What does the message "No Editor " mean ?

What does the message "No Editor" mean?

Okay - the message means that the system knows of no editor (program) to use to view these files.
Since I gather you recently upgrade to Mavericks from Snow Leopare (you might want to update your profile), I am guessing these movies are in the file format for a program that no longer runs on Mavericks (or is not installed).
It is possible that you can change the "kind" ie. the file format extension, to one that the system recognizes, and have it open these files with another program.  You will have to experiment to see what works.

Similar Messages

  • What does the message, "document flip" mean?

    ''locking - duplicate - https://support.mozilla.com/en-US/questions/852099''
    I keep getting a pop-up window titled Document Flip. It is very annoying.

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • What does the message "Another program has control of HP imaging device mean"?  I get this when I am trying to scan.

    What does the message "another program ha control of HP imaging mean when I am trying to scan something. How do i correct it?

    You may need to ask HP. I had the same issue with a networked (via ethernet) home HP multi-function. Sometimes the only way to get it to scan was to completely disconnect it from the network and connect it to only one Mac with a USB cable. Even that did not alwatys work.
    Eventually, Apple started pushing out HP printer updates via Software Update. One of those finally made that error message to go away.
    So run Software Update and see it there are new drivers that Apple made avaialble.

  • What does the message mean time capsule already in use when it refueses to backup?

    What does the message mean time capsule already in use when it refueses to backup?

    Just the network is cranky..
    Simple first step.. restart the TC.. ie unplug the power cord.. count to 10.. plug it back in.
    Second step if that fails.. restart the network.. off everything.. restart in order.. modem.. TC.. clients 2min gap.
    Finally if you are prepared to fight you can load 5.6 utility onto Mountain Lion and do a disconnect all users.. or a few other ways.. turn off file sharing and turn it back on.
    The issue being TM did not dismount the sparsebundle correctly.
    C12 http://pondini.org/TM/Troubleshooting.html
    For more info.

  • What does the message "LIBROOKSBAS. DYLIB PLUG-IN' mean because it will not allow me to open Safari

    What does the message "LIBROOKSBAS. DYLIB PLUG-IN' mean because it will not allow me to open Safari

    Welcome!
    You have installed Trusteer's Rapport software that many banks recommend, unware that it is poison to Safari. The developer keeps working on it but, so far, we don't seem to have a stable version that doesn't cause more problems than it fixes.
    Removal instructions are here:
    http://www.trusteer.com/support/uninstalling-rapport-mac-os-x

  • What does the message,"macintosh platform does not support live script" mean?

    What does the message," Macintosh platform does not support livescript" mean?

    From what I found LiveScript is the precursor of JavaScript, if this means anything in your context. Do you have JavaScript enabled? You might see this discussion: https://discussions.apple.com/message/6447836#6447836.

  • What does the message -  "i phone can not used because the apple mobile device is not started " mean

    what does the message -- "i phone can not be used because the apple mobile device is not started" mean

    Type "apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting help articles.

  • What does the flashing yellow light mean on my airport express?

    what does the flashing yellow light mean on my airport express?

    Open AirPort Utility, the application that you used to configure the AirPort Express and click Manual Setup.
    Click directly on the word "Status" (2nd line) and a window will open to tell you why the Express is complaining. What is the message?
    It might be a notification that an update is available for your Express.

  • What does the message (unable to launch app at this time try again lat ....done. Retry

    What does the message mean( unable to launch app at this time   Done.    Retry ) .

    The only other thing I can think of since this problem has to do with downloading on 3G is that the signal strength isn't good enough. Try a reset on the device, hold the sleep/wake and home buttons together until you see the Apple logo and release. Once the phone restarts see if you can get it done. If not, you might want to check with iTunes support and see if they see anything wrong with your account.
    Have you tried downloading on wifi? Does this work? Have you checked in iTunes for available downloads to try and get what you have cleared to start over?

  • On opening some pdfs in new tab, get a box labeled Adobe Acrobat with a ? in it. Right click on the link gets the pdf. What does the box and ? mean. Running W7, FF 10.0.2, Adobe Standard 9. Thanks

    On opening some pdfs in new tab, get a box labeled Adobe Acrobat with a ? in it. Go back to the original link, right click on the link gets the pdf. What does the box and ? mean and why do I get it when trying to open some pdfs? Running W7, FF 10.0.2, Adobe Standard 9. Thanks.

    Assuming that you are using IE10 / IE11 on Windows: http://support.microsoft.com/kb/2716529

  • What does the arrow looking symbol mean next to the battery top right?

    What does the arrow looking symbol mean next to the battery at the top right of my iphone mean?

    Covered in the manual:
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • What does the error code 0x80090318 mean connecting to IStore?

    What does the error code 0x80090318 mean connecting to IStore?

    I think the problem was using a WPA2 network rather than a WPA network. When I tried connecting to a WPA network, everything went fine.

  • Does the message mapping editor insure that a valid target message is co

    Hi Friends
    Does the message mapping editor insure that a valid target message is constructed?
    Regards
    Sam

    Samuel,
    Message mapping editor ,will generate the output as per your logic. Hence you need to validate and check whether the target message has been created correctly.
    If you say," I'm perfect with the logic, I created the mapping I checked the target strcuture, its perfect, always the data will be populated correctly?" If the above is your question, then the answer is YES.
    raj.

  • What does the word "static" really mean?

    Yep, that's the question. What does the word "static" really mean?
    /Martin

    hi static means that u can use it with out creating an object of this class
    i.e. Class.Staticmethod()
    e.g. Math.pow(7,2)
    non static means u hava to create an object to use it
    like ClassObject.method()
    and remember it doesn't fit only for methods it fits for all members of a class i.e. methods and variables

  • CRS 5.0.2 What Does the Message "%MIVR-MGR_MGR-1-MGR_PARTIAL_SERVICE: Manager Manager in partial service"

    What Does the Message "%MIVR-MGR_MGR-1-MGR_PARTIAL_SERVICE: Manager Manager in partial service"
    CUCM 6.1.2a
    CRS 5.0.2_SR03
    CRS is HA
    Thanks by advance for your help

    Hi.
    Manager Manager is the controller of other Managers... File Manager, Document Manager, Script Manager, etc. If you expand Manager Manager which one of the Managers do you see in Partial or Out of Service? Based on that you would troubleshoot from there. For example if Document Manager is in Partial you need to make sure all of your XML documents are properly uploaded.
    If you need TAC assistance to troubleshoot this the best thing for them is if you restart the CRS Engine amd confirm Manager Manager is still in partial service, if so provide the \program files\wfavvid\log\MIVR\ciscoMIVR.log covering the startup event.
    I hope this helps.
    Regards,
    Andy

Maybe you are looking for