What does a red airplay icon indicate?

Since upgrading to ios 6, when using airplay the icon is always red not blue, when playing from Music on my ipad3. The airplay is still functioning ok just wondering if there's a reason why it's red there and blue everywhere else?

Hey Chuck,
I had the same problem, and today I found a solution on an other forum that worked for me.
First you need to open the library folder for your user. The library is hidden in Lion, but you can open the folder by typing "open ~/Library/" in Terminal. Then go to 'Preferences' and delete the file 'com.apple.finder.plist'. Finally, type "killall Dock" in Terminal to restart Dock. I hope this will work for you as well.
Mikael

Similar Messages

  • What does the red dot next to the cfp icon under remote systems mean

    what does the red dot next to the cfp icon under remote systems mean

    Hi,
    This red dot is just to show you which fieldpoint controller is selected. You can change between controllers, and the red dot will move.
    Have a Great Day!
    George

  • HT4059 what does the red light and 'not in store' mean

    What does the red light in manage my books mean? And what does 'not in store mean'?

    Hello Simon,
    I believe you have two unrelated problems. The red light is only associated with the digital audio port and indicates the "mute" switch inside the jack that turns off the built-in speakers when phones are in use has jammed in the mute position. No way it should affect your ability to start the computer. That has to be something else.
    Does your computer give the normal startup chime sounds when you turn it on?
    If you are getting the normal startup chime and have a wired keyboard, boot while pressing the SHIFT key. Keep holding the SHIFT key until you get a desktop, then let go the key. At this point, do not try to do any work with the computer but rather see if it will restart normally (without holding any keys or key combos).

  • What does the red bubble mean that is near the phone symbol and moves over to the vm symbol when phone is turned on

    What does the red bubble mean that appears near the phone symbol then moves over temporarly to the VM symbol, when first turning the phone on.  It goes away with a few seconds

    It means you have no signal, or if on the VM icon, it means to visual voicemail.  Sounds like you're just getting it temporarily until the phone establishes a signal.

  • This is probably a stupid question, but what does the red circle with a number in it mean on iCal? It looks just like the emails notification. I do not have anything do or up in my cal.

    This is probably a stupid question, but what does the red circle with a number in it mean on iCal? It looks just like the emails notification. I do not have anything do or up in my cal.

    Actually, another person on the "more like this" had the right answer. It meant I had a notification for an invite that I needed to respond to.
    Hope this helps you as much as it helped me.
    D

  • What does a flashing folder icon with a "?" inside mean?

    What does a flashing folder icon with a "?" inside mean?

    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark or globe appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • What does it mean when icon bounces from dock

    what does it mean when icon bounces from dock

    If you mean that it bounces while in the Dock, it means that the application is launching. If that's not what you mean, please post back and describe your situation/question further.
    Regards.

  • What does the circled lock icon represent next to the battery meter?

    What does the circled lock icon represent.  It's located next to the battery meter.

    Page 12 and 13 of the iPhone user guide.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • What does the "color picker" icon look like?????

    I am a complete novice with Photoshop.
    What does the Color Picker icon look like in Photoshop CS4 and where do I find it?  Is this also called the 'Color sampler tool"?

    Double-click on your foreground color to bring up the Color Picker.
    Photoshop CS4
    Wo Tai Lao Le
    我太老了

  • What does mean the itune icon with a cable in the iphone screen?

    what does mean the itune icon with a cable in the iphone screen?

    I'm having exact same problem. I was installing the latest ios7 update (to fix some Facetime bug that I don't have) and this happened. I noticed in some other posts on similar problem to hold down the sleep and on buttons at the same time and tried that. No change. Then I plugged it into my laptop and it said it was in recovery mode. I'm now in the process of restoring the software.
    I really hope I haven't lost all my contacts, notes, and photos.

  • What does the red number mean?

