiki/Programmer%27s_key
If you Google those terms you'd find a lot of info.
Richard

Similar Messages

  • Does Apple charge a dollar to reset the apple id password? What are these $1.00 charges from itunes for? No purchases of movie books music etc. found on itunes.

    Does Apple charge a dollar to reset the apple id password? What are these $1.00 charges from itunes for? No purchases of movie books music etc. found on itunes.

    Found the answer.

  • On an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?

    on an pci_mio 16e4 programming using nidaq & visual basic, after using AI_Setup analog sequential data accusition stops.To restart I use Init_DA_Brds This takes a long time, What must I reset to restore the analog sequential function?
    I belive that the trigger is being changed on the io board, but cannot manage to reset it.
    The reset process takes in the order of 0.1 sec, and since this is a time critical application, i want to get the scanning function working again faster

    Dear Ian. Thank you for your reply. The problem appears to be that the scan trigger(s) are stopped, or something, by the use of the AI_setup instruction. The sytstem works perfectly until this instruction is used. My problem is in understanding what has happened since the help seems to give no detail on any interconnection between the scan system and the external analog trigger system. I have tried to reconnect the triggers, but so far unsucessfuly

  • HT201406 What if the reset button not responding.?

    WHat if I reset my iPhone 4 ,it is not working it still has a circle for long time and cannot do anything now?

    Um, you can't.  You need to get the device to Apple for service.

  • What is the reset keyboard dictionary for (settings reset reset keyboard dictionary) ??

    What is the reset keyboard dictionary option for? (settings> general> reset> reset keyboard dictionary)

    It removes any words that you've added to the user dictionary :
    You add words to the keyboard dictionary by rejecting words iPad suggests as you type. Tap a word to reject the correction and add the word to the keyboard dictionary. Resetting the keyboard dictionary erases all words you’ve added.

  • What if i reset my iphone 4, will it delete everything

    What if I reset my iPhone, will I delete everything

    A reset, as described in the basic section of the manual, will delete nothing.  It is much like rebooting your computer.
    Resetting all content and settings, will erase everything.
    A restore will erase everything and reinstall the iOS.

  • What are these blue box question marks?

    What are these blue box question marks appearing on some websites?
    They seem to not appear on every website I visit, only some.
    I have tried several troubleshooting steps.
    -I reset cache.
    -I changed text encoding.
    -I checked bos to always display images.
    -I went to "develop" and opened in every other browser.
    -I updated my adobe flash player.
    What else can I do?
    It is so annoying!
    I am running Safari 8.0.
    Thank you!

    Here is a screenshot of the page:

  • What are these processes and how do I prevent them?

    For many years, many have complained of external drives that are in standby/sleep spinning up for no apparent reason.  From the user's point of view this is unnecesssary, but to make matters worse, the system usually stops everything else while waiting for the drives.
    I have a Mac mini that I use as a home theater pc.  The media and backups are on a 5-bay enclosure (no RAID) attached by USB.  While watching a video, the unused drives will go into standby mode, which is good.  But then, with no user activity, they will spin up, freezing the video and everything else, which is not good.  As these are slow drives and spin up sequentially, this can take 10-20 seconds.  This may happen once or twice an hour, but sometimes more frequently.
    In looking into the causes, I have turned off time Machine (after putting these drives into the Privacy section for good measure).  I also prevented Spotlight and fsevents logging with the following:
    mdutil -i off /Volumes/<drive1> /Volumes/<drive2> . . .
    cd /Volumes/<drive1 and then repeat for other drives>
         rm -rf .fseventsd .Spotlight-*
         mkdir .fseventsd
         touch .fseventsd/no_log .metadata_never_index
    As far as I can tell this has worked to stop those processes from accessing the drives after they are mounted, but the problem persists.  To find out what else might be causing them to wake up:
    sudo fs_usage -w | grep -e Volumes/<drive1> -e /Volumes/<drive2> . . .
    and here is what I found last night (actually didn't use the -w last night, thus it is cut off):
    18:35:36  fsgetpath   /Volumes/XBMC         0.000026   SSDragHelper
    18:35:36  fsgetpath   /Volumes/Stuff        0.000006   SSDragHelper
    18:35:36  fsgetpath   /Volumes/DatOptic_3   0.000005   SSDragHelper
    18:35:36  fsgetpath   /Volumes/MacBackUp    0.000003   SSDragHelper
    18:36:15  fsgetpath   /Volumes/XBMC         0.000026   System Prefe
    18:36:15  fsgetpath   /Volumes/Stuff        0.000004   System Prefe
    18:36:15  fsgetpath   /Volumes/DatOptic_3   0.000003   System Prefe
    18:36:15  fsgetpath   /Volumes/MacBackUp    0.000003   System Prefe
    18:55:36  fsgetpath   /Volumes/XBMC         0.000034   GoogleSoftwa
    18:55:36  fsgetpath   /Volumes/Stuff        0.000004   GoogleSoftwa
    18:55:36  fsgetpath   /Volumes/DatOptic_3   0.000003   GoogleSoftwa
    18:55:36  fsgetpath   /Volumes/MacBackUp    0.000003   GoogleSoftwa
    After looking into the Google process, I was surprised to find the tentacles that Google puts into your system, and ripped every bit of it out that I could.  But I have no idea about what's going on with SSDragHelper and System Prefe (presumable System Preferences).  This must be OS X itself?  What are these processes doing, and is there any way to prevent them from accessing these disks in this way?

