What does software update 1.22 fix?

Does anyone know what software update 1.22 fix?

Yes. My flicker was most noticeable when i was using dashboard and had a white background for my desktop on any setting less than full brightness. After the update the problem is gone as I type this at a low brightness setting. I think the Nvidia card was not optimized for LED back lighting.

Similar Messages

What does firmware update 7.1 fix?!?!

Specifically, does it fix the wake from sleep issue. It's been stated MANY times here some fix suggestion seem to work, others don't.
When my iMac wakes from sleep, Airport doesn't connect. I have to turn off Airport and then back on again for it to connect. I NEVER had this issue with my previous wireless router (NETGEAR).
So, does anyone know if this new firmware addresses this issue and what else it does?
Many thanks.

I've always had this problem with Macs.
The solution for me is to go into System Preferences/Network and double-click Airport. Change 'By deafult, join' to show 'Preferred Networks' in the drop-down box, then click on + and find your network. Enter your WEP or WPA key and click 'Apply Now'. You should find that you will not have a prroblem auto-connecting after sleep mode.
You can add further networks as you need.
Aplogies if this has been posted before, it hasn't been an isue I've been following, just noticed it under the new firmware thread.

My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

Start up in Safe Mode.
http://support.apple.com/kb/ph14204
Repair Disk Section: "Try Disk Utility"
http://support.apple.com/en-us/HT203176

I got error 3295 when doing software update to 4.3.4 on my iphone4.. can some one tell me how skip this error?? I'm new to apple products..!?

I got error 3295 when doing software update to 4.3.4 on my iphone4.. can some one tell me how skip this error?? I'm new to apple products..!

anyone????

What does iPod update ver. 1.4.1 do?

What does iPod update ver. 1.4.1 do?

You might want to check this link.
Dell Inspiron 1100 Windows XP

Anyone know what the software update does?

Just noticed that there is a software updated available from Motorola, unfortunately only for Windows machines, but I'll be able to get it done.
Has anyone installed this yet? Does anyone know what it does, as the site doesn't give much detail?
Also, how do you check to see what the current version is that you are using?
Thanks.

You might have a ringing phone while you are on a call
and it will not stop ringing...
turn the phone off... and keeps ringing...
you will have to pull the battery out.
Yes the software undate is only on a PC... :MAD:
It's to fix the ringing and ringing... and Itunes update (so they say)
I have been on the phone with tech and 7 different people and total time...... 2 hour 15 minutes... and its not resolved yet
Found a friend with a PC and it would not install...phone not found as soon as you open the installers after 45 mintes of trying
This number seem to be of help
800-461-4575
Data support in Canada

Macbook will not boot up after running Software Update (Couldn't fix it)

Hi there,
I also have been experiencing some problems after running Software Update (Security update + Java) a couple of days ago. Similarly to Jandaf (http://discussions.apple.com/thread.jspa?messageID=9000023) I have only the gray start up screen + Apple logo + gear wheel constantly rotating. Based on the information provided in this forum I have tried some procedures which didn't solved my problem so far. Below I describe I have tried:
1) I have booted using the installation DVD and run the disk utility. When performing the First Aid/Verify Disk I found some errors ('Invalid node structure'). But I couldn't fix the problem using disk repair (same problem 'Invalid node structure' 'Volume check failed'.
2) I also tried to boot in single user mode (command + s) to run fsck -fy. It didn't work. I got the following message (last 4 lines):
CSRHIDTTransitionDriver::probe: -s
CSRHIDTTransitionDriver::probe: booting in single user .. do not match
Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
Extension "com.apple.driver.AppleUSBTCEventDriver" has no kernel dependency.
3) When trying to boot in safe mode. I got a grey screen with the following message:
'You need to restart your computer. Hold down the power button for several seconds or press the Restart button".
4) I also tried to 'Archieve & Instal'. Again no success. After reading the DVD the action is terminated because some errors (does not specify).
5) I also tried the 'German Medicine' (http://discussions.apple.com/message.jspa?messageID=8728797#8728797) (i.e. Connect the 'problematic MacBook' to my old G4 via firewire and reinstall the 2009-001 update). Again no success. The G4 cannot mount the MacBook hardrive.
I don't know what to do any more.
A) Can I resuscitate my old system? If yes how?
B) If not, can I at least save the data I have in my old HD?
C) Is it possible to format and reinstall the OS or is this this computer doomed?
Apologies for writing so many questions but I'm really freaking out!
Thank you.
B.