    Airport Utility is displaying a red badge with the number 1 next to the icon for my Airport Extreme, which extends my network with an Airport Time Capsule. What does it mean? If it is indicating an update, shouldn't something happen when I click it? Clicking it opens up the inform balloon with an Edit button. But I see nothing inside the Edit to indicate what I am supposed to do.
    Thanks for the help,
    Van

    There is no Update button, just an Edit button.
    The message under the amber dot is:
    Extended Network
    This AirPort base station was unable to extend the wireless network. Make sure the wireless network you're trying to extend was set up and is working correctly, that you entered a matching wireless network password into this device, and that this device is in range of the wireless network.
    This base station was powered down a few days ago because I was having new carpet put in. The base station is back in its normal place within the house, where it worked perfectly before. I checked the password to the network it is extending, and it is correct. I have powered down the base station, then powered it up, and still the same result.
    Any other thoughts? What if I were simply to click Ignore?

  • What is the red speaker icon next to the battery indicator?

    Hi
    I some times have a red speaker icon next to my battery indicator even though i dont have any music playing or am having a conversation. It's some times white also. I have no idea what it stands for. does anyone know what its purpose is?
    thank you

    Page 17 of the iPhone user guide provides the iPhone's default status bar icons. This is not one of them.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • What does a blinking folder icon with a question mark mean when turning on computer?

    When I turn on my Mac Book Pro all I get is a blinking forder icon with a question mark in it in the middle of the screen. What does this mean and how can I fix it?

    Your Mac is not able to find a system folder to boot from so it displays the question mark.
    Allan

  • What does a broken battery icon on an iPhone used as an iTouch mean?

    I have an old iPhone 3G that is set up as an iTouch for my son to use.  It is not jailbroken, and was set up per the guidelines on Apple support.  It's been working fine for about 6 months.  Now when I charge the device, upon charging, an icon showing a cracked battery with green fluid leaking out shows on the display.  What does this mean?  Can I continue to use the device safely?

    You've been pranked.
    http://www.youtube.com/watch?v=s1ZW42-IRbU

  • What does a red light near front camera signify?

    My iPhone shows a tiny red light near its front camera, what does it mean when its on?

    The red light is the digital in light, that is how it reads the headphone jack. The reason the sound doesn't work is because a switch to turn the speakers back on is stuck (note that if you boot the computer, you will hear the startup tone).
    There are several ways to fix this...
    Some have found that putting the headphone plug in and out several times (maybe twisting it a little) will work.
    Others have used a toothpick to adjust the switch (I don't advise this because the toothpick may break).
    Instead of a toothpick, many have used a paperclip (probably best to use an insulated one). I couldn't get this to work, but I would suggest straightening, folding in half, then twisting the paperclip and moving it around in the port.
    You can also use a sewing pen/needle.
    I have seen all of these methods online, but they didn't work for me. I took a que from this instrucable and cleaned my jack with a dry q-tip. I then cut off most of the end and turned it around inside the port. This worked, but after I put the headphones back in the same problem came up, I just did the same procedure again and it worked again (even after I plugged the headphones back in and took them out).
    PS: I woud suggest putting some q-tips and possibly some scissors in your MacBook bag in case the problem arises on the move.

Maybe you are looking for

  • Photoshop cs4 crashing on saving and opening .pdf

    Each time i try to use photoshop cs4 to save a file as a pdf or open a pdf  the pinwheel will pop up and the programs will crash. I still use the cs3 nd it will do save the files as pdf with no problem.  I have a mac book pro 2.4 ghz processor with 2

  • Photoshop elements won't switch to the editor workspace from the organizer.

    I can't edit more than one photograph per session when using Photoshop Elements 10. When I first open up the organizer, I can select a photograph for editing and send it to the editing workspace. However, when I try to edit a second photograph in the

  • Why Are My Fonts and Imported Photos Pixelated in Photoshop?

    It is so strange. I worked on a Photoshop document earlier today. I imported a photo and wrote text on it. When I printed it, it came out perfect. Then I started a new document. I imported a photo which is 2400 pixels wide. The document size is only

  • Using Arrays in J2ME(Not getting any replies)

    Hi, Still i haven't got any reply for my messages........... pls hoping to get this time..............I wants to send a double array from a midlet to a web service ....I am using Sun's WTK2.2 Can anyone please tell me somethig regarding the support f

  • IDVD Multiple Disc Burning

    I created a movie in IMovie and put it into IDVD and went through the encoding process and it burned fine with no problems, but I wanted to burn several DVD's without closing it, but it did not give me the option of "would you like to burn another di