What does it mean on an ipad2 when the lock icon beside the signal strength comes on and off?

What does it mean on an ipad2 when the lock icon beside the signal strength comes on and off, and an intermittant lock appears on the left beside the SSID name?
I am trying to connect to a Cisco network, and even though the SSID is open authentication the ipad will either say it cannot connect or ask for the password.

That's a "resize" arrow. Try relaunching Finder (Cmd+Opt+Esc) or >Force Quit

Similar Messages

  • What does the lock icon on the iPod Touch in the upper right corner mean?

    Wbat does the lock icon in the upper right corner of the iPod Touch mean?
    How is it used?

    That means your iPod is locked, or will not rotate the screen when you rotate your iDevice. To turn it off, you double-tap the home button, swipe to the right and you'll see the same icon, but bigger. Tap that.
    That's all! Simple as 123!

  • Given filename or path contains Unicode or double-byte characters.Retry using ASCII characters for filename and path What does this mean? it happen when I publish an OAM

    Given file name or path contains Unicode or double-byte characters. Retry using ASCII characters for filename and path
    What does this mean? It is happening when I try to publish an OAM for Dreamweaver.
    Also: How can I specify the browser in Edge Animate? It is just going wherever. Are there no Preferences for Edge Animate?
    BTW. Just call it Edge. Seriously. Do you call it Illustrator Draw? Photoshop Retouching?

    No, my file name is mainContent.oam
    My project name is mainContent.an
    This error happens when I try to import into Dreamweaver. Sorry, I wasn't clear on that earlier.
    I thought maybe it was because I had saved my image as a png. So re-saved as a svg, still get the error.
    DO I have a setting is Dreamweaver CC that is wrong? Should I try this in Dreamweaver CS6? I might try that next.
    Why is this program so difficult? I know Flash. I know After Effects. I can work the timeline part just great. It's always in the export that I have problems.
    On a MacPro, 10.7.
    Are you an Adobe person or just a nice helper?

  • I want a song i purchased on ipad with my apple id transferred to our family computer which is registered to my husbands apple id. But a message comes up saying 90days before can download? What does this mean i just want to play my song through the mac

    I want a song purchased on my ipad with my apple id downloaded onto our home mac mini. So i can listen to it via that computer. However the mac is registered to my husbands apple id and it comes up with a message about 90days wait needed or something. What does this mean? And how do I get one measly song downloaded?!

    Welcome to the Apple Community.
    It sounds like you are trying to change your login in the Tunes store through iTunes on your computer, which you can only do once in 90 days, which you don't need to do for this.
    What does your iPad usually sync with.

  • Where does it go when you click on the Calendar icon beside the date field?

    Hi,
    Does anybody know what page or region does it go when you click on the Calendar icon beside a date field? I need to know how it generates the list of values for year.
    Need your help. ASAP. If you need to know more about my inquiry please email me, [email protected]
    Thanks.

    It's a Date bean and it is UIX which generates the java script to pop open the dialog box and the UI. I donot think there will be any public document available on the implementation.

  • What happened to the lock icon at the bottom right hand corner?

    When I would order items on line, I would see this lock icon at the bottom right hand corner of the window. I thought it meant the site was secure. Now I just see the fox head icon. I don't know if it's secure. Is it?
    Nothing is wrong with firefox, but I don't know if this feature has been removed or moved elsewhere. It provided some sense of comfort seeing the lock icon on sites where I was ordering items.

    In Firefox 4 and later you no longer have the Status bar that showed the padlock in previous Firefox versions.<br />
    The padlock only shows that there is a secure connection and doesn't guarantee that you are connected to the right server.<br />
    So you might still be connected to the wrong server if you make a typo in the URL and someone has claimed that mistyped URL.<br />
    The functionality of the padlock has been replaced by the [[Site Identity Button]] on the left end of the location bar.<br />
    See also:
    * http://www.dria.org/wordpress/archives/2008/05/06/635/
    * https://support.mozilla.com/kb/Site+Identity+Button
    You can use this extension to get a padlock on the location bar.
    *Padlock: https://addons.mozilla.org/firefox/addon/padlock-icon/

  • I am not getting the "Lock" icon on the tool bar when using my banking site.

    Why is the "Lock" icon not showing when I am on a secured site?

    Site identity is fine; it confirms I am where I think I am. The padlock is a global standard for a secure connection. Please bring it back.

  • What does it mean when the dialogue box that pops up when you want to bookmark a site says " Remove 3 bookmarks?"

    Using Firefox 17.0. When I click on "Bookmark a Page" under the star in the dialogue box that appears it may say "Remove Bookmark" or "Remove 3 bookmarks." What does it mean - will it really remove three bookmarks?

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • HT5293 what does it mean if this pops up when getting on a network. it read, unable to join due to another device is using this ip address.

    what does it mean when the message , "can not join network due to another device using this ip address?"

    Most likely, you're getting a network address from your router. The address assignment ("lease") expires, and has to be renewed, after a certain amount of time, which might be one hour or one day. The lease expired without being renewed because the device was offline at the time. Meanwhile, the address was leased to another device on the network. When the first device comes back online, it still has the address that's now also leased to the second device. Depending on what kind of router you have, the conflict may resolve itself automatically. If not, then from the menu bar, select
     ▹ System Preferences ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the TCP/IP tab. Now look at the menu labeled Configure IPv4. If the selection in that menu is Using DHCP, click the button labeled Renew DHCP Lease. Test.
    Less likely, you have a network address that you assigned yourself, and another device is assigning itself the same address. In that case, the selection in the Configure IPv4 menu will be either Manually or Using DHCP with manual address. This kind of conflict won't be resolved automatically. You have the following options to resolve it:
    Change the menu selection to Using DHCP.
    Change the manually-assigned address to one that isn't being used by another device.
    Change the address of the other device.  
    Which of these options you should choose depends on the details of why you're using a static IP address. Any change you make to the network settings must be applied before it takes effect. To do that, click OK and then Apply.

