What do you do for an error during updates?
error occurs while attempting to read c:\windows\installer\itunes64.msi
same error occurs while attempting uninstall
I wonder if a couple of you would be kind enough to help me out?I have the research packet that I have to complete and they want me to interview a few professionals who would be responsible for hiring IT guys. The interview is only 4 questions and some basic info about you (Already public info, nothing personal).If you are willing to help me out, and I appreciate it, you could just respond to this thread or even message me if you don't want your stuff out in the public domain. So here it is:(Your Info)The company name that you work for / own:Your Name:Your Title:(The four questions)#1 - What type of training or education is needed to be considered for the position (Entry level - IT Admin, IS Manager, IT Tech, etc.)?#2 - What are the most important qualifications for these positions?#3 - What are some of the duties and responsibilities...
This topic first appeared in the Spiceworks Community
Similar Messages
-
TS2180 Need a resolution for multiplexor error during burns?
Need a solution for Multiplexor Errors during iDVD disc burning process?
Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W -
ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR
hi... experts....
Iam having one screen in my previous module pool program....and now as per my requirement i added on e new field...
for that...
1. i declared one variable in top include...
2. cretaed one more new block with help of box in layout screen..
3. added some text field and inputput out field...
4. and in that block i also added one line with test like... following...
" NOTE: PLEASE ENTER THE ..... VALUE..." Like this.... just for to give direction...
so these are the steps i taken to add new field to my screen... but here i am geting error ... while entering the value in that field and press any push button.... including back in that screen... like....
"INVAILD FIELD FORMAT (SCREEN ERROR)"
.... ANY BODY TELL ME WHAT IS THE REASON FOR THIS ERROR... COMMONLY???
THANK YOU,,,
NAVEEN..hi naveen,
there can be problem from ur layout side.
Goto SE51. in Layout editor make sure that the type in screen and in TOP Include is same.
and if you are using currency field than it can also give error to you.
if still you any error .
give me type of variable whcih you defined in TOP and also code.
give reward if helpfull. -
Help! Can any tell me what cause / remedy is for this error
Can any tell me what cause / remedy is for this error:
[1/29/08 10:52:05:009 GMT] 4131a8 SystemOut
U 2008-01-29 10:52:05,009 [QuartzWorkerThread-0] FATAL
com.scheduler.service.businessservice.ReportExecution
() 190470534 - ****** METHOD FAILED ******WebIntelligence SDK / JSP
Exception --- Number :10480 --- javaError : WI Internal Error = 100
--- Description : WI Error while trying to get HTML view for the
documentAfraid I haven't seen that before. The only thing I could suggest is to boot from the 1st Install disk and run the hardware test. I would wonder about the video card. You might also post in the MacPro forum. I just got MY MacPro today, and the MacPro Forum is where I would go:
http://discussions.apple.com/category.jspa?categoryID=194
The only other thing I can think of is to launch Console from the Utilities folder and see if any errors are being reported.
Francine
Francine
Schwieder -
What do I do for a ERROR CHECK ACTIVATION message on adobe digital edition??
What do I do for a ERROR CHECK AXCTIVATION message on adobe digital edition?????
For this problem, you need to deauthorize and authorize ADE again.
Launch ADE
Help -> Erase authorization.
ADE will be deauhorized.
Now again AUTHORIZE ADE
Help-> authorize computer.
Error will be fixed !! -
Incorrect XML disply for ALERTCATEGORY error during deserialization data lo
Hi,
I am getting below error while executing first scenario in Quality enviornment, i have not defined and trasported any ALERTS.
Incorrect XML disply for ALERTCATEGORY error during deserialization data loss occured when converting 011136c23c9430359b57c0ef8949c630
this error stoping my interface executing...did anyone experienced this issue??
put some light on this.
many thanks,
RajHave you checked this SAP Note # 1394710 ?
-
I have been waiting since months for the new IPad4G 64 Gbt. ON recommendation of Apple Support I have changed my IPad 4G last week in the hope that something was wrong with the firts one I bought.
The one I have now has the same problems. WiFi is working however 4G not at all. Apple what can I do? What are you doing for the thausands of German Apple fans who have bought a IPad4G and can not use it. We need a solution NOW. I´m working with this tool and need to be able to rely on it.
Thanks for a feed back.JKerki wrote:
They had not heard about the problem, however made no problem to change it for an other one. Apple Support Germany pretendet not to know about this problem. However the web is full of complaints.
It would be advisable for Apple to react officially on it. € 799, - for something that doesn´t function is no fun :-((
Isn't replacing your iPad Apple "officially" acting on it? -
Still on PS3? What are you waiting for?
