What does it mean when addressees are red highlighted?

When I go to select adressees I get some redhighlighted and they stay that way

One of two things
If you have not updated to Version 31 it means that the address is not in one of your address books
If you are on Version 31 it shows how bad they broke the address book.
I have not updated to v31 because of all the problems with it so I cannot tell you if they have fixed this bug yet.

Similar Messages

  • What does it mean when you are signed in as a guest on a wi fi network?

    My sister is in the hospital and would like to use her ipad.  The only network that lets her sign in is guest network and it doesnt let her get much of anything.  What does guest network mean?

    A "guest" network is typically for visitors to use free of charge, as opposed to a "private" network that employees use by entering a special password.
    The administrator that set up the guest network controls what guests can access, so it would not be possible to say what you can and cannot do on the guest network.
    It might allow an Internet connection, or only email for example. Ask for a guide to the network from a supervisor on the floor for more details.
    If there are too many users trying to use the network at the same time, connections may be very slow, or may not work.

  • What does it mean when there pink vertical lines on the start up screen?

    What does it mean when there are pink vertical lines on the start up screen on an IMac ?

    It means you have a hardware problem. That could be the screen itself or the graphics system, GPU.

  • What does it mean when it says "ipad has lost it's pairing"

    what does it mean when it says "ipad has lost it's pairing"

    If you are getting that message when you try to sync your iPad, eject the iPad, quit iTunes, restart your computer, reset the iPad and then try to sync again.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that doesn't work, just try using a different USB port.

  • HT4199 What does it mean when I click on my wifi name and the bars come up but the network keeps thinking and the ipad says safari cannot open the page because it is not connected to the internet. ?

    What does it mean when I click on my wifi name and it show I'm on my wifi, but the network keeps thinking and the ipad says, Safari cannot open this page because it is not connected to the internet. ?

    When you click on the WiFi network name, have you also provided the password for accessing the network?  You should get a dialogue box asking you for the security information the first time you connect.
    If you are not able to connect, you might want to go to Settings > General > Reset > Reset network settings.
    Then go back to Settings > WiFi and select your network name again and make sure the security information is now entered correctly.
    If you still cannot connect, power down the router, wait a few minutes, power up the router, with the iPad powered down the whole time, and after the router has had several minutes to stabilize power up the iPad.  See if it now connects correctly.

  • What does it mean when your whole i phone screen turns green

    What does it mean when your whole iphone 5 screen turns green

    It means that you jailbroke your iPhone with redsn0w. There are several known methods to fixing this issue:
    1. Plug it into your computer and restore
    2. Plug it into your computer, then hold the power button for about 6 seconds
    3. Hold the power button and the home button to restart it. As soon as it turns on, plug it into your computer and wait
    4. Time. Sometimes it fixes itself over time.
    I would suggest refraining from jailbreaking your device next time. I know it tempting to do so, but if you want to root your phone or play with emulators, I would suggest an android device. Btw, iOS 7 looks promising for the Apple community. Keep your ears peeled this week during WWDC.

  • When trying to do a system backup to my remote LaCie hard drive, what does it mean when I get a message that says "waiting for volume LaCie disk"?  While this message apears no back-up occurs.  Is there a setting I need to change?

    When trying to do a system backup to my remote LaCie hard drive, what does it mean when I get a message that says "waiting for volume LaCie disk"?  While this message apears no back-up occurs.  Is there a setting I need to change?

    You can't do a backup of icloud to an external drive.  In fact, does your post have anything to do with icloud (you're in the icloud forum)?
    What kind of "system backup" are you doing?  Are you using Time Machine?

  • What does it mean when I see the file with the question mark on my screen?

    What does it mean when I see a file with a question mark on the screen?

    Means no bootable system can be found or required system files are missing or damaged. Reinstall OS X.
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • What does it mean when you get a "The iTunes library file cannot be saved. There is not enought memory available." ? And what can I do to correct it?

    What does it mean when you get a "The iTunes library file cannot be saved. There is not enought memory available." ? And what can I do to correct it?

