What does full name on Part number?

Dear all,
Does any one know the full name of part number as below?
1- WS-C3650-48FS
what is full name WS, FS?
2- WS-C3650-48TQ
what is full name TQ?
3-  WS-C2960X-48FPD-L
what is full name X , FPD-L
do you have link to show on this ?
Best Regards,
Rechard

There is not a publicly published complete and explicit definition of the letters Cisco uses in their product nomenclature. the best one can do is look at either the product data sheet or Cisco Commerce Workspace (partner / reseller only) and see what the product description is.
For instance, WS-C3650FS (-E or -L) is "Cisco Catalyst 3650 48 Port Full PoE 4x1G Uplink IP Services" (with Enhanced or Lanbase license), WS-C3650-48TQ is "Cisco Catalyst 3650 48 Port Data 4x10G Uplink IP Services" and WS-C2960X-48FPD-L is "Catalyst 2960-X 48 GigE PoE 740W, 2 x 10G SFP+, LAN Base".
WS generally is a prefix on part numbers for all Wire Speed switch products. (Though that breaks down a bit on some of the smaller Catalyst models.) I've also seen it refer to "Workgroup Switch" class products.
FS means is is a switch with fiber user ports.
X distinguishes the newer 2960 models from the original 2960 series.
FPD-L mean it has Full PoE+ and comes with Lanbase software feature license.
Generally the letters at the end refer to the uplink type and license level.
Also please see this earlier discussion:
https://supportforums.cisco.com/thread/2135341

Similar Messages

  • Does anyone know the part number for the printhead for the HP Officejet 6500a

    My printer doesn't print, initally it didn't print black, then I soaked the printhead in hot water as instructed now it doesn't print at all, so I need to replace it.  Does anyone know the part number for the printhead for the HP Officejet 6500aThank You,

    Hi Temprosal,I looked up the product specifications for the HP Officjet 6500a.Here are steps for ordering a new printhead: These steps apply to the United States only.If HP replaces your printhead assembly under warranty, you receive a new printhead assembly, cleaning materials, and a full set of new ink cartridges.If your printhead assembly is no longer under warranty, you can purchase a new one online.Go to the HP Parts Store website (in English).  https://h20141.www2.hp.com/Hpparts/CountryChoice.aspxUnder Find your part(s), type CN643A in the Search by part number text box.Follow the on-screen instructions to order the printhead assembly.Jean

  • I'm just curious, what does Apple name the second hard drive

    I got a G5 with one hard drive which was by default named "Macintosh HD". When someone orders two hard drives what does Apple name the second hard drive by default? I'm just curious.

    "...what does Apple name the second hard drive..."
    Raul.

  • What does (Full), after the name, under a game icon mean?

    What does the word (Full), after the name, under a game icon, mean?

    A "Full" version of the game for Mac.

  • What is the proper AppleCare part number...

    ...for the original 11" MBA?
    I have the option to purchase 2 different part numbers that are both for MB, MBA and 13" MBP. One is less expensive than the other. I can't seem to find any part number beyond the current one sold in the Apple Store. The part number in question is MC246LL/B. Anyone?

    Hi:
    I can't find any specs on your notebook to pinpoint the motherboard you need.
    Below is the link to the service manual for your notebook series.
    http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
    See chapter 3, pages 22 and 23.
    If you know your processor, GPU, and what wireless device you have, you should be able to select the exact part # you need.
    Paul

  • What is the motherboar​d part number for hp dv6-3037tx​?

    I have a bricked laptop and would like to buy a replacement motherboard
    What is the motherboard part number for hp dv6-3037tx notebook PC?
    Laptop product number is WY285PA.
    And also, will the replacement motherboard be identical to the old one (i.e. same GPU). I don't want to get a new motherboard with a crappy GPU, my old one was great.
    Thanks 

    Hi:
    I can't find any specs on your notebook to pinpoint the motherboard you need.
    Below is the link to the service manual for your notebook series.
    http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
    See chapter 3, pages 22 and 23.
    If you know your processor, GPU, and what wireless device you have, you should be able to select the exact part # you need.
    Paul

  • What is the name the part under the kepboard on mini 5103?

    For a Mini 5103, I'm looking to purchase a keyboard and the layer beneath the keyboard, between the motherboard and the keyboard, but I don't know what that part is called. Please let me know what to call it. Thanks!
    Mini 5103, Atom N550, 360 hard drive, 2G
    This question was solved.
    View Solution.

    HI,  
    The layer beneath the keyboard, between the motherboard and the keyboard is called "TOP COVER"
    Check this link for ordering parts (this link includes part number and part description)
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=ca&taskId=125&prodSeriesId=...
    You can Order from HP directly or you can get them cheaper go to  Ebay by searching with the partnumber
    Hope this helps,,
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    **Click the KUDOS star on the left to say 'Thanks'**
    **---'Accept as Solution' ----**if it solves your problem and make it easier for other people to find solutions.