    Thanks for the reply Hen3ry.  Looks like you've done a lot of investigation.  For me, fs_usage entries accompanying spindown are not problems - I'm happy if the drives spin down.  My problem is the spinups.  But still, I don't think it is necessary to time the fs_usage entries with spinups.  If you grep for the drives you're concerned about, you will see any process that would potentially wake them up.
    Because my understanding is limited, I also am more concerned with the process/application that is accessing the drives than with the functions or commands they are sending.  And the values that are returned by those functions are way beyond what I can deal with.
    It's interesting that you've found a difference between your old and new drives.  Could you specify the enclosure and drives in each case?
    The StorageStatus app looks interesting; thanks for the tip.
    Here's a summary of what I've done so far, which I think is working.  I need a few more weeks to know for sure.
    How to prevent unwanted drive spin-ups
    If you are actively using the computer that the enclosure is attached to, nothing on God’s green earth will stop OS X from waking them up after some user action, even ones that seem to have nothing to do with the external drives.  But if you leave the computer alone while some application is running, like watching a movie or downloading a file, you have a fighting chance of coaxing OS X into leaving the uninvolved drives alone.
    If the drives are shared with any other computers over a network, eject them on those computers
    Otherwise, OS X (AppleFileServer) will poll them every 10 seconds.  This might not be bad if you want to just keep the drives spinning and the other computer stays awake.
    Third-party apps
    Make sure no apps are running that might access your drives.  Google runs some processes that do this (maybe I’m naïve, but I was so shocked I removed chrome and every other trace of Google from my Mac mini system). Another is iStat and any utility that monitors SMART status in the background.
    Don’t let Spotlight index or search the drives
    Spotlight is persistent, and it may be necessary to take a variety of steps to stop its various processes (mds, mdworker) from accessing the drives and waking them up.  In other words, kill it, drive a stake through its heart, then burn the body:
    In System Preferences > Spotlight, add the drives to the Privacy pane.
    Add a file called .metadata_never_index to the root of each drive (note the leading period).  The easiest way to do this is in Terminal
    touch /Volumes/<drive1>/.metadata_never_index
    Tell Spotlight AGAIN to keep away from the drive:
    mdutil -i off /Volumes/<drive1> /Volumes/<drive2> . . .
    Finally delete the Spotlight folder from the drive.
    rm -rf /Volumes/<drive1>.Spotlight-*
    Stop fseventsd from logging in the drive
    This is easy, just putting a no_log file in its folder.  I have found that rarely it still writes some files in there, but it doesn’t seem to do so when it causes problems, so . . .
              rm –rf /Volumes/<drive1>/.fseventsd/*
         touch /Volumes/<drive1>/.fseventsd/no_log
    Finder sidebar
    Some people say that if the drives show in the Sidebar of Finder windows, the Finder will be checking them.  I’m not sure. But to be safe, in Finder Preferences > Sidebar, uncheck External Disks.
    Just say no to Time Machine
    On the home theater mac itself, regular backups shouldn’t be needed.  You should be able to just turn Time Machine off.  However, it is probably sufficient to simply open System Preferences > Time Machine > Options and add the drives to the list of locations to exclude from backup.
    Second, local backups can be disabled with
    sudo tmutil disablelocal
    Look for other culprits
    If the problem persists, use fs_usage, which generates a real-time log of filesystem activity. There is so much going on that you need to use grep to restrict the output to entries that involve your drives. The entries that accompany your drive spin-ups are the ones you really want.
    sudo fs_usage -w | grep -e Volumes/<drive1> -e /Volumes/<drive2> . . .
    Now leave the keyboard and mouse alone, as many things you might do will cause the drives to be accessed. You probably want to find what does it when you’re not actively interacting with the computer.  It’s not really necessary to wait for your drives to sleep and see what wakes them.  Any activity you see would probably wake the drives if they were asleep.  When you see some activity and want to stop and examine, type Control-C to stop the output.  On the far right of each entry is the process or application that accessed the disks.
    I got pointers from http://system-log.tyr.org.uk/2012/01/31/how-to-stop-usb-drives-from-spinning-up- unnecessarily-on-os-x-lion/ and http://www.jackenhack.com/disk-that-refuses-to-sleep-in-mac-os-x-how-to-fix-it/

