What do you think the best PS3 model is?

Hi. When buying my PS3 this week it was really hard to choose what PS3 model to buy. I read LOADS online about what the best models are and after reading about the fat's YLOD issues and the super-slim's cheap design, I chose the 250GB Slim model. What model do you have and what is your favorite? let me know!

I managed to source a unopened 160gb Slim. Took about a week but theres something about the design that makes it worth it. Only paid £80 for it too Threw in a 1tb Harddrive and hell I'm one happy guy. They clearly are the best model. Its not a george foreman grill and it's not a cheap bit of plastic. I might get a superslim just incase as a spare as I have no intention of dropping PS3 games even once I pick up a 4 but they need to drop massively in price before I do

Similar Messages

I want to get the iphone 5s the day it comes out. Do you think the best way is to go to the apple store or wait at Verizon. I know when the iphone 5 came out here that they sold out at Verizon. The closest apple store is an hour away.

I want to get the new iPhone 5s right when it comes out. I was just wondering what you guys thought. Should I go to the apple store (closet one is an hour away and always busy) or should I go to my local Verizon store. I know when the 5 came out last year they ran out of the iPhone 5. What do you think my best bet will be??

There's really no way anyone can even guess, since we have no idea what sort of stock will be available and how Apple will distribute it. It's not impossible that your local Verizon store will not have any units at all on the first day, or they could have a quantify. We just can't know. If your Verizon store can't give you some idea, you'll just have to make your best guess. Note that people are already lining up at Apple Stores in at least a couple of cities according to reports, and started doing so earlier this week.
http://news.cnet.com/8301-17938_105-57601882-1/lines-forming-at-apple-stores-in- advance-of-iphone-launch/
Regards.

Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. This shows up even when I am not connected to a USB. what do you think the problem is?

Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. - This is what shows up sometimes even when no USB is connected. What could be the reason?

Try a different USB cord, seen this many many times, its highly likely a damaged USB cord.
Restart the computer to redefine Port definition. If still a problem
You can also resetting PRAM/NVRAM: http://support.apple.com/kb/ht1379
MacBook Pro (15-inch Mid 2012), OS X Mavericks (10.9), i7 500GB 16GB RAM iPhone5 iOS7.0.3

, i have canon 70d and element 12 and can't download my raw photos.what do you think the problem

cant download my raw photos to element 12. I have canon 70d. pc

we have elements 13 will work my partner has a 70d as long as u open raw files in ( open in raw files it will work) i was asked to do this yesterday and worked ok. elements 12 and below will not as i have an earlier edition with the same problem.

Best IDE & Platform Configuration? What do you think?

What do you think the best IDE is out there? I want to compile and create applications as well as servlets and beans, but my focus would be on the beans, servlets, jsp, etc, the web stuff. Once I have the IDE for that, what is the best configuration for developing under that environment. For example I would like to use the the JavaMail API as well, and that is available for the J2EE. So I can install both the J2SE and J2EE SDK's right? Should I accept their default installation directories? Is it possible to move files, the .jar files for example over the to a single directory for centralization? Help, trying to get an understaning how to create a nice development environment. Simple, efficient, etc.
Thanks so much!!
Terry

I personally think Eclipse is outstanding. I used JBuilder for a while, but it insisted on formatting code the JBuilder way. Eclipse also has refactoring, which is a major bonus. Moving classes is now a few clicks instead of performing a search-replace on all your files. There are UML and dozens of other types of plug-in.
As far as setting-up your environment, I normally duplicate a web application's deployment. So, the external JAR's I need are in WEB-INF/lib. The IDE should take care of classpath issues, if you perform the initial project set-up properly. I would also learn Jakarta's Ant. It makes deployment a lot easier, at the expense of some up-front development.
- Saish
"My karma ran over your dogma." - Anon

HOW CAN I START DOWNLOADS AUTOMATICALLY? I DON'T NEED TOO SEE THE SAVE OR DISCARD BOX. THIS BUGS THE CRAP OUT OF ME. CAN I CHANGE THIS, OR ARE WE FORCED TO DO WHAT YOU THINK IS BEST? THANKS, KEITH D.

