What does is mean when MacBookPro only charges to 99% instead of 100%?
What does it mean when MacBookPro only charges to 99% instead of 100%?
Perfectly normal behaviour.
http://support.apple.com/kb/TS1909
Similar Messages
-
It runs the computer but won't charge the battery...trying to figure if it's a battery or charger issue. I can't find any info on it flashing between the two colours. The battery appears to be in good shape and it only a few months old
Unless it's from a same model of Mac, I wouldn't do this.
For some reason the laptops are having issues using other models of chargers, I think Apple started doing this recently to avoid people using the wrong charger with the same connector.
So just take the machine in for service,
I have some MagSafe trouble shooting links here under #1 SMC Reset
Step by Step to fix your Mac -
What does it mean when it says no SIM card instead of 3G or AT
My iPad continues to say no sim, why doesn't it connect properly
It means either the iPad can't read the sim card, or its not present at all.
You can try to remove the Sim card if its there and insert it again, see if that resolves the issue.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
Try resetting the device: Hold down the home and power buttons until the Apple Logo shows up.
If it still won't see the sim card and connect to the cllular network, you may nheed to contact your cellular provider have them issue you a new sim card as that one may have failed.
As for usage, well if it can't find a sim card it can't connect to the cellular network to get internet. It can still use a Wifi connection just fine, but not the celluar connection. -
What does it mean when a purchase is billed to "store credit"? Is it one of those iTunes gift vouchers? Only reason I ask is because I downloaded Ken Follit's FREE book from the 12 days of Christmas app and seem to have been charged 10.99 for it!?
Thank you so much for the link. Am persevering thru it, will get there eventually, as I had already tried to press the Report a Problem link on the invoice, but it won' t connect to iTunes store on my iPad, it keeps saying can't connect. Infuriating. But thank you, you found me a link I would have taken ages to find.
-
What does that mean when your iPod only charges when you battery dies? (meaning: when my battery isn't dead it wont charge but when the battery is dead thats the only time it will charge)
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
What does it mean if my ipod charges only when its off
ok my ipod charges only when its off , ex.i plug my charger in while its on but it doesnt charge at all, not even if i put it in the pc usb ports.However wheni put the chargerr in the ipod and turn it off, then come back an hour later or so it is charged up.Anybody knows what does it mean when it does that.keep in mind the ipod doesnt charge whille its on.
It means that when your ipad is running with your charger connected, it is using about as much electrical energy as your charger is supplying to your battery. When your ipad is shut down there are no apps or programs running so all of the charger's output is devoted to recharging the battery. Your ipod battery may be running down a bit because of age, or you could possibly have too many apps running at the same time. Running gamming applications uses quite a bit of power. I'm making the assumption that your charger is functioning properly. Also, charging via the USB port on your computer is not as efficient as using your wall charger since the charging current provided by the computer usb port is a bit less than the wall charger. If you use an iPad wall charger it will provide more charging current and therefor would be more effective.
-
What does it mean when there is an I tunes symbol on the screen with a charging cable underneath that?
Turn on the computer. Take the charging cable and connect one end to the bottom of the Touch and the other to a USB on your computer (back of the computer if this is a desktop computer). iTunes should open automatically and will probably give you a message it has detected an iPod in Recovery mode. Follow the onscreen steps from there and Restore it from any backup on the computer.
-
What does it mean when the screen shows only the time and the play button
what does it mean when i turn on my i-pod and it has a white screen and all it displays is the time and the play button cant get to the main screen to play music
Is the hold switch in the on position? Try resetting the iPod. To do this, press and hold both the Select/Center and menu buttons together long enough for the Apple logo to appear. The iPod may have simply locked up.
B-rock -
Angel Season 5 -- what does it mean when it says "repackage"?
For some reason there are two versions of Angel Season 5 listed and only one of them is on sale. The one that is on sale says "repackage" in the product title and I was wondering if that meant that it was used, or if maybe it just meant different packaging. So, what does it mean when it says "repackage"?
This is the page I was looking at http://www.bestbuy.com/site/olspage.jsp?skuId=8014631&productCategoryId=cat02564&type=product&id=1568268
Thanks!
HeatherHey Heather -
The only difference in those two skus is the actual packaging. One is a thicker package (older one) and one is a thinner packaging (newer one). You should be able to receive the sale price on either.
I hope this helps!
