What do you do after the complete wipeout?

My jailbroken iphone 3gs was recently system restored and now it's stuck on the emergency call screen. I dont have a at&t account but i do have a tmobile account. I'm such a noob at this so what do I do next cause I don't wanna accidently crash it again?

Your phone has be re-locked to AT&T. One of the downsides to hacking an iPhone is that updating software or restoring the phone will re-lock it to the carrier it was originally locked to. You'll have to get an AT&T sim to activate the phone, otherwise you'll only be able to make emergency calls to 911.

Similar Messages

TS3074 what do you do after you have done all of this and still have not resolved the issue?

what do you do after you have done all of this and still have no resolved the issue? itunes still will not load, or reinstall. i have updated my computers OS to the posted above settings for Vista. still gives error code 1114. NOTE!: My itunes WORKED JUST FINE UNTIL a new update was ready for download yesterday afternoon.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT1430 what do you do after you have reset your iphone & the plug to itunes icon shows ?

what do you do after you have reset your iphone & the plug to itunes icon shows ?

You connect it to iTunes with the dock cable and restore it.

What do you do if the trial is expired after just being downloaded?

What do you do if the trial is expired after just being downloaded?

You can't do anything about it:
Adobe trial software expired early
Mylenium

To trigger the same Gp process once again after the completion of one

Hi
I have aGP process implemented in Webdynpro.
After the completion of this process, itshould automatically trigger the same GP process once again.
It should happen from the webdynpro coding.
Can anybody help me.
thnaks
Smitha

Hi Siva,
Thanks for the reply.
But How can I give process name ?
There can be more than 1 process with the same name.
Procees ID is the unique one what we can use.
Still that too we can't use as method.
we can give it as a parameter.
what I tried is,
IWDClientUser wdUser = WDClientUser.getCurrentUser();
IUser user1 = wdUser.getSAPUser();
IGPUserContext userContext = GPContextFactory.getContextManager().createUserContext(user1);
IGPProcess process = GPProcessFactory.getDesigntimeManager().getActiveTemplate("EB0B28E08B6011DBB1BE00145EB416E0",userContext);
EB0B28E08B6011DBB1BE00145EB416E0 is the process ID.
This code I have tried by giving before and after the completion of the previous process(process9executionContext.processingComplete();)
And I tried URL navigation also, by creating an outbound plug in the interfaceview. in the outbound plug I have called the process instantiation URL. But it is giving the error: "can not navigte :non-existent outbound plug"
Please help me out.
Thanks
smitha

SM36 job --- next job should start after the completion of before job

Hi All,
I have a job which is running hourly . My requirement next job should start after the completion of before job .
forexample :
It will run evenry hour like ,--- 8 am,9 am,10 ,11 etc..
My requirement
9am job should start after completion of 8 am job ... Can you please let me know ... How can i achieve this thru SM36.
Thanks,
Tashvi

Hi Tashvi,
Start Criteria :
From the initial define background job screen, click on the u2018Start dateu2019 pushbutton to indicate the start criteria for the background job. The options available for scheduling jobs are:
Immediate - allows you to start a job immediately.
Date/Time - allows you to start a job at a specific date/time.
After Job - allows you to start a job provided that another job has completed.
After Event - allows you to specify the event when you want your job to run.
At Operation Mode - allows you to start a job when the system switches to a particular operation mode.
Scheduling Job after another Job :
The u2018After Jobu2019 pushbutton allows you to start a job provided that another job has been completed. With this option, you must specify the name of the job that must be completed for the current job to run. If the u201CStart status-dependentu201D option is checked, the current job will only run if the specified job ends successfully. This option is useful in cases where the current job depends on the outcome of the specified job.
Hope this Helps.
Regards,
Chandravadan

Imessage and Facetime wont accept my apple id, but i can access my app store using my id. What do you think is the problem? Am i the only one who experience this issue?

Imessage and Facetime is not accepting my apple id, but I can access my app store and itunes. What do you think is the problem? I called apple tech support but they cant even explain why... I need your help!! Please?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

What do you do when the system crashes ?

hi experts,
i want answers for the following questions..
1.What do you do when the system crashes in the middle of a BDC batch
session?
2.What do you do with errors in BDC batch sessions? and how to proceed further..
with regards ,
James...
valuable answers will be rewarded...

