What do you think open source software is missing?

What do you think open source software is missing? Can be any general gripe, missing tools, missing support, etc.
I'm waiting for a skype replacement with a windows and linux client. I only use the video and voice functionality.

@ ngoonee
[I don't consider it OT, so I write it here - hope that OP doesn't mind]
Wrt Paul Davis, he seems to get $4-5k/month now so things are looking up a bit for him. Who's to blame if the community isn't able to come up with enough support for it's prime members? Also, there are parts of the world where you can live rather comfortably on $4k/month. You just have to beware of the dragons ;-)
Open Source is a lot like socialism: work as hard as you can, get as much as you need. In theory, it could work: some would eat 2x the avg but work 5x the avg while others would be the other way round. In practise ... People are lazy, people are evil.
Why should they pay for sth if they don't have to? Why should they be interested in GNU / Linux? Because it's free? Hey, I've got tons of "free" apps, piracy ahoy! (Or should I say "arrrrr")
Maybe that's the reason many 'big names' went to work for Microsoft: their dignity didn't allow them to beg for support.

Similar Messages

What do you think about this software? Reliable?

What do you think about this software? Reliable?
http://www.macupdate.com/info.php/id/23023/filesync
Or maybe Carbon Copy Cloner is better?
Thanks a lot!

I don't know Filesync, but to simply sync one folder to its backup I use SyncTwoFolders:
http://www.versiontracker.com/dyn/moreinfo/macosx/30727
To clone the entire hard drive to an external bootable hard disk I use SuperDuper, but CCC has an equally good reputation.

What happened to the Apple open source software page?

I have used a lot of the open source software that Apple listed on their website. The address used to be:
http://www.apple.com/downloads/macosx/unix_open_source/
But that just directs to a cheesy downloads page with links to app store, etc.
Does anybody know what happend to this part of the Apple web site? Is it just moved and I'm too dumb to find it? I've tried to search these forums, and the googles, but nothing coherant comes through!

This is the developer page though, and doesn't contain the wealth of applications that were hosted (and kept up to date). These included GIMP, carbon emacs, etc.
I realize many of these are available from macports, or even by building from the source in many cases, but some of these programs seem to have been only hosted and updated from this page.

What do you think of tune up software for iTunes?

What do you think of Tune up sofware for Itunes?

I agree. I've used iTunes since iTunes 9.0. The new 11.0 update is horrible. With the now missing left side menu, it's very difficult to navigate. You don't know where you are or where to go. I delete everything Apple from my computer, and inverted back to iTunes 10.7.
"No wonder Apple stock is loosing value."
Apple use to be Quality or Quantity.
Welcome to Apple 2012 : (

Huge Hole in Open Source Software Found, Leaves Millions Vulnerable

Huge Hole in Open Source Software Found, Leaves Millions Vulnerable
Debian, the Linux variant used largely by security professionals, and Ubuntu, the variant most commonly used by home users are both affected. Furthermore, Windows servers may be compromised as well if they are using keys generated on Linux systems.
Ironically the bug originated from an automated tool known as Valgrind which is supposed to reduce programming bugs which lead to security vulnerabilities. It found that a block memory was not being properly initialized, meaning that it would contain random information. The automated tool politely inserted code to clean up the block of memory making it all zeros. The only problem was that the system was intentionally using the block's unknown to get randomness to generate the keys. The library also gets randomness from mouse movements, keystroke timings, network packet arrival timings, and even microvariations in hard drive speed.
The Valgrind code caused errors, so the programmers simply commented out all the code, including the other methods of generating randomness on accident. Only the code which utilized the process ID, an integer ranging from 0 to 32,767, remained to provide randomness. It turns out the "fix" turned grievous error was not the work of the OpenSSL programmers themselves, but of the Debian team, known for their security expertise.
OpenSSL developer Ben Laurie raged, "Never fix a bug you don't understand! Had Debian [sent the bug to us] in this case, we (the OpenSSL Team) would have fallen about laughing, and once we had got our breath back, told them what a terrible idea this was. But no, it seems that every vendor wants to 'add value' by getting in between the user of the software and its author."

firewalker - this was discussed here and on our mailing lists at the time the vulnerability was discovered, approximately two weeks ago. It's always a good idea to search the forum before posting.
http://bbs.archlinux.org/viewtopic.php?id=48660
Thread closed.

