What do we change on windows server 2k8 iis7 to fix "Secure Connection Failed" that is appearing with version 37 and 37.0.1?

We host https://www.prereg.net and the recent updates (version 37 and 37.0.1) have caused a "Secure Connection Failed" message to appear. We have contacted our hosting company and our SSL provider (geotrust) and neither of them are able to help with this issue. Can anyone tell us what we might need to alter on our server in order to fix this issue? We have a valid certificate and we have SSL3 and TLS 1.2 enabled.
Thank you very much for your help

The browser console shows:
<blockquote>This site uses the cipher RC4 for encryption, which is deprecated and insecure.</blockquote>
*TLS_RSA_WITH_RC4_128_SHA
Attached screenshot from Nightly with domain added to security.tls.insecure_fallback_hosts
*https://developer.mozilla.org/en-US/Firefox/Releases/36/Site_Compatibility#Security
*https://developer.mozilla.org/en-US/Firefox/Releases/37/Site_Compatibility#Security

Similar Messages

I want to know what happened to my ipod cause for exemple, when I turn on sometimes all the screen appears with lines and everything look like lines and I have to turn off again..

I want to know what happened to my ipod, cause after a while that it was off when I want to run in on it gets lines, like if that would be broken and I have to turn off again..

What generation is your iPod? My sister's 2g/3g(I'm not sure which) was doing something similar, but it would put a different graphic on the screen every time. We took it in to the apple store and they didn't determine what it was. One thing they said to try was to restore it and gradually add content on to see if it's an app or something loaded on it. If that doesn't work then they said it's probably something in the software or firmware. They gave her the option of getting one exactly like the one she had or getting the new one like I have. She ended up getting the new one on sale at target.

Disable OCSP in Windows Server 2008 / IIS7

Is it possible to disable OCSP Stapling on Windows Server 2008 / IIS7?
The problem is that
FF30 does not allow access to a secure site if the server supports OCSP Stapling and the user's computer time is in the past. The error is sec_error_ocsp_future_response. So users are not able to access our site simply because their time is incorrect!
If they don't report the error to us, we can't tell them what to do about it and we lose customers. So we need to disable OCSP Stapling.
I've tried these thing with no luck:
add RequestOCSP of type DWORD and set it to
0 to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters\
certutil –setreg chain\ChainCacheResyncFiletime @now
certutil -urlcache ocsp delete
OCSP Stapling is commonly disabled (for example,
sites such as amazon and google disable it). Please let me know how to disable
OCSP Stapling on IIS7.

Hi, please check on iis.net's forum. You will have a bigger audiance than there. I unfortunaly cant move the thread there.
Thanks you for your understanding
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Windows Server 2008, IIS7, SQL Server 2005 - Will this work?

Hi,
Not super concerned about it being supported at this point, BUT, can I run/install CR XI SP2 on Windows Server 2008, IIS7, SQL Server 2005?
I've reference the System Requirement stuff and it was written before Server 2008 was released.
If it's possible, any help on what to install/not install would be great appreciated.
Thanks,
Mike

Try it. If it works great. As you are using ASP, your app must be using craxdrt.dll. This dll has been retired and no longer ships with CR 2008, so even when the next SP for CR 2008 releases, it will be of no use to you. If the ASP app does not work on the server, you may want to post your query to the Legacy Application Development SDKs forum:
SAP Crystal Reports - Legacy SDKs
and see if anyone can help.
Other than that, the only option will be to go to .NET once SP 1 releases for CR 2008, or use CR 10.5 which bundles with .NET 2008.
Ludek

Announcing the availability of enabling Windows Server 2012 R2 Essentials' integration of Microsoft online services in environments with multiple domain controllers

In Windows Server Essentials 2012 R2, all of our online services integration features, including Azure Active Directory and Office 365, are supported only in environments that
have a single domain controller. In environments with more than one domain controller, integration of these services is blocked due limitations in the user account and password synchronization mechanism in Windows Server Essentials.
I am happy to announce that with the recent Windows August Update released on (8/12/2014, PST), this limitation has been removed. This update adds support for both Azure
Active Directory integration and Office 365 integration features in domain environments consisting of a single domain controller, multiple domain controllers, or Windows Server Essentials as a domain member server.
For more information, please go to
http://support.microsoft.com/kb/2974308

Hi JoeBeck,
Thanks for the comment. Could you please tell which link you clicked to download?
Please go to PinPoint check details and start download
http://pinpoint.microsoft.com/en-US/applications/Dynamics-CRM-Online-Add-in-12884966386
Thanks,
Shanghai Wicresoft

Secure Connection Failed: Error code: ssl_error_illegal_parameter_alert - New problem after website moved to new server.

