What does the Max Order input on the OAT Spectral Map VI really mean?
Pop open the
Hi SigPhil,
The Max order to analyze control on the Color Map tab specifies the maximum order for which you want an accurate measurement of intensity. The Color Map displays more orders than you select because it uses the additional orders for internal calculations. You can look at the Developer Zone article Performing Order Analysis with the LabVIEW Order Analysis Toolkit for more information.
Regards, Mallori M.
Mallori M
National Instruments
Global Customer Education Program Mananger
Calculate the time you will save with NI Training
Similar Messages
-
We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be able to put a date in another field that MRP can read in the event we choose to manufacture based on another date. For example, early.
Any help would be appreciated.What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
What is the max sample clock using the Shielded Single-Ended Flying-Lead Cable
Hi
What are the max practical limits for the sample clock using the Shielded Single-Ended Flying-Lead Cable?
I am playing with the Labview embedded example "Dynamic Generation and Acquisition Source Synchronou.vi" using the Shielded Single-Ended Flying-Lead Cable and the PXIe-6556.
This example write in the channels 0-7 and read in the channels 7-15.
It also export the sample clock and data active event so we have a "Source Synchronous"
I change the original example to set the input impedance to 50ohm and VH and VL voltatages.Write 3.3V - 0V and read 0.5V 0.3V.
The problem is the signal integrity at higher frequencies. Please see the picture attached.
Sample clock 30MHz
50MHz
70MHz
90MHz
Error: PLL could not phase-lock to the external reference clock.Hello engfpe,
According Hardware manual the Maximum Sample Clock rate is 200 MHz.
http://www.ni.com/datasheet/pdf/en/ds-421
Is not clear for me if your error message was received on LabVIEW or on your Agilent Scope, and I don´t know your Agilent Scopes specifications. Neither I don´t know what exactly you are trying to generate, maybe if yo ucan clarify more your application and your issue I can help you more.
Best regards, -
In Numbers, when I click on a cell I see the formula, how do I see the number I input inot the cell?
Gerald,
A cell either contains:
1) what you typed (or entered) OR
2) the result of a formula
to enter a formula, select a cell, then type the "=" sign then the formula, then enter
to enter a number oer text, then type the number(s) or text you want, then the enter key
the contents of a cell is the last thing you typed into that cell. If there was a formula, then selecting the cell and typing will result in losing the formula.
B3 will change as you modify the cell contents in B1 and B2 -
What does symbol ! stand for in the following code?
What does symbol *!* stand for in the following code? What does SYSTEM mean?
<! DOCTYPE report-group SYSTEM "report-group.dtd">
Edited by: user11337968 on Jul 3, 2009 4:53 PMIt is just part of the XML specification; to do a "doctype", you must have an open angle bracket followed by an exclamation point. See [doctype decl | http://www.w3.org/TR/REC-xml/#NT-doctypedecl] for more information.
Peace,
Cameron Purdy | Oracle Coherence -
What does 'Actuality' return when checked in the Text Element of WAD.
Hi All,
What does 'Actuality' return when checked in the Text Element of WAD?
Thanks In AdvanceI take back my qs as the qs is not valid anymore
-
what does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?
poobs wrote:
what does apple plan to do for the people with 2nd gen ipod touch who want to have facebook and other apps now only compatible with ios 5?
Nothing. The 2nd Gen Touch is OBSOLETE and is WAY past its support life. If you want to run the newer apps you have to buy a newer iPod. -
Hello,
I want to now the max. cable length that the Differential TTL signals can run in both at high and low frequencies.That is very dependant on the type of cable, its construction, and inherent impedance and capacitance. This may be of use:
http://beiied.com/PDFs2/SSI_14-15-bit-encoder_addendum.pdf
-AK2DM
~~~~~~~~~~~~~~~~~~~~~~~~~~
"It’s the questions that drive us.”
~~~~~~~~~~~~~~~~~~~~~~~~~~ -
How to get cm:search to use the max attribute when creating the SQL query?