  • Please explain on what does these select statements get from these tables..

    Hello Experts,
    What does these select statements get?and what are these tables CDHDR and CDPOS used for?
    The program that I am currently modifying lets users post documents and the ones that are not posted
    are saved in a custom table. Now, we had a scenario in PROD server wherein certain items are not being
    fetched as bypassed but we saved it in the bypassed table. Anyway, below is the select statements:
    get all change document header within the selected dates
      SELECT * INTO CORRESPONDING FIELDS OF TABLE it_cdhdr
        FROM cdhdr
       WHERE udate IN s_udate
         AND objectclas EQ 'CHARGE'
         AND tcode IN (lc_tcode_msc1,
                       lc_tcode_msc2,
                       lc_tcode_msc1n,
                       lc_tcode_msc2n,
                       lv_tcode_vl33n,
                       'SE38',
                       'ZGENE').
    IF NOT it_cdhdr[] IS INITIAL.
    SELECT objectid changenr value_new
          FROM cdpos
          INTO TABLE it_cdpos
          FOR ALL ENTRIES IN it_cdhdr
         WHERE objectclas EQ it_cdhdr-objectclas
           AND objectid   = it_cdhdr-objectid
           AND changenr   = it_cdhdr-changenr
           AND tabname    = lc_tabname_mcha
           AND fname     IN (lc_fname_zustd,'LWEDT').
    DELETE it_cdpos WHERE value_new+00(01) = 'X'.
      LOOP AT it_cdpos ASSIGNING <fs_cdpos>.
        l_matnr = <fs_cdpos>-objectid+00(18).
        l_charg = <fs_cdpos>-objectid+22(10).
        l_zustd = <fs_cdpos>-value_new+00(01).
        READ TABLE it_batch INTO wa_batch
             WITH KEY matnr = l_matnr
                      charg = l_charg.
        IF sy-subrc EQ 0.
          l_tabix = sy-tabix.
          wa_batch-zustd = l_zustd.
          MODIFY it_batch FROM wa_batch INDEX l_tabix
                 TRANSPORTING zustd.
        ELSE.
          wa_batch-matnr = l_matnr.
          wa_batch-charg = l_charg.
          wa_batch-zustd = l_zustd.
          wa_batch-code  = 'A'.              "selected within period
          APPEND wa_batch TO it_batch.
        ENDIF.
      ENDLOOP.
      ENDIF.

    Hi,
                            The first select statement is for Change document header.CDHDR table contains this object class in your case if you change any batch number for any material number  from the transaction for example (MB01) you can trace this .
    From CDPOS you can trace which tables affected (EX : MCHA) and the new value(l_zustd ).
    Regds,
    Vinsa.R

  • What are these LAUNCH errors, and why won't they go away?