Are you still playing PlayStation 3? Why haven't you moved to the new generation with PlayStation 4? What are you waiting for? A specific game? The right price? Morpheus?
i'm broke at the moment, but in all fairness, I've got plenty of stuff to keep me busy as it is on my PS3 (as well as my WiiU, Amiga, Spectrum, 3DS, PC and Atarti2600) so I have no real need to upgrade. Furthermore, I'm not sure where to go next gen yet. It's tooe arly days to make a sensible decisison. Morpheus is callling to me, but currently I am much more impressed with the XboxOne with all its functionality, external HDD support and codecs, than the rather barren and user-unfriendly (for me anyway) PS4. I am also very angry and unforgiving with Sony for all the content removal on both my PS3 and SmartTV (which has lost Facebook, Midnight Pulp, Sony Entertainment TV, Crackle, Viewster and a whole host of other apps they decided they didn't want to run anymore.) As well as loads of things on the TV that just dont work properly that they cant be bothered to fix, incluing something that casues Youtube to crash all the time. The loss of PSHome was the final straw for me with Sony. Contrary to what a lot of people like to think it was very busy, and for me it was quite important, due to health issues I am fairly housebound, and it was a very good way for me to socialize.I just don't trust Sony anymore to make something that won't be downgraded in the near future. If Morpheus is great then I might be tempted to PS4 in time, but with rumors starting to emerge that the XboXone might support the Oculus, Sony have even lost the VR edge. Just wait and see for now.
-
I Can't able to download IOS 7. I n my software update it is giving an error " Unable to check for updates. An error occured while checking for software update". What can be done for this error?
Me too having the same thing what's the solution for this how can I update
-
I just purchased MBP and it is my first Apple computer. How concerned should I be about virus software and what do you recommend for security software?
1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets (see below.)
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
3. Starting with OS X 10.7.5, there has been another layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't actually been tested by Apple (unless it comes from the Mac App Store), but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe.
Gatekeeper has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could find some other way to evade Apple's controls.
For more information about Gatekeeper, see this Apple Support article.
4. Beyond XProtect and Gatekeeper, there’s no benefit, in most cases, from any other automated protection against malware. The first and best line of defense is always your own intelligence. All known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you never use software that comes from an untrustworthy source. How do you know whether a source is trustworthy?
Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
5. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was never a good idea, and Java's developers have had a lot of trouble implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style "virus" affecting OS X. Merely loading a page with malicious Java content could be harmful. Fortunately, Java on the Web is mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers. In Safari, this is done by unchecking the box marked Enable Java in the Security tab of the preferences dialog.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a specific task, enable Java only when needed for the task and disable it immediately when done. Close all other browser windows and tabs, and don't visit any other sites while Java is active. Never enable Java on a public web page that carries third-party advertising. Use it only on well-known, password-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Follow these guidelines, and you’ll be practically as safe from malware as you can be.
6. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
7. ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
ClamXav is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
ClamXav may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use ClamXav unless a network administrator requires you to run an anti-virus application.
8. The greatest harm done by anti-virus software, in my opinion, is in its effect on human behavior. It does little or nothing to protect people from emerging threats, but they get a false sense of security from it, and then they may behave in ways that expose them to higher risk. Nothing can lessen the need for safe computing practices.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default. -
What do you do for malware protection?
What do you do for malware protection?
Use an iPad (ok you're already doing that). Apple vets all apps through the App Store. If it's available in the App Store it is safe.
In general:
Do not click on any links sent in an email. These often direct you to fraudulent websites.
Know what it is you're installing. If you didn't ask for it you probably don't want it.
Use your head. Get savvy about phishing attempts. These are getting better every day and represent the single greatest threat you will encounter. It doesn't matter what kind of computer you use, phishing is the 21st century version of a con game that has been around since the paleolithic era.
The OP's question is for iPads but just in case, if you are using a Mac:
Do not install any anti-virus software. Period. -
What application does an iMac come with that lets you see the core of its system, and what would you look for to determine if malware was on it?
This extension?
*FireBug: https://addons.mozilla.org/firefox/addon/firebug/
Firefox 4 also has a build in inspector: Firefox > Web Developer > Inspect -
Customer Coversion Using Interface Table - Error during update
I need to import customers from legacy applicatiion and is planning to use standard customer interface for that. For testing, I am able to create customers with hardcoded values. But while I try to update the same customer record (again using hard coded values), it gives me error and is not generating the error report as well. I am getting the following error during update:
racudc: ORA-20212: Enter valid Billing Fields.
ORA-06512: at "APPS.ADVOAR_CUST
racudc: Error updating customers.
or
racudc: updated 1 partiesracudc: Partyrel 1 parties
racudc: ORA-20210: You have edited one of the following fields, Extended Billi
racudc: Error updating customers.
