What does "Analyze audio for flex time editing" in Garage Band? It's taking so long(3 days)! and I can't shut down my pc.

Did you ever figure out what was going on? i've got the same issue.
I record 2 hour choir practices then edit the talking out to make more useful accompaniments for personal practice. During my editing process my MacBk Pro (0r GarageBand) decides it needs to "Analyzing audio for Flex Time Editing". It will finish doing it and immediately start over again. I can not cancel it so I just have to force quit Garageband and lose eveeryrthing I have editied since my last Save. I've shut my mac totally off and rebooted and to no avail. Any suggestions?

Similar Messages

HT1414 My Ipod Touch have a black screen when an app shut down and I can not shut down the Ipod. The screen is still black and I did the press two buttons solution and it doesn't work. What I have to do now?

My Ipod Touch have a black screen when an app shut down and I can not shut down the Ipod. The screen is still black and I did the press two buttons solution and it doesn't work. What I have to do now?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My update does'nt finish, and I can't shut down!

bought my n95 today, charged the battery for 10 hours, and then after talking to some friends decided to dowload the latest software.
Well, I did everything right. And suddenly my phone shut down, with fullcharged battery, and I just did as it said, and took out the battery, and pressed "retry",
and now the updating of the software has stopped. it's not updating!
I'm afraid to disconnect the cable, because the updates says that if I do do, my phone may stop working. And I can't shut down the update-window.. PLESE HELP ME SOMEONE? I just don't have time to bring my new phone in for service, so it HAS TO WORK! heeeeelp, PLEASE?
/Alexandra

Hi xcarmen
Unfortunately that is just the worst time to get "phone recovery" message and it is highly likely that you will now have to visit a Nokia Care Point to have the software re-installed. Once the USB connection has been broken, Nokia Software Updater fails to recognize the attached device.
I am not saying that it would have made the slightest difference here, but you are advised in FAQ to NSU to plug-in mains charger when updating phone software.
Happy to have helped forum in a small way with a Support Ratio = 37.0

An app is being copied for 2 days and I can`t delete. What can I do?

I try to download Skype while at the same time the computer was trying to cancel something (moving the App icon to the dock) Both freezed and I can`t shut down the computer. This has been going on for 2 days and my MacBokk Air is new. I bought it 2 days ago. I need help.
Thanks

Press down on the power button until it shuts down.
Once your Macbook Air turns off - press the power button to turn it back on.

Flex time editing

Should I bounce each flex time track edit before performing flex time editing on other tracks?

welshwiggle wrote:
I tap in a manual click for the whole song, beatmap it and it works great.
Then , I foolishly think to myself, I'll just 'tighten up' the drums and bass a little using FutzTime and........DISASTER.
Anyone since Feb 2011 actually got Flex to work well in this way?
Hi,
I don't think there's a need to add a manual click to make this work. Just do the beat mapping before you do anything else (no Flex active, no tempo changes added to the files from previous attempts of making this work etc).
For simplicty, please try this with only one track:
Record something without a click in an empty song.
Use Beat Mapping to make the grid match the audio, and BIP (Bounce-In-Place) that file.
Now, try to correct the hits that ar still out of time, using Flex and either the quantize function or manually edit the regions.
If this doesn't work as expected, what exactly goes wrong?
Note that if you totally beat map the region (every note in the region) befor eyou quantize, quantie won't do anyhting, because all the notes atcually already match the grid - as a result of the beat mapping.
If you explain actually what you want to do - and what goes wrong, it will be easier to help you out.
ETA - the reason I don't think adding a manually played click before you start the quantizing process is a good idea is that such a click rack will add small timing changes. As a result of this, Logic will, when quantizing, try to move a lot of notes to your click ven if they were perfectly fine, simply because your click positions aren't identical to the original note positions.
Message was edited by: ZXC

What does JV stands for

Hello,
Please let me know what does JV stands for.The Excise JV which we create using the transaction code : J1IS and J1IH.
When we should use J1IS and J1IV.Bcz both are used for creating Excise Invoice.
From
Shikha