HOW CAN I START DOWNLOADS AUTOMATICALLY? I DON'T NEED TOO SEE THE SAVE OR DISCARD BOX. THIS BUGS THE CRAP OUT OF ME. CAN I CHANGE THIS, OR ARE WE FORCED TO DO WHAT YOU THINK IS BEST? THANKS, KEITH D.

Hey, Jeff...
I don't know how I could have made my question any more clear -- so let me try approaching it the other way around, and refer back to your answer(s).
You've been responding by saying that it's okay for me to remove the Creative Cloud versions of my software, but I don't have any Creative Cloud versions installed! I'm not talking about that at all, I'm talking about the software for Creative Cloud itself -- I don't use it, I don't need it, I don't want it, and all it does is nag me, telling me that there's updates for it (Creative Cloud). I have the full Adobe Creative Suite 6 Design Standard bought and paid for, I have no reason nor need to "rent" any later versions, I'm just talking about the Creative Cloud software itself that got installed on my system when I installed that suite of programs.
Like I said, I don't use Creative Cloud at all -- all it does is "nag" me, and eat up space on my hard drive. When I go in my Windows Control Panel and look at my list of installed programs, there it is -- "Adobe Creative Suite" -- and it's listed separately from "Adobe Creative Suite 6 Design Standard" (of which I've only installed Photoshop, Acrobat and InDesign, basically, as those are the only programs I use at all at the moment). Can I just uninstall "Adobe Creative Suite" without it affecting "Adobe Creative Suite 6 Design Standard", i.e. my Photoshop, etc. will still work just fine, and I can still get updates and stuff? And by "updates" I don't mean get later versions of Photoshop, etc., I just mean any possible updates to the software that I do already have (that comes with Adobe Creative Suite 6 Design Standard).
I hope that makes my question a little more clear?

What do you think is the best APPS?

So after downloading a few apps I would like to know what do you think is the best Free apps and best paying apps you have.
MY BEST FREE APPS
1.) Facebook
2.) Myspace
3.) Bank of America
4.) Ebay
5.) TMZ
MY BEST PAYING APPS
1.) Touch Grind
2.) Deal or no deal
3.) Price is right

Depending on the specs of your computer, time taken to convert DVD's to an iPod-playable format can vary. On my computer (see below), it takes about 10 hours to convert a 2-hour DVD to the iPod format, using Videora.
So, due to the extremely large size of the DVD rip, it'll take a while to convert it, regardless of how fast or slow your system is.

What do you think about the html5?

I've been seeing developers philosophizing about the future, and I want to know what do you think about the brand new html5?
mainly because the html5 can take out of the market technology ( flex ).
thanks for the opinion!!!
[email protected]

Yep this is most definitely not just a rumor, I've found plenty of sources talking about this.
Here's someone's take on HTML5, a non-Adobe perspective, from a Silverlight developer. I thought this would be interesting to mention. Not sure I agree 100% with everything said (IE may not be most used browser and I don't believe in DRM), but it's an interesting read anyway:
Yes, you can do a LOT of stuff with HTML5 + JS that Silverlight is good for. But HTML5 will only reach Candidate Recommendation status in 2012 - if Silverlight keeps the current pace, it will be at V7 by then.
HTML5 will only get you approximately what Silverlight had at V1.0. A Canvas element, some video playback capabilites, and a Javascript programming model. Can you imagine how further advanced Silverlight 4 is at the moment?
Actually, scratch that - the video quality and availability of HTML5 is a lot worse than what Silverlight has to offer. There is no DRM, no Smooth Streaming, not even full screen! No GPU acceleration either. Even the codec HTML5 has to support is not standardized! This results in Firefox 3.6 having only Theora decoder, and Youtube experimenting with HTML in H.264 (on the same day FF3.6 launched), only playable in approx. 4-5% of the world's browsers.
Internet Explorer is still the most widely used browser on the web, and does not have HTML5. Currently, there are more Silverlight capable browsers browsing the web than HTML5 compatible ones. I don't think that in the next 3 years you will be able to create an HTML5 app and hope that at least 50% of the world's population can view it without switching browsers. (and remember: installing a plugin is a lot less hassle than switching to a new browser!)
HTML5 will not be truly cross-browser standard for quite a long time, if ever. There are too many things that the browser developer can do as they wish - just think about the aforementioned video codec issue. There are too many little differences in each browser's Javascript implementation to make it really portable.
The developer story: nothing in the HTML + JS world comes close to the awesome Visual Studio and Expression Blend tools. Javascript is cool for small apps, but cannot hold a candle to C# when it comes to serious development. Fighting with browser and OS incompatilities takes up a huge amount of time for any HTML website or web app - with Silverlight you don't have this.
Just compare what the best HTML / Ajax company in the world (Google) did with maps, and what MS did to see the difference. Go tohttp://maps.google.com/ (watch out - the Streetview part is in Flash, not Ajax), and compare it to http://www.bing.com/maps/explore/. That is the difference I am talking about.
Of course he means (or should have meant) Flex/Flash rather than just Flash. As for the GWT and other AJAX fanboys who I guess think browser compatibility problems are going to be a thing of the past (or won't be a drag on corporate bottom lines - haha), it makes you wonder what other wild fantasies they're envisioning for the future. Next they'll come and tell us XML-based protocols are going to be as fast as AMF...

