What does it mean: Error -36?.

Appears when I'm opening files from an AFP server.
The file has all permissions ok.
Thanks!. (And sorry for my english, well, Google Translate english).
Nacho

I received this error message when attempting to mount a volume on a 10.6.8 MacMini using an iBook running 10.2.8. I checked the options and everything seemed correct: the ethernet was working correctly on both computers, AppleTalk was active on both, and File Sharing was enabled on the MacMini. I had successfully connected these computers earlier in the day. I also noticed that if I selected Go > Connect to Server... in the Finder that none of the computers on my network would appear.
On the system attempting to connect (e.g. the iBook running 10.2.8) I went in the System Preferences, Network and selected the AppleTalk tab. I disabled AppleTalk and applied the changes then waited a few seconds, enabled AppleTalk, and applied the changes. When I selected Go > Connect to Server... in the Finder, my computers reappeared and I was able to connect to the system.
Although I don't have an explanation for the error, this was something that worked for me. I hope it helps you.

Similar Messages

What does it mean error code -42110?

what does it mean error code -42110?

Try this user tip:
https://discussions.apple.com/docs/DOC-4831
Hope that helps.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

What does it mean error 3194? i tried to download the 4.2, from 4.0

what does it mean error 3194? i tried to download the 4.2, from 4.0

It means your phone has been hacked or jailbroken or the computer you're using was used to hack or jailbreak a phone previously.
Try Google.

Hello .. I lost my passcode on the iPhone .. and worked his recovery .. in case of recovery shows me error 3004 .. What does this mean error? Please help

Hello .. I lost my passcode on the iPhone 5s 16 gb .. and worked his recovery .. in case of recovery shows me error 3004 .. What does this mean error? Please help

See Resolve iOS update and restore errors - Apple Support for possible resolutions.

TS3694 WHAT DOES IT MEAN ERROR 1015

WHAT DOES IT MEAN ERROR 1015 ?

You can't. Error 1015 occurs when trying to restore a jailbroken phone. Your phone is permanently disabled. You will need to buy a new phone.

What does it mean: Error Message "Low system resources" ?

Hi,
we are using CR out of Visual Studio 2005 and 2008 for a PDF export.
We are able to start a report process and can see on the load of the process that the report seems to be generated, but we didn't received a report PDF file.
We add the following Registry key (depending on CR version) to get log files:
For 10.5: HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Report Application SErver\Server\
For 10.2: HKEY_LOCAL_MACHINE\SOFTWARE\Crystal Decisions\Report Application SErver\Server\
and got the following error message:
ErrorLog 2010 3 1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp" LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
Error formatting Field Object.
Failed to export the report.
Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
Low system resources.."
ErrorLog 2010 3 1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp" LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
Error formatting Field Object.
Failed to export the report.
Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
Low system resources.."
Maybe do you have any suggestions what the problem could be? What does it mean with "Low system ressources"? There should be enough memory, hard disc size and cpu power on the machine.
Please let me know if you need any further information.
Thank you very much for your help in advance!!
Best regards,
Matthias

Re logging. What I was referring was the following in your post:
We add the following Registry key (depending on CR version) to get log files:
ErrorLog 2010 3 1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp"; LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
Error formatting Field Object.
Failed to export the report.
Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
Low system resources.."
ErrorLog 2010 3 1 23:55:15.293 5576 7304 (..\reporthandler.cpp:11256): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"..\reporthandler.cpp"; LineNum:11252 ErrorCode:568 ErrorMsg:"There are not enough free System Resources to perform this operation.
Error formatting Field Object.
Failed to export the report
Error in File e:\ReportTemp\serviceusage {8F9A2AEB-96BB-400F-AB88-47E09C916B67}.rpt:
Low system resources..".
I think we want to back up a bit here. I am not sure what "Low System Resources" means or what it's about. So, let's try the following:
1) Are you able to export to any other format?
2) Are you able to print to printer?
3) Try a new simple app and add a viewer to the form. See if export from the viewer export button works.
4) In the above new app, export to CR report format from the export button on the viewer toolbar.
5) If you are able to get an exported rpt file, it will have saved data with it. Run that report in your original app (comment out any db logon code). Can you export a saved data report?
6) Make sure you have read / write permissions on the win\temp directory
7) What database are you connecting to and what is the database connection method (OLE DB, ODBC, etc.)
Ludek

What does it mean "error -43"?

when i try to delete some folders from my external hd, appar this message: you can't..... code error -43. anybody know what does it mean? please!!!!
how can I fix it?

You didn't say what format your ext HDD is in...
You can try removing it in Terminal, but you need to know how, and you need to know the full path to the folder.
If you are comfortable doing so, open Terminal in Applications -> Utilities and run this:
sudo rm -r /Volumes/NAME_OF_EXT_HDD/NAME_OF_FOLDER
then type in your admin password

How to sing in into icloud? What does it mean error 403?

How can i sing in into icloud it says error 403 what does it mean? What is the solution for this problem? Waiting for an aswer please!

