What does "special i/o for pci card" do?

And why arent there PCI Latency setting available in BIOS for Neo2?
thx!

I also could not see the option in BIOS. But could use the software PCI Latency Tool to adjust it. 

Similar Messages

  • Does Apple make a wireless pci card for the G5?

    I have a new Airport Extreme base station, but my PowerMac G5 still has the old airport pci card. Does Apple make an "n" pci card that I can use to swap out my old wireless card?

    No. Apple does not have an 802.11n solution for your PowerMac G5.

  • What does it take to build smart card applications?

    Just out of interest I was wondering what does it take to build smart card applications:
    - Can I do it at home with my PC or do I have to have access to expensive hardware?
    - How difficult is it to master given that I do it on my own with no help. Does it involve a lot of hardware issues?
    - If hardware is required (a smart card and a cable connection), where do I get it and how much does it cost?

    Let me rephrase my question.
    I understand that the deployment process may not be so easy. That does not disturb me.
    I just want to know whether I'll experience hardware probelms. If reading/writing to the card involves putting it inside and taking it outside from the device just like a floppy disk without any complications, then I don't have any worries.
    By the way, does the reader device is used for both reading AND writing?

  • Y-splitter cable for PCIe card

    I am considering a Dynex 2-Port FireWire 800 and 1-Port FireWire 400 PCIe Adapter (DX-PCI2PF) for my Mac Pro. The card has a 4-pin power connector to receive extra power, if desired.
    Where can I find a cable that goes from one of the power connectors on the motherboard of the mac Pro, split it, and one of the Y legs go to the 4-pin connector on the card?
    I could do without a Y. But, since one of the power connectors on the motherboard is already used for a 2nd video card, I would like to give myself an extra power connection after installing the Dynex card.

    *The hatter* - Thanks for your quick reply!
    Actually, I was looking at this card on eBay:
    http://cgi.ebay.com/Dynex-2-Port-800-1-Port-400-FireWire-PCIe-Adapter-DX-PCW0QQitemZ330419493351QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item4cee8959e7#h t_775wt941
    The description states "Built-in 4-pin power connector for receiving extra power supply." That's why I became curious.
    The FW800 port on the back of my Mac Pro is already used to connect to a FW800 hub that is 15 feet away. And, I want to have at least two more FW800 ports to attach (1) OWC's Mercury On-The-Go Pro drive and (2) MacBook Pro in Target Disk Mode.
    For my purpose, do you know that these PCIe cards would not need extra power supply?
    Also, what would one connect to these PCIe cards that necessitates extra power supply?

  • What does it WF_EVENT_OJMSTEXT_QH use for?

    Dear all:
    I found the error in the alert_log:
    *** 2010-08-05 16:13:26.608
    *** SESSION ID:(572.533) 2010-08-05 16:13:26.608
    Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x2a96b75000, PC: [0x10efcdf, kdkbin()+223]
    *** 2010-08-05 16:13:26.612
    ksedmp: internal or fatal error
    ORA-07445: exception encountered: core dump [kdkbin()+223] [SIGSEGV] [Address not mapped to object] [0x2A96B75000] [] []
    Current SQL statement for this session:
    begin WF_EVENT_OJMSTEXT_QH.enqueue(:v1, :v2); end;
    ----- PL/SQL Call Stack -----
      object      line  object
      handle    number  name
    0x2d3fda4a8       204  package body SYS.DBMS_AQ
    0x2edfb5e38       980  package body APPS.WF_EVENT_OJMSTEXT_QH
    0x2edfbecf8         1  anonymous block
    0x2ebc2ddb8      1720  package body APPS.WF_EVENT
    0x2ebc2ddb8       668  package body APPS.WF_EVENT
    0x2ea538c30       229  package body APPS.WF_RULE
    0x2ed36d538        31  package body APPS.FND_BES_PROC
    0x2ed374d60         1  anonymous block
    0x2ebc2ddb8       443  package body APPS.WF_EVENT
    0x2ebc2ddb8      1599  package body APPS.WF_EVENT
    0x2ebc2ddb8      2372  package body APPS.WF_EVENT
    0x2ebc2ddb8       700  package body APPS.WF_EVENT
    0x2ed39d3a0      4990  package body APPS.FND_FLEX_SERVER
    0x2efd60840         3  anonymous block
    ----- Call Stack Trace -----
    I've been raised the SR for this case ,and also install the Patch 6047085, the issue still happened. The ORACLE ask me: what kind of object this is, what is the owner etc? How is this object called? Can someone can tell me what does the WF_EVENT_OJMSTEXT_QH use for? or any article to introduce it?
    my environment : ebs 11.5.9
    database : oracle 9.2.0.8 64bit
    platform: linux redhat 4.0
    Regards
    Terry

    Hi Srini:
    Thank you for your reply.
    Not sure why Support is asking you about this object - they should be the one providing you the answers ;-)-- I feel confused too. This issue last for one month and still have no idea for this case.
    Pl see if MOS Doc 1073171.1 (ORA-7445 [kdkbin()+223] on Linux x86-64 platforms on 9i release) is relevant in your case.--- I've been apply the patch, but no help.
    Regards
    Terry

  • What does symbol ! stand for in the following code?

    What does symbol *!* stand for in the following code? What does SYSTEM mean?
    <! DOCTYPE report-group SYSTEM "report-group.dtd">
    Edited by: user11337968 on Jul 3, 2009 4:53 PM

    It is just part of the XML specification; to do a "doctype", you must have an open angle bracket followed by an exclamation point. See [doctype decl | http://www.w3.org/TR/REC-xml/#NT-doctypedecl] for more information.
    Peace,
    Cameron Purdy | Oracle Coherence

  • ACR 4.4, ACR 3.3...What does the "ACR" stand for ?

