What does cmd-1 do?

I'm mystified what pressing cmd-1 (or cmd-2, cmd-3, etc.) is actually supposed to do.
What it seems to do is hide all images in the current catalog (assuming you are viewing a catalog). Any new images copied to it disappear as well.
It is not undo-able, but I have figured out that using ctrl-6 or ctrl-` will reveal the selection again. It's not in any of the menus or quick-reference card either!
As it's an easy mistake to make when rating images, I imagine somebody else must have come across this.

Robert,
I still have not seen this documented anywhere!
Page 183.
The previous statement is reinforced. Aperture is a very sophisticated program and mastering all its functions (and keyboard shortcuts) takes a lot of time. But it is worth it.
I came home tonight and imported about 75 RAW files with family snaps from Mother's Day dinner. Edited all the images, keyworded them extensively, color corrected them the selects, made a web album and published it. The whole job took about 40-minutes. With practive it will probably be less than 30-minutes.
In Bridge, ACR, Photoshop, and iView (my preivious workflow apps) it would have been far slower I would guess more than twice as much time required.
Thomas

Similar Messages

HT1710 What does it mean if the blue screen appears and stays on with no further activity?

My disk failed. Apple store replaced it with a disk with OS X. I tried to load from valid time machine backup. eventually I got a blue screen.
What does this mean and what should I do?
Here is more of this story:
When I picked up my computer after the disk was replaced, I was told I could do a time machine recovery. After about 6 hours the recovery said it had less than a minute to go and was transferring "your" network settings. at 9 hours it said the same thing.
I rebooted DVD to try to reload MAC OS X but it crashed with "INSTALL FAILED MAC OS X could not be installed on your computer Click restart and try again"
I did but it would not boot.
I reloaded the disk utility and and it showed no problems but the next OS X install failed (hung).
I then wrote zeros to all the disk (could not find a reformat command). This went tith out error.
I restarted the OSX install and it appeared to work.
I started the install from time machine again and it hung in the same place. (less than a minute remaining. The completion bar had a sliver of white at the end but was mostly blue)

It just means it's hungup just before completing, we can get more info with Verbose boot...
CMD+v keys on bootup...
http://support.apple.com/kb/HT1492

After the install upgrade my imac wont load anymore i tried to do a safe mode load and wehn i do at the end of it it tells me that i have a "systemShutdown false" what does this mean

after the install upgrade my imac wont load anymore i tried to do a safe mode load and wehn i do at the end of it it tells me that i have a "systemShutdown false" what does this mean

If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

What does "extracted channel PDF" mean and why does it continually duplicate on my desktop? I think it happens when I move a file in Finder to another file and when I copy some web files. How do I avoid this on my Mac (Mavericks)? Thanks for your help!

What does "extracted channel PDF" mean and why does it continually duplicate on my desktop? I think it happens when I move a file in Finder to another file and when I copy some web files. I have to immediately move to trash all the duplications on my desktop. How do I avoid this on my Mac (Mavericks)? Thanks for your help!

What application is set to open PDF files? If you CNTRL click on the file and open with Preview does the problem occur?
If not change the default application to open PDF files to Preview.
You can do this by highlighting the file and either use CMD i or Get Info , this will open a window with the info on the file with an option to change the application that opens the file.
That's all I can think of.

What does 'Socket is not connected' when slow booting mean?

I updated software and restarted my mac, It didn't move from the grey screen so I powered off and on while pressing Shift + Cmd +V. It now will not not move from 'launch_msg(): Socket is not connected'. What does this mean?

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

What does it mean on an ipad2 when the lock icon beside the signal strength comes on and off?

What does it mean on an ipad2 when the lock icon beside the signal strength comes on and off, and an intermittant lock appears on the left beside the SSID name?
I am trying to connect to a Cisco network, and even though the SSID is open authentication the ipad will either say it cannot connect or ask for the password.

That's a "resize" arrow. Try relaunching Finder (Cmd+Opt+Esc) or >Force Quit

What does it mean start up disk need space

keeps popping up start disk need to free space what does that mean ?

It very likely means your hard drive is running out of room. Click on the Macintosh HD icon on your desktop and click cmd-I to open an information window. That will tell you how much room is used and available. If it's very low (eg under 1GB) you will need to move some files off the drive. Look in your Downloads folder for files you can trash; empty your Trash too. If you have a lot of movies, those will take up the most room, followed by pictures and music. There are tools which will tell you where your large files and folders are - search for Omnidisksweeper, Whatsize and Daisydisk.
Matt

What does mean when a imac screen goes all white

what does mean when a imac screen goes all white

Hopefully its not the logic board. try a PRAM reset: http://support.apple.com/kb/HT1379
basically hold cmd, option, P, and R directly after start. Keep holding them down until you hear two chimes. That indicates a successful PRAM reset. It is not uncommon to hear 3.
If that doesnt work try an SMC reset. Pull out the power cord from the back of the mac for atleast 15 seconds. plug it in again for 5 seconds and power back on ...http://support.apple.com/kb/HT3964
Regards,
Cody

What does the PopUp "Prevent this page from creating additional dialogs" really mean and if I check the Box, how do I undo this if this was the Wrong Thing To Do?