  • What does "domain name is used for your typekit fonts & SEO sitemap.xml" mean?

    Why is Muse now asking, on either uploading files via Muse or externally through another ftp, for a domain name that is used for your typekit fonts & SEO sitemap.xml?
    I used Muse for exporting my files to ftp externally a few months back and I could add whatever I liked into the domain name field (which made sense as I could choose an appropriate name). I upgraded Muse this morning and now no domain name I add in here is accepted and on hovering over the info icon I get a "domain name is used for your typekit fonts & SEO sitemap.xml. What does that mean exactly?
    If anyone can help?

    Hi Guys
    Great thread Omniscient! Like Bian, my username is just my name. It's a unisex name and caused a nice little debate in the early days of this forum as to whether I was male or female!
    Kerry is from the Irish meaning 'dark-haired' but I am a blondie (natural blonde when younger, bottle blonde now I am older!) I think my mum just liked the name...
    There are lots of interesting usernames out there - tell us about them and where they come from!
    Cheers
    Kerry
    Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • What does Friendly Name Property do?

    I am testing a WinForms application with Coded UI.  I'm trying to understand what the Friendly Name property does.  
    When viewing a Coded UI Map inside Visual Studio and looking at the properties of a particular control, I see the following items:
    Control Type
    Friendly Name
    Search Configurations
    Search Properties
    Technology Name
    Window Titles
    I'm trying to understand what Friendly Name does.  Thanks.

    Hello TheChargs,
    Glad to receive your reply.
    When you drag the crosshair on the control, you will view the properties of the control such as FriendlyName property. We can use these propertied to search the control through searchproperties and filterproperties.
    Reference:
    How does “Coded UI test” finds a control ??
    Yes if the friendlyname property value is “BtnSubmit”, and you use it to search the control, CUIT will use the “BtnSubmit” when searching the control. CUIT will check some controls based on the searchproperties which you specify. If
    a control matches the search properties and filter properties, it will locate the control as the target control.
    In addition, maybe you also can get some idea from the following blog :
    Hand-coding a Coded UI Test
    Best regards,
    Amanda Zhu [MSFT]
    MSDN Community Support | Feedback to us
    Develop and promote your apps in Windows Store
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • Satellite Pro M70 - What is the Bluetooth module part number

    Could someone who has a Toshiba Satellite Pro M70, with bluetooth, tell me the part number of the bluetooth module please?
    You can reed it from one of the labels under your notebook. You can read bluetooth in it, the part number is in the up left side of the label, and it will be something like this: PA3418U-BTM.
    Thanks.

    Hi
    Why you dont make a call to the authorized service partner in your country and would order an compatible BT module for your notebook?
    In my opinion this would be the easiest way to get one.
    Unfortunately Im not owner of Sat Pro M70 and therefore I dont know the BT part number. But my A210 has been equipped with an internal BT module and the part number is PA3608U-1BTM
    Greets

  • What is the Replacement Product Part Number of the SFP MGBSX1 that I can use?

    I did a BOM using ESW-520-48-K9 with SFP MGBSX1 (I need 1000BaseSX).
    But the configuartion tool said that Unit Price Column: "EOL" indicates item is end of life; N/A indicates item not available in current pricelist

    We still sell the MGBSX1 as a refurbished item. You can order part number MGBSX1-RF in Cisco Commerce Workspace.
    MGBSX1-RF (Gigabit Ethernet SX Mini-GBIC SFP Transceiver REFURBISHED) - USD 95.00 
    Best regards, 
    "Nilz" 
    Nilo Noguera 
    .:|:.:|:. Specialist, Cisco Global Virtual Engineering - Cisco Partner Help 
    http://www.cisco.com/web/partners/tools/ph.html 

  • Have bad virus cannot open firefox or any other exe. file, where within firefox (what does firefox name folder that contains passwords) does it keep my passwords for various bookmarks

    because of a virus I cannot open Firefox or nay other exe. file. I need to retrieve my passwords for all of my bookmarks. Where within Firefox can i find the folder that has these passwords, what is the name Firefox gives this folder!!
    thanks, Mitch