My website was migrated to a new cloud server last week and after the move visitors to my site using Firefox have been intermittently receiving the following error when visiting a https:// url.
Secure Connection Failed
An error occurred during a connection to www.url.com
SSL peer rejected a handshake message for unacceptable content. (Error code: ssl_error_illegal_parameter_alert)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.
Upon a few refreshes the page may load again but often very slowly and often not all images will load.
The web hosts have tried many things, have had cpanel techs check the server and even set up a new ssl certificate to try and resolve the problem with no luck.
Researching the internet shows that people have faced this issue when upgrading Firefox or with certain AntiVirus software conflicts.
However I can't tell all FF visitors to start altering their config files in order to be able to visit my site.
I don't understand how I didn't have this issue prior to the migration but now something has changed that no one knows how to resolve.
For reference: I am using FF 28.0 and I am not experiencing this SSL error on any other site other than my own since the migration.
Does anyone have any information on what the web host may be able to do to fix this SSL issue that only occurs for FireFox users?
Thank you for any suggestions you may be able to offer.

Still experiencing this problem and hoping someone may have some ideas to try on the server.

Clean Access Server could not establish a secure connection

I have a OOB Real IP GW setup on v4.1.2
I seem to have a problem with the CAS connecting to the CAM although I have added the CAS to the CAM and can manage the CAS from the CAM.
I noticed while troubleshooting client authentication that the client was not being redirected to the logon web page and it had full access to the trusted network from the untrusted authentication vlan. I eventually figured out that if I change the CAS Filter Fallback method from Allow to ignore then it tries to authenticate the client. However the fact that the fallback is activated tells you that something is not right.
I have 2 problems:
A) The clients web page is redirected for authentication but it only lists the domain name in the URL and not the hostname or host IP. In the lab I do not have a DNS server and it would not help as it does not include the hostname in the URL anyway. How do I fix this or perhaps it's related to the 2nd problem.
B) When I manually change the URL by replacing the domain name with the IP of the CAS (untrusted OOB Real IP GW) then I get the following error message when logging on:
Network Error:
Clean Access Server could not establish a secure connection to Clean Access Manager at mydomain.com.
This could be due to one or more of the following reasons: 1) Clean Access Manager certificate has expired 2) Clean Access Manager certificate cannot be trusted or 3) Clean Access Manager cannot be reached.
Please report this to your network administrator.
I would guess the culprit is No 2 but surely the system can run on self signed certificates? I have an NTP server so time is in sync. I have even tried regenerating the cetificates on the CAM
& CAS.
Any ideas?

To overcome problem B, I regenerated the SSL Certificates using the host IP address instead of the name for all the CAM & CAS appliances. This seems to have resolved this problem.
I also SSH'd from each of the CAS's to each of the CAM's from the CLI and it then prompts to permanently store the certificates. I'm not sure it this was necessary though.

I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks

I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks

I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API

The question says it all:
What Are The Minimum Permissions In Order An User To Be Able To Access User Profile Data With JavaScript And REST API.?
In the User Profile -> Permissions there is only the option for "Full Control".

Hi Nikolay,
Thanks for posting your issue, you need to set permissions on User Profiles = Read. Kindly find the below mentioned URLs to get the code and more details on this.
http://www.vrdmn.com/2013/02/sharepoint-2013-working-with-user.html
http://www.vrdmn.com/2013/07/sharepoint-2013-get-userprofile.html
http://sharepoint.stackexchange.com/questions/61714/sharepoint-2013-call-the-rest-api-from-sharepoint-hosted-app
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2013/04/09/how-to-query-sharepoint-2013-using-rest-and-javascript.aspx
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

I'm trying to download vm Fusion 5 so I can run Windows 7 on my new iMac. But I am very inexperienced with computers and was wondering if anyone could help walk me through the process.

I'm trying to download vm Fusion 5 so I can run Windows 7 on my new iMac. But I am very inexperienced with computers and was wondering if anyone could help walk me through the process.

post in the vmware forum or call vmware customer support.

We are receiving a "Secure Connection Failed" error message when using Firefox Version 37.01. What is the remedy?

We have multiple websites that do not launch now as a result of the recent upgrade from Firefox version 36.04 to version 37.01. We received "Secure Connection Failed" error messages which indicate that the connection was interrupted while the page was loading, and that the page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please explain why this is happening, and if a fix will be issued soon by Mozilla, as everything was operating normally prior to the most recent Firefox upgrade. Alternatively, please identify browser settings that can/should be changed in order for Firefox to access these basic Internet sites (that are completely accessible using other browsers such as IE and Google Chrome). Thank you.