Dorothy
Community Connector
Best Buy® Corporate
Dorothy|Social Media Supervisor | Best Buy® Corporate
Private Message -
What does it mean when you call someone and it goes straight to the 3 beeps to mean cancelled
hi
what does it mean when you call someone and it goes straight to the 3 beeps to mean cancelled? this phone doesnt even ring, it just goes straight to the BEEP-BEEP-BEEP, its an iphone 4 and on IOS7 and it was ringing eailier on in the day when i spoke to this person. it wouldn't mean i have been blocked would it?
what does all this mean?
thanks
mrredrunner100i got my friend to message this person to see if they had the same problem, and the message went through and i think he got a reply, and all of a sudden this has started to work again (calls only) but apparently none of my messages went through that i have sent since the block activated. and they still havent even though there working again, and "apparently" a message was sent to me at 9pm today and it has never arrived. so imessage and text still isnt working, before i go asking this person about this, is this a genuine block or is there a phone problem?
-
what does it mean when you receive a text on your iphone 6 from your own number and the message is duplicated on each side (sent/received) and has "verizon message" with a long number at the end of the text, duplicated as well?
Great question stacybrownie! Let's get to the bottom of this so that it's not a cause for concern. When a message is sent to/from your own number, it will display as one sent, one received. This makes it display two messages as you are seeing. Let's clarify the second part of your question. Where do you see "Verizon Message" exactly? What is the long number at the end of the text? When did this start and is it with all text messages or only this instance?
AdaS_VZW
Follow us on Twitter at @VZWSupport -
What does it mean when i have a flashing folder with a question mark in it when i try to boot up?
what does it mean when I have a flashing folder with a question mark in the middle of it when I try to boot the interface?
It means the system cannot find a bootable OS. Reinstall OS X.
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
what does it mean when i turn on my mini wi fi i pad and it shws a microphone and lightening coming out from it and nothing else is able to be brought up??
I think that you are seeing the lightning bolt and the lightning connector on the screen. That means that you have to plug the iPad into a wall socket using the power adapter becuse the battery is too low to charge using your computer.
Look at the photos on this website and not the one under the Connect to Power heading.
Charge the battery in your iPad - Apple Support -
What does it mean when I click on my wifi name and it show I'm on my wifi, but the network keeps thinking and the ipad says, Safari cannot open this page because it is not connected to the internet. ?
When you click on the WiFi network name, have you also provided the password for accessing the network? You should get a dialogue box asking you for the security information the first time you connect.
If you are not able to connect, you might want to go to Settings > General > Reset > Reset network settings.
Then go back to Settings > WiFi and select your network name again and make sure the security information is now entered correctly.
If you still cannot connect, power down the router, wait a few minutes, power up the router, with the iPad powered down the whole time, and after the router has had several minutes to stabilize power up the iPad. See if it now connects correctly. -
What does it mean when I get "there was an error in the App Store. Please try again later. (4)"?
What does it mean when I get “there was an error in the App Store. Please try again later. (4)”?
Sign out of the Mac App Store via the Store menu
Quit the Mac App Store
Log out of your Mac OS X user account (from the Apple menu)
Log back in to your user account
Launch the Mac App Store, sign in, and try downloading again
You should be able to download any app trouble free now. If you still have problems, reboot your Mac.
Maybe you are looking for
-
I call a bi publisher report from an apex button using: javascript:popupURL('&BI_URL.Guest/MERCURY/CUSTOMS/REJECTS/MER_REJECTS_MISC/MER_REJECTS_MISC.xdo?_xpf=&_xpt=0&_xdo=%2FGuest%2FMERCURY%2FCUSTOMS%2FREJECTS%2FMER_REJECTS_MISC%2FMER_REJECTS_MISC.xd
-
How can I set up an email signature in the Nokia 822
How can I set up an email signature in the Nokia 822?
-
FI tables related to profit center
Dear Expert I want to know FI Tables which has profit centers related G/L accounts of Assets and Liablities . Thanks VG.
-
Problem with mountian lion stop download 53.25
hi please help me i buy mountian lion and download stop 53.25 the system on my macbookpro virsion 10.7.4
-
Problem with rename command in ftp_command
hi all , i am facing a problem in renaming a file by rename command... this is how i am calling the fm ftp_command CALL FUNCTION 'FTP_COMMAND' EXPORTING handle = g_handle command = 'RENAME l_templine_file l_templine_file1