What do you do when there are massive data per row?

I am just looking for ideas. I have about 90 characters too long for the CR report line. The ones going over are 3 address columns. Looking for ideas how to design the report.

hi Paul,
what do you want it to look like?
if you it to stop before 90, then right click on the field and go to Format Field > Common tab > Display String and use a formula like
currentfieldvalue[1 to N]
where N is the length that you want the field to stop at.
you can also use the Tooltip dialogue with
currentfieldvalue
should you wish to have the end user be able to see the entire field with a mouse over.
-jamie

Similar Messages

What do you do when there isn't an "Add a buddy" button?

My iChat doesn't have an add a buddy button, and under the "Buddies" Tab the "add a buddy" option isn't a link.

Hi,
When you start iChat for the first time you get a set of Start Up Screens.
You can Add an AIM valid Name at first then Enable Bonjour then Add a Jabber ID at later Screens.
It is possible to click through those Start Up screen and not Enter an AIM Valid Name or a Jabber one and have Bonjour only Enabled.
This means that in iChat > Preferences > Accounts you will only see the Bonjour account (It is in fact always there even if not enabled) but the Account info tab on the right will have "Use this Account" ticked in the check box.
Bonjour is the method your Mac connects to other Macs on your LAN.
Those that have iChat ON will show up in your Bonjour Buddy List (It uses their Address Book My Card info - they see your Address Book My Card "Real Name")
If there are no other Macs on your LAN (with iChat Active with the Bonjour Bit Enabled) then you will see no Buddies in the List.
As Defcom implies it has no Add Buddy + button.
Does this sound like where you are up to right now ?
8:40 PM Sunday; May 15, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Excel and OpenOfficeSpreadSheet is Crashing when There are 1,50,000 Rows

I want to know the behaviour of Excel and OpenOfficeCalc when the Report having more than 1,50,000 row. Whether it will split into two sheets? or Is it possible to get it a single sheet.
Kindly Reply as soon as possible.
Awaiting for the positive response

It is not possible to have in a single sheet due to the limitation of maximum rows on a single XLSX sheet at 1,048,576.
This is a limitation of the Microsoft XLSX Excel format.
However, there are ways using the Spudsoft emitter for XLSX to set page breaks for a specific number of rows.

What do you do when BT are ignoring you?

Hi. I don't know what else I can do to get an explanation/apology from BT. I phoned the 150 number because I was unable to call out on my phone and was later told no-one could call in either. Assuming a fault I used mobile to call it in. One hour 30 mins later I was passed over to the first person I spoke too! The second day wasn't much better and I e-mailed the customer complaints. I am still waiting to hear from them. Eventually someone with some inteligence understood what I was saying - initially I had tried to get my lodger's name removed as bill holder (he has left country) and have my name on instead leaving everything else exactly the same. This was a 2 part action the account would be 'closed' and I would 'open' it again on same day 28.6.11. No. apparently I was told by someone they couldn't open account for me and order was cancelled. I was told to ring back in 7 days and go through the procedure again. On the 2nd the phoneline was 'closed' but of course, I didn't take it over. This was the problem which was caused by BT taking action on an aborted order! I want someone to acknowledge their administrative action caused and is causing problems. I now have set up a new account but of course have now got a new number one of the things I wanted to avoid happening as I am actually disabled and need my telephone to keep in touch with my supporters/hospital/etc. I now need to contact them all and advise of new number and I have to wait until the 6th to have the line connected again!! Surely BT have enough experience to pull these things together? Instead of trying to sell us broadband/Tv and the like it would be good to concentrate on getting the basics right I would think. Anyone got an idea on who to contact or how to get someone aty BT to acknowledge that we the customer keep these people in employment.

Hi notmyproblemmate
I'll be happy to help you out with this and get your line back on asap. I cant guarantee your old number but will try and get this back for you too.
Could you drop me in an email please with your BT account and telephone number along with a link back to this thread.
Just send using the contact us form in my profile under the 'about me' section.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

What do you do when there is an activation error

when i start up my Iphone 4 and try to activate it , is say activation error and i also connected it Itunes and it also says that . What do i do ???