    Well, I installed the latest iTunes this AM, works perfectly.  Although for some reason it did lock up after playing a song today.
    Horror stories?  That's a bit overly dramatic.
    No, it isn't.
    The issue you are experiencing is one that has occurred in multiple versions of iTunes, a simple search would have revealed this.
    A simple search was conducted, no one seemed to have an answer.  Do you always adopt such a haughty attitude?  Or was I just lucky.

  • What does it mean when there is a flashing file folder with a question mark when trying to start computer?

    When I try to start my computer a flashing file folder with a question mark is on the screen. I can't open anything up. What does this mean?

    There are four general causes of this issue:
    1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
    2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
    3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
    4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from its location.
    (104258)

  • What does it mean when I keep getting the following message:  Cannot open Page:  Safari could not open the page because the server stopped responding"  I have it connected to my wifi, have 3 strong bars,but the circle just keeps going around.

    What does it mean when I keep getting the following message on my IPad2:

    Usually it's because you are not making internet connection via wifi.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Angel Season 5 -- what does it mean when it says "repackage"?

    For some reason there are two versions of Angel Season 5 listed and only one of them is on sale.  The one that is on sale says "repackage" in the product title and I was wondering if that meant that it was used, or if maybe it just meant different packaging.  So, what does it mean when it says "repackage"?
    This is the page I was looking at http://www.bestbuy.com/site/olspage.jsp?skuId=8014631&productCategoryId=cat02564&type=product&id=1568268
    Thanks!
    Heather

    Hey Heather -
    The only difference in those two skus is the actual packaging.  One is a thicker package (older one) and one is a thinner packaging (newer one).  You should be able to receive the sale price on either. 
    I hope this helps!
    Dorothy
    Community Connector
    Best Buy® Corporate
    Dorothy|Social Media Supervisor | Best Buy® Corporate
     Private Message

  • HT201299 what does it mean when you get this message on the Iphone? "online maps consume data traffic"

    what does it mean when you get this message on the Iphone? "online maps consume data traffic"

    That means that if you use online maps, it will consume data. If you're on WiFi, no worries. If you are on cellular data, then it will eat into your cellular data plan.

  • What does it mean when you receive a text on your iphone 6 form your own number and the message is duplicated on each side (sent/recieved) and has "verizon message" with a long number at the end of the text, duplicated as well?

    what does it mean when you receive a text on your iphone 6 from your own number and the message is duplicated on each side (sent/received) and has "verizon message" with a long number at the end of the text, duplicated as well?

        Great question stacybrownie! Let's get to the bottom of this so that it's not a cause for concern. When a message is sent to/from your own number, it will display as one sent, one received. This makes it display two messages as you are seeing. Let's clarify the second part of your question. Where do you see "Verizon Message" exactly? What is the long number at the end of the text? When did this start and is it with all text messages or only this instance?
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • What does it means when you turn on the macbook and a file with a "?" mark flashes?

    What does it means when you turn on the macbook and a file with a "?" mark flashes?

    It usually means some system files are missing or corrupted. Reinstalling OS X is the fix:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Maybe you are looking for

  • Saving plain text on a mac (Keyboard shortcuts file)

    Hi there perhaps some mac users can help me... I am manually editing the keyboard shortcuts file in TEXT edit on a mac (Im a pc user). I open the file as plain text  all the rich text stuff turned off. (Looked up how to do this.) I edit one of the sh

  • How do I get .csv file of Contacts on iPhone?

    I am new to iTunes, but am told I can "easily" load a file of phone contact numbers via iTunes to my new (replacement) iPhone.  All I see are music files, video files, but can't find a way to even get my contact file into the iTunes library to be abl

  • Using swing on j#

    i konw there have been programs to use swing on j++, but how about on its upgrade, j#? anyone know if there is a way or there is something in the makes or if there is any way to take the javax package and put it into the j# program file any solutions

  • IPhoto 08 not updating videos deleted from iMovie 08

    Been an iPhoto user for years. During that time I've accumulated hundreds of short video clips taken in the movie mode of my various still cameras. Good stuff but it's always been hard to look at them, until now. iMovie 08 makes it very simple but I'

  • My computer thinks I am not in the UK when I go onto net via Firefox - can I change this?

    My computer at work thinks I am not in the UK - my home computer is fine. I have tried to get on 'Scrabble' on facebook and also the National lottery. I can access both through Internet Explorer - but not Firefox. Why?