What does "item XUL is in use" mean and how do I turn it off?

It trying to install upgrade, I am asked to replace older item with newer one and I click Replace. Then I get a message "The operations can't be completed because the item "XUL" is in use.
What does that mean and how do I proceed?

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Similar Messages

What does error code CE-38604-1 mean and how do i fix it

What does error code CE-38604-1 mean and how do i fix it

Delete and re-install whatever game is giving you this error.

What is this black bar on my screen and how do I turn it off?

There is a black bar on the screen that tells you where you are on the screen ....what is this called and how do you turn it off?

Can you provide a screen shot?
Ciao.

What does the xantrex driver error 5 mean and how to solve it?

Dear Experts,
I downloaded a new XANTREX driver and used it to control our new XHR
150-7 power supply. I tried to use the GET STRAT.vi to control the
output of the power supply. The output could be controlled according to
the command input. However, there is always an ERROR 5 message poped
out whenever it ran. The error source seemed to be in the DELAY &
READ.vi.
I would be most grateful if you could tell me how solve this problem at your earliest convenience.
Thanks a lot for your attention and help,
James

Exactly which driver did you downlaod and from where? By "GET STRAT", do you mean one of the Getting Started VIs? Error 5 means "NI-488: Command requires GPIB Controller to be System Controller." Are you using GPIB to control the instrument? If so, what type of board are you using and which version of VISA and NI-488? If the error only occurs on a read, try issuing the query from MAX and see if the error occurs there. In a couple of the Xantrex drivers I looked at, there seemed to be some fixed delays after a write and before a read. You might try increasing those values to see if that makes any difference.

WHAT DOES THIS HOT SYNC ERROR MESSAGE MEAN AND HOW CAN I FIX THE PROBLEM??

"THE HOT SYNC OPERATION WAS INTERRUPTED. SOME OF YOUR DATA WAS NOT BACKED UP."
"(ERROR: EASNotify.dll failed a confirmation query and cancelled the sync operation).
HotSync Error: An application cancelled synchronization or failed to respond to a HotSync notification. Please ensure that you are not currently editing data using applications such as Palm OS Desktop of Install Tool. (8009)"
I have spent hours upon hours trying to figure out what is wrong and why I cannot complete a hot sync with my computer. I have done a hard reset and reinstalled the palm desktop software numerous times with no luck. I bought a book on the palm. No mention in the book about this particular problem.
Can anyone out there help me with this problem??? I would be forever grateful!!
Post relates to: Palm TX
Post relates to: Palm TX

To check which applications are installed on your palm, you can click on the home button on your palm and make sure it says "all" on the top right of your screen. This will show you all the apps installed on your palm. Look through all the applications listed there and see if there is anything extra. You can list them here and I will tell you if there is anything that didnt come with your device when you purchased it.
You will not need the palm cd to reinstall everything again after you do a hard reset because all the info will be backed up on your computer from your sync. You stated that all the information is on your computer after you sync'd so you dont have to worry about losing it. Once you sync again after performing the hard reset, you will be able to get all the info back again on your palm.
Post relates to: Tungsten E2

Why is Firefox 17.0 now using SmearType, and how do I turn it off?

I updated to 17.0 today, and suddenly ClearType (what a joke!) is forced on, and I see no way to get rid of it. Seriously, ClearType is ugly and it makes it much harder to read webpages. This is the entire reason I refuse to install IE 9.0. Help?
OS: Windows 7 Pro 64-bit
Browser: Firefox 17.0 32-bit
Auto-updated 11/21/2012
ClearType was off in 16.0 and earlier. If it can't be turned I will have to revert.

We have a patch in the works. It seems to be an azure issue. setting gfx.content.azure.enabled = False seems to work in the meantime. We aren't sure if the patch will be part of a chemspill or wait until 18. Thanks for being patient!

Why when im streaming my songs for my library on my apple tv does it censor the songs and how do i turn it off?

Why when im streaming my songs for my library on my apple tv does it censor the songs and how do i turn it off?

I use iTunes Match, and I notice that when I play "matched" versions of 2Pac's "I Ain't Mad at Cha", all of the curse words are skipped over. Just to make sure it wasn't my copy of the track, I played it off of my permanent library, and the song plays properly. So I believe that Apple has seen fit to censor the song. I haven't read about this anywhere, but I'm pretty upset about it. I own the track -- I have a copy of 2Pac's Greatest Hits, which I ripped. If I turn off iTunes Match and transfer the song to my mobile devices with a USB cable, I could play it the way I want to hear it. I think iTunes Match is a fantastic concept, but I don't need Apple deciding what kinds of music I should or shouldn't be listening to.
Incidentally, I haven't noticed other tracks with curse words censored. It may be that I loaded them onto my mobile device before Apple began censoring.

Why does iPhone automatically enter my entire email address when I simply type "gmail" and how to I turn it off?

Why does my iPhone automatically enter my entire email address when I simply type "gmail" and how to I turn it off? It also does it whenever I type it in Safari (but not Chrome) and it only does it with one of my email addresses and not any of my other ones (i.e., yahoo, hotmail, etc.).
Thanks so much for your help!

