What does this error mean when emails are bouncing back to sender?

host
    mx.dndgraphiks.com.au.cust.b.hostedemail.com[64.98.36.4] refused to talk to
    me: 421 4.7.1 Service unavailable; Client host [67.18.137.88] blocked using
    urbl.hostedemail.com=127.0.0.101; Too many user generated complaints
    http://fbl.hostedemail.com”
Cheers

Thank you for posting.
Please refer to the following link : http://mxtoolbox.com/SuperTool.aspx?action=mx%3a67.18.137.88#
The mentioned IP (67.18.137.88) is associated with gateway16.websitewelcome.com. This has been blacklisted by several RBL. This is the reason you are getting that bounced message.
Hope this helps.
Cheers,
Aishvarya Raj Rastogi

Similar Messages

What does this error message when I try to do updates mean? And how can I fix it? Thanks. The operation couldn't be completed. (NSURLErrorDomain error -1012.)

What does this error message when I try to do updates mean? And how can I fix it? Thanks. (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
James
maverick 10.9.1

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Error -54 when synching iPad with iTunes.... what does this error mean?

error -54 when synching iPad with iTunes on laptop.... what does this error mean?

Hey MacFromManila,
It's a different method of backing up your iPhone 4s. This article covers the differences between the two and may actually be able to help you choose between them:
Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
http://support.apple.com/kb/HT5262
Cheers,
- Ari

What does this error means "Could not create Entity EJB"

This error occurs when i tried to run my entitybean example, so may i know what does this error means? How can i resolve it?
I am connecting to an Oracle8 DB, but it seems tat i have problem connecting to it and retrieving record from the database. Can anyone help me how to establish a connection to my Oracle DB??
Need help urgently. thanx.!

have you tried simple jdbc connection?
Driver drv = Class.forName("oracle.jdbc.driver.OracleDriver");
Connection conn = DriverManager.getConnection(oracle:jdbc:thin:@myhost:1521:instance, "usrname", "password");
If this works you're able to connect! so check that your oracel datasource is well specified in your deploiement descriptor and that your bean references this datasource.
hope it helps

E61 - Latest Firmware - What does this error mean ...

What does this error mean?
Profiles in same realm must have same user name
I am trying to setup a PBXes.com account and since I upgraded firmware I get this message now, when trying to save a profile.
There were no other profiles in the same prior, is this somethign stuck from an old configuration.
Rae

Actually I just fixed it by deleting the profile and entering it as new. I saved it after each step of the profile creation process and was able to reproduce the problem when I entered a password on the proxy settings but not yet on the registry settings. Once I entered the same user name and password on both proxy and registry, I was able to save the profile again. So I guess I must have mistyped the password in one of the settings before.

What does this error mean? There was an error in the App Store. Please try again later. (100)

what does this error mean? There was an error in the App Store. Please try again later. (100)

I have the same problem and thought it might be related to moving to Denmark. My app store account was set up for USA and then the error number in parentasis was (13). After changing the profile to Denmark the number changed to (100), like yours

While importing a CD into my iTunes library I kept getting the following error message- iTunes library cannot be saved- An unknown error occurred (-54). What does this error mean and what can I do about it??

While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54). what does this error mean and what can I do about it??

The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .

What does this error means? "Line 20 column 57: character content of element "language" invalid; must be a string with length equal to 3 (actual length was 7) at XPath /package/book/metadata/languages/language" "

Hi there.
I am about to publish a book in English and Chinese.
What does this error means?
Line 20 column 57: character content of element "language" invalid; must be a string with length equal to 3 (actual length was 7) at XPath /package/book/metadata/languages/language"
And where is line 20, column 57?
Thanks folks!

Go into iTunes Producer and select from the dropdown, don't type.
cs
iBooks Author Guide

My incoming emails are bouncing back to sender. Administrator says user acct. is temporarily overflowing". I have emptied my trash as well as my inbox. This is in my iPad. Any suggestions?