I just purchased MBP and it is my first Apple computer. How concerned should I be about virus software and what do you recommend for security software?

I just purchased MBP and it is my first Apple computer. How concerned should I be about virus software and what do you recommend for security software?

1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
The following caveats apply to XProtect:
It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets (see below.)
It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
3. Starting with OS X 10.7.5, there has been another layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't actually been tested by Apple (unless it comes from the Mac App Store), but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe.
Gatekeeper has, however, the same limitations as XProtect, and in addition the following:
It can easily be disabled or overridden by the user.
A malware attacker could get control of a code-signing certificate under false pretenses, or could find some other way to evade Apple's controls.
For more information about Gatekeeper, see this Apple Support article.
4. Beyond XProtect and Gatekeeper, there’s no benefit, in most cases, from any other automated protection against malware. The first and best line of defense is always your own intelligence. All known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
That means, in practice, that you never use software that comes from an untrustworthy source. How do you know whether a source is trustworthy?
Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
5. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was never a good idea, and Java's developers have had a lot of trouble implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style "virus" affecting OS X. Merely loading a page with malicious Java content could be harmful. Fortunately, Java on the Web is mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers. In Safari, this is done by unchecking the box marked Enable Java in the Security tab of the preferences dialog.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a specific task, enable Java only when needed for the task and disable it immediately when done. Close all other browser windows and tabs, and don't visit any other sites while Java is active. Never enable Java on a public web page that carries third-party advertising. Use it only on well-known, password-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
Follow these guidelines, and you’ll be practically as safe from malware as you can be.
6. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
Why shouldn't you use commercial "anti-virus" products?
Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
7. ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
ClamXav is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
ClamXav may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use ClamXav unless a network administrator requires you to run an anti-virus application.
8. The greatest harm done by anti-virus software, in my opinion, is in its effect on human behavior. It does little or nothing to protect people from emerging threats, but they get a false sense of security from it, and then they may behave in ways that expose them to higher risk. Nothing can lessen the need for safe computing practices.
9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.

Adobe, what do you think about that ?

- one day I was demoing DPS to 35 people in Paris. The whole day the servers were barely accessible. For the reputation and reliability of DPS that was wonderful.
- another day I was doing a little DPS demo for Adobe. Again the same problem.
- another day, the demo was ruined because the servers were so slow.
- this Monday morning, I open my iPad and I can see my latest Folio in ACV.
In the afternoon I join Adobe reps and partners and other VIPs in London for the launch of CS6. There I go with my iPad and what a surprise when I want to show the Folio to an Adobe representative ?
Despite being signed in, all my folios where archived and all in Download state. I could not access a WiFi and even if I could I think that downloading 500 Mb would be impossible.
Many people where asking me :
—"And are you teaching DPS ?"
– I said "Yes, I'm even working on it for real projects."
— "Do you have one to show us ?"
– "No, because Adobe's software, for a reason that I don't understand, deleted all my folios a few moments ago and I would have to redownload them again. ACV sucks".
People to who I have talked to where Adobe people, chiefs of graphic studios (newspaper, agency,...), potential clients for DPS,...
There was even of Adobe person that told me : "We are receiving a lot of complaints about the technical model of DPS, and you're right, it's terrible".
There are so many problems with this app and with the servers.
DPS's reputation will may be better when one day we just play offline with the folios like a PDF in GoodReader for instance.
DPS is exploding my bandwidth.

