What does it mean? 500 Internal Server Error? Is this a Goog;e thing?

When I open Firefox, the page is blank with 500 Internal Server Error at the top. I think it might be an issue with Google, because I can access sites from the address page, but no access to Google. Has anyone else had this occur?

Does is still happen in Firefox Safe Mode. See [[Safe Mode]].
If so, it's probably being caused by an add-on.

Similar Messages

  • Why does the message '500 internal server error' appear when I use any search engine?

    I am able to type a web address and use the internet successfully but when using ANY search engine I get the '500 internal server error' message. This appears if I type in a word to search '''bold text'''and the result is the error message. I have recently uninstalled rapport and hitman pro. Please help.

    Did you check your security software (firewall)?
    Which security software (firewall) do you have?
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • I have an error code , 500, internal server error, Is this an airport card problem?

    I get an error code, 500 Internal Server Error when I try to open Safari. How do I correct it or somehow remedy this?

    Hello Thomas,
    Thank you for the details of the issue you are experiencing with Safari when using Wi-Fi.  I would be concerned about this too.
    I recommend following the steps in the section labeled "Symptom: My Mac does not connect to the Internet" in the following article to resolve an issue like the one you described:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Thank you for posting in the Apple Support Community.
    Best,
    Sheila M.

  • CANNOT ACCES EXCHANGE ADMIN CENTER (ECP) ON EXCHANGE SERVER 2013. GOT HTTP 500 INTERNAL SERVER ERROR

    HI, I just installed Exchange server 2013 Standar SP1 on a windows server 2012.  I have 3 servers one is a Domain Controller, the other one has the MBX role, and the last one the CAS role,  first i installed the MBX and after the CAS role, i passed
    prerequisite check without any issue.  However when I tried access Exchange Admin Centre (ECP) at https:\\servername\ecp
    I got HTTP 500 Internal Server Error saying  "This website cannot display the page.  Most likely causes: 1. The website is under maintenance. 2. The website has a programming error."   I tried access ECP at https://localhost/ecp and
    I got the same problem.  Under either cases I was able to see the logon page of  ECP and I was able to enter my credential (e.g. domain\user name, password).  However I got HTTP 500 Internal Server Error at the next page.
    I appreciate your help, on my case.

    Hi,
    The link that Jatin points to should be this.
    https://social.technet.microsoft.com/Forums/en-US/2f64d305-e9e2-4f48-a5b4-4f72d7bca801/exchange-2013-owaecp-http-500-internal-server-error?forum=exchangesvrclients
    Please view the Application Pool to check whether the version of .NET Framework is 4.0 and try the following command.
    %windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe –i.
    If this does not help then please check if there is any warnings or errors in Event Log and take your time to post them for my further troubleshooting.
    Thanks.

  • When opening firefox, it always says 500 internal server error.

    Whenever I open firefox to its home or any other web site, it only provide 500 internal server error. This error does not involve manual proxy configuration.
    Have also removed and download firefox 4 and still does the same thing.
    Firefox was downloaded only 3 months ago.

    It is the "Relevant Knowledge" Add On. It's Spyware. If you disable it and restart FireFox it'll allow you to browse again. Then you'll want to do how to remove it.
    EHow suggests just uninstalling from control panel > Uninstall programs.
    http://www.ehow.com/how_5634500_remove-relevant-knowledge-spyware.html
    I suggest you download Malware Bytes which has saved my butt a few times. Reason being, I've also seen a few threads which suggest you must remove this from your registry. Perform a quick scan firt. Then full later. I'm running one now and it's alredy found a couple (28) of issue from this "Relevant Knowledge Spyware."
    Also, this is how it was installed on my machine. I downloaded a "Free Flash Video Converter" from LEAWO.COM and installed their software. That's when it was placed onto my cpu. I can verify that 2 other machines in my office were infected when downloading this software from their company. Advice is to stay away http://www.leawo.com until they shape up. Their software was great though.
    Note: One employee when downloading, was prompted by her anti virus that something was amiss.

