What does the AC Adapter for the WD My Cloud Look Like?

I have the WD My Cloud 3TB Part Number: WDBCTL0030HWT-00 I unplugged all my network equipment and went back to plug them in once everything was rearranged. But I have 2 AC to DC adapters that use the same plug, so I don't know which one is the right one. I personally think it is stupid not to put a WD logo on the AC adapter due to situations like this. But I usually mark these myself. I suppose I was in too much of a hurry to get it online to mark it this time. Nevertheless, I have two adapters, both produce 12 volts. I does 1.5A and the other does 1A. The one that outputs 12V & 1.5A is by Ktec: Model KSAS0241200150HU The one that outputs 12V & 1A is by Leader Electronics, Inc.: Model MT12-Y120100-A1 Anyone know which is the correct one? One (the 1.5A) would hang down from the wall socket while the other one (1A) shoots off to the side of it.

Hello,
The power adapter specs are:
12 Volts
1.5 Amps
18 Watts
Take a look a these links:
18 Watt Adapter (Available at the WD Online Store)
Power Adapters for WD Products

Similar Messages

The wall adapter for the palm pre charger

can the wall adapter for charging the palm pre also be used with an ipod touch charge cord? both are usb ends that can plug into the wall adapter

Standard warning label caveat: You CAN use these chargers interchangeably as long as both devices use micro USB technology, and not mini USB. (Basically don't force the charger in the charging port.) However, it is recommended that you only use chargers and equipment designed for and that came with your device.

Will the HDMI adapter for the Ipad serve as an output AND an input?

I do a lot of video productions and could use an extra moniter on site. The camera I use has an HDMI out, and I noticed there is an HDMI adapter for the Ipad. Would the Ipad recieve/display the signal being sent from my camera? If not, is there another way?

The Apple Digital AV Adapter only output to TV. It cannot be tethered to a camera.

HT4241 how do i watch netflix from my macbook to a vizio hdtv bought the hdmi adapter for the hdmi cable

How do you watch netflix from your macbook to your hdtv

Have you selected the appropriate input from the TVs perspective using the TV remote? If that isn't enough, check the settings in System Preferences > Displays, and if you don't have sound, System Preferences > Sound.

How do I use the charging adapter for the UK

I just received an HTC Droid rental for use in the UK next week. I'm confused about the charging adapters that came with it. Do I just plug the United States USB charger into the UK wall adapter and that's how one uses it?

Ok. Thank you
Sent from my iPhone

Network adapter for the private interface for RAC

Hi guys
This is the specification for the Network adapter for the private interface in RAC:
The network adapter for the private interface must support the user datagram protocol (UDP) using high-speed network adapters and a network switch that supports TCP/IP (Gigabit Ethernet or better).
Do you have a document where I can have more deep details about it ?
Thanks

user2931261 wrote:
This is the specification for the Network adapter for the private interface in RAC:
The network adapter for the private interface must support the user datagram protocol (UDP) using high-speed network adapters and a network switch that supports TCP/IP (Gigabit Ethernet or better).Note that TCP is also used in addition to UDP over the Interconnect. As for the statement that the NIC must support UDP - wrong statement to make. The NIC does not support UDP. The IP (Internet Protocol) stack does. The NIC supports the bottom layer of the ISO model. UDP is at layer 4.
As for your Interconnect, you have two basic choices. Gigabyte Ethernet or Infiniband.
For GigE you need of course a GigE NIC and a GigE switch, and a cable to wire the NIC into the switch.
For Infiniband you need a HCA card (e.g. Mellanox InfiniHost PCI card) and an Infiniband switch. As HCA cards are dual port, it make sense to get 2 cables and wire both ports into the switch and bond those 2 ports as a single logical NIC. You can run IPoIB (IP over Infiniband), which means that the 2 ports on the HCA will be seen by the o/s as NICs - and bonding is supported which enables you to create a single logical NIC on top of these 2 NICs and thus have full redundancy.
Also note that GigE typically is only 1Gb/s. 10 Gb/s is available, but expensive (especially the switch). Infiniband typically is QDR rate today that provides you with 40Gb/s pipes. So each port on the HCA will be 40Gb and the bonded port will thus be 2x40Gb/s.
Infiniband is a lot faster and more scalable for an Interconnect than GigE.
Also, because of the capacity and flexibility and low latency of Infiniband, you can also use it for your storage fabric layer (running your storage protocol over it).
Typically you will need to get HBA cards (dual fibre port) to wire the RAC node to the storage array's fibre channel switch. These HBA ports are 2Gb/s.
You can eliminate these HBAs and fibre cables by using a storage protocol like SRP (Scsi RDMA Protocol - RDMA=Remote Direct Memory Access) - running SRP over your Infiniband infrastructure, together with your Interconnect.
This is btw what Oracle's Database Machine and Exadata Storage servers use (and one the reasons they have broken all RAC performance records).

Is anyone having a problem connecting 400 firewire thru an adapter for the 800 firewire port on a Macbook Pro 2011? It does a kernel panic every time I connect it. Is there a "proper way" to connect it?