Peter, that is sad. If a publisher decides to pull the issue from the
server, that's like burning down their own library of things.
Apple wanted adobe to stop downloading such large data into the storage
that will be backed up. So issues now go into the cache, that will not be
uploaded to the Icloud storage.
Because you buy a 64gb iPad, but get only 2Gb of online storage.
—Johannes
(mobil gesendet)
Am 26.04.2012 18:35 schrieb "Peter Villevoye" <[email protected]>:
Re: Adobe, what do you think about that ? created by Peter Villevoye<http://forums.adobe.com/people/Peter+Villevoye>in
Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4363125#4363125

Relying on 3rd-Party/Open Source Software for fully functionality in Vi

Is it just me or are open source software engineers doing a better job than actual Creative software engineers?
There are several threads linking to 3rd-Party hacks to get the majority of Creative Apps working in Vista. As well as this there are the KXProject Drivers floating around which appear to offer better compatability than the current Creative drivers.
What's going on Creative? How many Software Engineers do you actually have working for you?
Why is it, people you don't even pay are making much greater developments and progress in drivers and software for Vista?
But i guess they're not charging customers to purchase?updates on?CD. I remember when the Audigy was released, instead of offering downloads, Creative actually asked people to buy an updated CD with software and drivers on. Of course we were only?charged for postage, but very expensi've postage nevertheless.Message Edited by AnnoyedCustomer on 03-09-200703:3 PM

Hi welcome to the forum, I hope you find lots of help here and we look forward to your contributions as well
In regards to your questions:
1: No, you just put a swf file on the server
2. You can host the smaller app on your site and then give them an iframe linking to it
3. Nope, no problems there
Hope this helps
Best regards
Nikos

What do you think of my Bash Script? What about the error checking?