Best text chat option between PC/Mac - What do YOU think?

Hi,
What do YOU think is the best text chat option between PC's and Mac's. I am setting this up between a mac and PC and would really like to hear what people think is the best and easiest option.
Many thanks...

Adium is a really nice client that works with all IM networks.
As far as text only IM goes, they are all the same really... and most official clients suck. Go with Adium so you could use any services.
Also the default iChat works with AIM on PC's.

I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how? Thanks!

I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how?
If not why option available
Thanks!

What Carolyn says is correct. You can, however, share an Internet connection with your iPhone wirelessly by turning in Internet sharing (found in System Preferences > Sharing.) If your MacBook Pro is already using a wireless connection, you can just connect to the same wireless network it is using.
Best of luck.

Oracle Security : what do you think about the following policy violation ?

If you install OEM10, you will be able to see if you violate some security guidelines :
Interresting is revoking UTL_FILE from public, which is critical. Also revoke UTL_TCP and UTL_SMTP. This is going to upset an expert I know...
Take care about the failed login attempts. If you set it to 10 to the default profile, and if your DBSNMP password is NOT the default password, then Oracle will lock your account after node discovery!
In Solaris, you can disable execution of the user stack with the system parameters set noexec_user_stack=1
set noexec_user_stack_log=1. I did not find how to do it on AIX. However, those settings may have side effects.
About the ports, it complains about open ports, even if this is the port oracle listener is using! Simply ignore most of the violations there.
About JAccelerator (NCOMP), it is located on the "companion" CD.
Ok, Waiting for your feedback
Regards
Laurent
[High]      Critical Patch Advisories for Oracle Homes     Configuration     Host     Checks Oracle Homes for missing critical patches
[High]      Insufficient Number of Control Files     Configuration     Database     Checks for use of a single control file
[High]      Open ports     Security     Host     Check for open ports
[High]      Remote OS role     Security     Database     Check for insecure authentication of remote users (remote OS role)
[High]      EXECUTE UTL_FILE privileges to PUBLIC     Security     Database     Test for PUBLIC having EXECUTE privilege on the UTIL_FILE package
[High]      Listener direct administration     Security     Listener     Ensure that listeners cannot be administered directly
[High]      Remote OS authentication     Security     Database     Check for insecure authentication of remote users (remote OS authentication)
[High]      Listener password     Security     Listener     Test for password-protected listeners
[High]      HTTP Server Access Logging     Security     HTTP Server     Check that HTTP Server access logging is enabled
[High]      Web Cache Access Logging     Security     Web Cache     Check that Web Cache access logging is enabled
[High]      Web Cache Dummy wallet     Security     Web Cache     Check that dummy wallet is not used for production SSL load.
[High]      HTTP Server Dummy wallet     Security     HTTP Server     Check that dummy wallet is not used for production SSL load.
[High]      Web Cache owner and setuid bit'     Security     Web Cache     Check that webcached binary is not owned by root and setuid is not set
[High]      HTTP Server Owner and setuid bit     Security     HTTP Server     Check the httpd binary is not owned by root and setuid bit is not set.
[High]      HTTP Server Directory Indexing     Security     HTTP Server     Check that Directory Indexing is disabled on this HTTP Server
[High]      Insufficient Redo Log Size     Storage     Database     Checks for redo log files less than 1 Mb
[Medium]      Insufficient Number of Redo Logs     Configuration     Database     Checks for use of less than three redo logs
[Medium]      Invalid Objects     Objects     Database     Checks for invalid objects
[Medium]      Insecure services     Security     Host     Check for insecure services
[Medium]      DBSNMP privileges     Security     Database     Check that DBSNMP account has sufficient privileges to conduct all security tests
[Medium]      Remote password file     Security     Database     Check for insecure authentication of remote users (remote password file)
[Medium]      Default passwords     Security     Database     Test for known accounts having default passwords
[Medium]      Unlimited login attempts     Security     Database     Check for limits on the number of failed logging attempts
[Medium]      Web Cache Writable files     Security     Web Cache     Check that there are no group or world writable files in the Document Root directory.
[Medium]      HTTP Server Writable files     Security     HTTP Server     Check that there are no group or world writable files in the Document Root directory
[Medium]      Excessive PUBLIC EXECUTE privileges     Security     Database     Check for PUBLIC having EXECUTE privileges on powerful packages
[Medium]      SYSTEM privileges to PUBLIC     Security     Database     Check for SYSTEM privileges granted to PUBLIC
[Medium]      Well-known accounts     Security     Database     Test for accessibility of well-known accounts
[Medium]      Execute Stack     Security     Host     Check for OS config parameter which enables execution of code on the user stack
[Medium]      Use of Unlimited Autoextension     Storage     Database     Checks for tablespaces with at least one datafile whose size is unlimited
[Informational]      Force Logging Disabled     Configuration     Database     When Data Guard Broker is being used, checks primary database for disabled force logging
[Informational]      Not Using Spfile     Configuration     Database     Checks for spfile not being used
[Informational]      Use of Non-Standard Initialization Parameters     Configuration     Database     Checks for use of non-standard initialization parameters
[Informational]      Flash Recovery Area Location Not Set     Configuration     Database     Checks for flash recovery area not set
[Informational]      Installation of JAccelerator (NCOMP)     Installation     Database     Checks for installation of JAccelerator (NCOMP) that improves Java Virtual Machine performance by running natively compiled (NCOMP) classes
[Informational]      Listener logging status     Security     Listener     Test for logging status of listener instances
[Informational]      Non-uniform Default Extent Size     Storage     Database     Checks for tablespaces with non-uniform default extent size
[Informational]      Not Using Undo Space Management     Storage     Database     Checks for undo space management not being used
[Informational]      Users with Permanent Tablespace as Temporary Tablespace     Storage     Database     Checks for users using a permanent tablespace as the temporary tablespace
[Informational]      Rollback in SYSTEM Tablespace     Storage     Database     Checks for rollback segments in SYSTEM tablespace
[Informational]      Non-System Data Segments in System Tablespaces     Storage     Database     Checks for data segments owned by non-system users located in tablespaces SYSTEM and SYSAUX
[Informational]      Users with System Tablespace as Default Tablespace     Storage     Database     Checks for non-system users using SYSTEM or SYSAUX as the default tablespace
[Informational]      Dictionary Managed Tablespaces     Storage     Database     Checks for dictionary managed tablespaces (other than SYSTEM and SYSAUX)
[Informational]      Tablespaces Containing Rollback and Data Segments     Storage     Database     Checks for tablespaces containing both rollback (other than SYSTEM) and data segments
[Informational]      Segments with Extent Growth Policy Violation     Storage     Database     Checks for segments in dictionary managed tablespaces (other than SYSTEM and SYSAUX) having irregular extent sizes and/or non-zero Percent Increase settings

