What do you do when you get "the software for ipad was corrupted during download" on ur screen
please if anyone can help i would be greatful
If you want to try recovery mode which is what Apple recommends if you are unable to update or restore your iPad, go here.
http://support.apple.com/kb/ht4097
If you want to manually download the update go here.
http://osxdaily.com/2013/01/28/ios-6-1-released-download/
Similar Messages
-
I can't update my iPad. The message says, the software for the iPad was corrupted during download. Err=1403
What did iTunes Support say when you contacted them ? If it's been more than 48 hours since you contacted them and you haven't had a reply then contact them again.
If you haven't yet contacted them, then to do so :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page
- then Purchases, Billing & Redemption -
What do I do when I get the message my printer is not connected when I want to print wirelessly.? HP Officejet Pro 8500A e-All-in-One. I have a macintosh computer using snow leopard. I have used the printer for 6 months. Nothing has changed. I shut off the printer and turned it on. The internet is working altough I will turn it off and on. What do I do next? Thank you.
The easiest and fastest thing for you is to reset the printer to its defaults and then just install the printer again following the instructions in the manual when you received it. If you don't have these you will find this on the HP web site.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
What does it mean when I get the error of iTunes Library .itl file is locked
What does it mean when I get the error iTunes Library .itl file is locked
It means that your iPod Hardisk has crashed and cant be started, you need to have the Hardisk replaced at Apple Store or any 3rd Party iPod service, if it is out of warranty.
-
What do I do when I get the message "Your Apple ID has been disabled" when trying to purchase songs? How do I enable it again so that I can purchase songs again?
Enter "Apple ID disabled" in the search box at the top of this page.
http://support.apple.com/kb/TS2446 -
What does it mean when I get the error message, "unable to contact iMessage server" when I try to use iMessage and after it starts verifying?
iOS: Troubleshooting FaceTime and iMessage activation
Apple is not reporting any problem
http://www.apple.com/support/systemstatus/ -
I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website Mac OS X V10.6.7 upgrade combined but it still won't do it? Any other suggestions. The printer is not working either - I am not sure if they are connected. Everything else is fine.
Please excuse, but I have to ask an obvious question: Did you already update using the Snow Leopard Retail install DVD? (You must do this first; 10.6.7 is just an update if you already have 10.6.) Are you, then, trying to update from whatever version was on the install DVD to 10.6.7?
Otherwise, I'd keep trying. The 10.6.7 Combo is a huge update. -
I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once -
Screen turns into blue when i upgrade the software for iphone 5s
screen turns into blue when i upgrade the software for iphone 5s
There's way too much blue in that green screen
This is green
Try pulling down the spill level and reducing the spill tint. You're probably going to have to tweak the color selection manually. -
I downloaded Mac OS X and I am having problems installing it: I get messages saying that it is was corrupted during downloading. I have tried re-downloading (which Appstore tells me is free) but everytime I get the same message. Help
Are you using dial-up, cable, or DSL? Do you have a slow or fast connection? The former is likely to make it difficult to get a reliable download of a 4 GB file.
-
iPhone 4 will not restore my backup to iOS7, I am getting the message your backup was corrupt or is not compatible with the iPhone that is beinng restored
Restore it as a new device first, then try again. If it still won't work, you're hosed, unless you can get hold of the old device and try backing it up again.
-
As part of my Photoshop and Lightroom subscription I understand I get the software for 2 devices activated at a time. Is the mobile version for my iPad in addition to this or would it be one of the 2 devices?
Hi rebecca,
You can download Acrobat from: Download Acrobat products | Standard, Pro | XI, X
and use the purchased serial number to activate the software.
Regards,
Rave -
I am trying to download ios7 onto my iphone 4s through itunes and keep getting the message "the software for the iphone was corrupted during download. Disconnect and reconnect then try again. Make sure your network settings are correct and network connection is active or try again later."
Try force quitting the app...
Hold the On/Off Sleep/Wake button down for a few seconds until a red slider appears, then press and hold the Home button until the app quits. -
I have given my 4th generation ipod touch to my husband and he wants to download some in app purchases, so I am trying to reset it via itunes. I dont remember setting parental controls but I must have at some point, maybe when I lent it to the kids. But I cannot remember the password and nothing I have tried works. So I have backed the ipod up and am trying to reset it but after speding 10 minutes doing a download I get a message that says:
"The softwaar for the iPod was corrupted during download. Disconnect and reconnect, then try again. Make sure your network settings are correct and your network connection is active, or try again later"
I have tried many times. All the settings are correct, and the network seems to be working fine in all respects.
Any advice very much appreciated.
Thank you
UPDATE - decided to try one more time after trying for hours and it has worked! I now suspect it may have been because my son was playing an online game. Though we have plenty of bandwidth. But in case, I guess it could be a bandwidth problem.A Complete Guide to Restore or Recover Your iDevice (or if you forgot your passcode)
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
If you need to restore your device or if you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to
update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I tried to update my ipad air from IOS 7.0.4 to 7.1 on iTunes. I clicked download and update, it started to download normally but when download finished iTunes shows error that "The software for the iphone was corrupted during download".
How can I fix this error ?I had the same problem. In the end I downloaded it manually. Here's the steps assuming you are on a Mac and have an iPad Air (Wifi). If not you can find other restore links here.
In the terminal (it kept failing to download in Safari):
curl http://appldnld.apple.com/iOS7.1/031-4521.20140310.D2Ydl/iPad4,1_7.1_11D167_Rest ore.ipsw >>~/Desktop/iPad4,1_7.1_11D167_Restore.ipsw
Once the file has downloaded, move it to ~/Library/iTunes/iPad Software Updates/
Quit and relaunch iTunes.
Should now work for you.
Maybe you are looking for
-
Hi, all, I am setting up an Https connection over apache and try to use mod_ssl.so to bridge with weblogic. I can make apache(modssl)-weblogic work(proxy all request:http/https to weblogic 7001 port). No problem. But i can't get info of my certificat
-
Subcontracting Multiple Vendors
Hi, i have one business process relating to subcontracting . material has to supply to subcontracting vendor2 directly from the subcontracting vendor1. in this scenario i have pay money to both subcontarcting vendors I tried this scenario but not abl
-
Oracle 8i install on 2000 terminal server
I seem to have a problem with my install on our terminal server. As I run the setup, it just fails. No errors or fanfair just stopps. Nothing in the even logs and I've tried all (I think) the setup.exe's on the CDROM. Can someone help me with this? P
-
What version of NeoOffice is needed for Yosemite?
What version of NeoOffice is needed for Yosemite? I have NeoOffice version 3.3. Will it run correctly on Yosemite?
-
hey guys, pls tell me how to extract the data from FI & Co to bw. i received a doc wherein they have provided 2 tcodes which was inbuilt by our company, one is for p&l summary fiscal year report and second one is orders report. pls tell me what r the