What does this error mean? Error: Access violation at address 0053DD46

I am trying to run diff reports using batch scripts, and its very puzzling that some of the diff report scripts within the batch script are running and some are not, there is no consistency to what is getting errored out.
I then tried running them manually in foreground on the client and I get the same issue. Has anyone encountered this issue? What do I make of it?,
4/24/2013 1:29:30 PM - *** MDMConnect starting ***
4/24/2013 1:29:30 PM - Logged in successfully.
4/24/2013 1:29:30 PM - Started export job for PLN_FLD_ACCT_DIFF
4/24/2013 1:29:34 PM - ERemotableException with message: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Access violation at address 0053DD46 in module 'mdm_ntier_engine.exe'. Read of address 00000024" while running Export
4/24/2013 1:29:34 PM - => ERROR: Data Relationship Management Server returned error: "Server was unable to process request. ---> Error during Export. Export was unable to run. Error: Access violation at address 0053DD46 in module 'mdm_ntier_engine.exe'. Read of address 00000024."
4/24/2013 1:29:34 PM - *** MDMConnect stopping ***
Thank you
Tanuja Donavalli

This is issue is coherent in DRM version 11.1.1.2
Whenever a property is deleted, the references to that property would still exists/stored in tables. The next version of DRM is made to address this issue, where in it takes care of removing all references whenever we delete the property.
Cause: Properties was deleted from DRM client but the value was still stored in the compare table for Difference export and causing export to fail.
Solution: Need to recreate the deleted properties and remove the properties in the exports and delete the properties.
Going Forward: Instead of deleting the properties we need to remove the property from the export and hide the property.
Hope this helps.

Similar Messages

I have just tried to sync my iphone. Error message saying it cannot be synced has popped up quoting error code (-50). I have just removed old iphone backups from itunes but was very careful to not delete the current one. What does this code mean?

Hi there,
I have just tried to sync my iphone.
Worryingly an error message saying it cannot be synced has popped up quoting error code (-50)
I have just removed old iphone backups from itunes but was very careful to not delete the current one
What does this code mean?

http://support.apple.com/kb/TS1583

What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired"

What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired" I get this when I try to repair permissions in disk utility.

It's an innocuous error you can ignore. It was introduced with previous updates for ARD and/or Java before Lion. These are messages, not errors. They will cause no harm, and they will be repeated each time you repair permissions.

What does this message mean: this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.

what does this message mean: this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.

FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
http://support.apple.com/kb/HT1311

What does this message mean? "ITunes has fetected an iPad in recovery mode. You must restore this iPad before it can be used with ITunes".

What does this message mean? "itunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with ITnes." How do I restore when every time I connect to my computer I get this message?

Perhaps the information in this Apple support article will help:
http://support.apple.com/kb/TS3694#error3004
Regards.

What does this message mean Charging is not supported with this device?

What does this message mean Charging is not supported with this device?

You've gotten 2 good answers already, but there's a key assumption in both that you got the message when connecting the iPhone to some other device. If this is the case you can get an adapter in the Apple online store that will allow charging from older devices.
If, however, this message appears when you are not connected to anything the problem is dirt or moisture in the dock connector at the bottom of the phone. Clean it with a dry toothbrush or air blast.

What does this message mean? : "The file name "DSC_0088.jpg" is offline or missing." ?

What does this message mean? : "The file name "DSC_0088.jpg" is offline or missing." I am in the process of importing photos from iPhoto (don't really know what I'm doing....) and when I look at one of the imported photos that message pops up. I know what "DSC_0088.jpg" is. I don't know what it means that the file is "missing".

CASpyr,
Thank you so much for your reply. I have a couple of bigger issues that I am dealing with: too many photos on my laptop: 40,000! (Of course I have to throw away many of them, but that is time consuming). I have a MacBook Pro and have primarily used IPhoto. I have recently purchased 2 external drives and have transferred my photos to those, but I need a basic education about how photos are stored, copied, etc. I have recently been told that iPhoto only shows and deals with jpegs, not RAW. About 1/3 of my photos are RAW, so I purchased Lightroom, so I could do more with those RAW photos. I have been told by my local Mac store that I need to delete most of my photos from iPhoto, because it's causing problems. I am reluctant to do so until I am sure that all of the keywords, descriptions and editing I have done to these photos is not lost when deleted from iPhoto. I just watched a tutorial about importing to Lightroom and got out of it that I needed to copy photos from iPhoto to a file on my desktop and then copy to Lightroom. I did that, it seemed to work. Then (because of my storage/memory issues) I deleted the photos (just a few as an experiment) from that desktop file. I'm guessing that is why Lightroom doesn't recognize the the photos. It seems that (learned from another tutorial) that one uses "Add" , Lightroom is only connecting to the source of the photo, not actually copying it to the program. Sounds like I need to use the "Move" feature instead. My ultimate goal is to store the photos on the 2 external drives and eliminate most of them from my lapop. So my basic questions have to do with what data (metadata??) is copied from iPhoto to an external drive (RAW???) and what isn't copied. Basic understanding issues,obviously…. I hope this isn't too much to ask. If you can recommend a book or resource that can explain those basic issues to me I'd appreciate it. I just got back from a trip and I can't download my new photos until I manage the rest!
Thanks,
Nancy

What does this message mean - The operation can't be completed because the item "12b" is in use.