Well, I admit that I am new with the iCloud and iPhone, but I would not know how to set up "Forwarding" The email shows the intended recipients email address. It does not show any other recipient that it could be forwarded to. But I just tested by emailing another of my accounts. then I opened the email I just sent and "Forwarded" it to another and that arrow showed up on the sent email. Funny thing is I can't remember forwarding the one I was asking about on here. Well Thanks

What does this mean: error occurred while restoring this iphone (-35)?

What does it mean when you are attempting to restore a phone and you get this message: error occurred while restoring this iphone (-35)

http://support.apple.com/kb/TS3694#error35

Would you guys tell me what does it mean error 1015

i have iphone 3G and i can put him a system so please guys help me what can i do it says error 1015

It means your phone is jailbroken or was jailbroken in the past. It means you have no warranty and you can not get support, either through Apple or on these forums.

What does this mean: ERROR! Shared library ioser12 could not be found.

Hi all,
I am trying to establisch a JDBC connection to a MaxDB database (former SapDB).
I have a win2k system with jdk 1.4.2_01 installed.
I have the JDBC connection working in the sense that i am able to execute SQL scripts by ant tasks,
so far i think that everything is properly configured.
Nevertheless, when i try to use the connection in my own class (a JUnit testcase), i get this message:
"ERROR! Shared library ioser12 could not be found."
The program then continues, and i get sql error messages that the user is still connected. I think these are followups from the first one - one testcase may be broken by this error, but the connection is not closed.
I searched the web to find what i could do against it. I found some forum discussions about this problem and hence i tried to set my path and classpath to locations where the isoser12.dll is located (runtime environment/bin), and finally copied it to the windows/system32 dir.
Nothing made this error disappear. I am still stuck with this one since two days.
Btw, the same testcases work well with other databases like oracle or db2.
Hence, i am calling to you for some ideas about this error.
Thank you in advance for help,
Andreas Schroeder

Hi Andreas,
I am also interested in making maxdb(sapdb) work with S1 application server. I would appreciate if you could let me know if you are able to make it work with S1 V8 server.
Thanks,
Gorton Zhao
Hi all,
I am trying to establisch a JDBC connection to a MaxDB
database (former SapDB).
I have a win2k system with jdk 1.4.2_01 installed.
I have the JDBC connection working in the sense that i
am able to execute SQL scripts by ant tasks,
so far i think that everything is properly configured.
Nevertheless, when i try to use the connection in my
own class (a JUnit testcase), i get this message:
"ERROR! Shared library ioser12 could not be found."
The program then continues, and i get sql error
messages that the user is still connected. I think
these are followups from the first one - one testcase
may be broken by this error, but the connection is not
closed.
I searched the web to find what i could do against it.
I found some forum discussions about this problem and
hence i tried to set my path and classpath to
locations where the isoser12.dll is located (runtime
environment/bin), and finally copied it to the
windows/system32 dir.
Nothing made this error disappear. I am still stuck
with this one since two days.
Btw, the same testcases work well with other databases
like oracle or db2.
Hence, i am calling to you for some ideas about this
error.
Thank you in advance for help,
Andreas Schroeder

What does this mean error code u44m1i210 elements 13

I bought this over the internet and downloaded. I works but it says it has a update, so I started the update gets all the way through and end it gives me an error. I tried this 4 times. I printed the error code telling me to try again later. The last error code U44M1I210....This Elements 13

Bob,
I am getting eerror 34506 followed by Multiplexing error when I answer OK to the 34506 error.
At what point in the process?
I am loading old VHS tapes into IMovieHD, editing them, then sharing them to IDVD.
Do you have chapter markers? If so:
Make sure no chapter markers are within two seconds of the start or end of the timeline. Make sure no chapter markers are within a transition. Make sure no chapter markers are within two seconds of the end of a transition.
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Help what does this mean ERROR ITMS-9000: "OEBPS/package.opf(23)

Hi All - I am getting this error message -
ERROR ITMS-9000: "OEBPS/package.opf(23): element "guide" not allowed here; expected the element end-tag or element "item"" at Book (MZItmspBookPackage)
- when I try to upload my epub to the Apple bookstore. I have already fixed one error but I dont know where to start on this one so any help would be appreciated. - Kind Regards David

Javascript isn't Java. You may find another forum that's specifically about Javascript will be of more help.
You should also check for support from whoever makes the software package you're using.
I realize this isn't much help, but I advise avoiding Javascript-centric web designs because they tend to lead to the exact sort of problem you're having. The next time you rework your site, shun Javascript, I say.

Error 21 what does it mean, error 21 what does it mean

im trying to restore my iphone 4 but it will not let me im getting an error code of 21 can anyone help me

iOS: Resolving update and restore alert messages

What does it mean error 9808?

I can't connect to Itune store in Itune!! I try to install and uninstall it 2 to 3 times already!! But it's still have the problem!! Anyone can help?

http://support.apple.com/kb/TS2753

What does it mean: Error -36?.

Similar Messages

Maybe you are looking for