What does the message could not locate the dynamic link library SQlite.dll

Every time I restart my computer I get the message from AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll. What does this mean and how can I elimanate it?

Try using one of the following Apple documents to completely remove iTunes and the related components (especially the stuff mentioned in the common files folder).
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
If that doesn't work, try the suggestion in this thread -> AppleSyncNotifier.exe - Entry Point Not Found

Similar Messages

  • Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

    Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

    I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it.  I cannot fix this!  I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up.  HELP!  This is driving me crazy.  How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

  • Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

    Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
    re-install Itunes and what version??

    Refer to this thread - https://discussions.apple.com/message/15685210#15685210
    Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

  • Need a fix to error message...AppleSyncNotifier.exe - Entry Point Not Found  The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll

    need a fix to error message...AppleSyncNotifier.exe - Entry Point Not Found  The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

    Any answers how to fix it? All Im getting is error for the past 3 days!

  • What does this message mean on my PC " the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll.

    Why does this message pop up on my PC after i start up " (AppleSyncNotifier.exe-Entry Point Not Found ) the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll. ? What can I do to fix this problem ?

    Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.

  • The procedure entry point Sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.   what does this mean?????

    the procedure entry point Sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.   what does this mean?????

    Hi Vas, I'll do my best.
    I don't think the current error message you're getting is related to the previous one.
    I have researched a little bit on the error message you're getting, and it seems to be one that has been going on for a few years, and from what I can see it relates to the iPod Photo cache folder.
    It also appears that the actual phone does sync even though you still get this message.
    I suggest you have a look at these webpages for further information
    https://discussions.apple.com/thread/2441003?start=0&tstart=0
    http://support.apple.com/kb/TS1314
    Good luck and let me know how you get on

  • "itunes.exe - Entry Point Not Found" "The procedure entry point_dispatch_queue_attr_concurrent could not be located in the dynamic link library libdispatch.dll."???? What does this mean?

    I simply wanted to update my itunes and this is now the error message I get and can't access or even log into itunes or itunes store.
    "itunes.exe - Entry Point Not Found" "The procedure entry point_dispatch_queue_attr_concurrent could not be located in the dynamic link library libdispatch.dll."???? What does this mean?
    Anyone have a solution?

    This error has the same pattern as those discussed in the first and third boxes of the user tip Troubleshooting issues with iTunes for Windows updates, suggesting that you've got an outdated .dll file that needs replacing. You should find libdispatch.dll in the one of the following folders:
         C:\Program Files\Common Files\Apple\Apple Application Support
         C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    Delete it and then repair Apple Application Support from the control panel. If that doesn't work go for the full tear down and rebuild as outlined in the second box.
    tt2

  • What do I do when I try to open Fifrefox 4 & get the message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll?

    2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.

    This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.

  • I keep getting the error message apple sync notifier.exe entry point not found.  The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

    I keep getting the error message apple sync notifier.exe entry point not found.  The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll - what went wrong and how to resolve this?

    Updating iTunes 12.1 and get error message "The procedure entry point CMBlockBufferCopyDataBytes could not be located in the dynamic link library CoreMedia.dll". What went wrong and how to resolve this?

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • HT1349 When my computer comes up, I always get this error message.  AppleSyncNotifier.exe entry point not found. SqLite3_wal_CheckPoint could not be located in the dynamic link library SQLite..dll.  What should I do?

    When I start up my PC I get the following message.  Apple Sync Notifier.exe entry point not found. Sqlite3_wal_checkpoint could not be locatedin the dynamic link library SQLite3.dll.  What do I need to do to correct this?

    See Troubleshooting issues with iTunes for Windows updates.
    Try the repair tip in the third box first.
    tt2

  • Error message - "entry point not found - asl_add_log_file could not be located in the dynamic link library ASL.dll". Does anyone have a clue how this can be fixed? I am running iTunes 9.  Thank you.

    I get this message when I start up my computer and when I try to open itunes.  After a couple of clicks to cancel the message, all programmes still open.  I've run a registry checker to no avail.  I also cannot find the ASL.dll on my computer either.  Any ideas?

    Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

  • The procedure entry point_excep[_handler 4_ common could not be located in the dynamic link library msvcrt.dll what does this mean and what do I do about it

    This keeps popping up on my screen " The procedure entry point_ except_ handler 4 - common could not be located in the dynamic link library msvcrt.dll
    == This happened ==
    Every time Firefox opened
    == a couple of weeks ago

    Happened before to some other people in the forum [http://support.mozilla.com/en-US/forum/1/401434 here] and [http://support.mozilla.com/en-US/forum/1/475784 here].
    Please rename the file the file below and see if the problem persists.
    <code>
    c:\windows\system32\dwmapi.dll
    </code>

  • I am getting the following error message on reboot: The procedure entrypoint sqlite 3_wal_ checkpoint could not be located in the dynamic link library sqlite3.dll.

    What do I need to do to eliminate the following error message:
    The procedure entrypoint sqlite3_wal_checkpoint could not be located in the dynamic link library sqlite3.dll.
    I am currently running Firefox 6.0 on my laptop. Thanks.

    So for the people with similar problem as mine, please do the following. It cleared that error message right away so this must be the solution.
    1. Go to c:\program files (X86)\Common Files\Apple\Application Support
    2. Find SQlite3.dll in that folder, then right click it and choose Copy
    3. Go to c:\program files(X86)\Common Files\Apple\Mobile Device Support
    4. Paste SQlite3.dll in this folder
    5. Restart your Windows
    ps. use Program Files instead of Program Files(X86) folder if your computer does Not use 64bits. Mine does.

  • HT1926 I am getting this message when loading Itunes after updating to the latest upgrade..The procedure entry point uloc_getLocaleforLCID_4_0 could not be located in the dynamic link library icuuc40.dll (i have windows 7)

    I have windows 7 and after updating Itunes to the latest version, I get this error message...
    The procedure entry point uloc_getLocateeForLCID_4_0 could not be located in the dynamic link library icuuc40.dll.
    I have tried repairing and reinstalling even deledted Itunes and did a re-install but keep getting the same error message.
    what can I do to fix this error?

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Maybe you are looking for