  • What does it mean when my iphone says sim not compatible?, what does it mean when my iphone says sim not compatible?

    I've recently bought an iPhone and got my phone number switched over to a micro sim card.. But when i try to set the iPhone up it keeps saying Sim card not compatible. What does this mean?

    Your iphone is liely locked to a carrier.
    You would need a SIM card from that carrier or you would have to ask that carrier of they unlock iphones and if you qualify.

  • What does it mean when there's a picture of a lock with an arrow going around it? (it's showing up next to the battery life %)

    this pic of a lock with an arrow going around it popped up today. what does it mean???? It is located on the top of my iphone next to the battery life percentage. Help??!

    This is covered in the manual.  it explains all the icons.
    Have a look:
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • "Orphan Timeline" & "End Action Not Set." What does this mean????

    I am setting up a Blu-Ray DVD in Encore. I have a project on a Premiere Pro CS 5.5 Timeline, which is 2 and a half hours long with 24 Encore chapters in it. I have not yet Encoded it in Media Encoder as of yet.
    I am setting up all my menus and buttons in Encore so all I have to do is link the buttons to them main project when I do encode it and then I can just Check it and Burn it.
    I did check my project just now though and all buttons came up with 2 Errors:
    1) Orphan Timeline
    2) End action not set.
    1) "Orphan Timeline", I assume that means that the button is not linked to any timeline as of yet, correct? (This would be true because there is no main project timeline in there yet.)
    2) "End action not set." What does this mean? Will this go away once I add my whole project into Encore and I link up all of the buttons to the timeline?
    Thanks in advance
    Premiere Pro CS 5.5
    Encore 5.5
    Media Encoder 5

    1) Orphan Timeline
    2) End action not set.
    Both of these suggest that you created a timeline in the Encore project, perhaps with no "asset" in it.
    Yes, ignore both messages for now. But I prefer creating the timeline after, or along with, importing the asset into the Encore project.
    If you believe you have not created a timeline, post a screenshot of your "flowchart."

  • TS4268 What does it mean 'This person cannot be reached by iMessage at this time'?

    I have iMessage to my friend successfully before.  But yesterday when I tried to iMessage him again, these words appear 'This person cannot be reached by iMessage at this time?  What does it mean?

    Thanks for this thread.  I had the problem too.  It was very frustrating because he's overseas and we iMessage a few times per week.
    The reason it was broken: the specific contact had changed his AppleID password and had not updated it on his iPhone. 
    The solution that worked for us:
    He reset his AppleID (c.f.: http://support.apple.com/kb/ht5624)
    He updated the password at iPhone (iOS7) >> Settings >> Messages
    He updated the password at iPhone >> Settings >> FaceTime
    I reset my network settings: my iPhone (iOS7) >> Settings >> General >> Reset >> Reset Network Settings
    He didn't have to reset his network settings, and neither of us powered our iPhones off/on.

  • Ip being used by another device? What does that mean?

    An error message popped up saying another device has been using my ip address. What exactly does this mean, and how can I fix this? Please help.

    Do you have another computer, iPhone/Pad/Pod? This is usually no problem.
    Usually if you enable your router for Automatic (DHCP) IP address distribution, your device's IP address on your local area network will change without you knowing.
    By Linc Davis
    Most likely, you're getting a network address from your router. The address assignment ("lease") expires, and has to be renewed, after a certain amount of time, which might be one hour or one day. The lease expired without being renewed because the device was offline at the time. Meanwhile, the address was leased to another device on the network. When the first device comes back online, it still has the address that's now also leased to the second device. Depending on what kind of router you have, the conflict may resolve itself automatically. If not, then from the menu bar, select
     ▹ System Preferences ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the TCP/IP tab. Now look at the menu labeled Configure IPv4. If the selection in that menu is Using DHCP, click the button labeled Renew DHCP Lease. Test.
    Less likely, you have a network address that you assigned yourself, and another device is assigning itself the same address. In that case, the selection in the Configure IPv4 menu will be either Manually or Using DHCP with manual address. This kind of conflict won't be resolved automatically. You have the following options to resolve it:
    Change the menu selection to Using DHCP.
    Change the manually-assigned address to one that isn't being used by another device.
    Change the address of the other device.  
    Which of these options you should choose depends on the details of why you're using a static IP address. Any change you make to the network settings must be applied before it takes effect. To do that, click OK and then Apply.
    This happens to me all the time and has never been a problem.

  • NI Visa interface IO returns BFFF003D in red. what does this mean?

    Greetings,
    I'm attempting to communicate with a RAW device using NI-VISA USB.  Device connects okay.  When I attempt to use Interface IO, the response is BFFF003D.  What does this mean?  Why is it in red?
    Craig

    Craig,
    The code you have specified appears to be a VISA error: Invalid buffer mask specified.  You may want to check this link for more information on this error.
    http://digital.ni.com/public.nsf/websearch/AD03F1520934D67F86256D4B001DC2CE?OpenDocument
    If you have more questions, please post some more specifics about your application.
    Little A

Maybe you are looking for