  • 500 INternal server error on making ajax call to method of Application page

    HI
    I have a application page that have a method in code behond ..i need to call this method on usercontrol using jquey on client side..when i ma makeing the call to method using $.Ajax({definiotion});
    then it gives me error 500 internal server error and this is coming only with the case when i am passing parameter to method usig javascript var object
    help me out on this... if required i wll upload the code also..
    regards
    Piyush
    piyush mishra

    This forum is for customization and programming of Microsoft Project - the project management scheduling product. 
    A quick search turned up:
    https://forum.jquery.com/
    I'd try there.

  • 500 internal server error when opening file attachment

    Hi all,
    I dont know whether im placing my query in the right place. if not pls advice.
    I have uploaded documents to content management from EP portal. The name of the attachment is stored in SAP custom table and the physical file is stored in EP->content management. When i go content mangement and click the attachment, im able to download the file in most cases. But for one employee, when i go content admin -> i can see the attached file name. when i try to open the attachment i am getting error message "500 Internal server error. Please contact your content admin".
    Any help will be appreciated.
    Thanks!
    Dhiya.

    Nope. The problem occurs with the admin user. HE is able to download attachments, but when he click one attachment he is getting "500 internal server error contact sys admin"
    the same thing happens when he tries to open in
    irj/km/docs/documents/attachmentfolder/attachmentfile.doc

  • What does 500 internal server error mean and how do i fix it???

    When I try and update my Producteev app it keeps telling me that I have a 500 internal server error! What does that mean and how do I fix it! I recently had to have my logic board replaced and my mac is only 3.5months old! I thought this thing wasn't suppose to be giving me problems like this!!! Please help!!!

    500 errors in the HTTP cycle
    Any client (e.g. your Web browser or our CheckUpDown robot) goes through the following cycle when it communicates with the Web server:
    Obtain an IP address from the IP name of the site (the site URL without the leading 'http://'). This lookup (conversion of IP name to IP address) is provided by domain name servers (DNSs).
    Open an IP socket connection to that IP address.
    Write an HTTP data stream through that socket.
    Receive an HTTP data stream back from the Web server in response. This data stream contains status codes whose values are determined by the HTTP protocol. Parse this data stream for status codes and other useful information.
    This error occurs in the final step above when the client receives an HTTP status code that it recognises as '500'. Frank Vipond. September 2010.
    Fixing 500 errors - general
    This error can only be resolved by fixes to the Web server software. It is not a client-side problem. It is up to the operators of the Web server site to locate and analyse the logs which should give further information about the error.
    Fixing 500 errors - CheckUpDown
    Please contact us (email preferred) whenever you encounter 500 errors on your CheckUpDown account. We then have to liaise with your ISP and the vendor of the Web server software so they can trace the exact reason for the error. Correcting the error may require recoding program logic for the Web server software, which could take some time.
    http://www.checkupdown.com/status/E500.html

  • Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error - I get this when I try to enter a record into one of our Access databases, what do I need to do to fix it, I don't know what it means

    Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error - I don't know what this means or how to fix it, I get it when I try to enter a ticket into one of our custom data bases in Access

    Apache Tomcat/4.0.4 - HTTP Status 500 - Internal Server Error - I don't know what this means or how to fix it, I get it when I try to enter a ticket into one of our custom data bases in Access