    Hi guys,
    Mucho thanks to anyone who can help me. Here's my problem:
    I went into my Event List and deleted lots of hyperdraw volume automation from many regions, one region at a time. This is the first time I've done this, only reading today how to do it. Now I have two error messages constantly coming up. Neither stops occurring.
    1.
    When reopening the session, the error says this, caps and exclamation points included:
    "LAUNCH Event without associated track found! Changed to track 1."
    -I have to click "ok" for four of these.
    2.
    When trying to change the lengths of regions and a few other normal editing choices, the error says this:
    "Tracknumber of LAUNCH too high!"
    -I have to click "cancel" for eight of these, and I'm never allowed to do the editing.
    So...
    -What do these mean?
    -How do I get rid of them?
    -What is "LAUNCH?"
    -Without knowing it, did I delete some Event info. in those lists that I shouldn't have?
    Random info: I'm running a 47 track session with my audio preferences set to 48 tracks. The CPU handles the load fine, before and now, I'm just getting these errors.
    Thank you!

    I'm pretty much 100% sure that "LAUNCH Event" errors are associated only with MIDI tracks.
    There's one situation I know by heart that will cause such a message and it has to do with joining folders that don't contain exactly the same track count/track assignments.
    I would suggest that in order to get rid of the messages to try the following:
    1. Open your song
    2. Select the first of your MIDI tracks create a duplicate of that track (i.e., create a new track with the same MIDI assignment and then opt-drag the regions in your original region to the new track).
    3. Delete the original track
    4. See if you can now perform your editing operations on it. IF SO, repeat this procedure for the rest of your MIDI tracks.
    Let me know if you try this out, and, how it goes.

  • What are these weird blue dashes?

    What are these weird blue dashes that got inserted into my Pages document since I closed it? They appear with each new paragraph start or break and I can't see how to get rid of them! ( I have OS 10.6.8 and Pages 4.1)

    Probably you used tabs to indent your paragraphs instead of using First Line Indent and you have Show Invisibles turned on:
    Menu > View > Hide Invisibles
    Peter

  • My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for? Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?

    My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for?
    Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?
    I do not have any VPN enabled?

    Do you happen to have an Android?  If so and depending on what version there is a great data usage analyse tool built-in.  See if you can go to Settings -> Data Usage  from there you can pick a current or previous billing cycle and then use the vertical sliders to select a date range and it will filter the usage data per app to show you exactly what app(s) were using data during that time frame.

  • What are these called?

    Hi,
    I am trying to figure out what this element is?  Since I dont know what its actually called I have to provide a picture for my example.
    What are these elements called?  I have pointed to them in my image with the red arrows.  Im pretty sure the horizontal ones are  a "horizontal rule".  But what about the vertical ones?  And how does one implement them in a site?  http://i52.photobucket.com/albums/g29/FartyMcFly/Example.jpg
    Thanks for any answers in advance and I apologize if its something stupidly simple.
    Thanks

    How do I set the length of the border lines.
    I'm afraid there is no support for that in current CSS2 standards.
    You will be able to do it with CSS3 border-images.  But not for a few more years.
    http://www.css3.info/preview/border-image/
    In the meantime, you could put your border on a neighboring division -- see example below:
    http://alt-web.com/TEMPLATES/CSS-Basic-2-column-layout.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • What are these dots on my iPhone 5 SIM tray?

    There are these odd white dots on my inside edge of the SIM tray in my iPhone 5. I don't recall seeing these dots in previous generations of iPhone 5.
    I found a similar thread on MacRumors about this, but there appears to be no answer.
    Here is a picture:
    For my iphone, I have an extra dot (so three dots and a line), so it is not exactly the same.
    What are these? Are these normal? Does your phone's SIM tray have those too? How many dots?

    How do you know about this? How many "configurations" are there  of these dots? This is the first time I had seen it in an iPhone (as compared to previous gens).

  • What do these line in logic pro mean

    What do these lines to the left of tracks that turn light blue when selected mean in Logic pro 9? Can they be turned off? See inserted image.
    Thanks,
    Torrid41

    That did the job!....Thanks so much!!!
    seeren wrote:
    Those indicate control surfaces.  Go into control surface setup to change color or delete those which you may have inadvertantly configured or don't use anymore.  Right click on the header to configure header and deselect the box that shows those, if you want.
    Message was edited by: Torrid41

Maybe you are looking for