Interresting is revoking UTL_FILE from public, which is critical. Also revoke UTL_TCP and UTL_SMTP. This is going to upset an expert I know...Okay, as this is (I think) aimed at me, I'll fall for it ;)
What is the point of revoking UTL_FILE from PUBLIC? Yes I know what you think the point is, but without rights on an Oracle DIRECTORY being able to execute UTL_FILE is useless. Unless of course you're still using the init.ora parameter
UTL_FILE_DIR=*which I sincerely hope you're not.
As for UTL_SMTP and UTL_TCP, I think whether a program is allowed to send e-mail to a given SMTP server is really in the remit of the e-mail adminstrator rather than the DBA.
Look, DBAs are kings of their realm and can set their own rules. The rest of us have to live with them. A couple of years ago I worked a project where I was not allowed access to the USER_DUMP_DEST directory. So every time I generated a TRC file I had to phone up the DBA and a couple of hours later I got an e-mail with an attachment. Secure yes, but not very productive when I was trying to debug a Row Level Security implementation.
I have worked on both sides of the DBA/Developer fence and I understand both sides of the argument. I think it is important for developers to document all the privileges necessary to make their app run. Maybe you don't have a better way of doing that than revoking privileges from PUBLIC. Or maybe you just want to generate additional communication with developers. That's fine. I know sometimes even DBAs get lonely.
Cheers, APC

What do you think of my Bash Script? What about the error checking?