Also it seems we can not update an address, site_use_code, or PRIMARY_SITE_USE_FLAG using customer interface.
The following is the test record I inserted for updating the customer I created and ran the customer interface:
insert into ra_customers_interface
(ORIG_SYSTEM_CUSTOMER_REF
,INSERT_UPDATE_FLAG
,CUSTOMER_NAME
,CUSTOMER_STATUS
,LAST_UPDATED_BY
,LAST_UPDATE_DATE
,CREATED_BY
,CREATION_DATE
,ORIG_SYSTEM_ADDRESS_REF
,ADDRESS1
,CITY
,COUNTY
,STATE
,POSTAL_CODE
,COUNTRY
,customer_attribute13
values
('APP1-492503' --ORIG_SYSTEM_CUSTOMER_REF
,'U' --INSERT_UPDATE_FLAG
,'Pizza Hut - CDH TEST4' --CUSTOMER_NAME
,'A' --CUSTOMER_STATUS
,-1 --LAST_UPDATED_BY
,sysdate --LAST_UPDATE_DATE
,-1 --CREATED_BY
,sysdate --CREATION_DATE
--,'Y' --PRIMARY_SITE_USE_FLAG
--,'BILL_TO' --SITE_USE_CODE
,'APP1-492503-ADDR1' --ORIG_SYSTEM_ADDRESS_REF
,'1 River Road, Bldg 1' --ADDRESS1
,'SCHENECTADY' --CITY
,'SCHENECTADY' --COUNTY
,'NY' --STATE
,12305 --POSTAL_CODE
,'US' --COUNTRY
,'55'
I am testing this in 11.5.10 env. Any help on this is appreciated.
Thanks,
MKConvert only the data you need. And the data you need is probably less than you think. For example, other than open invoices (invoices for which money is still owed), you probably don’t need to convert ANY old invoices. You may want to convert data on what was purchased (e.g., event registration, membership, product, etc.) but the actual details (e.g., payment type, payment date) are probably no longer significant.
http://www.e-datapro.net/data_conversion.htm -
Communication channel: error during update
Hi,gurus:
We are doring a soap2rfc scenario.
After reactivating relavant object in ID,I found that the status of sender communication channel was "error during update" in RWB.Have you ever dealed with the problem?Any help will be appreciated!hii
ask your basis guys to see the startup log of XI server...see if there is any error in it.. if there is any error in it, then restart your XI server.......go to SMICM....see if the ICM monitor is running fine.......If ICM is not running fine, then go to Administration->j2ee server->restart->yes and restart your j2ee engine of your XI server......
VisualAdmin-Server-services- Tracelogs. Also can restart your adapter engine and can you exact error you can getin RWB.
Regards -
ME 808: System error: error during update Table EKAB
Hi,
Couple of years ago, during carve out, one of the contracts was deleted.
A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered quantity is lesser than PO quantity), or by checking the delivery complete box. But they are not able to do so, as there was no contract number exists in the system table.
I propose to create a contract with the same number mentioned in the PO and then to change the quantity in the purchase req and PO. However now the system issues a dump error message "ME 808: System error: error during update Table EKAB".
Can anyone help how to resolve the issue?
Any body had similar situation?
Thanks for your help.
Regards,
ShivaHi,
I am not sure how the external consultants deleted this contract during carve out.
Our division was bought out from another company and moved the data to our SAP system.
I checked the OSS and found note 922427 could resolve the issue.
Thanks for your response.
Regards
Maybe you are looking for
-
Hi there, Rosetta works up until Snow Leopard. The Classic Environment works up until a late version of Tiger. Rosetta makes apps. built for PowerPC Macs work. The Classic Environment make apps. for Mac OS 9 work on Mac OS X for PowerPC Macs. Would i
-
How do you copy photos from one iMac's iPhoto library to another iMac's iPhoto library??
I have 20K+ photos on my original iMac and enjoy the desktop shuffle of pictures. I have a newer iMac that has its own library of pictures but I would really like to take all of the pictures from the original iMac and put them on the newer one. I h
-
ok, i have a problem that needs resolving and any help would be appreciated i am trying to put together a video that consists of about 40 images (tifs) that are each 3600 pixels X 3600 pixels.the vido also contains a voice over. the images were given
-
When to rebuild? and what is the rebuild later option?
Hi, Something happened yesterday that is causing aperture to crash repeatedly. I think the problem may be with one project where I tried to edit a few raw files and also tried to do a round trip in photoshop with another file. The first symptoms were
-
Why i cant downloand ios6 in my iphone 4s
why i cant downloand ios6 in my iphone 4s