CENVAT Adjustment Postings (J1IH u2013 Excise JV)
Use: - You use these functions if you need to make an adjustment posting to any of your CENVAT accounts. You can make adjustment postings to account for:
u2022Scrap
u2022 Materials that you have not used in production
u2022 Additional excise paid by vendors
u2022 Money that you have transferred to your personal ledger account
u2022 Other transactions
You can also use this function to cancel excise invoices.
Features: - Each of the different types of adjustment postings are documented separately. However, they all work on the same principle, as follows.
Reference Document: - On the initial screen of the transaction, you specify the reference document, that is, the document which the adjustment posting is to refer to u2013 either an internal document, such as a material document or a subcontracting challan u2013 or an external document, such as an incoming excise invoice
You also specify which registers are affected by the posting. In many cases, the adjustment will have to be remitted to the authorities on a fortnightly basis. The adjustment will then be included when you run the Remittance of Excise Duty Fortnightly report. If the adjustment has to be remitted immediately, you specify which register is affected.
Excise Details: - When you proceed to the detail screen, the system automatically shows the line items from the reference document, if it is an internal document. You specify how much excise duty is to be adjusted and which CENVAT accounts the adjustment posting is to be made to.
When you edit the excise details, there are a number of functions that are available, depending on the type of adjustment posting:
u2022 Assigning excise invoice to line items
u2022 Specifying which G/L accounts are to be adjusted
u2022 Displaying balances of CENVAT accounts
When you save your changes, the system creates an accounting document to make the appropriate postings.
1. Making Adjustment Postings for Scrap
Use: - You follow this procedure if you have scrapped a material and want to reverse the excise duty debited to your CENVAT account.
Procedure: -
1. J1IH - Excise JV ? Create ? Matl write-off.
2. Enter data as required, including:
u2022 Document number (This Document is of Movement Type u2013 551 i.e. GI for Scrap)
Enter the number of the document that you used to scrap the material.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. If the posting does not have to be remitted immediately, select Fortnightly payment.
3. Click on u201CEnteru201D button.
The system displays the information from the material document.
4. Adjust the posting date as necessary.
5. Adjust the excise duty for each line item either:
u2022 Manually
u2022 By assigning the line item to an excise invoice
6. Specify which G/L accounts are to be posted to.
Here you can change Debit A/c as per your requirement.
7. Save the adjustment posting.
System will post Excise JV Document, Accounting Document Part2 Serial No.
2. Making Adjustment Postings for Materials Not Used in Production
Use: - You follow this procedure if you have not used a material in the production process and want to reverse the excise duty debited to your CENVAT account.
Procedure: -
1. J1IH ? Excise JV ? Create ? Matl non-prod.
2. Enter data as required, including:
u2022 Document number
Enter the number of the material document that the adjustment posting is to refer to.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. If the posting does not have to be remitted immediately, select Fortnightly payment.
3. Click on u201CEnteru201D button.
The system displays the information from the material document.
4. Adjust the posting date as necessary.
5. Adjust the excise duty for each line item either:
u2022 Manually
u2022 By assigning the line item to an excise invoice
6. Specify which G/L accounts are to be posted to.
Here you can change Debit A/c as per your requirement.
7. Save the adjustment posting.
Excise JV Document, Accounting Document with Part2 Serial No has been successfully created
3. Making Adjustment Postings for Additional Excise Paid by Vendors
Use: - You follow this procedure if a vendor has increased the amount of excise duty that it originally charged you and you want to debit the difference to your CENVAT account.
Procedure: -
1. J1IH ? Excise JV ? Additional excise.
2. Enter data as required.
In the Document number field, enter then number of the document sent to you by the vendor.
3. Click on u201CEnteru201D button.
4. Adjust the posting date as necessary and Enter Vendor Name.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here Enter Material code, quantity as per excise invoice, reference document (i.e. GRN Document), batch no., BED and Ed Cess Amount to be posted.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. If the duty qualifies as countervailing duty (CVD):
a. Select CVD applicable.
b. Enter the CVD amount in the BED amount field.
7. Specify which G/L accounts are to be posted to.
8. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
4. Making Adjustment Postings for Money Transferred to PLA
Use: - You follow this procedure to make an adjustment posting when you transfer money to your personal ledger account (PLA).
Prerequisites: - You have already transferred the money to your PLA at the bank, using a TR6 challan, and have posted the corresponding accounting document.
Procedure: -
1. J1IH ? Excise JV ? TR6 challan.
2. Enter data as required, including the document number.