When we use the max attribute in the cm:search tag, it does not seem to honor the max attribute when creating the SQL query. However, the result returned from the tag is limited to the number specified by the max attribute. Then the tag seems to work as intended, but the performance will be sub optimal when the SQL query returns unnecessary rows to the application.
We use the cm:search tag to list the latest news (ordered by date), and with the current implementation we have to expect a decrease in performance over time as more news is published. But we can’t live with that. We need to do the constraint in the SQL query, not in the application.
The sortBy attribute of cm:search is translated to “order by” in the SQL query, as expected.
Is it possible to get cm:search to generate the SQL query with an addition of “where rownum <= maxRows”?Hi Erik,
The behavior of a repository in regards to the search tag's max results parameter is dependent on the underlying repository's implementation. That said, the OOTB repository in WLP does augment the generated SQL to limit the number of rows returned from the database. This is done in the parsing logic. This behavior may differ with other repository implementations.
-Ryan -
Using Adobe Photoshop Elements 6:
1. How can I get the 2000 photos I downloaded in the same order as on the smart card from which I downloaded them? (This will help me label them correctly)
2. How can I change the date on each photo? (I want to sort by date the picture was taken, not the date it was downloaded.
Thank you!
Linda Berteau
[email protected]You indicated that the images "seemed" to be in the right order. It might be a good idea to rename the images on export using a custom name/sequence. If you have done that and the images are still not in order, it's possible that your operating system browsing window is using a different sort order. I sometimes change windows explorer to sort by file type, and then files are sometimes in what seems be a strange order.
-
How to get the Purchase order Qty in the object dependency
Hi,
We are using variant pricing in the purchase order. I have condition type say u201CZVBPu201D for Pallet cost. I defined Pallet cost as 5 USD per each (pallet). I have to calculate Number of pallets = Purchase order Qty/ 5. The number of pallets should be rounded to nearest integer.
My question is how to get the Purchase order Qty in the object dependency?
Is there any reference table and field can be used to get Purchase order Qty just like we use MMCOM-VKOND for variant pricing.
Appreciate your help
Thanks,
SriniHi,
1. I do not have system now so I can not conclusively tell about table field .
2. Since I did it long back so I also do not exactly remember it, there are more than one place where PO qty appears for example Item overview and Item details - one of the PO qty when used in the characteristic do pull the PO qty which can be used for variant pricing (so request to please update the forum with the correct table and field once you find it - in the meantime if I get opportunity to get to system I will also try and find out ). -
How to stop the prodution order creating when the product is not valued?
Hi guyes:
How to stop the prodution order creating when the product is not valued using CO01?
I hope that when i create the production order,the system will check the product is valued or not,if not
the system will show an error or warning message!
How to config for this?
Thank you!Dear Zhao Gang,
Check with this user Exits mentioned in this link,
Prevent Production Order from "Release" if there is no Cost Estimate
Re: User Exit at Production Order Release
Check and revert back.
Regards
Mangalraj.S -
Use SQL function to get the original order number using the invoice number
Hi All,
wondering is someone can help me with this challenge I am having? Often I need to return the original order numbers that created the resulting invoce. This is a relatively simple seriese of joins in a query but I am wanting to simplify it using a SQL function that can be referenced each time easily from with in the SELECT statement. the code i currently have is:
Use SQL function to get the original order number using the invoice number
CREATE FUNCTION dbo.fnOrdersThatMakeInvoice(@InvNum int)
RETURNS nvarchar(200)
AS
BEGIN
DECLARE @OrderList nvarchar(200)
SET @OrderList = ''
SELECT @OrderList = @OrderList + (cast(T6.DocNum AS nvarchar(10)) + ' ')
FROM OINV AS T1 INNER JOIN
INV1 AS T2 ON T1.DocEntry = T2.DocEntry INNER JOIN
DLN1 AS T4 ON T2.BaseEntry = T4.DocEntry AND T2.BaseLine = T4.LineNum INNER JOIN
RDR1 AS T5 ON T4.BaseEntry = T5.DocEntry AND T4.BaseLine = T5.LineNum INNER JOIN
ORDR AS T6 ON T5.DocEntry = T6.DocEntry
WHERE T1.DocNum = @InvNum
RETURN @OrderList
END
it is run by the following query:
Select T1.DocNum, dbo.fnOrdersThatMakeInvoice(T1.DocNum)
From OINV T1
Where T1.DocNum = 'your invoice number here'
The issue is that this returns the order number for all of the lines in the invoice. Only want to see the summary of the order numbers. ie if 3 orders were used to make a 20 line inovice I only want to see the 3 order numbers retuned in the field.
