What does the config.0.trc file indicate?

In the manual installing hotfixes for Patch 4 ep 6 sp2, it tells you to check the configmerge in the file config.x.trc (x being the latest version). The file is located in the <j2eeinst>/cluster/server directory. Can anyone tell me what this file indicates?
Thanks ,
Jeremy

After installing a patch with SDM, when you restart the irj node is when the configmerge begins. During this phase you can monitor how the configmerge is going by checking the file config.x.trc as mentioned in the docs. Open it in notepad, look at the end of the file and you should see which component is being deployed and the total number to be deployed ( X out of Y ). You can also notice if any error occured during the merge.
From my experience however you don't necessarly need to refer to this file. When the icon for the irj node in the J2EE administration console turns from a running man into a checkmark is a sign that the merge has finished.
Hope this helps!

Similar Messages

What does the "yellow section" "other" files mean under hard disk storage?

what does the "yellow section" "other" files mean under hard disk storage?

david just to right of your initial post is a column entitled "More Like This." Check out some of the posts that seem similar.

What does the message "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired" when repairing disk permissions?

What does the message "Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired" when repairing disk permissions?

It's just a status message, albeit a misleading one, and can be ignored.
http://support.apple.com/kb/TS1448
Regards.

What does the error message "Opening file in iCloud(state=5) mean?

I have been ushing iCloud to backup my data for Ascendo DataVault for my iPhone 5 (iOS 7.0.4) and original iPad (iOS 5.1.1) very successfully for some time. Both devices are synchronized with my PC using Wi-Fi. The DataVault data on my PC is also synchronized on my wife's iPhone 5 (iOS 7.0.4) and iPad Mini (iOS 7.0.4). Recently, every attempt to synchronize my iPhone or iPad with my iCloud results in the error message "Opening file in iCloud(state=5)," but my wife's iPhone and iPad continue to synchronize with her iCloud without any problems. What does this error message mean, and is there a cure for the problem?

OK found a solution!
It is really lame!
NEVER add a reminder in iCal dragging them into the Week or Day view!!!
Change to Month view and then drag the reminder on the desired day!
You can now change to Week or Day view and move the reminder to the selected hours.
Please help share this solution and click like to get Apple to finally fix this issue, which is clearly on their side.
Thank you

What does the padlock on a file icon mean?

I am running LabVIEW 2011 SP1. In Windows Explorer some of my files (both .vi and .lvproj) have a small padlock on the file icon. The files open fine and aren't broken. What does this icon represent?
Attachments:
medium icon.jpg ‏3 KB

TheMarko wrote:
Its not read-only. It is in our source control, but it is not checked out.
If it isn't checked out, then it should be locked. Hence the padlock.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

What does the "Copy error code files" option do in the build spec properties

I have the "Copy error code files" checked for my application build specification but when I run my EXE on a different computer and call the simple error handler, I don't get the custom error from my computer's
C:\Program Files(x86)\National Instruments\LabVIEW 2012\user.lib\errors\User-errors.txt file. Instead I get the "this error code is undefined" explaination.
I've also tried including that file in the "always included" section of the build spec but that didn't work either. Am I missing something?
CLD (2014)

Infinite,
Check out this link:
http://www.ni.com/white-paper/3209/en
Specifically this paragraph:
"When building an executable (EXE) or shared library (DLL) with the Application Builder, make sure to add the custom error file as a support file (under the Source Files tab). For an executable, the custom error file will be saved in the <executable destination directory>\user.lib\errors directory. For a shared library, the custom error file will be saved in the National Instruments\Shared\LabVIEW Run-Time\<version>\Errors directory. When distributing a shared library, make sure to install the custom error file in this directory."
James K.
National Instruments
Applications Engineer

What does the "@" symbol after the "rwx" UNIX file permissions mean?

