What do you do when your iphone get wet
what do u do when ur iphone get wet pls help
You can try putting it a bag of uncooked rice or silica gel pellets for a few days and see if after that time it works properly. If not, then you'll have to pay to have the iPhone replaced.
Good luck and regards.
Similar Messages
-
What do you do when your iphone gets disabled
My iphone got disabled and it says to connect to itunes and i did but i dont know what to do next
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
What do you do when your iPhone 4s falls into water
what do you do when your iPhone 4s falls into water
Turn it off, put it in a bag of dry, uncooked rice for 5-7 days and hope for a good outcome.
-
What do you do when your iPhone 5 fails to boot?
What do you do when your iPhone 5 fails to boot?
Have you tried restarting?
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost). -
What do you do when your iphone screen goes black
My phone died and i started charging it and when i did it charged but the screen was black but it vibrated like i was getting text messgaes but nothing would show up
Have you tried resetting your iPhone?
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
No data will be lost. -
What exactly breaks when your iPhone gets wet?
My wife dropped her phone in water and it appears to turn on. I reset it the screen is completely white, but when i slide my finger across the bottom I hear it unlock. Does this just call for the screen to be replaced?
Best wishes on getting the phone back to normal. I too dropped my 16GB brand new iPhone into water within a week and a half of buying it. I realized immediately that it would void the warranty and figured I'd need to spend the full price to get a new one.
My phone never turned itself off when I immersed it. I quickly shook it to get all the water I could out of it, then gently blew some compressed air in the openings. I turned the phone off and put it in a ziplock bag of rice overnight. I wrapped the phone in a tissue to ensure rice didn't get in the openings.
The next morning I turned the phone on and nearly everything was working but I kept getting an error that I was trying to use a device that wasn't compatible with the iPhone. I had a hard time getting anything to play in the iPod function. I fiddled with putting the headset in and out hoping the maybe the headphone jack was wet and I could dry it out. The iPod and youtube started working fine with the headset in but when I took it out I could get no sounds out of the phone (like some people report here when their phone acts like their headset is still in). All along my screen was fine and I could make and receive calls. I kept getting the same error message.
I turned it off again and put it back in the drawer with rice. I couldn't sleep I was so upset about having done this. I got up in the early morning and scheduled an appointment online with a Genius for that afternoon. At that point I took my phone out of the drawer and turned it on and everything worked fine!
I kept my appointment with the Genius and asked him if there was anything I should do and if it's likely it would keep working fine. He told me to be prepared for it to fail by ensuring everything was backed up, but that it may be fine. He also mentioned that he had never seen a phone that was in water look like mine...it looks just like it did out of the box. It's been about 3 weeks and everything is working great.
I hope you have the same success! I have never dropped a phone in water before and was horrified when this one flew out of my hand and into the open toilet!
I love my new phone. I'm actually a long time AT&T customer and had a previous 3G phone that didn't have nearly the functions of this one. -
What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.
It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier! -
what do you do when your phone numbers no longer have the contact persons name just a number. Also names are missing from the address book where contacts are.
I, too, love everything about my phone. The other day I tried to crash my Z10 by running multiple apps and having videos running in the background. Do you think my Z10 showed any signs of slowing down? Nothing doing! It ran as smooth as silk. I'm very impressed.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
What do you do if your iphone 3gs displays a thether picture to itunes? It won't change and after going to the manual and following directions, I find it is an error 1002. What does this mean?
Error 1002, 1011, 1012, 1014: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue.
-
What do you do when your connection times out?
When I try to buy a song a box pos up and says "could not purchase your song connection timmed out." What sould i do?
"What do you do when your connection times out?"
What would I do? Go to amazon.com and buy a non-DRM MP3 of the song I was looking for. -
What do yoou do when your iPad freezes up. My iPad is plugged in each night and is connected to Wi-Fi. This morning the following message appears:
iCloud Backup
"This iPad hasn't been backed up in 6 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi."
I press OK and it does not budge. I try to power off. The red arrow appears but it does not slide to power off. The iPad has simply frozen on the home page.
MikeTry resetting it by holding the power and home buttons at the same time until you see the Apple logo, then releasing. You won't lose any data by doing this.
-
How do you know when your iphone 4s is done charging if your phone is turned off?
Does it have to be turned on to see if it's hit 100%? I have an older generation Ipod that has a battery symbol when charging and you know it's 100% charged when all the bars are full- it comes up as an icon on the screen. This is my first time charging the phone since I got it so just nervous if it's actually charging.
If you plug your iPhone in to charge, even if it is turned off, it will turn on.
However, if you turn it off during a charge, there will be no notification that it has completed its charge. -
What do you do when your screen cracks ?
WHAT DO YOU WHEN YOUR SCREEN FOR THE iPOD TOUCH CRACKS?
gabbyfromeverett
check this link out:
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
The above link is for Service Center for iPod Touch. -
HT201250 what do you do when your backup does not finish?
What do you do?
Is that because you have insufficient space? Are you using an external HD for your Time Machine?
For the best guidance on anything to do with Time Machine see ...
Pondini FAQ
Or http://pondini.org/TM/ Troubleshooting.html -
What do you do when your iPod wont play aloud
how do i get my iPod to play aloud!
We need more information.
- Is this for the speaker or headphones or both?
- Did it just start? If yes did you do anything to the iPod like update the iOS?
- If headphones only have you tried another pair of headphones?
- In Settings>Music do you have volume limit turned on?
- Have you tried resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Maybe you are looking for
-
R12 Payable - Payment Process Request Report
I need to list payments ordered by vendor name in Payment Process Request Report. Currently I don't see any logic how payments are printed in "Payment Process Request" report. Does anyone know how to resort this report? Thanks, Joon
-
Windows jump and change to outlines when switching from one to the next
Windows 7 SP1, 64 bit, dual monitors, NON-transparent windows. When I hover the mouse pointer over an icon on the task bar, open windows disappear, leaving only the outline. When I select the one I'm over, things return to normal. Is there any way to
-
Booting from USB in Lenovo N200?
Is this possible? Looking in BIOS, there isn't a ready option for it and for some reason I'm not allowed to change from boot options anything else but the boot order.
-
How do I get rid of the EXS24 sample processing when I launch a project?
Whenever I launch a Logic project, I get a "Process" window that loads my EXS24 samples. This can be somewhat lengthy. I am using Logic 8 now, but this happened in Logic 7 as well; although, I don't remember it always being in place. Did I switch on
-
Adobe Premiere CC Pro compatibility issue with Blackmagic desktop video version 10.1.4
Dear Community, I have installed Adobe Premiere CC Pro 2014 and found out that Blackmagic device could not be selected. I have upgraded the Blackmagic dektop video to version 10.1.4. Now I can select the device from CC Pro but there is no audio