What does this do, and how do you use it?

Thanks.

It's a sports-related title. Double click it and it will be edited as a connected clip above your primary storyline.
Select it and in the Inspector click on the Video tab. There are two drop zones. Click on one of them and select an image from your event. Repeat for the other. Hit Apply Clip.
Russ

Similar Messages

  • TS3212 What does this mean, and how do you fix it? "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."

    What does this mean, and how do you fix it?
    "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vender."
    Trying to install iTunes 10.7, first attempt; downloaded and ran with everything closed, seccond atttempt; just click on run, third attempt; ran upgrade with iTunes open. All of the results were the same.
    Is there something wrong with the iTunes 10.7 Windows installer package?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • I have downloaded music to my phone through my Apple ID and it has this message that reads you can download purchases on this device with one Apple ID account every ninety days, what does this mean and how do I fix it?

    I have downloaded music to my phone through my Apple ID and it has this message that reads you can download purchases on this device with one Apple ID account every ninety days, what does this mean and how do I fix it?

    Well, it doesn't mean that at all. You can download music purchased with an Apple ID to up to 10 devices. There is no 90 day wait. The wait is if you change the Apple ID.

  • What does this mean and how do i fix it:  "service 'apple mobile device' failed to start. verify that you have sufficient privileges to start system."

    What does this mean and how do i fix this so my ipod works again on my computer and itunes:  "Service 'apple mobile device' failed to start. Verify that you have sufficient privileges to start system services." I tried "retry", i tried "abort" and started over. I keep getting stuck in the same place.

    Hello DEstadt,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • I am trying to update itunes to 11.1.1.11 and i keep getting 'erreo writing to file : C\ : Config.Ms\301ded48.rfb.Verify that you have access to that directory'. What does this mean and how can i fix it?

    I am trying to update itunes to 11.1.1.11 and keep getting message at the end ' error writing to file :c:\Config.Msi\301ded48.rbf.Verify that you have access to that directory'. What does this mean and how do I fix it?

    I had this exact same problem just now, trying to upgrade to 10.7.
    I even got that error msg when trying to UNINSTALL iTunes!
    After hours of frustration trying everyone's different suggestions, I downloaded Revo Uninstaller http://www.cnet.com.au/apps/revo-uninstaller-10610875/ which solved the problem.
    Use it to help uninstall iTunes and related software components in the following order and then restart your computer:
    1. iTunes
    2. QuickTime
    3. Apple Software Update
    4. Apple Mobile Device Support
    5. Bonjour
    6. Apple Application Support (iTunes 9 or later)
    Then you can install iTunes from scratch.
    Good luck

  • HT204406 I downloaded a song that is not playing.  When i click to report a problem it gives me an error that says "To many HTTP redirects".  What does this mean and how do I fix it?  Thank you!

    I downloaded a song that is not playing.  When i click to report a problem it gives me an error that says "To many HTTP redirects".  What does this mean and how do I fix it?  Thank you!

    The following support articles should help:
    * https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component
    * https://support.mozilla.com/kb/AUS+Update+XML+File+Malformed+200

  • My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it.

    My iPod doesn't sync it keeps coming up with the message "The iPod 'iPod Nano' cannot be synced. An unknown error occurred (13019)." What does this mean and how can I fix it?

    I am getting the same error message. Have you figured it out?

  • HT204053 I have downloaded icloud to my pc, however when i go to sign in to Apple through icloud, i get an error message saying my apple ID is valid but is not an icloud account. What does this mean and how can i update my account so i can access icloud?!

    I have downloaded icloud to my pc, however when i go to sign in to Apple through icloud, i get an error message saying my apple ID is valid but is not an icloud account. What does this mean and how can i update my account so i can access icloud?!

    To use iCloud, you must first set it up with your Apple ID on a device with iOS 5 or a Mac with OS X Lion.

  • Images have ? symbol on the top right corner of the thumbnail  what does this mean and how do I remove it?

    Q - My images have a
    ? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
    A - The
    ? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
    Click the
    ? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
    As you'll quickly realise, clicking the
    ? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
    Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
    On the Mac you should
    Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
    Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
    Choose button and allow Lightroom to do its stuff.
    The method described above also applies to the PC version although the dialog is called
    Browse for Folder and the
    Choose button is replaced by
    OK.
    You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
    A tutorial demonstrating above can be found
    Here

    Q - My images have a
    ? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
    A - The
    ? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
    Click the
    ? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
    As you'll quickly realise, clicking the
    ? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
    Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
    On the Mac you should
    Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
    Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
    Choose button and allow Lightroom to do its stuff.
    The method described above also applies to the PC version although the dialog is called
    Browse for Folder and the
    Choose button is replaced by
    OK.
    You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
    A tutorial demonstrating above can be found
    Here

  • I cant download itunes on my computer because it says " service 'apple mobile device' failed to start. verify that you have sufficient privileges to start system services. what does this mean? how do you verify this?

