What does this diagnostic code mean: 4M0T/4/40000003:HDD-1237
when coming out of sleep i would get a message saying a disk was not usable by my machine. I ran the apple hardware test on the app. disk that came with my computer and got a code number back. I wonder if there is a list of these codes so I will know what is wrong before i spend money.
code was 4MOT/4/40000003:HDD-1237
Sounds like your Mac is not happy with the disk drive.
Do you have a current backup?
You might want to take it to Apple and ask them to check it out for you.
Allan
Similar Messages
-
On updating Creative Cloud, I get an error code 50 - what does this error code mean?
Downloading and installing an upgrade to Creative Cloud, I keep getting an error code 50. I have look for a list of error codes with no luck. Can anyone tell me what this error code means and what the fix is? Thanks in advance.
Error 50 https://forums.adobe.com/thread/1432237 may help
-
What does this error code mean? Help!!! First post.
New guy here. My wifes computer starting making strange repetitive hard drive noises several days ago. A few frozen screens and now will not boot. The computer is a Powerbook G4 15in. I ran the hardware test several times and got no error code. I even ran the extended test twice with no luck. Finally I got an error code of 2 STF/4/3:ATA-100ata-6-Master. I ran again and got 2STF/3/3:ATA-100ata-6-Master. Last time got 2STF/1/4:ATA-100ata-6-Master. What does it all mean? Thank you for any help. My wife is a teacher and needs her computer every day.
Hi, Dan - Welcome to Apple Discussions.
A 2/STF... error indicates the imminent failure of the hard drive. If possible, you should connect your wife's computer to another FireWire equipped Mac and attempt to boot it into target disk mode in order to retrieve what personal data you can.
If the machine is still under warranty, contact AppleCare (800.275.2273), inform them of the error messages you're getting, and arrange for them to replace the drive.
Good luck!
Tuttle
1529/8237 -
What does this error code mean?
I keep trying to update my regular adobe and I keep getting this error code 1310 it states that I need to verify that I have authority for file C:\config.Msi\PFCICE.tmp file. I assume this may have something to do with my virus suite, but really have no idea on how to fix this. Anyone got any help for me it is driving me crazy!
Please refer : http://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html
-
Powermac G5 1.8ghz June 2004 - strange issues, what does this ASD code mean
I have a powermac g5 with an issue and I would appreciate any help or input. the machine is air cooled dual 1.8ghz processors. After booting to the 10.4 os, the machine would switch to full fan power after 1-2 mins, eventually leading to a lockup shortly there after. I was wanting to upgrade the hard drive anyhow, so I went ahead put in a new drive a fresh load of 10.4. The same issue occurred, within 1-2 mins of loading the desktop fans would switch to full blast followed by a lockup.
AHT passes all extended test.
ASD 2.5.8 reports the following error:
error - PHY data mismatch #define kFWPHYAddressCompareErr - 29055 // -29004
I was thinking if anything, the temp sensors would fail, but the error appears to have something to do with firewire, which seems to be working fine. Does anyone have any insight to this error?
After ASD I reset the pram on the machine by pressing the button on the logic board. The machine booted normally and seemed to be fixed. I was able to install updates including 10.4.11 and use the machine for an hour or so. I then walked away from the machine and it eventually went to sleep mode. When I came back the machine would not wake from sleep. When moving the keyboard/mouse I heard the system kick on and try to wake up, but never resumed video output. Eventually the fans went to full power and stayed there and I ended up powering off the machine.
Also, intermittently, the machine hangs on a grey apple screen with no spinning gear when powered on. I have not seen this since the pram reset, but I wanted to through that out there as well.
Any idea on what could be causing the issues?Any process that will cause the system to stall/be unable to proceed, would most likely be accompanied by a kick in of the fans as an overheat defense mechanism.
If the system is looking for an address that isn't as expected, it would go on a search loop, which would increase activity, thus the fans.
It is probable that it is related.
It is possible that you may be able to garner further information about what is involved by looking at Console/logs for the processes that are involved at the time just prior to the events.
Additionally, it is proper to run diagnostics several times to confirm the error.
It would be prudent to confirm the error.
For additional feedback on the system components, and to provide validation or refutation of possible memory related issues, use Memtest or Rember to test the RAM.
Apple tests are all or nothing with regard to memory, while these two utilities can help identify latent or intermittent issues.
One other thought is that the issue may be due to firmware corruption, in which case a NVRAM reset may be more valuable than a PRAM reset. -
mac airport time machine i tried to open up error code 6584 would not open please help !
