What does "BookMark" mean in Query menu

Hi,
When we run a query, the right click menu has a lot of options, ex: drill down according to , Query Properties, etc along with "BookMark". What does it do? i tried to play with it, but coldn't figure out.
Thanks guys.

Essentially it takes all the navigation steps that a user has performed (drilldowns, swapping columns, etc.) to format their report the way they want. When you choose the standard BOOKMARK command, it stores this report state internally in BW under a BOOKMARK_ID and the URL changes to reference this. For example, it may look like:
http://test.company.com:8080/sap/bw/BEx?SAP-LANGUAGE=E&BOOKMARK_ID=239XO3EZZ3MBX141CD6W5SBSB
This URL can now be used at a later point to refer to the user's saved state. With the standard functionality, a user could just save this as a browser Favorite & access it there when they chose. It is a good way for them to personalize a delivered report to their liking without affecting the original. As mentioned here recently, there was a BW Expert earlier in the year explaining how to expand on this.
Thanks, Jody

Similar Messages

What does it mean when the dialogue box that pops up when you want to bookmark a site says " Remove 3 bookmarks?"

Using Firefox 17.0. When I click on "Bookmark a Page" under the star in the dialogue box that appears it may say "Remove Bookmark" or "Remove 3 bookmarks." What does it mean - will it really remove three bookmarks?

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

HT3782 What does it mean "Battery Health" Check battery in the battery menu bar?

What does it mean "Battery Health" Check battery in the battery menu bar?

Check the full status by going to the apple in the left side of the menu bar, About This Mac, More Info, System Report, Hardware, Power and see what it says about the Cycle count, Battery Condition, Battery Capacisty, charge remaining.
Condition should be Normal or there is a problem
Ratio of charge remaining to cpacity should be close, round off, to the reported battery charge percentage.
Cycle count tells how many charge cycles the battery has been through, typical lifetime cycle count for a current generation battery is 1,000 cycles.

In iBooks,what does it mean when it says: you have already purchased this item. To download it check available downloads in the store menu?

In iBooks,what does it mean when it says: you have already purchased this item. To download it check available downloads in the store menu?

Apologies if I seem rude but isn't it obvious?
you have already purchased this item means you have already purchased this item - you don't need to buy it, you've already bought it.
To download it check available downloads in the store menu means to download it check available downloads in the store menu. So if you look at your top menu bar (in your iTunes programme) select the Store and from the menu that appears, select Check for available downloads. My guess (and I realise I'm risking my reputation here ) is that when you click on that, you will see a list of the items you've bought which will include anything you haven't yet downloaded to your iTunes. I assume there will be an option with that list to download those items.
I would like to thank the person who thought of the idea of taking different words and putting them in a certain order, so that those words form a sentence, and that sentence can then be read by other people and those people understand. Genius!

My Apple TV states in general menu "Activation: failed". What does that mean and how can I solve the problem?

My Apple TV states in general menu "Activation: failed". What does that mean and how can I solve the problem?

Hello MichaMuc,
I found some steps to help resolve the "Activation: failed" error messsage you are getting on your Apple TV:
Restart your base station or router. Sometimes this is done by turning the router off for a few seconds, and then on again, but check the documentation provided by the manufacturer.
To restart your Apple TV, press and hold Menu and Menu down/scroll ( - ) for about 6 seconds and then choose Restart from the menu.
If the issue continues after restarting, reset your router or base station and Apple TV to factory settings
Reset your base station or router. Use the documentation provided by the manufacturer to reset to factory settings.
To reset your Apple TV perform a factory restore.
You can find the full article here:
Apple TV: Troubleshooting wireless connections
http://support.apple.com/kb/ht1595
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

HT4993 there is an icon in my menu bar with a lock with a continuous circle around it - what does this mean

there is an icon with a lock with a continuous circle around it - what does this mean

It means you have enabled rotation lock, so the screen will not change from portrait to landscape when you rotate the phone.
Double-press the HOME button, then slide the QuickLaunch ribbon from left to right to reveal the lock control icon.

What does it mean when I get "there was an error in the App Store. Please try again later. (4)"?

What does it mean when I get “there was an error in the App Store. Please try again later. (4)”?

Sign out of the Mac App Store via the Store menu
Quit the Mac App Store
Log out of your Mac OS X user account (from the Apple menu)
Log back in to your user account
Launch the Mac App Store, sign in, and try downloading again
You should be able to download any app trouble free now. If you still have problems, reboot your Mac.

I just downloaded itunes onto my new laptop and I am trying to burn songs onto a cd that I had purchased previously and I am getting an error message that states I must authorize this computer. What does that mean?

I just downloaded itunes onto my new laptop and I am trying to burn songs onto a cd that I had purchased previously and I am getting an error message that states I must authorize this computer. What does that mean?

If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
(95452)

Images have ? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?