Well what do you think of this Bash script
It works
I gave it some problems (i.e. unpluged the ethernet, messed up the URL's, uninstaled some programs...) to see if would report errors and stop or just keep going... But it did
I just kind of thought up a way to do some error checking with the commands that I know.....
What is a better way to do error checking?
What do you think I should add/Do to this script?
#!/bin/bash
# Shell script to make a USB Tumb Drive for Flashing BIOS on a Lenovo Ideapad Y510.
# This script needs to be owned and run as ROOT with the "sudo command"
# i.e. sudo usbbiosflasher
# If you have anyideas send me a PM on ubuntufourms.org my user name is HunterThomson
# Name/Rename this script usbbiosflasher and save it to the ~/home directory.
# Then run the command- chown root:root usbbiosflasher
# Then run the command- chmod 755 usbbiosflasher
# Then copy the script to the directory /usr/bin.
# Run this comand to do that- sudo cp ~/usbbiosflasher /usr/bin
# You also must have the program "mbr" installed
# You can install the mbr program by running this comand in the shell on Ubuntu
# sudo apt-get install mbr
# In Arch Linux you have to get it from Aur
# First you will need to know a few things...
# You will also need to know the Mount Point i.e. /media/disk and the /dev path i.e. /dev/sdb1.
# You can find these by using the df -T comand.
# Run df -T in the shell. Then plug in the USB Thumb Drive and run the df -T comand agin.
# The new listing is the USB Thumb Dirve.
# Also check to make sure the File System tipe is vFAT or FAT16 or FAT32.
# If it is not use gparted to format it to FAT32.
# I am farly certen that all USB Thumb drives come formated with FAT file system out of the BOX.
# You may want to fromat it anyway just to make sure.
echo "Interactive Shell Script to Make a USB Thumb Drive \for Flashing BIOS On a Lenovo Ideapad Y510"
echo ""
echo "You will need to have the program mbr installed"
echo "If you are on Ubuntu Linux you can retreve it form the repositories"
echo "If you are on Arch Linux you will need to get it from the Aur repository"
echo "Open anuther shell and \do that now..."
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
echo ""
# The next comand will make a directory to put needed files into. Note this file and everything init will be owned by root.
mkdir ~/usbbiosfiles && check1="yes"
if [ "$check1" = "yes" ]
then
echo "Made directory usbbiosfiles... OK"
else
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit
fi
# The next two comands will get the FreeDOS file and the .ROM file.
cd ~/usbbiosfiles && checka="yes"
if [ "$checka" = "yes" ]
then
echo "Changing to the usbbiosfiles directory... OK"
else
echo "Could not Change to the usbbiosfiles directory"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://www.fdos.org/bootdisks/autogen/FDOEM.144.gz" && check2="yes"
if [ "$check2" = "yes" ]
then
echo "Download of FreeDOS... OK"
else
echo "Could not Download FreeDOS"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://ubuntuforums.org/attachment.php?attachmentid=78460&d=1216648756" && check3="yes"
if [ "$check3" = "yes" ]
then
echo "Download of the BIOS.ROM \file... OK"
else
echo "Could not Downlad the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
# The next comand will name the .ROM file to the right name.
mv ~/usbbiosfiles/attachment.php?attachmentid=78460\&d=1216648756 ~/usbbiosfiles/06CN29WW.bios.update.tar.bz2 && check4="yes"
if [ "$check4" = "yes" ]
then
echo "Renameing of the BIOS.ROM \file... OK"
else
echo "Could not rename the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
echo ""
# The next two comands set the variables. DEVX for the path i.e. /dev/xxx and MOUNTX for the mount point i.e. /media/xxx
verify="n"
while [ "$verify" != y ]
do
echo "You will need to know the Mount Point and the dev Path. You will also need to \make sure the File System \type is vFAT, FAT16 or FAT32."
echo ""
echo "With the USB Thumb Drive unpluged, Open another shell and run the comand df -T Then plug \in the USB Thumb Drive and run the comand df -T one \more time. The new device listed is the USB Thumb Drive. Note the Mount Point and The dev Path and the File system Type i.e. vFAT... If the File System \type is not vFAT, FAT16 or FAT32 you will need to fromat it with gparted. You may want to format the USB Thumb Drive anyway just to \make sure. In any \case delete all files and directorys on the USB drive before you go any ferther with this program."
echo ""
printf "Enter the dev path the USB Thumb Drive is at?"
read DEVX
echo ""
echo "Are you sure $DEVX is the dev path of the USB Thumb Drive... y or n?"
read verify
done
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "What is the Mount Point of the USB Thumb Drive?"
read MOUNTX
echo ""
echo "Are you sure $MOUNTX is the Mount Point of the USB Drive... y or n?"
read verify
done
echo ""
install-mbr --enable A1 --partition 1 --force --timeout 0 $DEVX && check5="yes"
if [ "$check5" = "yes" ]
then
echo "Installing MBR on USB Thumb Dirve... OK"
else
echo "Could not install MBR on USB Thumb Drive"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
tar xjf ~/usbbiosfiles/*.tar.bz2 && check7="yes"
if [ "$check7" = "yes" ]
then
echo "Unpacking BIOS.ROM file... OK"
else
echo "Could not unpack BIOS.ROM file"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
gunzip ~/usbbiosfiles/FDOEM.144.gz && check8="yes"
if [ "$check8" = "yes" ]
then
echo "Unpacking FreeDOS files... OK"
else
echo "Could not unpack FreeDOS files"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mkdir ~/usbbiosfiles/fdoem144 && check9="yes"
if [ "$check9" = "yes" ]
then
echo "Made directory fdoem144 in direcoty usbbiosfiles... OK"
echo ""
echo "Going to \sleep \for 5secs"
else
echo "Could not make directory fdoem144 in usbbiosfiles directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
modprobe loop && sleep 5 && check0="yes"
if [ "$check0" = "yes" ]
then
echo "Modprobeing loop... OK"
else
echo "Could not \modprobe loop"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mount -o loop ~/usbbiosfiles/FDOEM.144 ~/usbbiosfiles/fdoem144 && check10="yes"
if [ "$check10" = "yes" ]
then
echo "Mounting FreeDOS on the fdoem144 directory... OK"
else
echo "Could not \mount FreeDOS on the fdoem144 directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/fdoem144/* $MOUNTX && check11="yes"
if [ "$check11" = "yes" ]
then
echo "Copying FreeDOS files to $MOUNTX... OK"
else
echo "Could not copy FreeDOS files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/*.ROM $MOUNTX && check12="yes"
if [ "$check12" = "yes" ]
then
echo "Copying BIOS.ROM files to $MOUNTX... OK"
else
echo "Could not copy BIOS.ROM files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
sync && check13="yes"
if [ "$check13" = "yes" ]
then
echo "Runing the syncing command... OK"
else
echo "Could not run the syncing command"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
umount ~/usbbiosfiles/fdoem144 && check14="yes"
if [ "$check14" = "yes" ]
then
echo "Unmounting of FreeDOS... OK"
else
echo "Could not unmount FreeDOS"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
fi
verify="n"
while [ "$verify" != y ]
do
printf "Do you see any errors... yes or no?"
read AN2
echo ""
printf "You answered... $AN2 to errors. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN2" == "yes" ]
then
echo "User Repoted... Error"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
else
echo "Success"
echo "I did a lot of error checking too and didnt find anything"
echo ""
echo "Go get a pen and paper to write down these instructions"
printf "Then hit the Enter to continue"
read WAIT
echo ""
echo "Now leave the USB Thumb Drive pluged into your computer and Reboot. When the Lenovo Logo POST screen appears hit F2 to enter the CMOS setup utility. Go over to BOOT tab and go down to HardDrive \(Not Boot Order) \then \select the USB Thumb Drive as the 1st hard drve. Then F10 and yes to save changes. Your compter will reboot agin. Then when the Lenovo Logo POST Screen appers on reboot hit F4 to enter the BIOS FLASHING program. The USB Thumb Drive will be seen as the C drive \in the list on the Left, Select it. Then \select the .ROM \file \in the list on the Right and start the BIOS FLASH. \(NOTE Your hart may stop beating... This is normal) Pray to any God you know of and your computer should restart just like normal. Hit F2 and the BIOS will now stay it is 06CN29WW. You will need to \set the boot order to the way you like it and other things \if you need to because they have been changed to the default."
fi
echo ""
echo "End of script"
Last edited by hunterthomson (2008-08-10 11:17:47)