Find My iPhone Activation Lock

Month view Calender shows dots when there are no data

In the month view calender, you should only see dots where you actually have an appointment. I have dots where I have no appointments. I tried a reset and a total delete of data. When I go back to synchronising with Itunes, the dots came back. How can I solve that problem?
Thanks and regards
Fadel

Hi,
The Work Status related entries will be available in the table dbo.tblFINANCELock. Check in this table.
Hope it helps.

What does it mean when there pink vertical lines on the start up screen?

What does it mean when there are pink vertical lines on the start up screen on an IMac ?

It means you have a hardware problem. That could be the screen itself or the graphics system, GPU.

What does the message "Commit can be issued only when there are no requests awaiting responses" mean ?

Can someone explain what this message is, and what the reason could be for
          the java.lang.IllegalStateException.
          When such an error is encountered, how can I find out what the
          "RepliesOwedMe" are. The complete exception is as follows
          Any quick hint is greately appriciated
          Thanks
          asankha
          <Sep 6, 2001 12:49:18 PM GMT+06:00> <Error> <EJB> <Exception during commit
          of transaction transactio
          n=(IdHash=8297169,Name = [EJB
          CActionBeanImpl.execute()],Xid=3:c56b8ee8f6114598,Status=Active,numRep
          liesOwedMe=2,numRepliesOwedOthers=0,seconds since begin=0,seconds
          left=29,ServerResourceInfo[weblogi
          c.jdbc.jts.Connection]=(state=suspended,assigned=none),SCInfo[myserver]=(sta
          te=active),properties=({
          weblogic.transaction.name=[EJB CActionBeanImpl.execute()],
          weblogic.jdbc=t3://10.2.1.133:7001, weblo
          gic.debug.DebugContext=weblogic.utils.DebugContext@662250})):
          java.lang.IllegalStateException: Commi
          t can be issued only when there are no requests awaiting responses.
          Currently there are 2 such reque
          sts. xid = 3:c56b8ee8f6114598, status = Active
          at
          weblogic.transaction.internal.TransactionImpl.throwIllegalStateException(Tra
          nsactionImpl.
          java:1272)
          at
          weblogic.transaction.internal.TransactionImpl.checkIfCommitPossible(Transact
          ionImpl.java:
          1206)
          at
          weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransaction
          Impl.java:162
          at
          weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:201)
          at
          com.edocs.wb.web.action.CActionBeanEOImpl.execute(CActionBeanEOImpl.java:37)
          at CeaMarketMainServlet.doGet(CeaMarketMainServlet.java:185)
          at CeaMarketMainServlet.doPost(CeaMarketMainServlet.java:312)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
          at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          at
          weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
          :213)
          at
          weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
          ntext.java:12
          65)
          at
          weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
          :1631)
          at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
          at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          >


          This means that the transaction initiator has not received replies for some of
          the transactional requests when the transaction commits, i.e. the checked transaction
          behavior is violated. WLS TM enforces checked transaction behavior to make sure
          that all work done in the transaction context will be completed before transaction
          is committed. If it cannot make such guarantee due to outstanding replies, it
          aborts the commit right away.
          Currently, there is no provisions for dumping the requests whose replies are still
          pending.
          I would suggest you report to BEA support: [email protected]
          Regards,
          Priscilla
          "Asankha C. Perera" <[email protected]> wrote:
          >Can someone explain what this message is, and what the reason could be
          >for
          >the java.lang.IllegalStateException.
          >
          >When such an error is encountered, how can I find out what the
          >"RepliesOwedMe" are. The complete exception is as follows
          >
          >Any quick hint is greately appriciated
          >Thanks
          >asankha
          >
          ><Sep 6, 2001 12:49:18 PM GMT+06:00> <Error> <EJB> <Exception during commit
          >of transaction transactio
          >n=(IdHash=8297169,Name = [EJB
          >CActionBeanImpl.execute()],Xid=3:c56b8ee8f6114598,Status=Active,numRep
          >liesOwedMe=2,numRepliesOwedOthers=0,seconds since begin=0,seconds
          >left=29,ServerResourceInfo[weblogi
          >c.jdbc.jts.Connection]=(state=suspended,assigned=none),SCInfo[myserver]=(sta
          >te=active),properties=({
          >weblogic.transaction.name=[EJB CActionBeanImpl.execute()],
          >weblogic.jdbc=t3://10.2.1.133:7001, weblo
          >gic.debug.DebugContext=weblogic.utils.DebugContext@662250})):
          >java.lang.IllegalStateException: Commi
          >t can be issued only when there are no requests awaiting responses.
          >Currently there are 2 such reque
          >sts. xid = 3:c56b8ee8f6114598, status = Active
          > at
          >weblogic.transaction.internal.TransactionImpl.throwIllegalStateException(Tra
          >nsactionImpl.
          >java:1272)
          > at
          >weblogic.transaction.internal.TransactionImpl.checkIfCommitPossible(Transact
          >ionImpl.java:
          >1206)
          > at
          >weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransaction
          >Impl.java:162
          >)
          > at
          >weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:201)
          > at
          >com.edocs.wb.web.action.CActionBeanEOImpl.execute(CActionBeanEOImpl.java:37)
          > at CeaMarketMainServlet.doGet(CeaMarketMainServlet.java:185)
          > at CeaMarketMainServlet.doPost(CeaMarketMainServlet.java:312)
          > at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
          > at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          > at
          >weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
          >:213)
          > at
          >weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
          >ntext.java:12
          >65)
          > at
          >weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
          >:1631)
          > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
          > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
          >>
          >
          >