First, I strongly suggest that you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
2. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
3. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups will be lost, so don't do this until you've backed up to another device. After erasing, select the TC again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible. -
Anonymous UUID: E18D4DDF-5B1B-E177-D59B-E25D0E020829
Sun Nov 3 14:48:45 2013
panic(cpu 1 caller 0xffffff8009c54be4): "a freed zone element has been modified: expected 0xffffff80239f1490 but found 0xffffff80339f1490, bits changed 0x10000000, at offset 0 of 16 in zone: kalloc.16"@/SourceCache/xnu/xnu-2422.1.72/osfmk/kern/zalloc.c:461
Backtrace (CPU 1), Frame : Return Address
0xffffff8082ed3560 : 0xffffff8009c22f69
0xffffff8082ed35e0 : 0xffffff8009c54be4
0xffffff8082ed3620 : 0xffffff8009c5267d
0xffffff8082ed3680 : 0xffffff8009c51d09
0xffffff8082ed3780 : 0xffffff8009c2aa2f
0xffffff8082ed37b0 : 0xffffff8009cd52da
0xffffff8082ed37e0 : 0xffffff7f8bf6378c
0xffffff8082ed38c0 : 0xffffff7f8bf67402
0xffffff8082ed3bd0 : 0xffffff8009dfc9db
0xffffff8082ed3c30 : 0xffffff8009dd544b
0xffffff8082ed3cb0 : 0xffffff8009dd4da4
0xffffff8082ed3d70 : 0xffffff8009dc2ebf
0xffffff8082ed3f50 : 0xffffff800a03de23
0xffffff8082ed3fb0 : 0xffffff8009cf3e06
Kernel Extensions in backtrace:
com.apple.filesystems.msdosfs(1.9)[EAB7553F-8FD7-364E-BD4C-756F4FDE7600]@0xffff ff7f8bf62000->0xffffff7f8bf6ffff
BSD process name corresponding to current thread: mdworker
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x0000000009a00000
Kernel text base: 0xffffff8009c00000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 383590844327
last loaded kext at 268368078419: com.apple.driver.AppleUSBCDC 4.2.1b2 (addr 0xffffff7f8bf70000, size 20480)
last unloaded kext at 382156000074: com.apple.driver.AppleUSBCDC 4.2.1b2 (addr 0xffffff7f8bf70000, size 16384)
loaded kexts:
com.apple.filesystems.msdosfs 1.9
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.11
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDA 2.5.2fc2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleLPC 1.7.0
com.apple.GeForceTesla 8.1.8
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMikeyDriver 2.5.2fc2
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBOHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.5.2fc2
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.AppleHDAController 2.5.2fc2
com.apple.iokit.IOHDAFamily 2.5.2fc2
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus:At that point, I had taken one of the DIMs out to see if the RAM was the issue. I took it to the Apple Store and they said that the hard drive might be bad, so they wiped everything on the hard drive. After that, I was still experiencing the kernel panics. So another guy looked at it and said that it might be bad RAM. So I called the company and got them to send me more RAM and after inserting the new RAM, I still get kernel panics. I've been saving all the panic reports in a folder on my flash drive. Today I got a total of four. And then I got four the day before that. Mind you, this didn't start happening until I upgraded my system to Mavericks.
I really wish there was a way I could post them all so someone could look at them, cause to be honest, none of the code in it makes any sense to me. -
Replaced my failed HD and now the CPU AND ODD fans are running fast. imac 21.5 mid2010
There is a sensor cable on some iMac models that must be attached to the replacement HDD for the fans to operate normally. I do not recall if the particular models include your mid-2010 iMac but the symptom you describe would be consistent with this requirement.
If you did not buy it from OWC / MacSales or other well-known Apple supporter, it is unlikely to have the required hardware.
Check with OWC to determine the correct replacement you require. -
What does the following code mean???
what does the following code mean ??
fpm.raiseReviewAndSaveEvent(IFPM.EVENT_REVIEW, IFPM.EVENT_SAVE, vcFormEditButtons);
thanks in advance.
can you please tell me best site to learn WD4J coding.
site having lot of WD4J code examplesHi,
While Creating an FPM View we can use this line code.For more details of above line
[code|http://help.sap.com/erp2005_ehp_04/helpdata/en/fc/ffd8464eb041848ca66749165d8f33/content.htm]
Please look at these documents for WDJ Example Application. Please go through this documenst.