Personally..... (this is just how I would have written it - if it works, then it's good enough for me though )
I would change this whole block:
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
To this much shorter code:
MBR='/usr/bin/install-mbr' # Or where ever you expect it to be
if [ ! -x $MBR ] ; then
echo "mbr doesn't appear to be installed."
echo "If it is installed, check it's location, make sure it's executable and then make sure the MBR variable in this script is correct"
exit 1
fi
I wouldn't have used the checkXX variables for each stage:
mkdir ~/usbbiosfiles
if [ $? != 0 ] ; then
#failed
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit 1
else
echo "Made directory usbbiosfiles... OK"
fi
There is an issue with the way you do your verifications - the user can never get out unless they answer 'y' or hit CTRL+C. Something like this gives them options:
verify="n"
while [ "$verify" != "y" && "$verify" != "n" ]; do
echo "You need to answer 'y'es or 'n'o"
read verify
echo $verify | tr "[:upper:]" "[:lower:]" # This converts the answer to lowercase so replies entered in upper case will still work
done
if [ $verify != 'y' ] ; then
exit 1
fi
One last thing I try to do in scripts... Declare all your binaries as variables at the start of the program, then execute the binary program by using the variable. For example:
# Binaries
TAR='/bin/tar'
CP='/bin/cp'
CHMOD='/bin/chmod'
# Execute tar and chmod the created file
$TAR cvzf /tmp/tarfile.tar.gz /etc/*.conf
$CHMOD 400 /etc/*.conf
This way, it's easy to change the path in future without having to hunt through the script if the paths change, and it also ensures you're calling the programs using the full paths to make sure you're not executing some strange variant or alias that someone has setup. If I use `chmod` 30 times in a script, and the path changes in the future or on a different system (`chmod` is a bad example cause it's highly unlikely to change, but you know what I mean), then all you need to do is update the variable at the start of the script, and it all works again without having to script-hunt and change it 30 times.