Well what do you think of this Bash script
It works
I gave it some problems (i.e. unpluged the ethernet, messed up the URL's, uninstaled some programs...) to see if would report errors and stop or just keep going... But it did
I just kind of thought up a way to do some error checking with the commands that I know.....
What is a better way to do error checking?
What do you think I should add/Do to this script?
#!/bin/bash
# Shell script to make a USB Tumb Drive for Flashing BIOS on a Lenovo Ideapad Y510.
# This script needs to be owned and run as ROOT with the "sudo command"
# i.e. sudo usbbiosflasher
# If you have anyideas send me a PM on ubuntufourms.org my user name is HunterThomson
# Name/Rename this script usbbiosflasher and save it to the ~/home directory.
# Then run the command- chown root:root usbbiosflasher
# Then run the command- chmod 755 usbbiosflasher
# Then copy the script to the directory /usr/bin.
# Run this comand to do that- sudo cp ~/usbbiosflasher /usr/bin
# You also must have the program "mbr" installed
# You can install the mbr program by running this comand in the shell on Ubuntu
# sudo apt-get install mbr
# In Arch Linux you have to get it from Aur
# First you will need to know a few things...
# You will also need to know the Mount Point i.e. /media/disk and the /dev path i.e. /dev/sdb1.
# You can find these by using the df -T comand.
# Run df -T in the shell. Then plug in the USB Thumb Drive and run the df -T comand agin.
# The new listing is the USB Thumb Dirve.
# Also check to make sure the File System tipe is vFAT or FAT16 or FAT32.
# If it is not use gparted to format it to FAT32.
# I am farly certen that all USB Thumb drives come formated with FAT file system out of the BOX.
# You may want to fromat it anyway just to make sure.
echo "Interactive Shell Script to Make a USB Thumb Drive \for Flashing BIOS On a Lenovo Ideapad Y510"
echo ""
echo "You will need to have the program mbr installed"
echo "If you are on Ubuntu Linux you can retreve it form the repositories"
echo "If you are on Arch Linux you will need to get it from the Aur repository"
echo "Open anuther shell and \do that now..."
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
echo ""
# The next comand will make a directory to put needed files into. Note this file and everything init will be owned by root.
mkdir ~/usbbiosfiles && check1="yes"
if [ "$check1" = "yes" ]
then
echo "Made directory usbbiosfiles... OK"
else
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit
fi
# The next two comands will get the FreeDOS file and the .ROM file.
cd ~/usbbiosfiles && checka="yes"
if [ "$checka" = "yes" ]
then
echo "Changing to the usbbiosfiles directory... OK"
else
echo "Could not Change to the usbbiosfiles directory"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://www.fdos.org/bootdisks/autogen/FDOEM.144.gz" && check2="yes"
if [ "$check2" = "yes" ]
then
echo "Download of FreeDOS... OK"
else
echo "Could not Download FreeDOS"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://ubuntuforums.org/attachment.php?attachmentid=78460&d=1216648756" && check3="yes"
if [ "$check3" = "yes" ]
then
echo "Download of the BIOS.ROM \file... OK"
else
echo "Could not Downlad the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
# The next comand will name the .ROM file to the right name.
mv ~/usbbiosfiles/attachment.php?attachmentid=78460\&d=1216648756 ~/usbbiosfiles/06CN29WW.bios.update.tar.bz2 && check4="yes"
if [ "$check4" = "yes" ]
then
echo "Renameing of the BIOS.ROM \file... OK"
else
echo "Could not rename the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
echo ""
# The next two comands set the variables. DEVX for the path i.e. /dev/xxx and MOUNTX for the mount point i.e. /media/xxx
verify="n"
while [ "$verify" != y ]
do
echo "You will need to know the Mount Point and the dev Path. You will also need to \make sure the File System \type is vFAT, FAT16 or FAT32."
echo ""
echo "With the USB Thumb Drive unpluged, Open another shell and run the comand df -T Then plug \in the USB Thumb Drive and run the comand df -T one \more time. The new device listed is the USB Thumb Drive. Note the Mount Point and The dev Path and the File system Type i.e. vFAT... If the File System \type is not vFAT, FAT16 or FAT32 you will need to fromat it with gparted. You may want to format the USB Thumb Drive anyway just to \make sure. In any \case delete all files and directorys on the USB drive before you go any ferther with this program."