HI,
There are two ways to tackle this issue.
<b>Method..1</b>
Thru se16 check the table(s) being updated, preferably the last table as per your code. If you have say 1600 records in the flat file check for the upload of the 1600 th record.. If not ok, check for the upload of the 800 th record(N-N/2), if OK go & check
N+(N/2) th record if not ok goto N-(N/2) th record where N is the curent record number in the flat file . In about 4 or five checks you will converge on the last uploaded record.
Now from the flat file, remove the lines till the upload is ok & then re-run BDC.
Even here a record may be uploaded partially which has to be manually edited thru se16.
<b>Method..2</b>
Have a zee table for uploads. Just after uploading a record into the sap table, fill this zeetable with few fields of each the records. In an abort situation this table will tell the story of the update status. Take care to empty this table occasionally.
Regards
Gaurav

EP developer work after the completion ep installtion with the basis person

Hi,
After the completion of basis person work in EP, what r all the responsibilities of the ep developer.
please tell the procedure how they will do the work.
If u ve any documents with screen shots please forward to me.
Thank u.
Regards,
Kakshayini.

Hi,
Refer this thread...
EP materials
Best Practices in EP
Regards,
Senthil K.

What do you think is the best APPS?

So after downloading a few apps I would like to know what do you think is the best Free apps and best paying apps you have.
MY BEST FREE APPS
1.) Facebook
2.) Myspace
3.) Bank of America
4.) Ebay
5.) TMZ
MY BEST PAYING APPS
1.) Touch Grind
2.) Deal or no deal
3.) Price is right

Depending on the specs of your computer, time taken to convert DVD's to an iPod-playable format can vary. On my computer (see below), it takes about 10 hours to convert a 2-hour DVD to the iPod format, using Videora.
So, due to the extremely large size of the DVD rip, it'll take a while to convert it, regardless of how fast or slow your system is.

Triggering a report after the completion of processing the session

Hi Friends,
I want to know how to trigger an report after the completion of processing the session.
Thanks,
Raj

Hi
        SELECTION-SCREEN                               *
PARAMETERS: p_name     LIKE apqi-groupid,
            p_datum    LIKE apqi-credate,
            p_time     LIKE apqi-cretime,
            p_event    LIKE tbtco-eventid.
             DATA                                     *
DATA: fl_job_ok TYPE c,
      fl_event TYPE c,
      cont_sysubrc_6 TYPE i.
DATA: start_time LIKE sy-uzeit,
      start_date LIKE sy-datum,
      time       LIKE sy-uzeit,
      delta_time TYPE i.
DATA: apqitab LIKE STANDARD TABLE OF apqi WITH HEADER LINE.
DATA:
btc_running       LIKE tbtco-status VALUE 'R',
btc_ready         LIKE tbtco-status VALUE 'Y',
btc_scheduled     LIKE tbtco-status VALUE 'P',
btc_released      LIKE tbtco-status VALUE 'S',
btc_aborted       LIKE tbtco-status VALUE 'A',
btc_finished      LIKE tbtco-status VALUE 'F',
btc_put_active    LIKE tbtco-status VALUE 'Z',
btc_unknown_state LIKE tbtco-status VALUE 'X'.
                     START-OF-SELECTION                              *
START-OF-SELECTION.
DATA: a VALUE '1', b.
Controllo esistenza job:
start_time = sy-uzeit.
start_date = sy-datum.
DO.
    apqitab-creator = sy-uname.
    CALL FUNCTION 'BDC_OBJECT_SELECT'
      EXPORTING
        name                   = p_name
        datatype               = 'BDC'
    CLIENT                 = SY-MANDT
        date_from              = p_datum
    DATE_TO                =
        time_from              = p_time
    TIME_TO                =
       QSTATE                 = 'F'
        session_creator        = apqitab-creator
      TABLES
        apqitab                = apqitab
      EXCEPTIONS
        invalid_datatype       = 1
        OTHERS                 = 2.
    IF sy-subrc <> 0.
      fl_job_ok = space.
    ELSE.
      LOOP AT apqitab.
        CASE apqitab-qstate.
          WHEN 'F'.          fl_job_ok = 'X'. EXIT.
          WHEN 'E'.          fl_job_ok = 'E'. EXIT.
          WHEN OTHERS.       fl_job_ok = space.
        ENDCASE.
      ENDLOOP.
      IF fl_job_ok = 'X' OR fl_job_ok = 'E'.
        EXIT.
      ENDIF.
    ENDIF.
    IF start_date <> sy-datum.
      start_time = sy-uzeit.
    ENDIF.
    time = sy-uzeit.
    delta_time = time - start_time.
    IF delta_time > 1800.
      EXIT.
    ENDIF.
    REFRESH apqitab.
ENDDO.
IF fl_job_ok = 'X'. " Trovato JOB
    fl_event = 'X'.
    IF fl_event = 'X'.
Attiva evento
      CALL FUNCTION 'BP_EVENT_RAISE'
        EXPORTING
          eventid                = p_event
        EXCEPTIONS
          bad_eventid            = 1
          eventid_does_not_exist = 2
          eventid_missing        = 3
          raise_failed           = 4
          OTHERS                 = 5.
      IF sy-subrc <> 0.
        MESSAGE e999(zfagm) WITH p_event 'is not actived'(002).
      ELSE.
        MESSAGE i999(zfagm) WITH p_event 'is successfully actived'(002).
      ENDIF.
    ELSE.
      MESSAGE e999(zfagm) WITH p_event 'is not actived'(002).
    ENDIF.
ELSE.
    IF fl_job_ok = space.
      MESSAGE e999(zfagm) WITH p_event 'is successfully actived'(002).
    ELSE.
      MESSAGE e999(zfagm) WITH p_event 'is successfully actived'(002).
    ENDIF.
ENDIF.
Max