  • 500 - Internal Server Error - Table or View does not Exist

    When trying to use the sample restful service oracle.example.hr I get a 500 - Internal Server Error.
    I have no clue what to do next. I've even tried granting public to the emp table.  Nottin.
    Any insight you could give would be awesome.
    Here is the error:
    Request Path passes syntax validation
    Mapping request to database pool: PoolMap [_failed=false, _lastUpdate=-1, _pattern=null, _poolName=apex, _regex=null, _type=REGEX, _workspaceIdentifier=null, _serviceName=null]
    Applied database connection info
    Attempting to process with PL/SQL Gateway
    Not processed as PL/SQL Gateway request
    Attempting to process as a RESTful Service
    Determining if request can be dispatched as a Tenanted RESTful Service
    Request path has one path segment, continuing processing
    No Tenant Principal established yet, continuing processing
    APEX_LISTENER pool exists, continuing processing
    WebException [statusCode=500]
         at oracle.dbtools.rt.web.WebException.webException(WebException.java:343)
         at oracle.dbtools.rt.web.WebException.internalError(WebException.java:262)
         at oracle.dbtools.rt.web.WebErrorResponse.internalError(WebErrorResponse.java:101)
         at oracle.dbtools.rt.web.WebErrorResponse.error(WebErrorResponse.java:75)
         at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:166)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:184)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3732)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused by: JDBCException [kind=NO_DATA]
         at oracle.dbtools.common.jdbc.JDBCException.wrap(JDBCException.java:88)
         at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:41)
         at oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher.tenant(JDBCTenantDispatcher.java:104)
         at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:71)
         at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:37)
         at oracle.dbtools.rt.web.ReTargetingDispatcher.canDispatch(ReTargetingDispatcher.java:45)
         at oracle.dbtools.rt.web.RequestDispatchers.choose(RequestDispatchers.java:160)
         at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:75)
         at oracle.dbtools.rt.web.ETags.checkPrecondition(ETags.java:53)
         at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:426)
         at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:164)
         ... 14 more
    Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
         at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
         at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)
         at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)
         at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:208)
         at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:886)
         at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1175)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1288)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)
         at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3656)
         at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1495)
         at sun.reflect.GeneratedMethodAccessor70.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:111)
         at $Proxy104.executeQuery(Unknown Source)
         at oracle.dbtools.common.jdbc.JDBCQueryImpl.resultSet(JDBCQueryImpl.java:93)
         at oracle.dbtools.common.jdbc.JDBCResultRowIterator.<init>(JDBCResultRowIterator.java:28)
         at oracle.dbtools.common.jdbc.JDBCQueryImpl.execute(JDBCQueryImpl.java:53)
         at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:38)
         ... 23 more

    May be the default parsing schema in your Apex workspace cannot access table EMP. Try and qualify table EMP and grant access from containing schema to Apex parsing schema. Hope being helpful, regards.

  • XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error

    I'm getting this message in RWB when trying to send an order:
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
    Weird thing is, other orders have been successfully to the same partner.
    Is this something on my side or the receivers side?
    What does HTTP 500 Internal Server Error mean and how to fix?
    Thanks,
    Jeff

    More info on this problem:
    Discovered that the HTTP 500 error only occurs when a "change" file is sent:
    I send an order create file to a partner using a SOAP adapter. They receive it successfully.
    I make a change to the sales order and send that file. It uses the same Config Scenario, receiver determination, receiver agreement and comm. Channel.
    But this file shows an HTTP 500 error in the RWB.
    I send it right after the first order create file, so no overloading is happening, etc.
    Conenctivity to the url is fine because the create file went through.
    I don't know what else it could be. Any other info/log in RWB to look at to help decipher the error?

  • ACS version 4.0 SE - HTTP 500 internal server error

    When I try to authenticate (by SSL/HTTPS) to my ACS v4.0 SE with IE6.0 browser, I get a HTTP 500 internal server error. I already tried to restart all services, reboot the ACS appliance and delete and reimport my certificates. What can I do more? I need some advices from you. Best Regards.

    HTTP 500 is a server side error meaning that the process itself could of gone down. You might want to restart the daemon for ACS and if that does not work, you should post this in the Security forum since this is Network Management.

  • Error 500--Internal Server Error while opening a taskflow  in inline popup

    Hi,
    I am getting "Error 500--Internal Server Error" while opening a bounded taskflow as a popup from another bounded taskflow containing page fragments. The popup taskflow contains jspx pages. I even removed the jspx pages from the popup taskflow to check if the error is resulting from the bindings on the pages but still I get the same error. The entire stack trace of the error in the popup dialog is :
    Error 500--Internal Server Error
    oracle.adf.controller.ControllerException: ADFC-04008: The BindingContext on the session is null.
         at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
         at oracle.adfinternal.controller.util.model.AdfmUtil.getBindingContext(AdfmUtil.java:47)
         at oracle.adfinternal.controller.util.model.DCFrameImpl.makeCurrent(DCFrameImpl.java:125)
         at oracle.adfinternal.controller.state.ViewPortContextImpl.makeCurrent(ViewPortContextImpl.java:1006)
         at oracle.adfinternal.controller.state.RequestState.setCurrentViewPortContext(RequestState.java:159)
         at oracle.adfinternal.controller.state.ControllerState.setRequestState(ControllerState.java:900)
         at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:355)
         at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:105)
         at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
         at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
         at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:112)
         at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:59)
         at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:258)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Any help is greatly appreciated.
    Thanks,
    KK