You can enter either the challan number OR the number of the accounting document (This document is to be first created through T. Code u2013 FB50. In this Document Debit PLA on Hold A/c and Credit Bank A/c with the Amount to be transferred in PLA CENVAT Accounts)
3. Click on u201CEnteru201D button.
If you entered the accounting document number, the system displays the information from it.
4. Enter the amounts against the accounts that you require.
5. Save the adjustment posting.
6. System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
5. Canceling Excise Invoices
Use: - You follow this procedure in order to cancel an outgoing excise invoice. It reverses any excise duty accounted for.
Procedure: -
1. J1IH ? Excise JV ? Cancel exc. inv.
2. Enter the number, year, and series group of the excise invoice that you want to cancel.
A dialog box appears.
3. Choose Yes.
4. Before posting the document check the Accounting document going to be generated.
Here click on u201CDetermine G/L Accountsu201D button.
5. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
6. Making Adjustment Postings for Other Transactions
Use: - You follow this procedure if you want to make an adjustment posting that does not fall into any of the other categories of adjustment offered by this function. You can only use an external document as your reference document.
Procedure: -
1. J1IH ? Excise JV ? Other adj.
2. Enter data as required, including:
u2022 Document number
Enter the number of the external document that you want to refer to.
u2022 CENVAT account selection group box
Specify which account is affected by the adjustment posting is for. If the posting does not have to be remitted immediately, select Fortnightly payment.
3. Click on u201CEnteru201D button.
The system displays the information from the material document.
4. Adjust the posting date as necessary and enter Vendor code as per requirement.
5. Enter the amount of excise duty in either of the following ways:
u2022 To enter line items for different materials and the excise duty accordingly, choose u201CDetailsu201D button and enter the line items in the table.
Here fill details like Material Code, Quantity as per Excise Invoice, Batch No, Reference (i.e. GRN Document), BED and Ed Cess Amount manually.
If you want system to propose the BED and Ed Cess Amount, Click on u201CGet Excise Invoiceu201D button and select the proper Excise Invoice from which the proportionate amount is to be copied.
Select the u201CExcise Invoiceu201D and click on u201CContinueu201D button.
It will copy BED and Ed Cess and SECess amount as per the quantity mentioned here. It will be proposed in proportion of selected Excise Invoice quantity and value.
u2022 To enter the excise duty only, choose u201CHeaderu201D button and enter the excise duty in the totals fields at the foot of the screen.
6. Specify which G/L accounts are to be posted to.
7. Save the adjustment posting.
System will post Excise JV Document; Accounting Document with Part2 Serial No has been successfully created.
TIPS to simplify Excise JV transactions: - (J1IH)
1. Assigning Excise Invoices to Line Items
Use: - When you make an adjustment posting, you follow this procedure if you want to specify the original excise invoice associated with a line item.
Procedure: -
1. Select the line item that you want and choose Get excise invoice.
The system displays a list of all the excise invoices that you have posted from this vendor for this particular material.
2. Select the excise invoice that you want and click on u201CEnteru201D button.
The system:
u2022 Enters the excise invoice document number in the Ref. doc. field (Reference document).
u2022 Calculates how much of the excise duty from the excise invoice should be apportioned to the line item and enters it in the excise duty fields.
If you then overwrite these amounts, you should also overwrite the reference document number with an explanatory text, since there is no point in maintaining the link to the reference document anymore.
For e.g. you have a line item with ten plates of glass that you have broken and are to be scrapped. You have three excise invoices from the same vendor to choose from. You pick one for 20 plates of glass with BED at INR 200. The system automatically apportions INR 100 to the line item that is to be reversed.
2. Specifying Which CENVAT Accounts to Adjust
Use: - When you make an adjustment posting, you have to specify which CENVAT accounts are to be adjusted.
Procedure: -
1. Choose Determine G/L accounts.
A dialog box appears that shows how much will be posted to which G/L accounts. The accounts that are displayed depend on the excise group and the CENVAT account that you entered on the selection screen.
2. Add another account, if you need to, and adjust the other postings so that the credits and debits match.
3. Enter a business area and cost center, if necessary.
4. To close the dialog box, click on u201CEnteru201D button.
3. Displaying CENVAT Account Balances
To display the balances of your CENVAT accounts, choose Balances.
The system displays the balances only of the CENVAT accounts that are affected by your G/L postings.
J1IS - Excise Invoice for Other Movements
You use this transaction to create Outgoing Excise Invoice for Vendor Return using ref. doc. type "MATD" (Material Doc - 122 Movement Type).
And Print the same in J1IV
Excise post & print for others mvmts (J1IV)
This is used to post the Excise documents of other movements (For e.g. Excise Invoice for Vendor Return) to FI and also used to take printout of the same.
Here In selection screen, enter Internal Doc of Excise doc and year then click Goto > Releaee to Accounting and also you can print using Goto > Print document.