echo ""
printf "Enter the dev path the USB Thumb Drive is at?"
read DEVX
echo ""
echo "Are you sure $DEVX is the dev path of the USB Thumb Drive... y or n?"
read verify
done
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "What is the Mount Point of the USB Thumb Drive?"
read MOUNTX
echo ""
echo "Are you sure $MOUNTX is the Mount Point of the USB Drive... y or n?"
read verify
done
echo ""
install-mbr --enable A1 --partition 1 --force --timeout 0 $DEVX && check5="yes"
if [ "$check5" = "yes" ]
then
echo "Installing MBR on USB Thumb Dirve... OK"
else
echo "Could not install MBR on USB Thumb Drive"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
tar xjf ~/usbbiosfiles/*.tar.bz2 && check7="yes"
if [ "$check7" = "yes" ]
then
echo "Unpacking BIOS.ROM file... OK"
else
echo "Could not unpack BIOS.ROM file"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
gunzip ~/usbbiosfiles/FDOEM.144.gz && check8="yes"
if [ "$check8" = "yes" ]
then
echo "Unpacking FreeDOS files... OK"
else
echo "Could not unpack FreeDOS files"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mkdir ~/usbbiosfiles/fdoem144 && check9="yes"
if [ "$check9" = "yes" ]
then
echo "Made directory fdoem144 in direcoty usbbiosfiles... OK"
echo ""
echo "Going to \sleep \for 5secs"
else
echo "Could not make directory fdoem144 in usbbiosfiles directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
modprobe loop && sleep 5 && check0="yes"
if [ "$check0" = "yes" ]
then
echo "Modprobeing loop... OK"
else
echo "Could not \modprobe loop"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mount -o loop ~/usbbiosfiles/FDOEM.144 ~/usbbiosfiles/fdoem144 && check10="yes"
if [ "$check10" = "yes" ]
then
echo "Mounting FreeDOS on the fdoem144 directory... OK"
else
echo "Could not \mount FreeDOS on the fdoem144 directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/fdoem144/* $MOUNTX && check11="yes"
if [ "$check11" = "yes" ]
then
echo "Copying FreeDOS files to $MOUNTX... OK"
else
echo "Could not copy FreeDOS files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/*.ROM $MOUNTX && check12="yes"
if [ "$check12" = "yes" ]
then
echo "Copying BIOS.ROM files to $MOUNTX... OK"
else
echo "Could not copy BIOS.ROM files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
sync && check13="yes"
if [ "$check13" = "yes" ]
then
echo "Runing the syncing command... OK"
else
echo "Could not run the syncing command"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
umount ~/usbbiosfiles/fdoem144 && check14="yes"
if [ "$check14" = "yes" ]
then
echo "Unmounting of FreeDOS... OK"
else
echo "Could not unmount FreeDOS"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
fi
verify="n"
while [ "$verify" != y ]
do
printf "Do you see any errors... yes or no?"
read AN2
echo ""
printf "You answered... $AN2 to errors. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN2" == "yes" ]
then
echo "User Repoted... Error"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
else
echo "Success"
echo "I did a lot of error checking too and didnt find anything"
echo ""
echo "Go get a pen and paper to write down these instructions"
printf "Then hit the Enter to continue"
read WAIT
echo ""
echo "Now leave the USB Thumb Drive pluged into your computer and Reboot. When the Lenovo Logo POST screen appears hit F2 to enter the CMOS setup utility. Go over to BOOT tab and go down to HardDrive \(Not Boot Order) \then \select the USB Thumb Drive as the 1st hard drve. Then F10 and yes to save changes. Your compter will reboot agin. Then when the Lenovo Logo POST Screen appers on reboot hit F4 to enter the BIOS FLASHING program. The USB Thumb Drive will be seen as the C drive \in the list on the Left, Select it. Then \select the .ROM \file \in the list on the Right and start the BIOS FLASH. \(NOTE Your hart may stop beating... This is normal) Pray to any God you know of and your computer should restart just like normal. Hit F2 and the BIOS will now stay it is 06CN29WW. You will need to \set the boot order to the way you like it and other things \if you need to because they have been changed to the default."
fi
echo ""
echo "End of script"
Last edited by hunterthomson (2008-08-10 11:17:47)