    Hi Frank,
    Thanks for the reply. I am using it as an inline popup. I am trying to create command links dynamically in an iterator. When a link is clicked a popup window opens. The text of the link is passed to the popup window by creating a variable in the session scope ( I even tried request scope) by an action listener in the backing bean.
    I tried to create another simple application with a static command button which passes its text to popup window through a session scope variable. It worked fine. I am not sure why the same procedure is not working in my original application. Can you give me a hint what could possibly go wrong according the exception stack trace ?
    Thanks,
    KK

  • As2 receiver channel, SEEBURGER AS2: 500 Internal Server Error

    Hi,
    There is one scenario in our landscape, its running in production, Proxy to As2. The interface working fine for last 2 weeks, today its showing error in As2 receiver channel saying
    Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 500 Internal Server Error # , SEEBURGER AS2: 500 Internal Server Error #
    I have searched in forum, but couldnt get much idea on why this error encounters and how can we resolve it.
    Kindly provide your inputs to help me resolve this.
    Thanks,
    Ruchi

    Hi Ruchi,
    500 means the requested server does not understand the request (the requested service is unknown). The reason is obvisiously outside of PI. You have to contact the 3rd party owner and ask why the system is refusing the request instead of responsing like before.
    Regards,
    Udo

  • EBS 12.1.3 - 500 Internal Server Error - after using FNDCPASS to change SYSADMIN password

    Hello Guys,
    We are running ebs 12.1.3 on OEL6. Upon logon today I was a prompt to chage the sysadmin's password. I ended using FNDCPASS for a successful change:
    FNDCPASS apps/apps 0 Y system/xxxxx USER SYSADMIN xxxxx
    Since then I have been unable to connect into the apps with its URL - I am getting
    "500 Internal Server Error" Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
    Apache logs have some errors:
    cd $LOG_HOME/ora/10.1.3/Apache
    more error_log.1406246400
    [Fri Jul 25 06:18:18 2014] [error] [client 10.1.101.81] [ecid: 1406283498:10.1.100.43:32121:0:390,0] File does not exist: /u02/app
    lfind/inst/apps/OFD1_ofindev01/portal/favicon.ico
    [Fri Jul 25 06:18:19 2014] [error] [client 10.1.101.81] [ecid: 1406283499:10.1.100.43:4002:0:505,0] mod_oc4j: Failed to find a failover oc4j process for session request for destination: application://oacore (no island or jgroup).
    [Fri Jul 25 06:18:20 2014] [error] [client 10.1.101.81] [ecid: 1406283500:10.1.100.43:4005:0:476,0] mod_oc4j: Failed to find a failover oc4j process for session request for destination: application://oacore (no island or jgroup).
    [Fri Jul 25 06:23:21 2014] [warn] [client 10.1.101.81] oc4j_socket_recvfull timed out
    [Fri Jul 25 06:23:21 2014] [warn] [client 10.1.101.81] oc4j_socket_recvfull timed out
    [Fri Jul 25 06:23:21 2014] [error] [client 10.1.101.81] [ecid: 1406283500:10.1.100.43:4005:0:476,0] mod_oc4j: request to OC4J ofind
    I have " perl $FND_TOP/patch/115/bin/ojspCompile.pl --compile --flush -p 2 " and executed cmclean.sql but problem persist.
    What am I missing?
    Thanks
    Mathias