Greetings All,
I tried to run the Alliance VLSI CAD system using an example (examples/alliance-examples/multi16b-reg), but have not been able to.
It complains that the file "vasy" cannot be executed as a binary file.
Here is the transcript from the Terminal session.
Go Trojans >make all
MBKWORKLIB=.; export MBKWORKLIB; MBKCATAL_NAME=NOCATAL; export
MBKCATALNAME;
/Applications/apps/eda/alliancevlsi_cad_sys/downloadfiles/opt/alliance-5.0/bin/vasy
-a -B -L -o -p -I vhdl multi16
/bin/sh: /Applications/apps/eda/alliancevlsi_cad_sys/downloadfiles/opt/alliance-5.0/bin/vasy:
cannot execute binary file
make: * [multi16.vbe] Error 126
Go Trojans >
When I run "ls -al" in $(ALLIANCE_TOP)/bin, I get the following in
the Terminal.
Go Trojans >ls -al
total 17656
drwxr-xr-x@ 52 zhiyang staff 1768 Sep 2 2009 .
drwxr-xr-x@ 12 zhiyang staff 408 Apr 12 16:24 ..
-rwx------@ 1 zhiyang staff 108129 Sep 2 2009 a2def
-rwx------@ 1 zhiyang staff 12219 Sep 2 2009 a2lef
-rwx------@ 1 zhiyang staff 8713 Sep 2 2009 alcbanner
-rwx------@ 1 zhiyang staff 135645 Sep 2 2009 asimut
-rwx------@ 1 zhiyang staff 24975 Sep 2 2009 attila
-rwx------@ 1 zhiyang staff 25747 Sep 2 2009 b2f
-rwx------@ 1 zhiyang staff 157479 Sep 2 2009 boog
-rwx------@ 1 zhiyang staff 111598 Sep 2 2009 boom
-rwx------@ 1 zhiyang staff 106837 Sep 2 2009 cougar
-rwx------@ 1 zhiyang staff 568722 Sep 2 2009 def2a
-rwx------@ 1 zhiyang staff 251206 Sep 2 2009 dreal
-rwx------@ 1 zhiyang staff 20138 Sep 2 2009 druc
-rwx------@ 1 zhiyang staff 40808 Sep 2 2009 exp
-rwx------@ 1 zhiyang staff 30100 Sep 2 2009 flatbeh
-rwx------@ 1 zhiyang staff 9975 Sep 2 2009 flatlo
-rwx------@ 1 zhiyang staff 9959 Sep 2 2009 flatph
-rwx------@ 1 zhiyang staff 10746 Sep 2 2009 flatrds
-rwx------@ 1 zhiyang staff 20588 Sep 2 2009 fmi
-rwx------@ 1 zhiyang staff 20425 Sep 2 2009 fsp
-rwx------@ 1 zhiyang staff 9962 Sep 2 2009 genlib
-rwx------@ 1 zhiyang staff 2455 Sep 2 2009 genpat
-rwx------@ 1 zhiyang staff 412314 Sep 2 2009 graal
-rwx------@ 1 zhiyang staff 10881 Sep 2 2009 k2f
-rwx------@ 1 zhiyang staff 78387 Sep 2 2009 l2p
-rwx------@ 1 zhiyang staff 108420 Sep 2 2009 loon
-rwx------@ 1 zhiyang staff 33889 Sep 2 2009 lvx
-rwx------@ 1 zhiyang staff 36842 Sep 2 2009 m2e
-rwx------@ 1 zhiyang staff 55347 Sep 2 2009 mips_asm
-rwx------@ 1 zhiyang staff 65038 Sep 2 2009 moka
-rwx------@ 1 zhiyang staff 2448244 Sep 2 2009 nero
-rwx------@ 1 zhiyang staff 2172602 Sep 2 2009 ocp
-rwx------@ 1 zhiyang staff 14498 Sep 2 2009 pat2spi
-rwx------@ 1 zhiyang staff 9887 Sep 2 2009 pdv
-rwx------@ 1 zhiyang staff 51121 Sep 2 2009 proof
-rwx------@ 1 zhiyang staff 178806 Sep 2 2009 ring
-rwx------@ 1 zhiyang staff 60506 Sep 2 2009 s2r
-rwx------@ 1 zhiyang staff 37106 Sep 2 2009 scapin
-rwx------@ 1 zhiyang staff 12324 Sep 2 2009 sea
-rwx------@ 1 zhiyang staff 13430 Sep 2 2009 seplace
-rwx------@ 1 zhiyang staff 12276 Sep 2 2009 seroute
-rwx------@ 1 zhiyang staff 82653 Sep 2 2009 sxlib2lef
-rwx------@ 1 zhiyang staff 77310 Sep 2 2009 syf
-rwx------@ 1 zhiyang staff 301653 Sep 2 2009 vasy
-rwx------@ 1 zhiyang staff 11854 Sep 2 2009 x2vy
-rwx------@ 1 zhiyang staff 12392 Sep 2 2009 x2y
-rwx------@ 1 zhiyang staff 174556 Sep 2 2009 xfsm
-rwx------@ 1 zhiyang staff 167747 Sep 2 2009 xgra
-rwx------@ 1 zhiyang staff 185034 Sep 2 2009 xpat
-rwx------@ 1 zhiyang staff 249181 Sep 2 2009 xsch
-rwx------@ 1 zhiyang staff 178627 Sep 2 2009 xvpn
Go Trojans >
I suspect the "@" symbol indicates why the executables cannot be
run, even though the file permissions are set correctly.
How do I get rid of the "@" symbol for these files? What does the "@" symbol mean?
Thank you.
Message was edited by: Zhiyang

