What does this alarm mean ....... hwStringMatch - HP Insight Management Agents Trap Alarm: Logical Drive Status Change: Slot 1, Drive: 2 ......... Status is now Predictive Failure

Hi,
I have received this trap from the Call Manager PUB server running version 7.1.5.31900-3
hwStringMatch - cmaidad[5579]: Physical Drive Status Change: Slot 1 Port 2l Box 1 Bay 1. Status is now Predictive Failure
I have checked the drive status via CLI and all drives show OK, both physical & logical
Is there anywhere you can check what is causing this event and is it merely advising of a potential drive failure

Hi
Modern drives have embedded monitoring. Whilst the disk hasn't failed, something internally is telling the embedded monitoring that it may soon fail - it's running a little hot, having excessive write errors, latency is drifting up... something subtle is going wrong.
It could be caused by a firmware error... but I'd take it at face value.
It might have failed by the time you read this, or it might work fine for another 20 years.
Either way - when I was a server admin I would get any disk with a predictive failure swapped out immediately. No point waiting for it to fail - even on a RAID system when a disk fails although you don't lose data you have your trousers down as a coincidental second failure would ruin your day!
Regards
Aaron

Similar Messages

  • What does this message mean:  this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.

    what does this message mean:  this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.

    FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
    http://support.apple.com/kb/HT1311

  • What does this message mean?  "ITunes has fetected an iPad in recovery mode.  You must restore this iPad before it can be used with ITunes".

    What does this message mean?  "itunes has detected an iPad in recovery mode.  You must restore this iPad before it can be used with ITnes."  How do I restore when every time I connect to my computer I get this message?

    Perhaps the information in this Apple support article will help:
    http://support.apple.com/kb/TS3694#error3004
    Regards.

  • What does this message mean Charging is not supported with this device?

    What does this message mean Charging is not supported with this device?

    You've gotten 2 good answers already, but there's a key assumption in both that you got the message when connecting the iPhone to some other device. If this is the case you can get an adapter in the Apple online store that will allow charging from older devices.
    If, however, this message appears when you are not connected to anything the problem is dirt or moisture in the dock connector at the bottom of the phone. Clean it with a dry toothbrush or air blast.

  • What does this message mean? : "The file name "DSC_0088.jpg" is offline or missing." ?

    What does this message mean? : "The file name "DSC_0088.jpg" is offline or missing."   I am in the process of importing photos from iPhoto (don't really know what I'm doing....) and when I look at one of the imported photos that message pops up.  I know what "DSC_0088.jpg" is.  I don't know what it means that the file is "missing".

    CASpyr,
    Thank you so much for your reply.  I have a couple of bigger issues that I am dealing with: too many photos on my laptop: 40,000! (Of course I have to throw away many of them, but that is time consuming). I have a MacBook Pro and have primarily used IPhoto. I have recently purchased 2 external drives and have transferred my photos to those, but I need a basic education about how photos are stored, copied, etc.  I have recently been told that iPhoto only shows and deals with jpegs, not RAW.  About 1/3 of my photos are RAW, so I purchased Lightroom, so I could do more with those RAW photos.  I have been told by my local Mac store that I need to delete most of my photos from iPhoto, because it's causing problems.  I am reluctant to do so until I am sure that all of the keywords, descriptions and editing I have done to these photos is not lost when deleted from iPhoto. I just watched a tutorial about importing to Lightroom and got out of it that I needed to copy photos from iPhoto to a file on my desktop and then copy to Lightroom.  I did that, it seemed to work.  Then (because of my storage/memory issues) I deleted the photos (just a few as an experiment) from that desktop file.  I'm guessing that is why Lightroom doesn't recognize the the photos.  It seems that (learned from another tutorial) that one uses "Add" , Lightroom is only connecting to the source of the photo, not  actually copying it to the program.  Sounds like I need to use the "Move" feature instead.  My ultimate goal is to store the photos on the 2 external drives and eliminate most of them from my lapop.  So my basic questions have to do with what data (metadata??) is copied from iPhoto to an external drive (RAW???) and what isn't copied. Basic understanding issues,obviously….  I hope this isn't too much to ask.  If you can recommend a book or resource that can explain those basic issues to me I'd appreciate it.  I just got back from a trip and I can't download my new photos until I manage the rest!
    Thanks,
    Nancy

  • What does this message mean - The operation can't be completed because the item "12b" is in use.