Q - My images have a
? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
A - The
? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
Click the
? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
As you'll quickly realise, clicking the
? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
On the Mac you should
Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
Choose button and allow Lightroom to do its stuff.
The method described above also applies to the PC version although the dialog is called
Browse for Folder and the
Choose button is replaced by
OK.
You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
A tutorial demonstrating above can be found
Here

Q - My images have a
? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
A - The
? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
Click the
? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
As you'll quickly realise, clicking the
? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
On the Mac you should
Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
Choose button and allow Lightroom to do its stuff.
The method described above also applies to the PC version although the dialog is called
Browse for Folder and the
Choose button is replaced by
OK.
You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
A tutorial demonstrating above can be found
Here

If Logical level mappings are blank in an LTS , what does it mean?

Hi All,
I was trying to find this out in the forum but couldn't.
In my LTS, on the content tab, if i don't specify any "Aggregation, group by" information for the dims associated with my Fact table and keep it blank, then what does it mean? Would OBIEE treat this as at the detail level by default? So to test this, I created a logical fact and for its LTS, i didn't associate any logical level for dimensions. The query didn't give me any error and worked fine by using the correct join details.
Also when do we associate an LTS with the Total Level for a dim, what's the use because as I understand, this means all our measures from that LTS would be calculated for the total level of the dim and we can do this by creating level based measure and associating it with the total level of the dim.
I'll be thankful if somebody could explain me this in detail or direct me to a relevant documentation/ blog
Thanks,
Ronny

Hi,
When you have only one logical Table Source(LTS).
You don't specify the logical levels. By default it would consider the detail level of the logical levels mapped to the fact table.
When you have Multiple logical Table Source(LTS).
The concept of Multiple LTS comes into picture when you have multiple sources. The BI server picks the optimum logical source depending upon the fields (columns) selected. And also depends on the Number of element set while creating the dimension hierarchies. Refer-http://gerardnico.com/wiki/dat/obiee/level_number_element
For example- Suppose you have two logical table source Fact 1 and Fact 2 and logical levels( dimension hierarchies are created for two dimensions Dim 1 and Dim 2).
For the first Fact 1 source logical level is mapped only with Dim 1 and Fact 2 is mapped to Dim 2.
(You need to decide which fact source to hit depending upon the dimensions used in the report.)
Then in the report when you select Dim 1 (by means of column selector/filters) then Fact 1 source will be hit and same appears in the query.
Then in the report when you select Dim 2 (by means of column selector/filters) then Fact 2 source will be hit and same appears in the query.
One more situation where you have mapped Fact 1 with Dim 1 First level of aggregation and Fact 2 with Dim 1 with Detailed level. Then the BI server picks depending upon the user's request. If the request data can be pulled from the detailed level ( which tends to be optimum then picks from the second source).
So, its always better to set the logical source and check the query, if its hitting the correct sources according to the requirements.
Regards,
MuRam

Many times my laptop s temperature getting vey hight,what does that means guys ?, Many times my laptop s temperature getting vey hight,what does that means guys ?, Many times my laptop s temperature getting vey hight,what does that means guys ?

Many times my laptop s temperature getting vey hight,what does that means guys ?

Try going to About this Mac, under Apple menu, more info, in the left column hard ware click power. Under battery info see what it says under battery health>condition. If not normal, the battery probably needs service (replacement). You want take it to the Apple store to have it replaced, as this can other more serious issues if left un-tended to.

What does it mean when I see the file with the question mark on my screen?

What does it mean when I see a file with a question mark on the screen?

Means no bootable system can be found or required system files are missing or damaged. Reinstall OS X.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

HT4296 What does this mean "remains disabled by default in this update"? Does that mean I don't have Java any more because of this update?

What does this mean (referring to the Java update on the Mac OS X 10.5.8) "remains disabled by default in this update"? Does that mean I don't have Java any more because of this update?

You should still have JAVA. Open Safari, then in the top Menu Bar, click on Safari and pull down to Preferences.
Safari> Preferences> Security> and click check the buttons next to Enable JAVA and Enable Javascript.
You might have to restart Safari, I'm not sure about that.
Good luck.

What does it mean by scratch disk full?

Hi
can someone help me with my photoshop
every time i try to save something it tells me that my Scratch disk is full.
what does that mean and how to do solve it?

Use Photoshop menu Edit>Preferences>Performance add additional scratch space. Then stop and restart Photoshop. It means the disk you have Photoshop scratch space on has filled up. Photoshop can gobble lots of scratch disk when your using PS. When you close down the space will be returned to you system.

Keychain password what does that mean?

keychain password what does that mean?

Keychain is an Apple technology dating back to OS9 that saves commonly-used passwords for web sites, your email, etc. It matches the web site or applcaiotn to waht's stord and reloads the password to save re-entering it all the time.
What are you doing when the computer asks for a keychain password? Usually you can access the Keychain Utility's stored info using your administrative password.
It would help if we knew your Mac OS version. "iOS 6.1.2" in your profile is not a computer OS, but used only for iDevices. Doing "About this Mac" from your Apple menu wil show your actual Mac OS version. Once you have it, you should change your profile to match that--it will get you faster help for future questions.
If you let us know the OS version, we can get you moved to the forum for that version, where you should get faster help with Keychain issues. This forum--although it's hard to tell from the unfortunate choice of labels--is for iMacs made before 2006 and doesn;t get as much traffice as forums for newer Mac models.

What does "BookMark" mean in Query menu

Similar Messages

Maybe you are looking for