    further observations :
    22:24:31:868 LOG_CLIENT_DB:checking http header for entry ip=192.168.1.66, mac=
    22:24:31:868 LOG_CLIENT_DB:Checking http header to find a matching client.db entry (ip=192.168.1.66)
    22:24:31:869 LOG_CLIENT_DB:HHetting client adaptation to 49 (ip=192.168.1.66)
    22:24:36:878 LOG_CLIENT_DB:The entry found in known clients list is already validated (ip=192.168.1.66)
    22:24:36:878 LOG_CLIENT_DB:checking http header for entry ip=192.168.1.66, mac=
    22:24:36:878 LOG_CLIENT_DB:Checking http header to find a matching client.db entry (ip=192.168.1.66)
    22:24:36:879 LOG_CLIENT_DB:HHetting client adaptation to 49 (ip=192.168.1.66)
    22:24:37:926 LOG_CLIENT_DB:The entry found in known clients list is already validated (ip=192.168.1.76)
    22:24:37:926 LOG_CLIENT_DB:checking http header for entry ip=192.168.1.76, mac=
    22:24:37:926 LOG_CLIENT_DB:Checking http header to find a matching client.db entry (ip=192.168.1.76)
    22:24:37:927 LOG_CLIENT_DB:Ignoring client with fixed flag = TRUE (ip=192.168.1.76)
    22:2
    thisnthing keeps on probing itself ... i wonder why. (.66 is the NMH  .76 is my pc ... ) it is also strange it cannot retrieve its own mac address....
    Oh , you can turn off the logging features again when done. it only takes time and diskspace on the NMH
    And before i get flamed : the comments i make about 'broken source' : i have no gripe with linux. I have a problem with companies that grab a bunch of stuff that is free ,slap it together, sell it for a lot of money and give no support to the people that bought it. They want all the money for no effort .. they turn open source into broken source ...

  • What does servlet-name & jsp-file tags do...

    Could someone please tell me how does the following tags pair work, in a JSP/servlet based application.
    <servlet-name>Hellow</servlet-name>
    <jsp-file>/Appl/Jsp/process.jsp</jsp-file>
    What is the relationship between the Hellow and the /Appl/Jsp/process.jsp file
    Regards
    AN

    When you register a servlet in the deployment descriptor, you must always specify <servlet-name>. The other required parameter is EITHER <servlet-class> OR <jsp-file>. For a standard servlet, use <servlet-class>, for a JSP use <jsp-file>.
    Servlets are always registered, JSPs are not. The reason to register a JSP is to set other values such as <load-on-startup>. In this case, the JSP must be converted to a servlet before deployment.
    Read the servlet spec for a better and fuller description.

  • What does the additional BW-part of APO do ?

    I was reading the book  * Supply Chain Management with APO by Jorg Thomas Dickersbach. It say that there is a there is a additional BW-part of APO. Why there is an additional BW-part in APO and how it is used in the business process .
    Thanks
    Vinay
    Edited by: vinay kumar on May 15, 2008 6:28 AM

    Vinay,
    Further to what RAJ has written.
    The BW Setup in APO is used primarily in the Demand Planning Module which supports multiple Business Processes  like Demand Planning, VMI (Vendor Managed Inventory),  SMI ... etc. anything that requires data to be stored in TimeSeries Planning Areas and also backup into BW InfoCubes (now called InfoProviders) ... for you to help in Reporting.
    You can Release Demand Data directly from an InfoCube to SNP.  You can update the InfoCube from Sales History coming from R3 for the purpose of Forecasting.
    In terms of KPIs reporting ... it is recommended that BW Reporting Activity is done on a Central Enterprise BW Systema and not the APO System. Use the APO BW for only SupplyChain Processes inside of APO (as above).
    Hope this helps.  Reward points if you do.
    Regards,
    Ambrish

  • What does this mean: Essbase Error Number %d.

    Good day guys,
    can anyone please tell me what's this error tells?
    Essbase Error Number %d.
    Thanks.

    Hi. This error is generated during a data load in EIS.
    The log says Essbase Error Number %d.

Maybe you are looking for

  • Removing specific XML tag in XSLT mapping

    Hi there, I've asked before about a XML to string XSLT mapping and the answers provided here helped me to successfully do that mapping! Thanks a lot! I'm using the following mapping to convert a string back to XML. <?xml version="1.0" encoding="UTF-8

  • ASA 5520: Create Network Object for range of hosts?

    Hi, I'm new to Cisco Firewalling. I'm migrating our network objects from our current firewall to a new ASA 5520 configuration. I'm using ASDM 6.4 for configuration. We have a range of IP addresses for hosts that we need to add to a firewall rule/ACL.

  • Changing discount account from revenue

    Hi, referring to metalink document number 240123.1, which state that changing discount acount to account other than revenue account was unavailable and "may" be handled by future releases. Is this feature available now in R12? how can subledger accou

  • Dev vs. Prod: Proper Project Structure

    I'm just learning the "proper" way of structuring projects and would like to know the convention for managing items like Log4j paths, Connection URLs for Tomcat, etc. How do you NOT have to go and change everything by hand. Is there some way to flip

  • Where to enter Authentication details provided by external Webservice

    Hi all, Iam consuming an external webservice by creating a proxy and created a logical port for it. But while passing data to extenal webservice, it is asking for authentication(userid and password)as they have provided to access their server. So, wh