OK... Well, do you know what else may cause the problem?
Does the following help?
Go Trojans >ls -leO@
total 17656
-rwx------@ 1 zhiyang staff - 108129 Sep 2 2009 a2def
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 12219 Sep 2 2009 a2lef
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 8713 Sep 2 2009 alcbanner
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 135645 Sep 2 2009 asimut
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 24975 Sep 2 2009 attila
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 25747 Sep 2 2009 b2f
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 157479 Sep 2 2009 boog
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 111598 Sep 2 2009 boom
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 106837 Sep 2 2009 cougar
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 568722 Sep 2 2009 def2a
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 251206 Sep 2 2009 dreal
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 20138 Sep 2 2009 druc
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 40808 Sep 2 2009 exp
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 30100 Sep 2 2009 flatbeh
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 9975 Sep 2 2009 flatlo
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 9959 Sep 2 2009 flatph
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 10746 Sep 2 2009 flatrds
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 20588 Sep 2 2009 fmi
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 20425 Sep 2 2009 fsp
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 9962 Sep 2 2009 genlib
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 2455 Sep 2 2009 genpat
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 412314 Sep 2 2009 graal
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 10881 Sep 2 2009 k2f
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 78387 Sep 2 2009 l2p
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 108420 Sep 2 2009 loon
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 33889 Sep 2 2009 lvx
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 36842 Sep 2 2009 m2e
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 55347 Sep 2 2009 mips_asm
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 65038 Sep 2 2009 moka
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 2448244 Sep 2 2009 nero
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 2172602 Sep 2 2009 ocp
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 14498 Sep 2 2009 pat2spi
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 9887 Sep 2 2009 pdv
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 51121 Sep 2 2009 proof
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 178806 Sep 2 2009 ring
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 60506 Sep 2 2009 s2r
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 37106 Sep 2 2009 scapin
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 12324 Sep 2 2009 sea
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 13430 Sep 2 2009 seplace
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 12276 Sep 2 2009 seroute
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 82653 Sep 2 2009 sxlib2lef
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 77310 Sep 2 2009 syf
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 301653 Sep 2 2009 vasy
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 11854 Sep 2 2009 x2vy
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 12392 Sep 2 2009 x2y
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 174556 Sep 2 2009 xfsm
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 167747 Sep 2 2009 xgra
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 185034 Sep 2 2009 xpat
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 249181 Sep 2 2009 xsch
com.apple.quarantine 42
-rwx------@ 1 zhiyang staff - 178627 Sep 2 2009 xvpn
com.apple.quarantine 42
Go Trojans >
They all seem to end with "com.apple.quarantine". What does this mean?

What does the open file dialog do 'under the hood' and is there a way to simulate it

What does the open file dialog do 'under the hood' and is there a way to simulate it?
I have a bug in my code (that I've posted about before, here) which I can't fix at the moment, but I do have a workaround.
Briefly, the bug:
I call a dll from a function node, to initialise and run a spectrometer. If I start up the PC, LabVIEW and run my vi the code runs without complaint, the first call to the dll to initialise the spectrometer doesn;t return an error but the spectrometer is not detected either.
I've tried various solutions, see the link above, and none work
The workaround:
If, at any time before running the code containing the function node I open an 'open file' dialog window, select the dll and click ok/hit enter then everything is fine. When I run the main code the spectrometer is detected.
I use an express vi to open the file dialog, I specify the start path and file name as constant inputs and just click ok/hit return when the dialog pops up. I don't do anything with the dialog outputs. In fact the vi that contains the open file dialog can be run before the project containing the bug is even open.
I have to do this everytime I turn the PC on.
So, either
1) Can somewone suggest a fix for the original bug?
2) What is the easiest way to simulate the enter keypress when the open file dialog pops up
or
3) Can someone tell me what the open file dialog does under the hood that somehow causes the dll to work and can it be simulated in straight LabVIEW
I suspect that the dll itself is dodgy ( I have in the past talked to the supplier but not got very far, and I will try again but I would like a quick, temporary solution too). I'm guessing that the file dialog is making some kind of check on the file, and possibly registering its presence with the OS (winXP). I tried using the file/folder exists vi to see if checking the file like that worked but no luck.
Any help greatly appreciated.
Dave

Hi David
I am very conscious about thread hijacking but this sounded like my issue so I hope you dont mind me asking about your issue. I am hoping that you have a spectrometer from the same vendor as me and its not just me seeing an Error 1097 issue. My spectrometer is from a company called Stellarnet.
So far I have unable to get it to work with other VIs. There is one condition where I can get it to work but its no good for me.
Case 1
I open the VI in a fresh labview environment with no other VIs in memory. The code runs with no issue.
Case 2
Labview is not opened. I double click the spectrometer VI in windows explorer. The VI opens but it fails to run resulting in Error 1097. Personally, I dont see the difference between this and Case 1 above and yet it fails.
Case 3
If I already have other VI's in memory and try to load the spectrometer VI and run it fails with Error 1097. This case is the one that most important to me. I have a test executive that will load test VIs dynamically and I can't get this to work. Same problem Error 1097.
I wanted to share what I have seen with you and to let you know that maybe somebody else has the same issue. I am convinced its the DLL but the vendor dis-agreed saying it was LabVIEW. I couldn't convince him otherwise.
Thanks in advance
David

What does the HSTS.plist file in the Cookies folder in /Library ?