Hi BDAqua,
I did as you said and got a firewire backup drive (Seagate - FreeAgent Desk 500GB). I tried to make a carbon copy of HD but it seems that the copy had some problems. Below I report both the CCC and console logs:
1) "Cloning method: Backup everything
Delete items on target that aren't on the source: No
18:23:39 Enabling ownership on the target volume...
18:23:50 The target volume has ownership enabled.
18:23:50 The target volume has Access Control Lists enabled.
18:23:50 Authenticating...
18:23:50 Initiating synchronization engine...
18:23:51 Cloning...
18:31:20 rsync: readdir("/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj"): Input/output error (5)
19:04:41 rsync: readdir("/System/Library/Components/AudioCodecs.component/Contents/Resources/Fr ench.lproj"): Input/output error (5)
19:05:41 rsync: readdir("/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:06:01 rsync: readdir("/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:07:05 rsync: readdir("/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBC DCECMData.kext/Contents/Resources/French.lproj"): Input/output error (5)
19:10:13 rsync: readdir("/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Resou rces/French.lproj"): Input/output error (5)
19:50:10 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2] (51)
19:50:11 rsync: Some errors were encountered during the backup., Error code: 51
19:50:14 Sync Engine warnings: (
"rsync: readdir(\"/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Components/AudioCodecs.component/Contents/Resources/F rench.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSB CDCECMData.kext/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Reso urces/French.lproj\"): Input/output error (5)",
"rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2]"
2) "Mac OS X Version 10.4.11 (Build 8S2167)
2009-03-01 10:30:14 +0100
2009-03-01 10:30:21.962 SystemUIServer[213] lang is:en
Mar 1 11:20:32 Bs-Home-Mac /usr/sbin/ocspd: starting
Mar 1 11:38:25 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 12:46:40 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 13:54:55 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 15:03:13 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 16:11:31 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 17:19:46 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 17:47:20.393 Skype[313] SkypeApplication::init called
2009-03-01 17:47:21.554 Skype[313] SKInitDebugLogging
2009-03-01 17:47:46.169 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
2009-03-01 17:47:47.208 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Starting the process...
2009-03-01 17:48:36.186 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:36.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.369 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:59:16.450 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Mar 1 17:59:19 Bs-Home-Mac crashdump[355]: Skype crashed
Mar 1 17:59:20 Bs-Home-Mac crashdump[355]: crash report written to: /Users/bernardolima/Library/Logs/CrashReporter/Skype.crash.log
Mar 1 18:23:50 Bs-Home-Mac authexec: executing /Applications/Carbon Copy Cloner.app/Contents/Resources/helper_tool
Mar 1 18:28:01 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 18:41:03.154 Skype[393] SkypeApplication::init called
2009-03-01 18:41:12.433 Skype[393] SKInitDebugLogging
Mar 1 19:36:16 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 19:55:54 Bs-Home-Mac mdimportserver[480]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2746
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 20:44:34 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 21:52:51 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 23:01:07 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor"
Due to my lack of knowledge I can't judge how bad this is. But I can tell you that every time I read the word bad in the log it scares the s*** out me.

Does 'software update' also update the display drivers?

Does the iMac software update also update the graphics card drivers, or am I better off trying to install them manually?
My iMac has the Nvide 7600 GT display. I'm having a display issue with Adobe Dreamweaver 8, and I suspect it is an issue with my graphics card. I don't know how to tell if my graphics card driver s/w is up-to-date or whether I am better manually installing the driver?

If the app is a PPC program it will always run in Rosetta emulation mode on an intel mac. You can choose to run universal apps in rosetta emulation if you want, but it usually sacrifices performance (program will run slower). To check this, go into the apps folder, command click on the app and select get info. It will tell you what kind of app it is, universal or PPC. For universal apps you have an option to run in rosetta. Check that box and the next time you start that app it will run in rosetta emulation mode. Again, this will result in some performance loss for that app, and it isn't necessary to run the app. So, that being said, I don't know why you would need to do that. Maybe someone else here can answer that question.
20" iMac 2.0 GHz Intel Core Duo Mac OS X (10.4.9) 60 GB iPod Video

What does Firefox Update change?