HT201412 what do you do when your phone numbers no longer have the contact persons name just a number. Also names are missing from the address book where contacts are.

what do you do when your phone numbers no longer have the contact persons name just a number. Also names are missing from the address book where contacts are.

I, too, love everything about my phone. The other day I tried to crash my Z10 by running multiple apps and having videos running in the background. Do you think my Z10 showed any signs of slowing down? Nothing doing! It ran as smooth as silk. I'm very impressed.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.

What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Can you fix my screen when there are big black blobs on it

Can you fix my screen when there are big black blobs on it

You can get the screen replaced on a White or Black MacBook for $139 by mail. http://www.ebay.com/itm/13-APPLE-MacBook-LCD-Screen-Repair-Replacement-Service-/ 270597769033?pt=LH_DefaultDomain_0&hash=item3f00e24749

I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

Hi...
Mac OS X keyboard shortcuts
Control-F4
Move focus to the active (or next) window
Shift-Control-F4
Move focus to the previously active window
By the way... since you are new to Mac, click a clear space on your Desktop. You should see "Finder" top left corner of the screen in the menu bar.
Click Help then click Help Center
As an example type in keyboard shortcuts
You can use the Help menu for almost any application on your Mac.
Apple - Find Out How - Mac Basics
For held switching from PC to Mac > Apple - Support - Switch 101

Problem with XML Publisher report when there are no detail records.

I am working on an Oracle XML Publisher procurement report (Oracle E-Business Suite R12) that starts with a budget amount that is imported from our financial system, then lists all requisitions and orders that are in process (not approved). The amounts of all those unapproved requisitions/orders are totaled using a Sum form field, to be followed by a field where the unapproved requisition/order total is subtracted from the budget amount (amount available). I am running into a problem when there are no unapproved requisitions. When I run the report for such instances, it completes with a warning -- here is what it states in the OPP log:
oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'sum'
I have altered my sum field on the RTF template to include an if statement in case of a null value...
<?sum (EXTENDED_COST)?> <?xdofx:if sum (EXTENDED_COST) = " then 0 end if?>
...but this does not work.

Hi,
You are on right track. Simply put summary field in header group and remember to set reset at property to Header Group Not Child and now you can use this field in format trigger.
Format trigger must be written on header frame.
Cheers !
Adinath Kamode

Red artifact blob shows up in the middle of my screen when there are dark colours showing

Does anyone know what this is? Or why it is happening? There is a red blob-ish artifact that is on the middle of my screen and you can notice it when there are dark colours on the screen. It's really annoying when I'm trying to watch movies or play games that have dark scenes. (The picture quality isn't that great, but you can kinda see the red blob I'm talking about.)
Any thoughts?

I'm having the same problem. Only noticed it after installing OS X Lion.

What do you do when there are massive data per row?

Similar Messages

Maybe you are looking for