Is anyone having a problem connecting 400 firewire thru an adapter for the 800 firewire port on a Macbook Pro 2011? It does a kernel panic every time I connect it. Is there a "proper way" to connect it? Just in case it makes a difference I am trying to hook up an Avid Mbox Pro for Pro tools.

What is the part number and model of Firewire adapter?
I have used them in the past without any problems whatsoever.
Allan

What is Microsoft Document Connection for the Mac? What does it do?

What is Microsoft Document Connection for the Mac? What does it do?

http://lmgtfy.com/?q=What+is+Microsoft+Document+Connection+for+mac

Does anyone know if there is an adapter for the new nano iPod to connect to a FS-2 iPort?

Does anyone know if there is an adapter for the new nano iPod to connect to a FS-2 iPort?

IIRC the very original Bose Dock had the old 30 pin wiring and was designed initially for the iPod
If you have that version then you will need a converter to the later wiring ( sans firewire) as in Scosche .
and then the 30 pin to lightning Apple adapter
In theory it should work but who knows.
If you have a later one which already works with current devices then just the lightning adapter
It is important to get the genuine Apple adapter I have several and all work fine in several scenarios
Avoid the eBay knock offs most only charge

What does symbol ! stand for in the following code?

What does symbol *!* stand for in the following code? What does SYSTEM mean?
<! DOCTYPE report-group SYSTEM "report-group.dtd">
Edited by: user11337968 on Jul 3, 2009 4:53 PM

It is just part of the XML specification; to do a "doctype", you must have an open angle bracket followed by an exclamation point. See [doctype decl | http://www.w3.org/TR/REC-xml/#NT-doctypedecl] for more information.
Peace,
Cameron Purdy | Oracle Coherence

What does Apple mean by "For best battery performance, leave your device connected to a power source until the restore is complete."

I just recently returned an IPad air and exchanged it for another. I first set up this new one as a new IPad but then deleted all content and settings right away (since I wasn't getting the progress I had made in apps and games) in order to restore it from my previous IPad Air. I then checked after on how to backup via icloud and saw this line under the subtitle of how to restore from a backup, "For best battery performance, leave your device connected to a power source until the restore is complete." What does Apple mean by "for best battery performance"? Im just a bit worried of issues.
p.s. And yes I did have it connected to the power. And the ios is the default ios for new IPad Airs.

Welcome to the Apple Community.
It only means you should restore whilst it is connected to a power supply, so that your battery doesn't go flat during the process.

I am having difficulty charging my iphone with the cable. Its been 1 yr since I bought the phone. Does the cable becomes useleless after a year. Whats the life span for the cable?

I am having difficulty charging my iphone with the cable. Its been 1 yr since I bought the phone. Does the cable becomes useleless after a year. Whats the life span for the cable? It automatically gets disconnected and then get connected again.

That is shorter than normal. Any signs of wear? And you're sure it's the cable, not one of the pins in the iPhone's charging port?

I have a tolino vision 2 and cant copy the e-books from my pc to the tolino. I have the same adobe ID for the tolino and for the PC. I get the message I'm not authoriesed to copy, and/ or my adobe ID does not fit/match to the one at my PC. What can do? C

I have a tolino vision 2 and cant copy the e-books from my pc to the tolino. I have the same adobe ID for the tolino and for the PC. I get the message I'm not authoriesed to copy, and/ or my adobe ID does not fit/match to the one at my PC. What can do? Can someone answer in German?

I suspect you will want to ask your question at the forum for Adobe Digital Editions which is eBook, eBook reader device focused.
Be well...

I am trying to use the liquify tool for the first time. I created a new document (RGB/8) and before I place my photo, the liquify option is available. After I place the photo, the liquify option disappears. What am I doing wrong?

I am trying to use the liquify tool for the first time. I created a new document (RGB/8). Before I place my photo, the liquify option is available. After I place the photo, the liquify option disappears. What am I doing wrong?

What am I doing wrong?
For one thing you forgot to mention the version of Photoshop you use.
Did you place the image as a Smart Object? Liquify got Smart-capabilities with Photoshop CC.

What's the power Adapter for Macbook pro 13inch Mid 2012

What's the power Adapter for Macbook pro 13inch Mid 2012 with core i-7, 2.9ghz, 8Gb ram?
AFAIK it should be a 60wat Megasafe power adapter.
But mine shipped with a 45Watt Megasafe. I got it as a Gift from my friend.
Thanks in Advance.

mmaumio wrote:
60W MagSafe power adapter with "L" style connector
This should be my Adapter right?
Yes.
There is a drawback in addition to taking a longer time to charge up your MBP. In unusual instances when using your MBP with power adapter attached, and running a very heavy load on the CPU/GPU, the MBP will require additional electrical resources in addition to what the power adapter can provide. It will then draw upon the battery. What this means is that using a 45 watt adapter, these conditions are more likely to occur.
Using a 45 watt adapter should not harm your MBP as such.
Ciao.

What does the AC Adapter for the WD My Cloud Look Like?

Similar Messages

Maybe you are looking for