What do u do when an ipod becomes disabled

my daughter forgot her passcode and ipod has become disabled how do u fix it

U read the manual.
  http://www.apple.com/support/ipodtouch/assistant/ipodtouch/

Similar Messages

  • What do you do when yoyr ipod is disabled

    what do you do when your ipod is disabled

    Follow the instructions given here:
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen

  • What do I do when my iPod is disabled and keeps asking for a passcode?

    My iPod is disabled and won't turn on with out some passcode please help!!!!

    You need to connect the device to iTunes in recovery mode to bypass the passcode using the instructions in this Apple support document and restore the device.
    iOS: Unable to update or restore
    B-rock

  • What do you do when your iPod is disabled and it says connect to iTunes. And then you connect it and on the computer it says iTunes cannot connect your iPod because it is locked with a passcode

    PLEASE HELP

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • What do I do when my iPod touch wants me to plug into iTunes and asks for a password on the iPod touch and can't do it?

    What do I do when the iPod touch asks to be plugged into it ouch and nothing happens. The PC asks to use password on iPod touch and it can't be done.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • What info is lost when restoring ipod touch to factory settings? games?

    what info is lost when restoring ipod tocuh to factory settings? games?

    Philly_Phan wrote:
    What do YOU think that "factory settings" means?
    Not quite, because you can still redownload all your purchased apps and music.  And everything that is synced from applications on your computer such as your calendar and your contacts can be resynced.

  • What does it mean when your ipod is in recovery mode and how do I solve this problem

    What does it mean when your ipod is in recovery mode and how do I solve this problem?

    Unless you have a backup from which you can restore, yes you will lose all of your data and settings.
    You should be able to sync your content back to the iPad if you have been syncing with iTunes all along. If you don't sync with iTunes, you can download much of your paid content again for free as long as you use the same Apple ID. This explains downloading past purchases.
    http://support.apple.com/kb/ht2519
    Unfortunately, at this point, you must restore the device before you can move on. There is nothing you can do to avoid it now.

  • What does that mean when your iPod only charges when you battery dies? (meaning: when my battery isn't dead it wont charge but when the battery is dead thats the only time it will charge)

    What does that mean when your iPod only charges when you battery dies? (meaning: when my battery isn't dead it wont charge but when the battery is dead thats the only time it will charge)

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar      

  • What do I do when my ipod shows me the white apple logo but doesn't start?

    what do I do when my ipod shows me the white apple logo but dosent start? by the way it ran out of battery but when I plug it in this happens.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT1222 What does it mean when my Ipod shows me an itunes icon but doesn't let me go to my home screen AND when I plug it into my Macbook it tells me my Ipod is in recovery mode AND will not be restored!?!?!?! HELP!!!

    What does it mean when my Ipod shows me an itunes icon but doesn't let me go to my home screen AND when I plug it into my Macbook it tells me my Ipod is in recovery mode AND will not be restored!?!?!?! HELP!!!

    . . . sparse bundle could not be accessed (error -1)

  • What do I do when my iPod classic locks up

    What do I do when my iPod classic locks up?

    Reset the iPod.
    To do this, turn the Hold switch on, then off again and press-and-hold both the Menu and the Select (centre) buttons together for at least ten seconds. You may need to try this a couple of times for it to work.
    If it still doesn't fix it, try the 5Rs procedure, which is explained in the following article; http://www.apple.com/support/ipod/five_rs/classic/

  • What does it mean when the ipod is diabled and says connect to iTunes

    what does it mean when the ipod is diabled and says connect to iTunes

    It means...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • HT1212 What do I do when do ipod screen goes white

    What do I do when do ipod screen goes white

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • What can i do when my ipod will not turn on?

    what can i do when my ipod touch will not turn on?

    Try here:
    iOS: Not responding or does not turn on

  • What do I do when my ipod doesnt turn on?

    What do I do when my Ipod Touch doesn't turn on? It was on charge all day when i was at school, when i came home it wouldn't turn on. What should i do?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              
    It the future use normal font. It is hard to read the large, bold font

Maybe you are looking for

  • How can I convert a track with multiple comps to one new complet audio file

    I have one track that is great - but it is composed of different sections (NOT regions) which are different comps from punching in on different regions -- (you can see the divisions between the comps, and each different comp has its comp number (or n

  • Problems with Active Directory and Windows 2003

    Hello, I'm using Mac OS X Server 10.4.9 with Active Directory bound to a Windows 2003 Active Directory Domain. I can bind successfully to the domain using the graphical interface. Then in Samba I can access shared directories using Windows users. How

  • Drag and drop to multiple targets

    Hi Im trying to create a simple drag and drop app where you can drap a movieclip into multiple areas. This is the code i have so far (taken from a tutorial i found) thats works perfectly for 1 target but not for multiples. I initially tried giving th

  • 2 single selection tables on the same page

    I used the following great article: http://blogs.sun.com/roller/page/winston?entry=single_selectable_row_table_component to create a singlerow select table. But I want 2 of these tables on the same page of my tabset component. On my page i have: priv

  • My origo has changed and is not (0, 0) any more, why?

    It happened when I was attaching MovieClip to the Slide. Some how my origo has changed from (0, 0) which it should be the North West corner of my slide to (435, 322). In the other slides the origo is still (0, 0). How come? Thanx!