What does jvm.exitOnAbort do in jvm12.conf file in iws4.1sp9

exitOnAbort is useful in debugging situations. Setting it to zero will cause the server to hang so that you can debug. The value is seconds. So, wait x number of seconds before aborting.
Hope this helps.

Similar Messages

What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired"

What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired" I get this when I try to repair permissions in disk utility.

It's an innocuous error you can ignore. It was introduced with previous updates for ARD and/or Java before Lion. These are messages, not errors. They will cause no harm, and they will be repeated each time you repair permissions.

What does it mean when I see the file with the question mark on my screen?

What does it mean when I see a file with a question mark on the screen?

Means no bootable system can be found or required system files are missing or damaged. Reinstall OS X.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

HT201210 what does it mean when it says 'firmware file not compatible?' after downloading itunes?

what does it mean when it says 'firmware file not compatible?' after downloading itunes?

Update your itunes to the newest version.

What does the "@" symbol after the "rwx" UNIX file permissions mean?

Greetings All,
I tried to run the Alliance VLSI CAD system using an example (examples/alliance-examples/multi16b-reg), but have not been able to.
It complains that the file "vasy" cannot be executed as a binary file.
Here is the transcript from the Terminal session.
Go Trojans >make all
MBKWORKLIB=.; export MBKWORKLIB; MBKCATAL_NAME=NOCATAL; export
MBKCATALNAME;
/Applications/apps/eda/alliancevlsi_cad_sys/downloadfiles/opt/alliance-5.0/bin/vasy
-a -B -L -o -p -I vhdl multi16
/bin/sh: /Applications/apps/eda/alliancevlsi_cad_sys/downloadfiles/opt/alliance-5.0/bin/vasy:
cannot execute binary file
make: * [multi16.vbe] Error 126
Go Trojans >
When I run "ls -al" in $(ALLIANCE_TOP)/bin, I get the following in
the Terminal.
Go Trojans >ls -al
total 17656
drwxr-xr-x@ 52 zhiyang staff 1768 Sep 2 2009 .
drwxr-xr-x@ 12 zhiyang staff 408 Apr 12 16:24 ..
-rwx------@ 1 zhiyang staff 108129 Sep 2 2009 a2def
-rwx------@ 1 zhiyang staff 12219 Sep 2 2009 a2lef
-rwx------@ 1 zhiyang staff 8713 Sep 2 2009 alcbanner
-rwx------@ 1 zhiyang staff 135645 Sep 2 2009 asimut
-rwx------@ 1 zhiyang staff 24975 Sep 2 2009 attila
-rwx------@ 1 zhiyang staff 25747 Sep 2 2009 b2f
-rwx------@ 1 zhiyang staff 157479 Sep 2 2009 boog
-rwx------@ 1 zhiyang staff 111598 Sep 2 2009 boom
-rwx------@ 1 zhiyang staff 106837 Sep 2 2009 cougar
-rwx------@ 1 zhiyang staff 568722 Sep 2 2009 def2a
-rwx------@ 1 zhiyang staff 251206 Sep 2 2009 dreal
-rwx------@ 1 zhiyang staff 20138 Sep 2 2009 druc
-rwx------@ 1 zhiyang staff 40808 Sep 2 2009 exp
-rwx------@ 1 zhiyang staff 30100 Sep 2 2009 flatbeh
-rwx------@ 1 zhiyang staff 9975 Sep 2 2009 flatlo
-rwx------@ 1 zhiyang staff 9959 Sep 2 2009 flatph
-rwx------@ 1 zhiyang staff 10746 Sep 2 2009 flatrds
-rwx------@ 1 zhiyang staff 20588 Sep 2 2009 fmi
-rwx------@ 1 zhiyang staff 20425 Sep 2 2009 fsp
-rwx------@ 1 zhiyang staff 9962 Sep 2 2009 genlib
-rwx------@ 1 zhiyang staff 2455 Sep 2 2009 genpat
-rwx------@ 1 zhiyang staff 412314 Sep 2 2009 graal
-rwx------@ 1 zhiyang staff 10881 Sep 2 2009 k2f
-rwx------@ 1 zhiyang staff 78387 Sep 2 2009 l2p
-rwx------@ 1 zhiyang staff 108420 Sep 2 2009 loon
-rwx------@ 1 zhiyang staff 33889 Sep 2 2009 lvx
-rwx------@ 1 zhiyang staff 36842 Sep 2 2009 m2e
-rwx------@ 1 zhiyang staff 55347 Sep 2 2009 mips_asm
-rwx------@ 1 zhiyang staff 65038 Sep 2 2009 moka
-rwx------@ 1 zhiyang staff 2448244 Sep 2 2009 nero
-rwx------@ 1 zhiyang staff 2172602 Sep 2 2009 ocp
-rwx------@ 1 zhiyang staff 14498 Sep 2 2009 pat2spi
-rwx------@ 1 zhiyang staff 9887 Sep 2 2009 pdv
-rwx------@ 1 zhiyang staff 51121 Sep 2 2009 proof
-rwx------@ 1 zhiyang staff 178806 Sep 2 2009 ring
-rwx------@ 1 zhiyang staff 60506 Sep 2 2009 s2r
-rwx------@ 1 zhiyang staff 37106 Sep 2 2009 scapin
-rwx------@ 1 zhiyang staff 12324 Sep 2 2009 sea
-rwx------@ 1 zhiyang staff 13430 Sep 2 2009 seplace
-rwx------@ 1 zhiyang staff 12276 Sep 2 2009 seroute
-rwx------@ 1 zhiyang staff 82653 Sep 2 2009 sxlib2lef
-rwx------@ 1 zhiyang staff 77310 Sep 2 2009 syf
-rwx------@ 1 zhiyang staff 301653 Sep 2 2009 vasy
-rwx------@ 1 zhiyang staff 11854 Sep 2 2009 x2vy
-rwx------@ 1 zhiyang staff 12392 Sep 2 2009 x2y
-rwx------@ 1 zhiyang staff 174556 Sep 2 2009 xfsm
-rwx------@ 1 zhiyang staff 167747 Sep 2 2009 xgra
-rwx------@ 1 zhiyang staff 185034 Sep 2 2009 xpat
-rwx------@ 1 zhiyang staff 249181 Sep 2 2009 xsch
-rwx------@ 1 zhiyang staff 178627 Sep 2 2009 xvpn
Go Trojans >
I suspect the "@" symbol indicates why the executables cannot be
run, even though the file permissions are set correctly.
How do I get rid of the "@" symbol for these files? What does the "@" symbol mean?
Thank you.
Message was edited by: Zhiyang