Lack of SD card slots what do you think

I don't know about the rest of you, but I like my stuff on an SD card. Not in a cloud. It seems Motorola, Verizon, and android all want you to put your stuff in the cloud. I'm sorry but I like my privacy and I like to access my content even when I have no signal. The cloud is for morons who don't realize their stuff can be hacked. If the Pentagon can be hacked, so can the cloud. Verizon, give us the option. Quit force feeding us stuff that a bunch of techno geeks sitting around and dream up. I have been a loyal customer for years and your trying my patience. I like my Droid Razr MAXX HD. It has served me well for 2 years in some of the worst environments. It has never failed me and I think you hit the nail on the head when you introduced it. But you took a moronic stance and quit offering it. You got it right and then screwed it up. The only complaint I had was all the bloat ware. Give us the choice. We buy the phone, it is ours, we should be the ones to decide what stays and what goes. Not some ***** sitting in marketing. If you want to introduce it, then do so but allow the people the choice of what stays and what goes. It will cost you customers in the future if you don't, including me. Have a nice day!!!!

You ask "what do you think".
I think that your message would/will be better received if you didn't resort to name calling and "colorful" language.
You/we will never win the "argument" over what you term "bloatware". Verizon enters into financial agreements with the providers of that software to be able to install it on the devices. They make a lot of money (presumably) on this, so it is not likely to end.

What do you think of new Cisco NSS 300 Smart Storage?

Did you see the press release of the new Cisco NSS 30 Smart Storage?
http://newsroom.cisco.com/dlls/2010/prod_060910.html
What did you think?
More informaion about the product can be found at http://www.cisco.com/go/smartstorage

I guess no one from Cisco is going to repond to your post Johnny.
I agree with your thoughts, and was excitedly looking forward to Cisco's entry in the small NAS market and rushed out to buy a NSS326 (Equiv to QNAP TS-659) Unit. I already own a QNAP TS-639 older model for 1.5 years and loved it - and expected Cisco just to make this even a better unit. Which in some ways they have (Syslog and Radius features) - although as you've already noticed, elimation of QPKG application support which numbers up to almost 2 dozen applications that are not available on Cisco's version
Unfortunately if you look on eBay, you'll see my NSS326 up for sale.
To address your points (from my point of view)
1) ROCK SOLID: I've found the hardware to be just that (on both units). Built well, and I'm sure will last for years.   As for software stability, - see next
2) FAST FIRMWARE UPDATES: It's for this reason that the unit is up for sale.   V3.0 of the firmware was a major release. And there have been issues - although many/most of them have been addressed with still a few (somewhat serious) issues still lingering.   QNAP seems to be attacking these fairly quickly.   Unfortunately there has been 2 releases from QNAP addressing issues since Cisco's adoption of this unit since v3.2.6.   As you'll see in these posts, Cisco is not following QNAPs releases, and will be releasing their own line of firmware. For me, this is a serious issue - and I wish I knew this before purchasing. I feel Cisco is already 2 releases behind which includes many fixes to their current platform. (Also see QPKG note above - many missing applications)
3) SUPPORT: This is where Cisco excels and always has.   To start 5yr vs 1yr warranty, and of course Cisco TAC is one of the best in the world. In contrast, QNAP's support quite frankly isn't great - although, it's support community for forums are excellent.   Unfortunately I can't speak specifically on NSS support since I haven't called them for this, so I'm speaking more generally.
So it really boils down to whats more important for your situation.
Cheers

What did you think of iMovie '11?

I am thinking about buying a new mac but I'm only really concerned about the movie making software. I have used iMovie a few years ago and I liked it for the most part but I want some personal feedback on it. What did you think of the new software? What has changed in the last few years? Anything important that I should know?