What does the HSTS.plist file in the Cookies folder in /Library ?
If I open it in TextEdit it is filled with sites I never have visited.
Does anybody know where this file is used for ?
Thanks

I also have this file in the same folder in the same location with two other 'documents' called:
1. com.apple.appstore.cookies
2. Cookies.binarycookies
Document type shows as 'OOPlistDocumentType'.
Yes lots of website addresses and at least one known spam tel number. The top line of the text when opened by TexEdit is as follows:
bplist00“ ∑_ )com.apple.CFNetwork.defaultStorageSession_ !hstsd Disk Storage Schema Versionﬂ ±
This is a bit of a worry ........

What does the error "Unable to lock the following files:" mean?

What does the error "Unable to lock the following files:" mean? After the colon in this error message, a path to the .icml file is listed. We are using InDesign CS6 with InCopy CS6 (Mac), assignment-based workflow, on a shared server.
Thanks,
Gita M

Sounds like a permissions issue on that server.
Bob

TS1702 Some apps have a "+" symbol on the "free" download button in the apps store. What does the "+" symbol indicate?

Some apps have a "+" symbol on the "free" download button in the apps store. What does the "+" symbol indicate?

Means a universal app - one designed to work on both the iPad and iPhone/iPod touch.

What does PS use for a file browser now? I am used to using the file browser on CS1

What does PS use for a file browser now? I am used to using the file browser on CS1

Newer versions of Photoshop ships with Adobe Bridge for Organizing image files. However your not required to use it. You can also use LightRoom or system utilities like Windows File explorer and Mac Finder. Photoshop itself uses System dialogs to access your file systems files. When Photoshop display an Open or Save dialog to you in all probability its a Windows or Mac System dialog. Photoshop versions may also have some internal Photoshop Dialogs programed by Adobe for accessing your systems file systems.

I was playing with my ipad settings (it's an older model) and noted in the advanced settings of Safari there was a place to view website databases. When I clicked on this I saw websites. How do these get there and what does the space amount mean?

I was playing with my ipad settings and noted in he advanced settings of Safari there was a place to view "website databases". When I selected this I saw a multitude of websites.
Can anyone tell me how these get there? Can a website be posted even if it was never went to? What does the space amount mean? For example, 1.5 kb...is this quite a bit? Would it indicate someone has gone to a site multiple times?
I share my ipad with my teenage daughter and I'm trying to find out if she's lying to me. Obviously she's swearing that she has "no idea" how these got there and I'm trying to keep her safe (she's only 14).
Thanks everyone.
Concerned Mom

Think of your PC and the 'temporary internet folder' where it keeps cached copies of web pages or elements off a web page for 'quicker display the next time you visit'. That's pretty much what that folder is. 1.5K is tiny. Probably just a basic page with some text on it. (you might be confusing 1.5K with 1.5 megabyte....megabyte is large...it's roughly 1000 kilobytes, so the 1.5K is a tiny file)
As far as I know, the only way info gets into that folder is if the browser has been to that site.
if you have a concern there are browsers out there, McGruff is one i've seen recommended, that allow some degree of parental control and supervision. That or you could passcode lock the iPad or enable the restrictions to turn off some parts of the device to have some control.

When I see the usage on my iPod touch 4 they have categories for how much space is being used where. What does the "other" category contain? Like what could I delete on my iPod to get rid of the "other" category?

when I see the usage on my iPod touch 4 they have categories for how much space is being used where. What does the "other" category contain? Like what could I delete on my iPod to get rid of the "other" category?

What is the Other on my iPhone and How to Remove It
An "other" larger than about 1 1/2 GB usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

On my mini ipad, I cleared the cookies/histories in the safari setting. But what does the advance-setting of the clearing the website data does? What's that used for? Thank you!

On my mini ipad, when I'm on the internet -- a few times I will see a blue small pop-up boxes telling me to allow down/load or add something like the bubble-splash game or something similar. I jusr click ignore and it goes away.. I'm not sure why it's showing up lately.. I'm not sure if it's a virus or hacked in or a web brower matter..
Should I go to the cookies/histories in the safari setting and have it cleared out? Will that help resolve that??
And what does the advance-setting of the clearing the website data does? Sorry, I'm not familiar.. what's is that used for? Should I use that feature as well?? Thank you!

This indicates corrupt files.
A restore should resolve.

What does the config.0.trc file indicate?

Similar Messages

Maybe you are looking for