I´ve bought the new IPad3, what a disappointment the 3G does not work, no Internet available, APPLE what are you doing for the all the people in Germany who bought the new IPad3? I´m still an Apple fan, all my products are from Apple but I need a solution

I have been waiting since months for the new IPad4G 64 Gbt. ON recommendation of Apple Support I have changed my IPad 4G last week in the hope that something was wrong with the firts one I bought.
The one I have now has the same problems. WiFi is working however 4G not at all. Apple what can I do? What are you doing for the thausands of German Apple fans who have bought a IPad4G and can not use it. We need a solution NOW. I´m working with this tool and need to be able to rely on it.
Thanks for a feed back.

JKerki wrote:
They had not heard about the problem, however made no problem to change it for an other one. Apple Support Germany pretendet not to know about this problem. However the web is full of complaints.
It would be advisable for Apple to react officially on it. € 799, - for something that doesn´t function is no fun :-((
Isn't replacing your iPad Apple "officially" acting on it?

TS1372 I was just about to about to update my iPod nano 7 from 1.0.2 to 1.0.3 . And after the complete download of the software,it says "The firmware file could not be found" A little help anyone!!!

I was just about to about to update my iPod nano 7 from 1.0.2 to 1.0.3 . And after the complete download of the software,it says "The firmware file could not be found" A little help anyone!!!

Welcome to Apple Discussions!
Take a look at these two articles. The error messages are not the same, but they may help...
http://docs.info.apple.com/article.html?artnum=304309
http://docs.info.apple.com/article.html?artnum=301267
If not, post back.
btabz

How to Extend an AM and in what case you will extend the AM

Hi OAF Gurus,
Please explain How to Extend an AM and in what case you will extend the AM.
Thanks in advance
Kumar

Hi,
please go throughwith below link provied by anil...
http://oracleanil.blogspot.com/2010/11/am-extension-in-oaf.html
Regrads
Meher Irk

What does "you cannot open the application because it is not supported on this architecture" mean?

What does "you cannot open the application because it is not supported on this architecture" mean?

well my mac lion (10.4.11) will run minecraft.jar, but runs very slow , i tried downloading minecraft.zip it showed the mc logo with a x on it, i tried opening it, and it said it cant open it because there is no application to open it, do i need a higher version of mac? mainly leopard or snow leopard? This is what it looks like

What do you do after the complete wipeout?

Similar Messages

Maybe you are looking for