If this was a simple reporting SELECT query I would use SELECT DISTINCT. But I can't do that.
Any ideas?
Thanks,
MikeThanks Gordon,
I am trying to get away from the massive table access list everytime I write a query where I need to access the original order number of the invoice. However, I have managed to solve my own problem with a GROUP BY statement!
Others may be interested so, the code is this:
CREATE FUNCTION dbo.fnOrdersThatMakeInvoice(@InvNum int)
RETURNS nvarchar(200)
AS
BEGIN
DECLARE @OrderList nvarchar(200)
SET @OrderList = ''
SELECT @OrderList = @OrderList + (cast(T6.DocNum AS nvarchar(10)) + ' ')
FROM OINV AS T1 INNER JOIN
INV1 AS T2 ON T1.DocEntry = T2.DocEntry INNER JOIN
DLN1 AS T4 ON T2.BaseEntry = T4.DocEntry AND T2.BaseLine = T4.LineNum INNER JOIN
RDR1 AS T5 ON T4.BaseEntry = T5.DocEntry AND T4.BaseLine = T5.LineNum INNER JOIN
ORDR AS T6 ON T5.DocEntry = T6.DocEntry
WHERE T1.DocNum = @InvNum
GROUP BY T6.DocNum
RETURN @OrderList
END
and to call it use this:
Select T1.DocNum, dbo.fnOrdersThatMakeInvoice(T1.DocNum)
From OINV T1
Where T1.DocNum = 'your invoice number' -
A report which shows the purchase order MM and the linked vendor invoice
Hi All,
I wonder if ther's a SAP standard report which shows the purchase order MM and the linked vendor invoice (the FI document) with the Net due date.
Could anyone help me?
Thanks
G.RossiHi,
ME80FN with PO History View
ME2N with Scope of List "ALLES" -
How do change the sound level input at the premiere cs6
Hello:
I would like to know how to change the sound level input al the premiere cs6?.
Sincerely, Gabriel CondeThe input sound levels will be determined by the media files you use. The output volume can be adjusted in several ways.
https://helpx.adobe.com/x-productkb/global/offline-help.html
Maybe you are looking for
-
I own a 27" iMac that is just less than 4 years old, and where after sending it for repair with Apple in Denmark was told that it needed a new graphics card for DKK 2899 - approx. USD 490.00. I found out that the iMac is produced at a factory in Sha
-
i had to get a new iphone and want to know how to tell if my pictures from my previous phone were backed up on itunes. when i connect to itunes, does it automatically sync / backup even if i'm going from a 4 w/IOS 6 to a 5S w/IOS 7?
-
I initially created my apple account years ago. I am trying to reset my security questions because my answers are continually incorrect. I pressed the link that sends reset security questions info to my alt. address, but I have not received the email
-
Design reports that print consistently in difference PC environments
Crystal 9.0 The main issues are with 11x17 reports. In the developer PC the reports are viewed and printed properly. When encapsulated using VS 2003 and distributed to other companies, some are chopped to 8.5x11, others are resized and printed to 8.5
-
I want to overlay elapsed time for 30 hour time lapse onto 30 minute video.
Title says it all. I have 92k pictures that I've put into an ~30 minute time lapse video. The pictures came from about 30 hours of recording. I would like to add a clock to show the time on to the video. I have sequences broken up by hours of the