OK... Well, do you know what else may cause the problem?
Does the following help?
Go Trojans >ls -leO@
total 17656
-rwx------@ 1 zhiyang staff - 108129 Sep 2 2009 a2def
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 12219 Sep 2 2009 a2lef
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 8713 Sep 2 2009 alcbanner
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 135645 Sep 2 2009 asimut
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 24975 Sep 2 2009 attila
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 25747 Sep 2 2009 b2f
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 157479 Sep 2 2009 boog
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 111598 Sep 2 2009 boom
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 106837 Sep 2 2009 cougar
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 568722 Sep 2 2009 def2a
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 251206 Sep 2 2009 dreal
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 20138 Sep 2 2009 druc
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 40808 Sep 2 2009 exp
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 30100 Sep 2 2009 flatbeh
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 9975 Sep 2 2009 flatlo
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 9959 Sep 2 2009 flatph
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 10746 Sep 2 2009 flatrds
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 20588 Sep 2 2009 fmi
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 20425 Sep 2 2009 fsp
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 9962 Sep 2 2009 genlib
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 2455 Sep 2 2009 genpat
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 412314 Sep 2 2009 graal
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 10881 Sep 2 2009 k2f
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 78387 Sep 2 2009 l2p
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 108420 Sep 2 2009 loon
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 33889 Sep 2 2009 lvx
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 36842 Sep 2 2009 m2e
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 55347 Sep 2 2009 mips_asm
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 65038 Sep 2 2009 moka
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 2448244 Sep 2 2009 nero
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 2172602 Sep 2 2009 ocp
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 14498 Sep 2 2009 pat2spi
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 9887 Sep 2 2009 pdv
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 51121 Sep 2 2009 proof
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 178806 Sep 2 2009 ring
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 60506 Sep 2 2009 s2r
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 37106 Sep 2 2009 scapin
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 12324 Sep 2 2009 sea
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 13430 Sep 2 2009 seplace
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 12276 Sep 2 2009 seroute
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 82653 Sep 2 2009 sxlib2lef
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 77310 Sep 2 2009 syf
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 301653 Sep 2 2009 vasy
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 11854 Sep 2 2009 x2vy
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 12392 Sep 2 2009 x2y
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 174556 Sep 2 2009 xfsm
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 167747 Sep 2 2009 xgra
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 185034 Sep 2 2009 xpat
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 249181 Sep 2 2009 xsch
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 178627 Sep 2 2009 xvpn
com.apple.quarantine 42
Go Trojans >
They all seem to end with "com.apple.quarantine". What does this mean?