So I am trying to figure out a way to update Firefox without going around to each and every machine.
I have partially achieved this by copying over
C:\Program Files (x86)\Mozilla Firefox from a machine with the current version to a machine with the old version and it seemed to work pretty well. Except. My inventory software is reading it still as the old version.
So where else does the update effect? I though it might be in the registry files someplace but I don't see it....

Add-ons are developed by third-party developers, and as such there is no guarantee they won't break. We aren't responsible for them or for making sure the millions of add-ons in existence all work properly in every version of Firefox (If we were, we might as well give up on Firefox).
That being said, we do try to restrict breaking changes to the code that Add-ons use. Sometimes it is inevitable, but we make sure to give add-on authors plenty of warning (usually 12-18+ weeks) before a change that might break their extension. We also automatically check every extension installed on our site for things that might not work in new versions, and every extension that passes (the vast majority) are default to be compatible with the new version without the add-on author having to do anything.
Unless you have a third-party binary extension. These are commonly Anti-virus toolbars, etc. These extensions stop working with updates frequently. This is because these companies don't bother to read our notes of what's changing or to release updates for their software until after release.

Does Software Update CAUSE crashes, or come up AFTER crashes?

Over the past 6 months or more my machine has only hung (i.e. requires a press of a hardware button to restart), about 3-4 times. Each of those times, when I restart the first thing I see is the Apple Software Update screen. At least a couple (if not all) of those times the second thing I see is the Microsoft Office Automatic Update Screen.
I was in the office over the weekend, and no IT guys were around, and the OSX SERVER crashed (which knocked me off the internet, and also off the file server). When I restarted that machine, the first thing that came up was the Apple Software Update.
The question I have is:
* Could the Apple Software Update application be causing my crashes, or
* Am I seeing a feature where OSX says "hey you just crashed, let's check for updates now, even if it hasn't been a week (which is what your preferences say I should wait)".
Does anyone know? I've asked my IT guys here, and they've gone back and forth on it.
Thanks,

Why speculate? Chances are, if you look in the system console, you can find some information that might shed some light on this problem. The console is located in the Utilities folder.

What is software update.sh?

I have just updated to 10.10.2.
Now I have a menu extra which is a little constantly rotating gearwheel in the menu bar.
When I click on it, a drop down menu reads
"Software Update.sh
running"
What is this?
How do I stop it?
How do I get rid of it?
Thanks.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

HT1351 Music imported from CDs will not synch to my iphone or ipad - even though it's ticked and set up correctly. Looking at other posts this seems ot have been an issue for ages. The latest itunes software update hasn't fixed it

This has now been ongoing for over a month - the lastest software release hasn't fixed it.
I can import music from CDs - the tracks are ticked for synching and all the associated rigmarole is correct.
Problem is when I synch, apps go across but imported music doesn't. It just gets to step 5 - waiting for changes to be applied - and then does nothing until it eventually finishes synching but no music has come across.
Same issue on my iphone.
I have looked at some solutions on forums but they seem complicated and I don't understand why apple haven't yet fixed this (or why you can't contact them). Seems a basic fundamental service that they are not supplying.
Having spoken to people in the family, its seems I'm not laone with this problem (unless you have a mac......)

I had this same problem with my new MBP 15", but only with the USB port on the left side. The USB port on the right side worked fine. Perhaps the ports on the left don't have enough signal energy for the iPhone.
Anyway, try using a different USB port, and if that doesn't work, perhaps you could try a powered USB hub.

Nokia videos: What are Software Updates & How to d...

Hi all,
we've been busy in Nokia Care and have been preparing some videos to explain you what the whole software update concept is all about and how you can update your phone over the air or via PC - and how you can use WiFi to save data download costs.
Introduction to Nokia Software Updates (video 1/5) - http://www.youtube.com/watch?v=-zwfeCq5ddI
Nokia firmware update over the air (video 2/5) - http://www.youtube.com/watch?v=3sXtfv5kk5g
Nokia applications update over the air (video 3/5) - http://www.youtube.com/watch?v=GP7oMuVvsa8
Software Update with Nokia Ovi Suite (video 4/5) - http://www.youtube.com/watch?v=ADIj1U2m9z4
Setting up Wi-Fi for free data downloads (video 5/5) - http://www.youtube.com/watch?v=mFMTv0uSGdc
pS: Those videos cover the whole Nokia portfolio (smartphones & mobile phones) and have been done to support our whole customer base when it comes to "how to do an update". So to be clear: This is not an announcement about Symbian Anna (even if the videos feature some content that will be familiar from previous press releases).
BR,
yvonne
edited by vandelay: the videos are now embedded in the post.

