What does bad argument 0x10000003 mean on macbook pro
what does bad argument 0x10000003 mean on macbook pro during boot up after a question mark folder appearing?
At that point, I had taken one of the DIMs out to see if the RAM was the issue. I took it to the Apple Store and they said that the hard drive might be bad, so they wiped everything on the hard drive. After that, I was still experiencing the kernel panics. So another guy looked at it and said that it might be bad RAM. So I called the company and got them to send me more RAM and after inserting the new RAM, I still get kernel panics. I've been saving all the panic reports in a folder on my flash drive. Today I got a total of four. And then I got four the day before that. Mind you, this didn't start happening until I upgraded my system to Mavericks.
I really wish there was a way I could post them all so someone could look at them, cause to be honest, none of the code in it makes any sense to me.
Similar Messages
-
What does apple say about maintaining a macbook pro?
Where can I find apple's maintenance advice on caring for a macbook pro? I would like honest advice about how to get my laptop running fast again. I would also like to know what the facts are about permissions and why I have 5 that will not remain repaired despite the utility telling me they are repaired but further verification shows they are still not correct or have been undone. If anyone could send me a link to a good website that is not trying to sell me third party software that would be really appreciated. Also, if anyone has information on why laptops slow down in general that would be helpful.
Lastly, if anyone can solve my reoccuring permission annoyance I would be very appreciative:
Verifying permissions for “Macintosh HD”
Permissions differ on “Applications/iTunes.app/Contents/Frameworks/iPodUpdater.framework/iPodUpdater” ; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “Applications/Utilities/Podcast Publisher.app/Contents/Frameworks/Cocktail.framework/Cocktail”; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “Applications/Utilities/Podcast Publisher.app/Contents/Frameworks/EPUB.framework/EPUB”; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “Applications/Utilities/Podcast Publisher.app/Contents/Frameworks/PodcastProducer.framework/PodcastProducer”; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/DUSupport”; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Permissions verification complete
Repairing permissions for “Macintosh HD”
Permissions differ on “Applications/iTunes.app/Contents/Frameworks/iPodUpdater.framework/iPodUpdater” ; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Repaired “Applications/iTunes.app/Contents/Frameworks/iPodUpdater.framework/iPodUpdater”
Permissions differ on “Applications/Utilities/Podcast Publisher.app/Contents/Frameworks/Cocktail.framework/Cocktail”; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Repaired “Applications/Utilities/Podcast Publisher.app/Contents/Frameworks/Cocktail.framework/Cocktail”
Permissions differ on “Applications/Utilities/Podcast Publisher.app/Contents/Frameworks/EPUB.framework/EPUB”; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Repaired “Applications/Utilities/Podcast Publisher.app/Contents/Frameworks/EPUB.framework/EPUB”
Permissions differ on “Applications/Utilities/Podcast Publisher.app/Contents/Frameworks/PodcastProducer.framework/PodcastProducer”; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Repaired “Applications/Utilities/Podcast Publisher.app/Contents/Frameworks/PodcastProducer.framework/PodcastProducer”
Permissions differ on “Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/DUSupport”; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Repaired “Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/DUSupport”
Permissions repair complete
Verifying permissions for “Macintosh HD”
Permissions differ on “Applications/iTunes.app/Contents/Frameworks/iPodUpdater.framework/iPodUpdater” ; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “Applications/Utilities/Podcast Publisher.app/Contents/Frameworks/Cocktail.framework/Cocktail”; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “Applications/Utilities/Podcast Publisher.app/Contents/Frameworks/EPUB.framework/EPUB”; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “Applications/Utilities/Podcast Publisher.app/Contents/Frameworks/PodcastProducer.framework/PodcastProducer”; should be lrwxr-xr-x ; they are -rwxr-xr-x .
Permissions differ on “Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/DUSupport”; should be lrwxr-xr-x ; they are -rwxr-xr-x .You can ignore these messages. Apple says so.