    In the Camera Calibration tab in Camera Raw or Lightroom, we can choose the profile from the menu.
    There are so many profiles in the menu, ACR 4.4, ACR 3.3...What does the "ACR" stand for ?

    ACR x.x designates an older style of profile where Adobe named their profiles for the version of Adobe Camera RAW that first supported the camera--basically the vintage of the profile, so if Adobe updated the profile then you'd be able to pick whether you wanted the old one or the new one.

  • What does Apple mean by "For best battery performance, leave your device connected to a power source until the restore is complete."

    I just recently returned an IPad air and exchanged it for another. I first set up this new one as a new IPad but then deleted all content and settings right away (since I wasn't getting the progress I had made in apps and games) in order to restore it from my previous IPad Air. I then checked after on how to backup via icloud and saw this line under the subtitle of how to restore from a backup, "For best battery performance, leave your device connected to a power source until the restore is complete." What does Apple mean by "for best battery performance"? Im just a bit worried of issues.
    p.s. And yes I did have it connected to the power. And the ios is the default ios for new IPad Airs.

    Welcome to the Apple Community.
    It only means you should restore whilst it is connected to a power supply, so that your battery doesn't go flat during the process.

  • What does the owner use for?

    What does the owner use for?
    owner such as those found in:
    JWindow(Frame owner)
    JWindow(Window owner)
    and more.

    ah... i'm creating a splash with a JWindow and set it with a no owner and it shows the splash then proceed to the showing of the gui is it ok? or will there be problems?

  • HT4623 what does the mm stand for on my model of ipad mini?

    what does the mm stand for on my model of my ipad mini that is also cellulat?

    Copied from another discussion, from Phil0124
    The MM or Millenium Media according to what I can find, refers to the CDMA variation of the Cellular iPad for Verizon Networks.
    The non MM version is for GSM carriers like AT&T.
    https://discussions.apple.com/thread/5093889?start=0&tstart=0

  • HT201471 What does the (MM) stand for ie  wi-fi+cellular(MM)?

    What does the (MM) stand for ie:wi-fi+cellular (MM)?

    I don't know what the "MM" stands for specifically, but those are the CDMA models, A1455 for the mini and A1460 for the 4th-gen iPad Retina.
    Regards.

  • What does the "1" stand for on the Aperture Icon?

    A 3.4  What does the "1" stand for on the Aperture Icon?

    As far as I see, the red number shows that the recipient has accepted the stream.  If you delet the stream the red number is gone.
    I am not sure -this may be a coincidence: Yesterday I saw the red number "1" appear everytime I received a notification when a comment was added to one of the images I posted. When I read the comment, the number went away. The number is gone now, but I still have the stream.

  • What does the "s" stand for in iPhone4s

    What does the "s" stand for in iPhone4s??

    Yes, that is correct. There is no right answer 100%. I don't really know how to explain it. But you have to see where I am coming from. I guess you can think about it like this. S is a word. The word was defined as speed 2 years ago. Now it is being used again. Since S was already defined it does not need to be defined again. It just makes sense that apple would be consistent in their product names.
    But that isn't what they said. They said "that's the probmlem i'm having with people saying its siri.." In other words, that's why I am not so sure siri is the correct answer. They are just curious, that's all. If someone said, "The iPhone is to die for" would you think they would actually die for an iPhone? Like I said, just relax. You don't need to go attack people by saying that they need mental help when they are just curious about something.
    However, you are entitled to your opinion. I have presented my case and you seem to be getting pretty upset over my comments so I think this whole thing should be let go. There are plenty of posts here for the OP to make a decision for themselves and if he/she needs more clarification he/she will ask.

  • What does the "R" stand for in part number WS-C2924-XL-R

    What does the "R" stand for in part number WS-C2924-XL-R?

    Oh they would be boulders not stones.....
    Yeah...only 18 stones here...maybe a couple more  
    I forget you are in Austrialia....it is Stone there.... I though it was Kilos...we do Pounds.
    Mike

  • What does the symble "%" stand for?

    In the following command, What does the symble "%" stand for?
    # fg %2

    http://www.linuxtraining.org.uk/SAObj5.pdf
    Guido

Maybe you are looking for

  • Incorrect Grade Scales and Scale Rates

    Hi Gurus Could you please give me your input on the following issue: My client is a South African government department and are using Pay Scales, Scale Rate (Point values), and Grade Rates (Grade Steps and Points) for Pay progression etc. They went l

  • XQuery contains function failing due to carriage return in XML

    I am trying to perform the following xquery: declare namespace tei="http://www.tei-c.org/ns/1.0"; for $line in //tei:l where some $value in $line satisfies (contains($value, "A cherdd, myn Siat")) return $line this works fine for almost all cases exc

  • PSE how to have photo automatically resize the a 12 X 12 background document

    I was told that when you drag a photo onto a 12x12 document it will automatically resize to the 12 x 12. When I do it in PSE the photo is small...and asking me to transform it. Is this different within these two programs or is there a work around in

  • How to save pdf files to skydrive/PC on Windows Phone 7.8?

    I cannot save my pdf files to skydrive or PC on my Nokia Lumia 800 which runs on Windows Phone 7.8. I mean there is no option provided by Adobe on WP 7.8, to save/have a backup of pdf files. When is Adobe going to provide this most important feature

  • Event ID 8313

    Recently I have noticed that the following error log shows up on WFEs event viewer - SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure Looking at similar other issues, I figured that the app server is trying to use (a p