I have this problem after symbian Anna Update..
When i tried solution 1 : it replies me .sisx files not supported
when i tried solution 2: no tmp files found.
Is there any other way? im wondering why it says file not supported.
FA136074: Why is Ovi Store not working after the Symbian Anna update?
This problem is linked to incompatibel QT components. Please do the following:
SolutionA:
-          Install the following QT files on the C: drive of your phone in exactly this sequence
        * http://dl.nokia.com/ns/sdo/QtSA4.7.301.sisx
        *http://dl.nokia.com/ns/sdo/QtWebkitSA4.8.0.sisx
         *http://dl.nokia.com/ns/sdo/QtMobilitySA1.1.301.sis
-          While you install above QT files you MUST keep the following things in mind:
*Installation must be done to C: drive of the phone. If you by mistake select E: drive, you can cancel the installation and re-install again. If E: drive installation is complete, you can re-install one more time and select C: drive for installation.
*Installation order must be met. First it has to be QT (QtSA4.7.301.sisx).
-          Start Ovi Store
B) Solution2:
- Launch the File manager on your phone (Typically found: Menu -> Applications -> Office -> File mgr.)
- Choose Options -> Find -> E: Mass memory -> Root folder
- In the “Find text:” window, type “*.sisx” (without double quote) and the select find.
- It will display many sisx files starting with “TMP”. Example: TMP3efa4.sisx.
- Now select Options -> Mark multiple items and now mark all sisx starting with “TMP”.
- After marking them select Options -> Delete and delete all of them.

Why does Software Update want to install ProKit Update when I don't have any of the listed apps?

Software Update just prompted me to install ProKit Update 7.0. I don't have any of the applications listed in the description. I searched for each with Spotlight just to make sure. My Macbook has only a clean install of Snow Leopard, Microsoft Office 2008, and Xcode 4.0.2. Why am I being prompted to install this update?
Extracted from the description: This update is recommended for users of Final Cut Pro, Motion, Soundtrack Pro, DVD Studio Pro, iPhoto, Aperture, Final Cut Express, Logic Pro, MainStage, Logic Express and iAd Producer.

Linc Davis wrote:
It doesn't check whether any of those applications are installed. All Macs come with iPhoto. You may have removed it, but SU doesn't know that.
I do not have iPhoto installed and it was never installed. iPhoto is part of iLife, which is on disc #2. I slicked the disk and did a clean install of Snow Leopard using only disc #1. I am surprised that Software Update doesn't check what is installed so it knows what update to install, I thought that was the whole point of Software Update. It seems to know what hardware drivers are installed and will only install updates for those specific drivers. But fine with me, I will install that update.

Mail crashing after doing software update

The Mail application now constantly crashes since doing the Software Update and updating the iLife 06 components.
I am getting the following error message:
"Program received signal EXCBADACCESS, Could not access memory.
Reason: KERNINVALIDADDRESS at address: 0x7472756d
0x95895d64 in KWQFontFamily::KWQFontFamily ()"
Can someone please help me get Mail working again???
Thanks!!!

Given everything you have done so far, it may be a more simple path to simply reinstall Safari and Mail. Have a look at this post for how to extract these applications from your installer DVD. In the post, I mention the combo updater for 10.4.4. Use the combo updater for 10.4.5. Hopefully, this resolves whatever is causing the crashes. Please post back with results.
"have never made a clone copy of my system "
Two years ago, I had one of the worst computing experiences. I lost all of my computer information from a hard disk failure. I did not have a backup. Learned the lesson quickly. I purchased an external HD for $150 (you can certainly do better with the price) and SuperDuper for $20. Made backing up the system very simple and quick (after the initial backup). Has been a huge time saver on a few occasions where I have needed to retrieve an file(s). Also, gives me peace of mind knowing I have options for data recovery. I encourage you to create a backup strategy.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.5) LaCie 160gb d2 HD

What does software update 1.22 fix?

Similar Messages

Maybe you are looking for