Mac OS X: "Disk Utility's Repair Disk Permissions messages that you can safely ignore"
http://support.apple.com/kb/ts1448
If your Mac runs slowly
http://support.apple.com/kb/PH3915
Best. -
what does doa cover. i mean i brought a macbook 6 days back and it uses to restart when its powerd off nd lid closed it has kinda defective power key also. can it be treated as doa
DOA means different things to different manufacturers. For some DOA means it fails to work out of the box and will be replaced but if it worked out of the box and failed the next day it will be repaired. For other companies there is a liberal return policy - for Apple if you buy direct from Apple (online or an Apple store) you have 14 days to return. That means you can return a defective computer and then turn around and buy a new one.
(I had a store manager try to get me to accept a repair on a computer with a bad keyboard out of the box. I refused and insisted on a full refund if she wasn't willing to replaced it.) -
What does checking mail manually mean on a macbook air?
what does checking mail manually mean on a macbook air, how is it done?
In Mail's preferences click on the General icon in the toolbar. Here you can set Mail to automatically check for mail Manually.
Then to check for mail you would have to click on the Get Mail icon in the mail browser window:
which is the icon that looks like an envelope. -
What does this error message mean? (link to picture)
My MacBook has been not working very well this morning, so I did the verify disk thing and it returned the message that something was corrupt and I had to start up from the Mac OS X installation DVD and repair the disk. What does the message here mean?
OK, I'll try: it means that there's a missing directory record; that is, there's an item in the directory pointing to a record that doesn't exist. What else can I tell you? All such errors need repairing.
-
What does rendering error -50 mean? I'm trying to export to apple device from FC Pro
What does "rendering error -50" mean? I'm trying to export to an apple device (Itunes) and I've done it this way before but now I just get the error message. I'm not very technically savvy.
I had a bunch of video clips which I took on a point and shoot camera. They had been uploaded along with photos to Aperture, but putting the SD card directly into my computer. Every year I take all the clips, edit out the junk, and make a DVD for the kids and grandkids to enjoy. When in final cut, I just clicked on the camera to import from Aperture.
I also make DVD's though out the year of special events, using these same type of video clips taken with the point and shoot. I sometimes do slow motion set to music, etc. I have not had a problem before. And all the bad files came from one trip in October. All the files after it were fine as well. I'm not sure what I did differently for that trip.
The little video clips say DSCN1783 (or some other file number) and are 1920x1080. I try to "share" my project to a Master File on an external drive. -
HT204323 what does the padlock icon mean
What does the padlock symbol mean when i try to start my macbook
It means the open firmware password is set. Please use this tip to find out where to post in the future:
http://discussions.apple.com/docs/DOC-2463 -
What does error code 3149 mean?
what does error code 3149 mean on i pod touch
Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?
Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
Product and Software: This article applies to AP-105.
The root cause of this error is that the AP cannot perform a code upgrade.
Scenario 1
Check the ArubaOS code.
The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
Scenario 2
If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
Scenario 3
The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
apboot> setenv ipaddr <ip address>
apboot> setenv netmask <netmask>
apboot> setenv gatewayip <ip address of the gateway>
apboot> setenv master <ip address of the master>
apboot> setenv serverip <ip address of the TFTP server>
apboot> setenv bootcmd tftp
apboot> save
apboot> boot
Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
Built: 2011-01-07 at 13:42:04Model: AP-10x
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0xffffffff
eth0 up: 1 Gb/s full duplex
DHCP broadcast 1
DHCP IP address: 192.168.x.xx
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.x.xx
DHCP DNS server: 192.168.x.xx
DHCP DNS domain: xx
ADP multicast 1
ADP broadcast 1
ADP multicast 2
checksum bad
ADP broadcast 2
checksum bad
ADP multicast 3
checksum bad
checksum bad
checksum badRetry count exceeded
DNS request 1 for aruba-master to 192.168.x.xx
checksum bad
checksum bad
checksum bad
T Using eth0 device
TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: checksum bad
T T checksum bad
T checksum bad
checksum bad
checksum bad
T checksum bad
checksum bad
T T checksum bad
T checksum bad
checksum bad
T T T
Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum badARP Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplexchecksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad ThanKs :)
-
I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???
If your iPhone is locked to a wireless provider, only that wireless provider
can unlock it. Contact the wireless provider in Hong Kong to see if they
offer unlocking and if you qualify.