What does the PopUp "Prevent this page from creating additional dialogs" really mean and if I check the Box, how do I undo this if this was the Wrong Thing To Do?
Details
Constantly, while using Firefox (Beta v 11.0), and/or ESPECIALLY, when I have my eMail @ Mail.com open, I get this PopUp stating: "For security reasons, restarting mail.com Mail is possible only via the mail.com Mail Service. Please close this window and restart mail.com Mail" BUT Then there is a CHECKBOX: "Prevent this page from creating additional dialogs."
I have no idea if Checking this Box is a Good Idea or if it will Screw-Up my mail.com Mail Service...
Anyone have an answer or explanation of the Use of this Little Check-Box?
BJ Orden [email protected]

You do not get any pop-up windows on that website if you tick that box.
That setting is stored in the cache and you should see pop-ups again if you reload the page and bypass the cache.
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7
I found the manual update, which worked!
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604

Hi Barbara,
For failed 13.1.2 update error U44M1P7, Please refer to the solution mentioned in the following threads :
http://forums.adobe.com/message/5396792#5396792
http://forums.adobe.com/message/5409050#5409050

In relation to Wireless Speakers, what does 'Connected Music Server' mean?

Hello All,
Need some advise. I am looking at purchasing a Wireless speaker. I currently have a MacBook Pro 10.8 which has my music stored in iTunes. My phone is an Android 4.2.2 device.
Therefore, I need to buy a wireless speaker that supports AirPlay (aka stream music from my MacBook Pro) and also has an app that I can install on my Android device which can threby access the iTunes playlist so that I can use my phone as the remote control.
Based on the above requirements, I narrowed down my chocie to the Denon Cocoon Home (whose app is also Deno Cocoon) and the Pioneer A4 XW-SMA4-K (whose app is Pioneer ControlApp)
Question 1:
The Denon App says this:
- When connected to your home Wi-Fi network you can further expand your choice of music by using the Music Server to browse and play all the music that is stored on your PC, Mac or Network Attached Storage (NAS) drive.
- DRM protected music is NOT supported by the Denon Cocoon app (or any 3rd party music app)
My question what does one mean by a 'connected music server?' If an AirPlay speaker receives iTunes music, does it automatically become a 'connected music server?' Technically, is music in my iTunes app (some purchased from iTunes store, some imported) considered DRM protected music? Can ithe app read the iTunes music given the above contraint?
Question 2:
The Pioneer App has a lot of complicated lingo that says:
Network Audio Player
- Browse and select music files on your connected music server
AV Receiver
- Browse and select music files on your connected music server
Network CD Receiver System
- Browse and select music files on your connected music server
Wireless Speaker
- Volume up/down
- Select Internet Radio Stations
- PUSH PLAYER
It uses one app for multiple devices and in the app description has a breakdown for what the app supports for every device. Now the 'connected music server' is not mentioned in 'Wireless Speaker' but the same is mentioned in 'Network Audio Player' so what does that mean?
I am more veered towards the Pioneer speaker as it costs $100 less and has better reviews but I will go with the one that will aloow me to use my Android phone as a remote control to access the music that the speaker is streaming from my MacBook pro.

CSS SSL module sending a Close_Notify.
Try these links;
http://www.cisco.com/warp/public/117/basic_css_lb_config.html
http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a008057a127.html

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Downloads from itunes fail - error code 8003 - what does that mean, or more importantly, how do I get what I paid for?

Try the troubleshooting for that error code on this page : iTunes: Advanced iTunes Store troubleshooting - Apple Support (search for '8003' on the page, it's just below half-way down)

I replaced my iPhone with a Galaxy 5 and am not receiving all of my text messages. The sales person told me to remove my phone number from iTunes to stop this from happening. Is that true? What does iTunes have to do with text messages?

I replaced my iPhone with a Samsung Galaxy5 and I am not receiving all of my text messages now. The rep at the store told me to go to iTunes and take my phone # off of the account and that would fix the problem. Is that true? What does iTunes have to do with text messages anyway?

You need to remove your phone number from the iMessage system.
Read here: http://support.apple.com/kb/ts5185
~Lyssa

GetResponseCode() returns -1,what does it mean

Hi ,
The HttpURLConnection class's getResponseCode() method returns -1.
getResponseMessage() returns null.i m accessing my servlet through a proxy.i know only about 1xx to 5xx codes.i dont know what does it mean by -1.But at server side the request is properly sent and processed and i m getting 200 and ok after processing at serverside. the object is sent to client also. but it is not received by the client.
Null object is returned.I think proxy is the culprit.If anyone can help me what -1 means,it will be really greatfull to diagnoise my issue in detail and solve my problem soon.
Your help will be greatfull.
Thanks
prakash

As it says perfectly clearly, right there in the API documentation for the method:
"Returns -1 if no code can be discerned from the response (i.e., the response is not valid HTTP)."

I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???

I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???

If your iPhone is locked to a wireless provider, only that wireless provider
can unlock it. Contact the wireless provider in Hong Kong to see if they
offer unlocking and if you qualify.
If your iPhone is locked to an AppleID that you do not know, return it for
a refund as it is useless. Only the person whose AppleID was used for
activation can remove the lock. There is no workaround for Activation Lock.
If neither of the above is what you are facing, provide more detail so someone
may offer a solution.

What does cmd-1 do?

Similar Messages

Maybe you are looking for