''rahuldecoded [[#answer-718441|said]]''
<blockquote>
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message
</blockquote>
FYI, I work with the original poster. I looked at the suggestions on that page but none were the issue. Then I found this thread:
https://support.mozilla.org/en-US/questions/1056488
And that appears to be the problem we and others are having.

Network Error: Clean Access Server could not establish a secure connection to Clean Access Manager

Hello everyone
I am implementing a failover solution of NAC in OOB VG version 4.8, I have 2 CAS and 2 CAM.
The Error I am getting is when I connect to both IP address and the FQDN of the CAS.
===========
Network Error:
Clean Access Server could not establish a secure connection to Clean Access Manager at camsrv3.cadivi.gob.ve.
This could be due to one or more of the following reasons: 1) Clean Access Manager certificate has expired 2) Clean Access Manager certificate cannot be trusted or 3) Clean Access Manager cannot be reached.
Please report this to your network administrator.
==========
For the CAM's I use this names camsrv1 and camsrv2. then generate a CSR in the camsrv1 with the name camsrv3.mycompany.com corresponding to virtual ip and it exported to camsrv2, Install the CA certificate of the company and everything works perfect.
This is the failover configuration
CAM:
Primary:     10.1.206.248 camsrv1.mycompany.com
Secondary: 10.1.206.249 camsrv2.mycompany.com
Virtual:       10.1.206.250 camsrv3.mycompany.com
Then I do exactly the same steps for the CAS's and this is the failover configuration:
Primary:     10.1.216.248 cassrv1.mycompany.com
Secondary: 10.1.216.249 cassrv2.mycompany.com
Virtual:       10.1.216.250 cassrv3.mycompany.com
Then I add the certificate of CAM in the CAS on the tab "Trusted Certificate Authorities" and vice versa.
The communication between all the CAM´s and CAS´s is correct (Primary, Secondary and Virtual). I can ping the IP and the FQDN and I can also manage the CAS through the CAM.
I verify that the time was right in the CAM and the CAS and all good up there.
Appreciate your help
Eduardo Navas

Eduardo,
Bump up the CAS/CAS communications logging on both the CAS and CAMs, and then look in the log files for clues.
On CAM they live in /perfigo/control/tomcat/logs and on CAS in /perfigo/access/tomcat/logs
HTH,
Faisal
If you find this post helpful, please rate so others can find the answer easily

Which home scanner works with windows 8. I have a N676U Cano Scan that will not with 8. Walt.

Which home scanner works with windows 8? I have a N676U Cano Scan that will not with Windows 8. Is there a fix for this? Thanks: Walt.

Hello Walt.
Unfortunately, the CanoScan N676U is not compatible with Windows 8.
For more information, please call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

What is wrong when I keep getting "Secure Connection Failed" message?

Why am I getting the msg "Secure Connection Failed" on most sites I used to be able to access before power outage?

Rename (or delete) secmod.db (secmod.db.old) and maybe also cert8.db (cert8.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the files.
The file ''cert8.db'' stores your user certificates, so if you have user certificates then you may want to export them now and import them after having removed cert8.db.
See Tools > Options > Advanced > Encryption: Certificates: View Certificates
If that works then you can delete the renamed files or undo the changes if you want to revert the process.

No internet access on clients connected with any one Windows server 2k8, 2k8 r2, 2k12, 2k12 r2

I have install AD and DNS, No DHCP on windows server 2008 r2. which has two NIC external and internal.
Domain: mhpd.com
Computer name: win2k8
External
ip: 172.16.31.32/16
gw:172.16.0.1
dns:8.8.8.8
4.2.2.2
Internal:
ip: 172.16.31.31/16
gw: blank
dns:127.0.0.1
IN DNS i have set forwarders 8.8.8.8 and 4.2.2.2 which is succeefully resolved. root hints is ok
Clients configuration(client did not add in ad)
ip:172.16.2.241/16
gw:172.16.31.32
dns:172.16.31.32
Question: I am able to access internet on domain controller cum server 2008. But on client computer display yellow symbol on lan icon and no internet access ping win2k8 successful.
ping win2k8.mhpd.com successful. ping 8.8.8.8 or ping google.com request time out.
what is problem in my configuration?

Hi haresh,
First, the network is overlapped on your computer.
Second, AD DS is not recommended to be installed on a multihomed computer.
Both of these will cause conmunication issues.
You may need to re-plan your network.
Best Regards.
Steven Lee
TechNet Community Support

What do we change on windows server 2k8 iis7 to fix "Secure Connection Failed" that is appearing with version 37 and 37.0.1?

Similar Messages

Maybe you are looking for