[WDJ Application|Web Dynpro Java Tutorials and Samples NW 2004 ] and [Samples for Web Dynpro Java|http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/00b64d9f-fea2-2910-c988-ee2544047f8c] and [Web Dynpro for Java Demo Kit|http://wiki.sdn.sap.com/wiki/display/WDJava/WebDynproforJavaDemo+Kit]
Hope this is help full for u
Regards
Vijay -
Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
Product and Software: This article applies to AP-105.
The root cause of this error is that the AP cannot perform a code upgrade.
Scenario 1
Check the ArubaOS code.
The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
Scenario 2
If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
Scenario 3
The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
apboot> setenv ipaddr <ip address>
apboot> setenv netmask <netmask>
apboot> setenv gatewayip <ip address of the gateway>
apboot> setenv master <ip address of the master>
apboot> setenv serverip <ip address of the TFTP server>
apboot> setenv bootcmd tftp
apboot> save
apboot> boot
Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
Built: 2011-01-07 at 13:42:04Model: AP-10x
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0xffffffff
eth0 up: 1 Gb/s full duplex
DHCP broadcast 1
DHCP IP address: 192.168.x.xx
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.x.xx
DHCP DNS server: 192.168.x.xx
DHCP DNS domain: xx
ADP multicast 1
ADP broadcast 1
ADP multicast 2
checksum bad
ADP broadcast 2
checksum bad
ADP multicast 3
checksum bad
checksum bad
checksum badRetry count exceeded
DNS request 1 for aruba-master to 192.168.x.xx
checksum bad
checksum bad
checksum bad
T Using eth0 device
TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: checksum bad
T T checksum bad
T checksum bad
checksum bad
checksum bad
T checksum bad
checksum bad
T T checksum bad
T checksum bad
checksum bad
T T T
Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum badARP Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplexchecksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad ThanKs :)
-
What does this message icon mean on a blackberry​?
What does this message icon mean on a blackberry? so when i send a text message it normally place a check mark with a small D above it. But i just got one with just a check mark, with no D above it. and i was wondering what it meant? oh and i have the blackberry tour, but it may be the same on all blackberry phones.
check means sent over network
D means delivered.
R means read.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
What does this Bridge message mean?
I have a new Mac (and Photoshop Elements 11) and when I open Bridge I get this message:
OLSException in OLS Adapter Startup
/OLS/development/main/bridge/3.2.0/build/mac/../../sdk/src/COLS.cpp#19 : 16
Should I be worried?
(I've tried using PSE Organizer and I hate it. I'd rather stick with Bridge unless I'm headed for trouble.)
What does this Bridge message mean?Bridge came with an earlier version of PSE, PSE6 I think. The Organizer comes with PSE 9 and PSE11. Like some other PSE users, I much prefer Bridge to the Organizer. I had no trouble using Bridge with PSE9 and an older Mac. But with PSE11 and my new Mac, I started getting this message. I wonder if anyone knows what this message means, if it portends trouble for me, if there is anything I should do to correct it?
I posted this question on the Elements Forum and was told that it should be addressed on the Bridge Forum. -
When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?
It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder. You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again. This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do. The article on how to do this is here. (http://www.apple.com/macosx/recovery/) I have had to do this before and it works like a charm. It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.
-
What does this error message mean? disc recording not found
What does this error message mean? disc recording not found
Often it suggests issues with device filters in your registry. But it's probably best to check the situation more closely.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. -
TS1846 What does this error message mean?
What does this error message mean? I am trying to burn a project to DVD...
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.The project is 1:22:30 - 1080P HD (4.9GB)...I am using the share drop down and hitting DVD...I am using a DVD+R Dual Layer 8.5GB...It processes for about an hour and a half the status bar gets almost done and then the error message comes up...thanks for any help you can give me
Maybe you are looking for
-
HI, I am creating a new report template. On save I get this error: Error occurred while saving the document template; save again. Although I save again, it does not save the layout. At this stage I don't check the symbols as I have not yet created a
-
I have Firefox 4. What are the disadvantages/advantages of downloading Firefox 5?
Will my current Firefox 4 program configure the new downloaded Firefox 5 as an update so I won't lose my bookmarks? I use Windows Vista 7
-
How To Restart After Reporting a Failure?
In my packages a failing step links to a step which sends an e-mail reporting the reason for the failure using odiRef.getPrevStepLog("MESSAGE"). The e-mail step then must itself fail to stop the package from continuing. This all works well, but how c
-
RSBDCSUB not scheduling background job in PRD system
hi all, i have created one background program to re-run all error session from sm35 using program RSBDCSUB.. tables: APQI. data: ls_apqi type apqi, it_apqi type standard table of apqi . select * from apqi into table it_apqi where progid eq 'SAP
-
What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?