[Solved] What does the number in "20-keyboard.conf" mean? X11

Hello everyone!
Last night I installed arch with i3wm with aid of the installation guide in the wiki.
My question is already in the subject. During the configuration of X11 I had to create some files like "20-keyboard.conf" and "20-thinkpad.conf".
So what excactly does this "20" mean or is there any meaning?? Couldn't find any answer on the internet..
Thanks in advantage!
Last edited by i3 (2014-08-27 23:17:16)

Have to ask: if you change window manager, are you also going to change your nick?

What does a camera add to a Raw file to make a finished Jpeg version?

I've used Lightroom 4 for a while now but have only ever used Jpegs, and mostly using just the basics panel and curves. I want to try developing Raw files now too.
I was wondering, compared to a Raw file what extra steps does the camera add to make a Jpeg file of the same image, essential steps that you would consider doing yourself to a Raw file in Lightroom too?
I'm aware of Noise reduction, but am a little unsure about the rest.
Many thanks.

Pbeck1 wrote:
my original question I feel is still partly unanswered, and that is: For a beginner to Raw editing, is there some sliders that should always be checked &/or adjusted without fail (even if you decide that no adjustment is needed).
Answer:
* white balance is critical, so it should always be considered on every photo, even if no adjustment required.
* make sure you set camera profile according to taste (and after you gain experience, you may want to roll your own).
* set lens corrections by default: CA + profile (I use a percentage of 100 for vignette correction by default, depending on lens).
* fixed default for Lr color noise reduction (Lr default is usually fine). (color noise reduction is auto-adaptive, so you really don't need to set based on ISO, although you may need to up it on some photos to get all color noise, or down it on some photos to eek out max detail.
* luminance noise reduction and sharpening should be set (initially) based on ISO range.
Then adjust the basics. If toning can't be perfected with basics, supplement with tone curve, if still some imperfect areas, touch up with locals. Use HSL if need be, and so on and so forth.
Fair enough?
PS - I consider a default of 30 for luminance noise reduction to be *extremely* high. I start at zero for low ISO shots, and ramp it up to 25 for highest ISO shots. But consider that Lr's sharpening detail slider should only be used at lower ISOs (that's just my opinion/taste - ymmv). I set detail at 20 for lowest ISO shots, and ramp it down to zero for high ISO shots (as a default - I sometimes up it or down it afterwards). If sharpening detail is kept low, you won't need so much Lum. NR.
Notes:
* color noise reduction detail matters very little except at highest ISOs, in which case you can up it to eek out more detail, usually at the expense of more noise (so it needs to be balanced with amount).
* likewise luminance NR contrast has only a very subtle effect at highest ISOs, and can pretty-much be ignored unless you are really wringing out the detail.
* luminance noise reduction detail however can be important for not losing hard-won detail in the interest of noise control - consider uping it if you need to preserve detail in birds feathers or stone... - crank it down if you just want it clean - detail not important..
What else you need to know?
To summarize:
===========
Lens corrections are a necessity in most cases, and you need to figure out how you like NR & Sharpening set by default. Camera profile determines the general look and feel of the photo and as such can be considered setting #1 (white balance is also setting #1 - yep: there are two #1s ;-}).
Many photos can then be adjusted satisfactorily just using the basic sliders. What's needed after that, really depends on the photo, and you...