    ./adoacorectl.sh start
    07/28/14-15:00:39 :: adoacorectl.sh version 120.13
    07/28/14-15:00:39 :: adoacorectl.sh: starting OPMN if it is not running
    opmnctl: opmn is already running.
    07/28/14-15:00:39 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance 
    opmnctl: starting opmn managed processes...
    07/28/14-15:00:49 :: adoacorectl.sh: exiting with status 0
    Hussein,
    adopmnctl.sh status
    You are running adopmnctl.sh version 120.6.12010000.5
    Checking status of OPMN managed processes...
    Processes in Instance: OFD1_ofindev01.ofindev01.corp.phillips.com
    ---------------------------------+--------------------+---------+---------
    ias-component                    | process-type       |     pid | status 
    ---------------------------------+--------------------+---------+---------
    OC4JGroup:default_group          | OC4J:oafm          |   15235 | Alive  
    OC4JGroup:default_group          | OC4J:forms         |   15161 | Alive  
    OC4JGroup:default_group          | OC4J:oacore        |   23949 | Alive  
    HTTP_Server                      | HTTP_Server        |   14941 | Alive  
    FNDCPASS was run successfully. -
    I used:
    FNDCPASS apps/apps 0 Y system/sys USER SYSADMIN julyxxxxx
    more L7423781.log
    +---------------------------------------------------------------------------+
    Application Object Library: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    module:
    +---------------------------------------------------------------------------+
    Current system time is 24-JUL-2014 10:19:05
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Concurrent request completed successfully
    Current system time is 24-JUL-2014 10:19:05
    +---------------------------------------------------------------------------
    Appache logs:
    more access_log.1406505600 log
    127.0.0.1 - - [28/Jul/2014:15:03:50 -0400] "HEAD  /index.html HTTP/1.1" 200 0 0 "-" "-"
    10.1.101.81 - - [28/Jul/2014:15:03:54 -0400] "GET /OA_HTML/AppsLogin HTTP/1.1" 500 304 137 "-" "Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.2; WOW64; Trident/6.0)"
    10.1.101.81 - - [28/Jul/2014:15:03:54 -0400] "GET /OA_HTML/AppsLogin HTTP/1.1" 500 304 136 "http://ofindev01.corp.phillips.com:8006/" "Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.2; WOW64; Trident/6.0)"
    10.1.101.81 - - [28/Jul/2014:15:03:54 -0400] "GET /OA_HTML/AppsLogin HTTP/1.1" 500 304 125 "http://ofindev01.corp.phillips.com:8006/" "Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.2; WOW64; Trident/6.0)"
    127.0.0.1 - - [28/Jul/2014:15:04:10 -0400] "HEAD  /index.html HTTP/1.1" 200 0 0 "-" "-"
    more error_log.1406505600:
    [Mon Jul 28 08:53:32 2014] [error] [client 10.1.101.81] [ecid: 1406552012:10.1.100.43:2557:0:17,0] File does not exist: /u02/applfind/inst/apps/OFD1_ofindev01/portal/favicon.ico
    [Mon Jul 28 11:55:55 2014] [error] [client 10.1.100.43] [ecid: 1406562955:10.1.100.43:2487:0:27,0] File does not exist: /u02/applfind/inst/apps/OFD1_ofindev01/portal/favicon.ico
    [Mon Jul 28 12:30:01 2014] [error] [client 10.1.101.81] [ecid: 1406565001:10.1.100.43:948:0:37,0] File does not exist: /u02/applfind/inst/apps/OFD1_ofindev01/portal/favicon.ico
    [Mon Jul 28 12:30:44 2014] [error] [client 10.1.100.46] [ecid: 1406565044:10.1.100.43:2557:0:34,0] File does not exist: /u02/applfind/inst/apps/OFD1_ofindev01/portal/favicon.ico
    [Mon Jul 28 13:03:30 2014] [notice]  configured -- resuming normal operations
    [Mon Jul 28 13:03:30 2014] [notice] Accept mutex: fcntl (Default: fcntl)
    This system was working find until when I changed the password using FNDCPASS apps/apps 0 Y system/sys USER SYSADMIN julyxxxxx
    Thanks
    Mathias

Maybe you are looking for

  • Clearing of impersonal account items

    Hello, how can I clear impersonal account items vs. another impersonal account? Is it possible with FB05 in RFBIBL00? Regards Norbert

  • Config Sample Adapter as SENDER & RECEIVER

    Hi there! I have a problem when I try to use the sample adapter as sender and receiver. If I use it only as receiver and the sender is the fileAdapter it works fine... The sample adapter is deployed, it's metaData is imported. But it is only able to

  • Nepomuk/Strigi: id3v2 tags are not indexed

    I'm using nepomuk to index my music collection, but I noticed that the id3v2 tags are not indexed: dolphin does not show the information from the tags neither do bangarang. However, id3v1 tags are present. I don't know where to look at in order to fi

  • Introspecting import statements

    Sir How to introspect import statements of the input class.

  • Need to know how to provide access to it admins based on RBAC on a file server.

    Hi , I am not a having a good knowledge in file server so if anything is wrong please correct me . Level 3 admin : I just wanted my level 3 admins need to provide a full permission and to do a changes on all the files and folders. Level 2 admin : I j