    I cant download itunes on my computer because it says " service 'apple mobile device' failed to start. verify that you have sufficient privileges to start system services. what does this mean? how do you verify this?

    I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
    Windows could not start the Apple Mobil Device Service on local computer.
    Error 1053  The service did not respond to the start or control request in a timely fashion.
    I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
    Can anyone please help?

  • I can't log in to my computer- when it turns on it has a white/gray screen with a flashing folder with a question mark in it.  What does this mean and how can I get it to stop to log in?

    Hi
    I dropped my macbook yesterday and it turned itself off. When I tried to turn it back on all I got was a white/gray screen with a flash folder with a ? in the middle of it?  What does this mean and how do I get it to stop so I can log onto my laptop?

    Deev
    Normally the question mark on the gray screen means it can't find the operating system. Have you tried booting up from the installation DVD? Do that, and when you come to the screen where it wants to begin a system installation you'll notice in the menubar where it say's utilites. Click on that and choose disk utility. from there choose your disk and try to verify and repair the disk. If you can you may want to also try and new install of the system. I don't know how much critical data you have, but reinstalling is an option. did you purcahse you from an Apple store? If you did you may want them to look at it. Hope this helps.
    Regards,
    Joseph

  • Trying to update my iPhoto to 9.5.1 and I get "Update Unavailable with This Apple ID" what does this mean and how do I fix it?

    My iPhoto currently has a circle with an 'x' through it and I can not open it or sync my photos.
    Trying to Update my iPhoto to 9.5.1 and it says "Update Unavailable with This Apple ID" because "This update is not avaialble for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
    What does this mean and how do I fix it?
    I haven't changed my Apple ID or if I bought teh original update under my parents Apple ID, how do i fix it?
    Thanks!

    What version of the OS do you have?
    Is there an iPhoto application in teh applications folder?
    LN

  • I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

    I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

    Since pse 9 can only use up to camera raw 6.5 and the d600 needs at least 7.3 and the d800 needs at least 6.7, you can use the
    8.6 adobe dng converter to convert those files to dng copies, which then pse 9 should open.
    8.6 dng converter
    windows
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
    mac
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
    Note:
    If you have windows xp or vista or mac os x 10.6, then you'll need to use the 8.3 dng converter instead
    windows
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.3
    mac
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.3
    how to use the dng converter
    Camera Raw: How to use Adobe DNG Converter - YouTube
    more info on supported cameras and camera raw plugins required
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

  • I keep getting message apple I'd could notbecreated  because of a server error when setting up iPad mini. What does this mean and how do I fix it?

    I keep greeting this message trying to set up iPad mini
    Apple ID could not be created because of a server error on screen after term and conditions are accepted. What does this mean and how do I fix fix it? Has anyone else had this problem?

    Antonio,
    Show ... it worked ... you are the man! This hint of clicking the right mouse button on the prompt and run as Administrator was perfect.
    Thank you very much

  • I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported.  What does this mean, and how do I get back all my photos and fix this? thanks.

    I tried to save a video to IPhoto, and then when I tried to open IPhoto it told me I can't open the application because classic environment is no longer supported.  What does this mean, and how do I get back all my photos and fix this? thanks.

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know some details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    what fixes have you tried?
    where is you library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    OT

Maybe you are looking for

  • AP serial number report

    I am looking for a way to get a report from our wireless controllers ( 5508 and 2504 ) of all connected waps and thier respective serial numbers. This I don't think should be a difficult task but cannot find anywhere how to do this. any help would be

  • Getting error while taking preview of Web Dynpro iView

    Hi, I am getting this error while taking a preview of Web Dynpro iView : 500   Internal Server Error       SAP J2EE Engine/6.40 Application error occurred during request processing. Details:   com.sap.tc.webdynpro.services.exceptions.WDRuntimeExcepti

  • Preventing bi-lingual characters

    we are using oracle10g version. Currently my character set is WE8MSWIN1252 At present, somehow, we have non-english characters(for example spanish) in the database. We wanted to stop entering these kind of characters.. Can we prevent this by changing

  • Is it possible to edit Simple Type enum imported with a model?

    I have a Simple Type enum which has been created from a model. Is it possible for me to edit the list in Web Dynpro as the 'Add' / 'Edit' button are greyed out?

  • HT204053 Merge Apple Id's

    I have to seperate Apple Id's. One that I use for apple purchases and the other I use for Icloud. How can I merge these into one?