I don't see visible underscores in that login form, but they appear to be entered (that form isn't high enough to show them for me).
You can verify that in the Scratchpad and use Execute > Display after pasting the below posted code.
* Firefox/Tools > Web Developer > Scratchpad (Shift+F4)
<pre><nowiki>document.getElementById("userid").value;</nowiki></pre>

Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off?

Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off? chessatwork has ran great for me for many yrs, then one day I down loaded firefox and went to play chess on this site chessatwork.com, well the window popped up asking to remember the log in and pass word and so I said ok, and it did, but now when I click log in and I go to my main page (home) and click on any link, say to play game I return right back to log in

See http://kb.mozillazine.org/Deleting_autocomplete_entries<br />
Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
You may also need to remove the cookies from that website.<br />
* Tools > Options > Privacy > Cookies: "Show Cookies"

I've been sent a scan of a document as an attachment. Clicking on it, I get the message, "Pixel aspect ration correction is for preview purposes only. Turn it off for maximum image quality." What is pixel aspect ration and how do I turn it off?

I've been sent a scan of a document as an attachment. Clicking on it, I get the message, "Pixel aspect ration correction is for preview purposes only. Turn it off for maximum image quality." What is pixel aspect ration and how do I turn it off?

It's "aspect ratio", not aspect "ration".
It's what determines whether you have square pixels ("normal") or, if rectangular pixels, what the aspect ratio (width : length) of that rectangle is.
It's explained in the Help files. I cannot go into more detail because you have neglected to provide information about your platform and exact version of Photoshop.
Example in next post

What is voiceover and how do I turn it off?

After traveling to a different country, my phone suddenly had voiceover turned on. What is voiceover and how do I turn it off?

Follow the instructions here to turn it off:
http://support.apple.com/kb/HT3598
Read about it here:
http://www.apple.com/accessibility/iphone/vision.html

What is gplayer and how do i turn it off?

what is gplayer and how do i turn it off?

It's something that is installed and running on your system. If you are on Windows, check with the Task Manager's Processes tab, and end it from there.

What does the shortcut control-3 and control-4 do, and how can I turn it off?

I'm trying to create some macros and remap my keyboard for a game, but running into some issues not being able to remap control-3 and control-4. I finally figured out that control-1 and 2 were used by Mission Control, and once that was off I gained control over those keys. But for the life of me I can't figure out what control-3 and control-4 do. I've searched various shortcut lists, but none seem to list this combination (except that it controlled Spaces, but that's gone with the new OSX).
Does anyone know what these keys are shortcuts for and how I can release them? Thanks!

user293, you must not understand what I mean, because this particular thing is brand new this past week. (I guess you think I am talking about a closely related thing, because I know that most of the way it is now has been this way for a while.)
Thanks cor-el, that totally fixed it.
Although I am dismayed that it's not just a search option and requires user hacking.

What is the Debugger and how do you turn it off?

Hi folks, I'm updating a site for a client and when I open
the home page
http://www.imcnewcastle.com
I get this annoying pop up from Adobe flash player 10 asking
if my debugger
is on this machine or host application and it locks up if I
try to connect
to local.
What the heck is this and how do I keep it from turning on? I
don't want
browsers to get locked up.
Thanks
Jeff
~~~~~~~~~~~~
Jefferis Peterson, Pres.
Web Design and Marketing
http://www.PetersonSales.com

Jeff,
> I get this annoying pop up from Adobe flash player 10
asking
> if my debugger is on this machine or host application
and it
> locks up if I try to connect to local.
It's annoying when you don't want to bebug, I agree, but the
situation
you're describing is really useful when you need to debug
Flash content in a
browser. ;)
> What the heck is this and how do I keep it from turning
on?
> I don't want browsers to get locked up.
Assuming you have the FLA source file, open it in the Flash
authoring
tool and head over to File > Publish Settings. Select the
Flash tab, then
uncheck the "Permit debugging" checkbox, then republish the
SWF.
Here's more information on debugging:
AS2
http://www.adobe.com/devnet/flash/articles/debugging_actionscript.html
AS3
http://www.adobe.com/devnet/flash/articles/as3_debugger.html
David Stiller
Co-author, ActionScript 3.0 Quick Reference Guide
http://tinyurl.com/dpsAS3QuickReferenceGuide
"Luck is the residue of good design."

What is this black dialog bar and how do I turn it off?

I started up my MBP today and found this little piece of garbage on the screen, telling me what I'm doing. I just updated my software last night, including iTunes; is this some crappy part of an OS X update? It happens when I have all applications closed, as well.
Strange thing is, it wasn't happening when I first restarted my computer after installing the new software updates. Does anyone know what this is and how I can close it?
Picture here - http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs611.snc4/591431324792845417_1398750903_31056529_7086257n.jpg

You pressed command-F5 and turned on VoiceOver. Press it again, or go to System Preferences -> Universal Access -> Seeing and turn it off.

What does "item XUL is in use" mean and how do I turn it off?

Similar Messages

Maybe you are looking for