Final thoughts are about sharpen masking. I used it a lot in the beginning, then noticed yucky artifacts / sparkling stuff scattered about..., and stopped using it entirely for years. It's undesirable side-effects are most noticeable when sharpening detail is up (and/or sharpening amount). Moral of the story, if you keep sharpening detail (and/or sharpening amount) down, you can also use sharpen masking to keep from sharpening noise in "sky" and "skin", as another way to keep from needing so much lum. NR. Anyway, I'm using it again now, albeit very judiciously. Tip: press Alt key when adjusting sharpen mask slider.
Put another way: sharpen masking masks (disables) sharpening in some places, but not others. Whether the transitions between masked regions and adjacent unmasked regions looks like hell or not depends on how much noise is being sharpened in the unmasked regions, since it's not being sharpened at all in the masked regions. Unfortunately, the situation can not be improved by increasing global noise reduction, since that makes the masked regions smoother too (as well as the unmasked regions).
Bottom-line (imo): If low-noise is the priority over sharpening, then keep sharpening amount and detail low and use masking. If sharpening is a priority over over noise, then leave masking off and crank up sharpening til heart's content. If both sharpening and noise are priorities, there is no choice but to sharpen and/or noise reduce via locals, since using sharpen masking in conjunction with high sharpening (detail and/or amount) on a noisy (or even semi-noisy) photo, looks like cr@p (yes: that's just my opinion), regardless of global lum. NR setting.
PS - Some people use sharpen masking with sharpening detail (and/or sharpening amount) up too and don't know what the heck I'm talking about - YMMV...
Although I use zero sharpen masking by default, some people use light sharpen masking in default settings, and some people use heavy sharpen masking as default. Worth considering how much of it you tend to like...
UPDATE:
~~~~~~~
Settings you usually don't have to mess with, as a beginner: and why.
* Camera calibration color sliders: white balance suffices.
* Effects: most are "advanced" / optional (although you may want to explore post-crop vignette amount as your first foray).
* Lens corrections: you need chromatic aberration at a minimum, and some profile-based correction by default is usually good, but the rest are "advanced".
* Detail (covered above).
* Split toning: "advanced".
* HSL: "intermediate".
* Tone Curve: consider using the parametric curve sliders, if you are beginner; point curve & channel curves are advanced; moving the parametric range-changing doo-hickeys: let's call that "advanced" too.
* Locals and such can be considered not for begginers, but they will need to be used too at some point for optimal results. I mean, even beginners need to get the red-eye out sometimes, or kill dust spots... And you can get by without gradients or paint for a while, but not for long...
Have fun,
Rob

What does Safari do when it uncompresses a file?

I'm using Safari 4.0.3 on a MacBook. Recently, a colleague said that a file on our public website was corrupted, so I tried downloading the file to see for myself. Safari downloaded the file, which had a .gz extension, and then quietly uncompressed the file, just as it should do.
But when I download the file and then run gunzip on it in the Terminal, I get an error message: "invalid compressed data--crc error." This is the problem that my colleague reported.
I'm puzzled. Either (a) Safari has some other way to uncompress this file, which works; or more likely (b) Safari is uncompressing the file incorrectly, and neither detecting nor reporting the problem. That would be bad.
I've been looking through the logs to try to find some evidence for what Safari is actually doing when it uncompresses the file, and I can't find anything. What's going on?
You can get the file from my company's public website and experiment for yourself. The file is at http://www.itasoftware.com/careers/puzzles/bitvectors-genes.data.gz I don't expect you to diagnose the problem with the file--we can fix that easily enough. I just want to know what Safari is hiding from me.

That's a warning from the Chrome browser. If you're sure that you downloaded the file directly from Microsoft, and not from any other website, you can ignore it.

What does it mean when it says 'firmware file not compatible?' after downloading itunes?

