What does mean custom version?

when i check my device software on my Nokia 5800xm it says
Software Version
v50.005
Software version date
23-03-2010
Custom version
50.005.477.02
Custom version date
22-04-2010
Language set
02
Model
5800 XpressMusic
Type
Rm-356
Latest update
Not updated
What does "Custom version" mean?
Glad to help
Solved!
Go to Solution.

The above answer is incorrect. That number would be the same for someone who had updated to v50 or someone who had v50 out of the box.
The custom version number is a more specific number that takes into account regional (and sometimes network) variances.
In the past on some models there has been updates that don't change the software version but do change the custom version number. These are believed to have been extremely minor updates, perhaps to correct a spelling mistake in a certain language.
When talking about your phone on forums it's better to refer to your firmware just using the shorter software version number.
Also the bit that says "not updated" is normal. If you update via FOTA it shows the date you updated. If you update using NSU or reset the phone it will always say not updated.

Similar Messages

  • What does the 'customized version'?

    I wonder that means the data 'customized version' in the administration of the phone. My phone Nokia N8-00 is from Argentina and my provider is Claro RA, do not know if this information is important. I've seen in other Symbian Belle customized version that is more recent; my dating from 03.01.2011 (January 3, 2011) (see images).
    Nokia N8-00 user
    Solved!
    Go to Solution.
    Attachments:
    Captura000048.jpg ‏55 KB
    Captura000049.jpg ‏46 KB

    Yes, I have the latest version and no new updates.
    Well, thank you very much for your reply. It was not that hard, right?
    Greetings!
    Nokia N8-00 user

  • What does mean You can include static and dynamic tables into a Smart Form?

    Hi guys,
    If you check the official documentation for Smart forms in the Internet you will read that the initial pharagraphs of the text tell you "Tables - You can include static and dynamic tables into a Smart Form. Dynamic tables enable you to display tables whose size is determined only at the moment of their output by the number of the table items to be displayed". The link is the following: http://help.sap.com/saphelp_nw04/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm
    I was wondering if this means that I can use field symbols with dynamical number of columns to print a smart form. Because it would be great since the customer wanted a dynamical report depending on the week day it was (If Monday, there was only 12 columns, but if Friday, it will be 52 columns (1 column more for every day elapsed in the current week)). I had to create 5 different forms, but I think using field symbols I had spent less effort. Do you know if it is really possible? If not, then what does mean "You can include static and dynamic tables into a Smart Form"?
    Thank you in advance

    Hi ,
    The concept of static and dynamic tables in smartforms, means you can use template- ( static table as no of rows and columns is fixed). Also you can use table- dynamic as the no of rows will depend on your line items.
    Hope this will help you to close this thread.
    Also, try to find this answer in posted forums. Creating a new forum everytime just increases the network traffic. So please try to avoid it.
    Regards,
    Vinit

  • What does the field  "Version of the Reporting Component" in the table RSZC

    Hi Experts,
                       Was wondering if any of you have the answer to the following:
    The table RSZCOMPDIR stores details of the queries.
    Now the field "Version of the Reporting Component" in this table contains many different values viz. 0, 11, 13, 15, 100, 101, 102 etc.)
    However, am not sure if this field denotes the object type....for e.g. bot calculated & restricted key figues may have version 15 etc.
    So, in a nutshell, what does the field  "Version of the Reporting Component" in the table RSZCOMPDIR signify?
    Thanks,
    Bala

    I have not seen this done for CVI but I believe for all Microsoft functions such as this you would use ActiveX to call the Word, Excel, and possibly powerpoint ActiveX classes.
    Ian M.
    National Instruments

  • What does mean error 1009 when download from appstore?

    What does mean error 1009 when download from appstore?
    This is not fair only for my location or anything I have a product and expect to support my device
    This is not question I got my answer on other posts but didn't satisfactory.
    Thank you.

    I got this iphone from a guy and everytime i tried to update the applications stored in this phone it keeps asking me the password that the guy used to use, even thou i created a new apple ID of my own and updated the account of icloud and everything in this iphone with the new apple ID, it still asks me the password of the account that the guy used to use whenever i tried to update the applications, and i cant find the guy who gave me this iphone...wt should i do???

  • What does mean the error "System status DELT is active"?

    Hi Gurus,
    Can somebody tell me what does mean the error "System status DELT is active"?

    Hi Disha,
    I m getting the same message while trying to update the contract using FM "bbp_pd_ctr_update".
    When  I go and check the Item or header it is not marked for Deletion. Is there any table or field which indicates that it is marked for Deletion.
    Any help on this is highly appreciated.
    Regards
    Surender

  • I have a iPod but the only I have in the screen is like  a skull apple image what does means?

    What does means Skull Image in my iPod screen?

    It means the iPod has been jailbroked, You can try restoring the iPod via iTunes

  • What does mean the itune icon with a cable in the iphone screen?

    what does mean the itune icon with a cable in the iphone screen?

    I'm having exact same problem. I was installing the latest ios7 update (to fix some Facetime bug that I don't have) and this happened. I noticed in some other posts on similar problem to hold down the sleep and on buttons at the same time and tried that. No change. Then I plugged it into my laptop and it said it was in recovery mode. I'm now in the process of restoring the software.
    I really hope I haven't lost all my contacts, notes, and photos.