    The operation can’t be completed because the item “12b” is in use.  What does this message mean.  It appeared as I was attempting to clear my time machine backup?

    Reboot your machine make sure Aperture doesn't start (as Lion is liable to do) and try it.

  • What does this message mean baring in mind we don't know who 'Lareib' is?: ''Lareibs phone' is now using (my number) for iMessage'

    What does this message mean baring in mind we don't know who 'Lareib' is?: ''Lareibs phone' is now using (my number) for iMessage'

    How would we users in this forum also know who Lareib is?
    It means what is stated, that person is now using your number for imessage.

  • What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired"

    What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired"  I get this when I try to repair permissions in disk utility.

    It's an innocuous error you can ignore. It was introduced with previous updates for ARD and/or Java before Lion. These are messages, not errors. They will cause no harm, and they will be repeated each time you repair permissions.

  • What does this message mean: "power pc applications are no longer supported"?

    What does this message mean: you can not start because power pc applications are no longer supported?

    Here is a post that I assembled for another who needed to continue to run his PowerPC applications in Lion/Mt. Lion:
    Unfortunately you got caught up in the minor miracle of Rosetta.  Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
    However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion).  While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
    Workarounds:
    1. If your Mac will support it, restore OS X Snow Leopard;
    2.  If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
    3.  Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
    3.  Install Snow Leopard (with Rosetta) into Parallels:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439
    NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
    NOTE 2:  Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

  • What does this error mean? There was an error in the App Store. Please try again later. (100)

    what does this error mean? There was an error in the App Store. Please try again later. (100)

    I have the same problem and thought it might be related to moving to Denmark. My app store account was set up for USA and then the error number in parentasis was (13). After changing the profile to Denmark the number changed to (100), like yours

  • While importing a CD into my iTunes library I kept getting the following error message- iTunes library cannot be saved- An unknown error occurred (-54).  What does this error mean and what can I do about it??

    While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54).  what does this error mean and what can I do about it??

    The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .

  • What does this error2 mean and how do I fix it?

    What does this error mean and how do I fix it?  I am trying to reinstall CS4 on my Windows 8.1 machine. 
    Adobe Flash Player 10 ActiveX
    Error:
    Error 2.
    Here is the initial error: http://s29.postimg.org/wqy2ju8iv/Untitled.png
    Here is a screenshot when I click the "More Information" button: http://s27.postimg.org/bugb7rx7n/Untitled2.png
    And here is the screenshot when I click the "Get Support" button: http://s4.postimg.org/c2ynvhmvx/Untitled3.png
    I'm stumped.

    Hi there I've just installed CS4 Pro on Windows 7 64bit and got exactly the same result as you. Did you manage to find anything out, because the thing that bothered me was the limited functionality (what ever that is). Is it just a case of Windows 7 having a newer version of ActiveX already installed?

  • I have just tried to sync my iphone. Error message saying it cannot be synced has popped up quoting error code (-50). I have just removed old iphone backups from itunes but was very careful to not delete the current one. What does this code mean?

    Hi there,
    I have just tried to sync my iphone.
    Worryingly an error message saying it cannot be synced has popped up quoting error code (-50)
    I have just removed old iphone backups from itunes but was very careful to not delete the current one
    What does this code mean?

    http://support.apple.com/kb/TS1583

  • What does this error means? "Line 20 column 57: character content of element "language" invalid; must be a string with length equal to 3 (actual length was 7) at XPath /package/book/metadata/languages/language" "

    Hi there.
    I am about to publish a book in English and Chinese.
    What does this error means?
    Line 20 column 57: character content of element "language" invalid; must be a string with length equal to 3 (actual length was 7) at XPath /package/book/metadata/languages/language"
    And where is line 20, column 57?
    Thanks folks!

    Go into iTunes Producer and select from the dropdown, don't type.
    cs
    iBooks Author Guide

  • HT201514 What does this message mean and how do I correct it?

    What does this message mean?
    "The backup disk image “/Volumes/Nicholas' Time C-1/nicholas--MacBook Pro.sparsebundle” is already in use"
    How do i correct it?

    What does this message mean?
    It means that there are bugs in Mountain Lion.
    How do i correct it?
    Make sure that no other Macs are backing up at the current time
    Pull the power cord from the back of the Time Capsule
    Wait 10 seconds
    Plug the power cord back into the back of the Time Capsule
    This simple reset will fix this issue 98% of the time. If you happen to be in the unlucky 2% category, post back and we'll provide more information.

Maybe you are looking for