AS ABOVE

I believe that it was in sleep mode, but my old Mac didn't do this. When I came back to it after being in sleep mode, it would start right back up, none of this white screen delay before getting started.

IBooks Author.....Download error. What does this mean? "The product distribution file could not be verified. It may be damaged or was not signed."

This is happening when I try to download ibooks. It just doesn't work?

Try this...
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly as you see it here:
/Library/Preferences/SystemConfiguration
Click Go
Move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store and try downloaing Mountain Lion.
Might also need to disable anti virus software and turn off the Firewall in System Preferences > Security & Privacy > Firewall.

What does it mean that our files must be downloaded by January 2015? Will our files still be accessible after this date or will they be deleted?

Hi Everyone!
I'm a bit new to the whole PDF thing and am thrilled to share that I finally figured out how to use this cool feature! Well sort of! I noticed that there is a large red button that says all files will be deleted on January 6th. What does that mean exactly? Will any files that we have stored here simply vanish? I have a PDF file that I published in my 'workspace' that's linked to my business website. Will the link to my PDF file just disappear on January 6th? Thanks for any insights that you can share!
Blessings,
Lori

Adobe Workspaces is being retired at the beginning of 2005. For more information, see FAQ: Adobe Workspaces retired.
Yes, links to any files your have stored on Workspaces will not work after January 6, 2015.

What does "save" do in MS Office 11 for the mac?

I'm not sure this is the right forum to ask this in, but here goes:
Using MS Office 11 for the mac, if I view mail in my inbox, and click "Save" in the file menu, what does this do? Where is the file saved? "Save As" is grayed out, so this doesn't work. "Save" is NOT grayed out, so I assume it does something, but what?
thanks!

jkevn wrote:
I'm not sure this is the right forum to ask this in,
You're right. Post on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

What does "cannot find symbol"

i got this when i was writing a program
2 errors found:
File: C:\Documents and Settings\Project1.java [line: 7]
Error: cannot find symbol
symbol : class Scanner
location: class Project1
File: C:\Documents and Settings\\Project1.java [line: 7]
Error: cannot find symbol
symbol : class Scanner
location: class Project1
What does this mean?

2 errors found:
File: C:\Documents and Settings\Project1.java [line: 7]
Error: cannot find symbol
symbol : class Scanner
ocation: class Project1try using:
import java.util.Scanner;or
import java.util.*;this should work.

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location." What does this mean?

I'm using DVD Studio pro to burn a dvd but it won't let me cause I keep getting a "Formatting Failed" error message. It says "Formatting was not successful. Layer 0 exceeds max layer size allowed. Choose a suitable marker location that will support this condition." What does this mean?
Kris

It means your file is too large to fit on a single layer disk.
Recompress to keep the overall size (audio,video and menus) below 4.5GB
x

What does '-tef' suffix stand for? Why are we seeing it?

Two questions, one to satisfy an obsession with details, the other a UI issue in iWork/Mountain Lion.
1. What does the suffix "-tef" added to iWork files stored in iCloud (e.g., pages-tef) stand for? Is it an acronym, a word, what?
2. More critical UI issue: Why are we seeing this when saving iCould iWork files? Isn't this revealing some part of the backroom structure of things that the system should be keeping track of? It exposes to the UI things that are not helpful and could be harmful (for example, what happens if I delete the suffix?). Just saying.
iMac

Look at this:
http://www.macobserver.com/tmo/article/digging_deep_into_iwork_document_sharing_ in_mountain_lion/

What does jvm.exitOnAbort do in jvm12.conf file in iws4.1sp9

Similar Messages

Maybe you are looking for