Personally..... (this is just how I would have written it - if it works, then it's good enough for me though )
I would change this whole block:
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
To this much shorter code:
MBR='/usr/bin/install-mbr' # Or where ever you expect it to be
if [ ! -x $MBR ] ; then
echo "mbr doesn't appear to be installed."
echo "If it is installed, check it's location, make sure it's executable and then make sure the MBR variable in this script is correct"
exit 1
fi
I wouldn't have used the checkXX variables for each stage:
mkdir ~/usbbiosfiles
if [ $? != 0 ] ; then
#failed
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit 1
else
echo "Made directory usbbiosfiles... OK"
fi
There is an issue with the way you do your verifications - the user can never get out unless they answer 'y' or hit CTRL+C. Something like this gives them options:
verify="n"
while [ "$verify" != "y" && "$verify" != "n" ]; do
echo "You need to answer 'y'es or 'n'o"
read verify
echo $verify | tr "[:upper:]" "[:lower:]" # This converts the answer to lowercase so replies entered in upper case will still work
done
if [ $verify != 'y' ] ; then
exit 1
fi
One last thing I try to do in scripts... Declare all your binaries as variables at the start of the program, then execute the binary program by using the variable. For example:
# Binaries
TAR='/bin/tar'
CP='/bin/cp'
CHMOD='/bin/chmod'
# Execute tar and chmod the created file
$TAR cvzf /tmp/tarfile.tar.gz /etc/*.conf
$CHMOD 400 /etc/*.conf
This way, it's easy to change the path in future without having to hunt through the script if the paths change, and it also ensures you're calling the programs using the full paths to make sure you're not executing some strange variant or alias that someone has setup. If I use `chmod` 30 times in a script, and the path changes in the future or on a different system (`chmod` is a bad example cause it's highly unlikely to change, but you know what I mean), then all you need to do is update the variable at the start of the script, and it all works again without having to script-hunt and change it 30 times.

My IPhone all of a sudden pops up saying sim card failed. I turn it off and turn it back on and it works but the next day it happens again. what do you think is wrong with it?

My IPhone all of a sudden pops up saying sim card failed. I turn it off and turn it back on and it works but the next day it happens again. what do you think is wrong with it?

Hello brittbend
Check out the article to further troubleshoot your SIM card issues with your iPhone.
iPhone: Troubleshooting No SIM
http://support.apple.com/kb/TS4148
Regards,
-Norm G.

I have a question can you please add so the iphone also have 5 icon dock like the iPad have it would make my day easy as h..:) maby in the next update? What do you think?

I have a question can you please add so the iphone also have 5 icon dock like the iPad have it would make my day easy as h..:) maby in the next update? What do you think? What do everyone think?

I have a question can you please add so the iphone also have 5 icon dock like the iPad have it would make my day easy as h..:) maby in the next update? What do you think? What do everyone think?

My iPhone 6 panoramic camera does not work properly: the arrow does not turn when i turn my phone. Furthermore sonetti da my Keyboard does not turn as well. What do you think si the problem?

My iPhone 6 panoramic camera does not work properly: the arrow does not turn when i turn my phone. Furthermore sonetti da my Keyboard does not turn as well. What do you think si the problem?

Furthermore my keyboard does not turn sometimes as well

What do you think the best PS3 model is?

Similar Messages

Maybe you are looking for