  • What does mean when a imac screen goes all white

    what does mean when a imac screen goes all white

    Hopefully its not the logic board. try a PRAM reset: http://support.apple.com/kb/HT1379
    basically hold cmd, option, P, and R directly after start. Keep holding them down until you hear two chimes. That indicates a successful PRAM reset. It is not uncommon to hear 3.
    If that doesnt work try an SMC reset. Pull out the power cord from the back of the mac for atleast 15 seconds. plug it in again for 5 seconds and power back on ...http://support.apple.com/kb/HT3964
    Regards,
    Cody

  • What does mean "2 component active for validations"?

    Hi Gurus,
    I want to activate cost center component in a controlling area(tcode okkp). So I want to know what does mean " 2 component active for validations", and the difference with " 1 component active". It seems that co document will not be created when I choose "2 component active for validations".
    Thanks in advance,
    --Alex

    Hello Alexander,
    1  -  Active
    CCA is active without limitation. Cost centers are validated against the cost center master. They can be used as account assignment objects. The CO files are updated on posting.
    2  -  Active for validations
    CCA is not active. Cost centers are validated against the cost center master. The cost centers can be used as account assignment objects but the relevant CO files are not updated on posting. If CCA is implemented at a later date, you can subsequently post the cost-relevant business transactions in cost centers to the relevant CO files (OKBA, OKBB, OKBC).
    So when you set the activation status to 1, you can post CO documents, and when you set the status to 2, co CO documents will be created but you can set CO objects on posting lines and these CO objects will be validated. This ensures, when you activate CCC at a later date, then these postings can be re-posted to CO.
    Cheers,
    Daniela

  • What does mean this....

    My power supply says:
    +3.3V/22A +5V/32A +12V/16A
    What does mean the other numbers? and which is the best number?¿

    A computer Power supply provides power to the PC.
    The PC operates on different voltages, +3.3v, +5v, +12v and even -12v and -5v.
    An axample would be a CD drive may require 12V and a floppy drive may only need 5v.
    Think of the power supply as a combination of different batteries.
    The second part to your numbers is the Current ratings. As each voltage is separate from the other voltages they all have their own Current rating.
    So in your power supply the +3.3v battery/(known as rail) can only provide 22Amps, the +5v rail can only provide 32Amps.
    To understand how voltage and current are related you need to know a bit about electricity.
    Voltage = current X resistance.     Power = Voltage x Current.
    Now if a cd drive in your PC required +5v and 16Amps, how many could you have?
    The answer is 2, provided they are the same as different CD drives have different specifications.
    So if you put 3 of these CD drives in your PC what would happen?
    Your power supply will try to provide +5V to all of them and 48Amps (16x3) but this is too much POWER for your power supply to provide, the result is smoke and your power supply will burn.
    This applies to all the Voltage rails in the power supply. Therefore the higher the Current rating per Voltage rail, the better the power supply as it can handle more devices which means provide more POWER.
    So just incase you are still confused,
    The power supply is a combination of batteries, 6 in total. Batteries known as rails.
    +3.3v, +5v, +12v, -5V, -12V, +5vsb
    Each battery has a Current rating.
    The more current a voltage rail can provide, the better the power supply.
    Finally incase you thought this, The batteries are always the 6 values I stated as it is a power supply specification, manufacturers try to get their power supply to match these Voltage values.
    Now numbers mean something  

  • What does mean "property node and invoke node"?

    I want to read excell file and could program it with refering to this discussion board.
    But I can't understand details of this process.
    For examples , What does mean to put "workbooks,visible,Displayalert"?
    and What does mean "open,filename,etc・・"?
    I want to be taught this object meaning each process as minutely as possible.
    Hope your help!
    Attachments:
    設定配列読込（Excel to string table).vi ‏64 KB

    Typically with any activeX programming in labview you drop an reference to an object , open the reference, then invoke the methods and set the properties and when done you close the reference.  To select what reference you would like right click on the activeX reference and choose "browse".  The excel object library provides many activeX interfaces but typically you would manipulate the application object, Workbook or worksheet but I have only used the excel interface a few times, I prefer to use excel offline and not directly communicate with the application programmaticly.  You can also place an axtiveX container on the front panel and select the Excel container object to embed an excel instance on your front panel.  Good luck.
    Paul
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • What does "**" mean here

    in this statement :
    2**(1-127)
    what does ** mean?
    thanks

    is this what it mean?
    1 * 2**(129-127) * 1.101 : -> 1 multiplied by 2
    raised to 2 multiplied by 1.101That's how I'd read it.
    Wow that was unclear...
    Here: 1 * Math.pow(2,2) * 1.101

  • What does mean the "i" of 9i?

    Just wondering, what does mean the "i" at Oracle 9i?
    And the "g" at 10g?

    It was started with Oracle 8, included internet i to 8i, Basically one JAVA runtime engine included within the database itself to execute JAVA code, so Oracle 8 became 8i.
    Grid computing (RAC) included with 10g.
    Dilipkumar Patel.

  • What does mean by role comparision

    what does mean by role comparision

    Hi,
    Go through this user guide doc...u could get the req info on role mitigation..
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0043a8ab-bdae-2910-d8bc-cf4abd4d6bed]
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/403ae057-4dc2-2910-3cbb-ffdaf1bc55d4]
    hope it helps...

Maybe you are looking for