What does it mean when my ipad says it is disabled and I need to connect to itunes

Okay, so, I just got an ipad yesterday and when I got to work today it said " ipad is disabled, please connect to itunes", but it will not allow me to connect because I have a password. Anyone have a solution?

If it is disabled it must be restored.
Read:
http://support.apple.com/kb/HT1212
and
http://support.apple.com/kb/ht1808
This is not normal for a new iPad.

Similar Messages

  • IPad says it is disabled and I need to connect to iTunes but when I try to connect it says to enter password for ipad

    My ipad says its disabled and need to connect to itunes but is says to enter password which I don't have because of my kids.  How can I reset the i[pad

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it

  • HT201412 MY IPAD SAYS IT IS DISABLED AND I NEED TO CONNECT TO ITUNES...I HAVE NOT USED IT IN A WHILE. HELP!

    Help, please

    You have to restore the device with iTunes on your computer. There is no other way around this now. This will explain to you how to restore.
    http://support.apple.com/kb/ht1414
    Pay attention to the last part of the article about using recovery mode. You may need it.

  • What does it mean if your IPad says that it has been "disabled?"  How to I fix it and is it serious?

    What does it mean when an IPad says it has been "disabled?"  How do I get it to work again, etc.?  Is this an indication of some kind of damage to device and how would it happen?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT4199 What does it mean when I click on my wifi name and the bars come up but the network keeps thinking and the ipad says safari cannot open the page because it is not connected to the internet. ?

    What does it mean when I click on my wifi name and it show I'm on my wifi, but the network keeps thinking and the ipad says, Safari cannot open this page because it is not connected to the internet. ?

    When you click on the WiFi network name, have you also provided the password for accessing the network?  You should get a dialogue box asking you for the security information the first time you connect.
    If you are not able to connect, you might want to go to Settings > General > Reset > Reset network settings.
    Then go back to Settings > WiFi and select your network name again and make sure the security information is now entered correctly.
    If you still cannot connect, power down the router, wait a few minutes, power up the router, with the iPad powered down the whole time, and after the router has had several minutes to stabilize power up the iPad.  See if it now connects correctly.

  • What does it mean when my ipad is in Recovery mode? It's connected to my imac for software update and it says I must "restore" the ipad before itunes can be used. Will I lose everything on my ipad?

    What does it mean when my ipad is in Recovery mode? It's connected to my imac for software update and it says I must "restore" the ipad before itunes can be used. Will I lose everything on my ipad?

    Unless you have a backup from which you can restore, yes you will lose all of your data and settings.
    You should be able to sync your content back to the iPad if you have been syncing with iTunes all along. If you don't sync with iTunes, you can download much of your paid content again for free as long as you use the same Apple ID. This explains downloading past purchases.
    http://support.apple.com/kb/ht2519
    Unfortunately, at this point, you must restore the device before you can move on. There is nothing you can do to avoid it now.

  • What does it mean when Siri keeps saying "I can't help you right now, please come back later."?

    What does it mean when Siri keeps saying, "I can't help you right now, please try again later."?

    Pretty much what it says, SIri can't help you right now.  I suspect it's a location, nework and/or server issue.  Siri is currently Beta and doesn't always work.

  • When you recieve a call what does it mean when callers name says blocked?

    when you recieve a call what does it mean when callers name says blocked?

    It means that the owner of the phone number has chosen to block there info from caller id.

  • What does it mean when your computer says that someone is using your IP address

    What does it mean when someone is using your IP address and what should i do...

    Expanding on Bob's explanation, be sure you haven't set a manual IP address, thus being the culprit for this problem. In System Preferences / Network / Advanced... / TCP/IP section, Configure IPv4 should be set to Using DHCP. If that is not the case, then some network miscreant has purloined the IP address your Mac was using.
    First try clicking on the Renew  DHCP Lease and see if the DHCP server figures it out and assigns a different address. Else, try disconnecting from the network (if on Wi-Fi, turn Wi-Fi off in the previous window, if cabled disconnect the patchcord), wait a little while and reconnect. Then hopefully the DHCP server will realize the address was purloined and assign a different one.

  • What does it mean when your ipod is in recovery mode and how do I solve this problem

    What does it mean when your ipod is in recovery mode and how do I solve this problem?

    Unless you have a backup from which you can restore, yes you will lose all of your data and settings.
    You should be able to sync your content back to the iPad if you have been syncing with iTunes all along. If you don't sync with iTunes, you can download much of your paid content again for free as long as you use the same Apple ID. This explains downloading past purchases.
    http://support.apple.com/kb/ht2519
    Unfortunately, at this point, you must restore the device before you can move on. There is nothing you can do to avoid it now.

  • What does it mean when you try to update i tunes and it tells you "itunes has an invalid signiture. the download has been removed"?

    what does it mean when you try to update i tunes and it tells you "itunes has an invalid signiture. the download has been removed"?

    What kind of things are you seeing as disabled? The administration might have disabled some features because they don't fit in the structure of the community that has been built over the last few years. This community used to be based on a forum platform called Lithiu . At the beginning of the 2012 it was moved to a forum platform called Jive. It brought a lot changes to the community. Some of which many of us regulars are still finding after almost a year.

  • What does it mean when the screen shows only the time and the play button

    what does it mean when i turn on my i-pod and it has a white screen and all it displays is the time and the play button cant get to the main screen to play music

    Is the hold switch in the on position?  Try resetting the iPod. To do this, press and hold both the Select/Center and menu buttons together long enough for the Apple logo to appear.  The iPod may have simply locked up.
    B-rock

  • My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?

    My ipods disabled and it needs to connect to itunes. During the restore a window pops up and says i need to type the password into my ipod but i can't. what do i do?

    Then try DFU mode and then restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My ipod says it is disabled and tells me to connect to itunes but nothing happens how do I fix it, My ipod says it is disabled and tells me to connect to itunes but nothing happens how do I fix it

    My ipod says it is disabled and tells me to connect to itunes but nothing is happening how do I fix it

    Place the iPod in Recovery Mode and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • What does it mean when my iphone says sim not compatible?, what does it mean when my iphone says sim not compatible?

    I've recently bought an iPhone and got my phone number switched over to a micro sim card.. But when i try to set the iPhone up it keeps saying Sim card not compatible. What does this mean?

    Your iphone is liely locked to a carrier.
    You would need a SIM card from that carrier or you would have to ask that carrier of they unlock iphones and if you qualify.

Maybe you are looking for

  • SQL Injection and Java Regular Expression: How to match words?

    Dear friends, I am handling sql injection attack to our application with java regular expression. I used it to match that if there are malicious characters or key words injected into the parameter value. The denied characters and key words can be " '

  • Command line script in LabView 2010 Win7

    Hi guys, How to execute a CL script in LabView 2010 and pass parameters to it?

  • Syncing photos from iPad to iMac

    I have tried several times to sync my photos from iPad to my computer and I get to a point when the import just stops and it is stuck on the picture and it doesn't finish syncing. Every time I tried to sync, it seems that it creates a duplicate of th

  • RECOVER RENAMED KEYNOTE FILE

    Hello, My mistake: im new to keynotes and its icloud, and figured it would work like dropbox. I finished my 6 hours keynote session. So, working on Keynotes and the file in Cloud, i decided to make a stripped version of less MB by deleting slides. Re

  • How do I add a password to autofill on iphone5

    I need to add a website and update a few passwords on my autofill for safari and I can't figure out how. I have checked to make sure that I am not in private session