What does FND stands for?

In oracle application there is a schema FND. What does it stands for or it's descriptive meaning? Thanks.

hi warren,
FND stands for foundation tables which is combination of AOL SYSTEM ADMINISTRATOR MODULES tables will be placed under this FND_TOP
This module is a standard and any customization may some time leads to distruction of the Oracle Applications.
With Regards,
Narendra

What does ESA stands for ? and where it is use

Hi,
What does ESA stands for ? and where it is use ?
Thanx

Hi
ESA is enterprise Service Oriented Architecture.
This is a new strategic direction in which SAP AG is planning to take all industries to. They have developed SAP Netweaver for this. SAP as such is a great application but JAVA is very user friendly. In past integration of web applications was not so good with SAP.
With SAP Netweaver ABAP and JAVA gets integrated great and hence we have seamless integration between SAP and webapplicaation. This also helps to give great USER interfae with real time information search on web from SAP.
e.g. tracking information of sales order, invoice etc from web from SAP.
If helpful, reward accordingly.
Kind Regards
Sandeep

What does enter password for what does cardDAV account "yahoo" mean on ipad 2

what does enter password for cardDAV account "yahoo" mean on ipad 2

I'm having exactly the same problem. I saw no further responses and am wondering if you resolved this. Just bought the newest iPad. I'm a comfortable user as I'm on my 3rd iPad. Never seen this asked of me. Incidentally I am also trying to resolve why I "can't connect to apple store". For that I have reset "network settings" & forgotten my wireless network. I'm starting to wonder if the CArdDAV and "can't connect to the apple store are related. I can reach the Internet via Mail & Safari. I have a weak g3 connection. Not able to download anything via that as it's slow right now. I am trying to restore my apps after a theft of my old one. I have quite a few apps I need to download and I can make none of them happen. And every time I reboot the "cardDAV password" request comes up, repeatedly.

HT201471 What does MM stand for in the ipad mini and ipad 4th gen description (wifi+cellular) ?

What does MM stand for in the ipad mini and ipad 4th gen description (wifi+cellular) ?

I think it must stand for "made of money" because this 4th generation ipad model 1460 is the most expensive.

The audo files do not play from websites instead ask for download. This has occured from the time I have updated Firefox 4 to Firefox 5. Why? And how can i play audio files?

The audo files do not play from websites instead ask for download. This has occured from the time I have updated Firefox 4 to Firefox 5. Why? And how can i play audio files from websites?

You have a <b>general.useragent.override</b> pref that identifies you as Firefox/3.5.7
*Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.7) Gecko/20091221 Firefox/3.5.7 (.NET CLR 3.5.30729)
See:
*https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
*http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

Somehow i have genius, and often a song will not play because it isn't on my genius playlist. tried adding it and it won't add.. do i need genius? what does it do for me?

often i try and play a song and the genius menu comes up and stops me. do i need genius? what does it do for me? one favorite song is not on the genius playlist, and they won't add it. it is a big bother, actually

What do you mean it comes up and stops you?
No you don't need Genius. If it's just an extra feature of the device.
Looking for a bit more detail as to what is happening and what you are doing to make it happen.
B-rock

When I plug my phone on itunes, there's a "toolbar" at the bottom that shows me what is in my phone ie: music, picture, apps... what does "other" stand for ??

When I plug my phone on itunes, there's a "toolbar" at the bottom that shows me what is in my phone ie: music, picture, apps... what does "other" stand for ??

https://discussions.apple.com/message/20762105#20762105
and see to right "more like this "

What is the IDOC for Inspection Lot Edit

Hi All,
What is the IDOC for Inspection Lot Edit and Cancellation in QM module?
Thx&regards,
Khaja.

Check these..
in TCode: we30
->INSPECTIONPLAN_CREATE01
->MATQM01
->QPMK01
Regards,
Ramesh.

What does Verizon charge for dry loop in NYC?

Right now I have dsl with a land line. I want to drop the land line and go with dry loop. What does Verizon charge for dry loop in NYC?
Thanks

look at the 3rd column under No Verizon home phone on this link: http://www22.verizon.com/Residential/HighSpeedInternet/Plans/Plans.htm

What does "Analyze audio for flex time editing" in Garage Band? It's taking so long(3 days)! and I can't shut down my pc.

Similar Messages

Maybe you are looking for