If your iPhone is locked to an AppleID that you do not know, return it for
a refund as it is useless. Only the person whose AppleID was used for
activation can remove the lock. There is no workaround for Activation Lock.
If neither of the above is what you are facing, provide more detail so someone
may offer a solution. -
I was playing with my ipad settings and noted in he advanced settings of Safari there was a place to view "website databases". When I selected this I saw a multitude of websites.
Can anyone tell me how these get there? Can a website be posted even if it was never went to? What does the space amount mean? For example, 1.5 kb...is this quite a bit? Would it indicate someone has gone to a site multiple times?
I share my ipad with my teenage daughter and I'm trying to find out if she's lying to me. Obviously she's swearing that she has "no idea" how these got there and I'm trying to keep her safe (she's only 14).
Thanks everyone.
Concerned MomThink of your PC and the 'temporary internet folder' where it keeps cached copies of web pages or elements off a web page for 'quicker display the next time you visit'. That's pretty much what that folder is. 1.5K is tiny. Probably just a basic page with some text on it. (you might be confusing 1.5K with 1.5 megabyte....megabyte is large...it's roughly 1000 kilobytes, so the 1.5K is a tiny file)
As far as I know, the only way info gets into that folder is if the browser has been to that site.
if you have a concern there are browsers out there, McGruff is one i've seen recommended, that allow some degree of parental control and supervision. That or you could passcode lock the iPad or enable the restrictions to turn off some parts of the device to have some control. -
I can see my images in the libarary as thumbnails but when i try to edit/email some of them become Exclamation Marks in a triangle.
What does the exclamation mark mean and how to i retrieve the photoThe exclamation make is an indication that iPhoto has broken the file path to the original photo.
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
What does (error code -600) mean?
What does (error code -600) mean?
I received this code in a pop up window while trying to open iTunes from my Apps folder.procNotFound
= -600, /*no eligible process with specified descriptor*/
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Any change? -
What does "extracted channel PDF" mean and why does it continually duplicate on my desktop? I think it happens when I move a file in Finder to another file and when I copy some web files. I have to immediately move to trash all the duplications on my desktop. How do I avoid this on my Mac (Mavericks)? Thanks for your help!
What application is set to open PDF files? If you CNTRL click on the file and open with Preview does the problem occur?
If not change the default application to open PDF files to Preview.
You can do this by highlighting the file and either use CMD i or Get Info , this will open a window with the info on the file with an option to change the application that opens the file.
That's all I can think of. -
I understand that when using Numbers/Pages - an up-arrow on a document means that the file is still to be uploaded to the cloud, what does a down arrow mean? It seems the document can't be accessed until the arrow clears.
I believe what it's supposed to mean is that some changes were made to the document on another device, and those changes were saved back to the cloud. Now you've opened iWork on a different device to access that document - it compares the document you've got locally with the one in the could, sees some recent changes and downloads them.
What gets me is why this sometimes happens even when I've not made any changes to a document from another device.
Maybe you are looking for
-
Why don't all my iTunes Library songs show up in my music folder
I have a lot of music in iTunes (16,000 plus songs) and they are stored on a LaCie external hard drive. Just recently I discovered that when I click on the file folder where all the music is stored, only files starting with A through B are listed. I
-
I have a DAQ Assistant configured to read 2 channels at the same time. When I wire a graph indicator to the output, I see the 2 signals jumbled together. How do I split them up into seperate signals? When I wire any type of indicator it is showing ju
-
Two cRIOs with the same code in 1 project
I have a project that contains two cRIOs that run the same exact program. The only difference is the IP address in the ni-rt.ini file. I would like to create a project that represents the actual targets but uses the same vis. In doing this I found
-
The appraisal pages error out when I apply my VO substitution
Hi All We are in the process of performing an upgrade from 11i to R12.1.3. In the 11i instance, Appraisal VO (/oracle/apps/per/selfservice/appraisals/server/AppraisalVO) was substituted to add one more entry in the select clause. As part of R12, this
-
Display software execution in portlet...
Does anyone know of a way to execute or display execution of a third party piece of software in a portlet? thanks Alex