Hi
If You last used iMovie HD6 then the change is severe - it's a compleately new tool.
If iMovie'08 or 09 the difference is not that great.
Some I listed as
*iMovie 09 (v8) 8.0.6 (jan 2009)*
• Far better than iMovie 08 but still far from good.
• Pic in pic, green screen but basic
• Image stabilization - fairly good for amateur use
• Speed-up/down and reverse
• Bl/W, Old age etc
• Still - No Continous TimeLine
• NO - Possibilities to enhanze by use of thirdpart Plug-ins (all investments lost)
• NO - Playback via Camera/FW - and this prevents 100% safteybackups and the use of an extra TV/Monitor as real-time Quality control (as in iM 1 to HD6)
Aimed at - speed editing small video projects to be presented on the Internet - NOT DVDs
*iMovie 11 (v9) 9.0.x*
• Will be - Intel Only
• Snow Leopard minimum Mac OS X.6.3
YES
• Advanced view including a true TimeLine ? Yes but rudimentary (very basic)
• True Storyboard - where You even can write and prepare space for lacking material that needs to be obtained or re-shoot. YES
• Better wave-form presentation of audio and audio tools - Rubberband - Yes
• Trailer creating tool
• ”Faces” as in iPhoto - NO - but this finds if there are people in some video-clips
• Better audio tools. Equalizer and a background audio reducer
• More Camera support eg 24fps
NO
• not 64-bit only
• The Playback to Camera via FW - returns ? NO
• Full Quality to iDVD - NO - still only half - every second line
• Plug-in facility ? - NO
• No free text tool
• Tool to mask an identity eg band over face or unsharp area. - NO (could be obtained via Plug-ins in iM HD6 and earlier)
• Animation tool - To point on interesting object/player - NO animations refere to a totally different
thing connected to Storyboard and insert of ”dummy animations” while building a movie
Yours Bengt W

Dear apple management, I have purchased I pad mini e few days ago. I need help as follows: (1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ?

Dear apple management, apple support communities
I have purchased I pad mini e few days ago. I need help as follows:
(1) Camera: i did take a few photos but something has gone wrong. As i press the camera icon, I get a blank dark black screen. What do you think has gone wrong ? HELP URGENTLY REQUIRED.
(2) How do i sync my pc with I pad mini?
(3)i can read on i pad mini file made in microsoft excel but all numbers are very different from the original document. What is the solutuon?
Dr Uma S Nayak
<Personal Information Edited by Host>

You are talking to fellow users on these forums, not iTunes Support or Apple - I've asked the hosts to remove your phone number from your post.
For the Camera app, try closing it via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar at the bottom of the iPad's screen, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
In terms of syncing, you will need iTunes on your computer - if you haven't already downloaded it then you can do so from here : http://www.apple.com/itunes/download/
You can conncet the iPad to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar on iTunes 11 on a PC via control-S), and use the tabs on the right-hand side of the iTunes screen to sycn your content to the iPad.
Syncing music : http://support.apple.com/kb/HT1351
Syncing apps : http://support.apple.com/kb/PH12315
If you haven't yet synced your iPad to your computer you may also find this page useful : https://discussions.apple.com/docs/DOC-3141
For the excel file, what app are you viewing/editing it in ? If the values are different then it may be that the app that you are using doesn't support all the formulas that are being used in the spreadsheet. Apps that 'support' excel documents include Apple's Numbers app, and from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD.

Has anyone switched from Parallels 4 to VM Fusion 3 - What do you think?

I am considering the jump, as I have been really impressed with VM Ware's instructional videos. The product looks solid.
Has anyone else made the jump? What do you think?
Thanks!