The operation can’t be completed because the item “12b” is in use. What does this message mean. It appeared as I was attempting to clear my time machine backup?

Reboot your machine make sure Aperture doesn't start (as Lion is liable to do) and try it.

What does this message mean baring in mind we don't know who 'Lareib' is?: ''Lareibs phone' is now using (my number) for iMessage'

What does this message mean baring in mind we don't know who 'Lareib' is?: ''Lareibs phone' is now using (my number) for iMessage'

How would we users in this forum also know who Lareib is?
It means what is stated, that person is now using your number for imessage.

What does this message mean: "power pc applications are no longer supported"?

What does this message mean: you can not start because power pc applications are no longer supported?

Here is a post that I assembled for another who needed to continue to run his PowerPC applications in Lion/Mt. Lion:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

HT201514 What does this message mean and how do I correct it?

What does this message mean?
"The backup disk image “/Volumes/Nicholas' Time C-1/nicholas--MacBook Pro.sparsebundle” is already in use"
How do i correct it?

What does this message mean?
It means that there are bugs in Mountain Lion.
How do i correct it?
Make sure that no other Macs are backing up at the current time
Pull the power cord from the back of the Time Capsule
Wait 10 seconds
Plug the power cord back into the back of the Time Capsule
This simple reset will fix this issue 98% of the time. If you happen to be in the unlucky 2% category, post back and we'll provide more information.

So i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?

so i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?

It means you should take it to the Genius Bar. You will no doubt need to buy an out of warranty replacement.

What does this error2 mean and how do I fix it?

What does this error mean and how do I fix it? I am trying to reinstall CS4 on my Windows 8.1 machine.
Adobe Flash Player 10 ActiveX
Error:
Error 2.
Here is the initial error: http://s29.postimg.org/wqy2ju8iv/Untitled.png
Here is a screenshot when I click the "More Information" button: http://s27.postimg.org/bugb7rx7n/Untitled2.png
And here is the screenshot when I click the "Get Support" button: http://s4.postimg.org/c2ynvhmvx/Untitled3.png
I'm stumped.

Hi there I've just installed CS4 Pro on Windows 7 64bit and got exactly the same result as you. Did you manage to find anything out, because the thing that bothered me was the limited functionality (what ever that is). Is it just a case of Windows 7 having a newer version of ActiveX already installed?

What does this message mean when i dial

What does this verizon message mean?
'your call cannot be completed as dialed'
i got a number on my caller id from my ex's neighborhood
609-424-xxxx
its not his (old, home) number, but i am concerned that he got a new number or maybe called from a pay phone--
he has a history of psychological abuse
i tried calling the number back from a pay phone from the next county to see if i could find out thatit wasn't him to put my mind at ease..
but i got the above message
i dialed the number that was on my caller ID
would this message come up if it were a payphone that does not take incoming calls?
why else would i get the message.
thats the number that came into my caller id, but i am told it can't be completed as dialed..
i was calling from the 732 area code and did use the full number with the area code
i tried googling the number and doing a reverse look up
we live far apart--i don't know anyone else in his town--its too much of a coincidence to just be a wrong number
there is not enough to file a police report yet

This seems to suggest that it could be filenames… (see the final posts).
https://discussions.apple.com/message/7818914?messageID=7818914#7818914?messageI D=7818914
Replace dashes, underscores, hyphens & any other funky looking characters. Very long filenames of folder paths may cause trouble too.

What does this actually mean and how do I fix it: Alert: Error Count Monitor Resolution state Object Hyper-V Virtual Storage Device Has a value

We are getting this alert on a fair few of our VMs with VHDXs and Dynamic VHDs. Everything seems OK but I am not sure what this actually means and what I need to do to resolve the issue. How do I reset the error count if that is what is required? Thanks
in advance.
Alert: Error Count Monitor Resolution state: New
Error Count Monitor Source: MyVm01 Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE Last modified by: System Last modified time: 2/9/2013 2:08:48 PM Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual
Sat 09/02
To:Administrator
09 February 2013 14:09
Alert: Error Count Monitor
Source: MyVm01
Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE
Last modified by: System
Last modified time: 2/9/2013 2:08:48 PM
Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual hard disks-MyVm01-DATA02.vhdx
            Object Hyper-V Virtual Storage Device
            Counter Error Count
            Has a value 9
            At time 2013-02-09T14:08:48.0000000+00:00
Darren

But I am getting this alert from SCOM and SCOM has no information about the alert for me to find out what to do - thought that was the point of SCOM to let you know of problems and how to resolve them. :)
The alert is coming from the Error Count Monitor that is part of the Hyper-V Management Pack Extensions (v 4.0.0.0)
I have tried looking in the Event Logs on the Host and there doesn't seem to be any storage related errors there. I am trying to establish if this is a false positive, why it is happening and if it is safe to override and ignore.
There is nothing on the Product Knowledge tab and nothing on the Alert Context other than what I have already mentioned (see below).
Thanks for responding.
Time Sampled:
09/02/2013 14:08:48
Object Name:
Hyper-V Virtual Storage Device
Counter Name:
Error Count
Instance Name:
c:-clusterstorage-volume1-myvm-virtual
hard disks-MyVM-DATA02.vhdx
Value:
9
Darren

What does this error mean? Error: Access violation at address 0053DD46

Similar Messages

Maybe you are looking for