I've been playing with them both on the same machine because I had the Fusion 3 beta. My experience has been through accessing Boot Camp.
Both do a fine job of accessing Boot Camp, but I found that Parallels is less of a headache than Fusion because every time you boot in to fusion it asks for a password, and if you are not running as administrator then you are asked for the password several times. If you are no an administrator, and do not know the administrator password then I am not sure how you can use fusion. Parallels does not seem to ask for this, which means you can set Parallels to start up the virtual machine and it does so without trouble.
I did notice that Parallels triggers reactivations of the Microsoft software, which is annoying. I have not tried fusion with Windows 7, so do not know what will happen with that. Interestingly, Parallels works OK with fusion installed as well, but Fusion did not seem to like Parallels. The reason I have both is that I got Fusion 2 with my Macbook and parallels 4 free with a MacUpdate package.
I found that bi-directional copy and paste seemed to work more cleanly in Parallels than Fusion, but I see little or no difference between their general operation. It is hard to tell if there is a speed difference. Parallels does not support AERO on Windows 7, but who cares about that?
The upgrade cost from Fusion 2 to 3 and from Parallels 3 to 4 are both reasonable, but it seems like fusion is $10 less expensive at $39. Those of us in education get it for $19, which means I might pay to upgrade anyway.
I am a long time Fusion user, I switched to Fusion and really liked it, but right now I am also happy enough with Parallels and cannot tell any real difference other than easier startup. One thing that is really nice about fusion, that could take me back is that they have a menu bar icon to access the start menu and it is really slick. Parallels relies on the dock icon and it is flakey.

What's the Best Open Source DB for use with Kodo?

Hi everyone,
In terms of ease of setup and use, tools to view info in the database, and least difficulty in
running with Kodo, what is the best open source database to use? I'm use to using Oracle and
SQLPlus. I need to use an open source DB for a learning environment, and I'd like your informed
opinion.
Thanks,
David Ezzio

I have been using postgresql 7.1 with Kodo for a while with mostly positive results, and currently
have it deployed with Kodo 2.2.3. I prefer it to mysql because its feature set is a little richer,
and supports transactions natively. My experience with mysql (without jdo - I haven't tried it with)
is good, but there were little things missing in mysql 3.x, e.g. the ability do do a join in a
DELETE statement.
BTW, there are some severe problems somewhere in the 2.2.4 release with postgresql if you intend to
eventually deploy on it. It also apparently has some problems invoking postgresql's indices, making
it a little less than optimal. But as a learning environment, it's what I'd recommend.
-Mike
Marc Prud'hommeaux wrote:
David-
Here is the rundown of the databases I have experience with:
MySQL: Fairly simple to install (especially if you run Debian Linux), but
configuration, especially adding users, can be a pain. A separate open
source project called "mysql-navigator" makes it fairly easy to do
simple queries, inserts, etc. In most of my tests it outperforms
PostgreSQL, but your mileage will vary. It has a sane CLI that supports
modern features like line history, etc (unlike the horrific SQLPlus).
PostgreSQL: People often say that it is a more "academically
correct" database than MySQL. I've also found it to be quite a bit
easier to set up. Their GUI (called "pgaccess") is simplistic, but does
most things you need. Has a CLI similiar to MySQL's.
HypersonicSQL: By far the easiest to set up (just drop the jar in your
CLASSPATH), but is java only, can be rather slow, and has no GUI tools
available that I know of (except various free vanilla-JDBC GUI tools).
We feel that Kodo works quite well with all these DBs. The MySQL JDBC
driver seems a bit less buggy than Postgres', but their transaction
support is very recent and not very well tested. If I had to pick one or
the other, I would probably go with MySQL.
David Ezzio <[email protected]> wrote:
Hi everyone,
In terms of ease of setup and use, tools to view info in the database, and least difficulty in
running with Kodo, what is the best open source database to use? I'm use to using Oracle and
SQLPlus. I need to use an open source DB for a learning environment, and I'd like your informed
opinion.
Thanks,
David Ezzio--
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com
Kodo Java Data Objects Full featured JDO: eliminate the SQL from your code--
Mike Bridge

What do you think open source software is missing?

Similar Messages

Maybe you are looking for