My incoming emails are bouncing back to senders. Administrator says the user account is temporarily over quota. I have emptied all trash and most of the inbox and have rebooted, but still am not getting emails. Any suggestions?

have you tried deleting emails directly on your webmail? see if it works

What does this error mean: Adobe Illustrator CS5 15.0.2 Update There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207

When I click on the adobe installer icon to update my products, I get this message:
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207
What does this mean and how do I solve it?

See if the following helps:
Error downloading, installing, or updating Creative Cloud applications

What does this message mean when i dial

What does this verizon message mean?
'your call cannot be completed as dialed'
i got a number on my caller id from my ex's neighborhood
609-424-xxxx
its not his (old, home) number, but i am concerned that he got a new number or maybe called from a pay phone--
he has a history of psychological abuse
i tried calling the number back from a pay phone from the next county to see if i could find out thatit wasn't him to put my mind at ease..
but i got the above message
i dialed the number that was on my caller ID
would this message come up if it were a payphone that does not take incoming calls?
why else would i get the message.
thats the number that came into my caller id, but i am told it can't be completed as dialed..
i was calling from the 732 area code and did use the full number with the area code
i tried googling the number and doing a reverse look up
we live far apart--i don't know anyone else in his town--its too much of a coincidence to just be a wrong number
there is not enough to file a police report yet

This seems to suggest that it could be filenames… (see the final posts).
https://discussions.apple.com/message/7818914?messageID=7818914#7818914?messageI D=7818914
Replace dashes, underscores, hyphens & any other funky looking characters. Very long filenames of folder paths may cause trouble too.

What does this error mean? How do I fix it?

I apologize if this is sent twice. I don't see it on the forum anymore, and I really need an answer.
What does the following error mean? How do I fix it? Both HelloWorld.class and Hello.html are in the Java directory. I also get an error when I try to run the applet in a browser--applet noninited. I'm just trying to go through the tutorial, but they don't mention this as one of the errors possible.
In the MS-DOS prompt when I try to run the appletviewer, I get:
C:\Java>appletviewer Hello.html
load: class HelloWorld.class not found.
java.lang.ClassNotFoundException: HelloWorld.class
at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:151)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.applet.AppletClassLoader.loadClass(AppletClassLoader.java:112)
at java.lang.ClassLoader.loadClass(ClassLoader.java:262)
at sun.applet.AppletClassLoader.loadCode(AppletClassLoader.java:478)
at sun.applet.AppletPanel.createApplet(AppletPanel.java:548)
at sun.applet.AppletPanel.runLoader(AppletPanel.java:477)
at sun.applet.AppletPanel.run(AppletPanel.java:290)
at java.lang.Thread.run(Thread.java:536)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(AppletClassLoader.java:224)
at sun.applet.AppletClassLoader.access$100(AppletClassLoader.java:40)
at sun.applet.AppletClassLoader$1.run(AppletClassLoader.java:141)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(AppletClassLoader.java:138)
... 8 more
Thanks for any help on this topic.
booktoad28

Can you post the HTML that calls for the applet?

What does this error mean? -01555

I received this while updating around 8 million records with a stored procedure.
The same procedure I've posted in here for assistance.
Error code -1555 Error descORA-01555: snapshot too old: rollback segment number
6 with name "R106" too small

Usually, this indicates that you're doing a fetch across a commit. I'm guessing your code looks something like this, where you're committing after some number of rows:
for x in (select lots_of_rows from big_table )
loop
<< Do some processing >>
if( count % 10000 = 0 )
then
commit;
end if;
end loop;
The problem here is that Oracle needs to keep a consistent view of your select query at the time you issued the query the entire time that your loop is running (which requires that it keeps all the changes in the rollback segmets). When you issue a "commit" however, you tell Oracle that it's not necessary to keep the existing rollback information-- it's free to overwrite it. Eventually, that's exactly what it did.
The two general solutions to this are:
1) Don't commit until you're actually done. This will be faster, since commits are expensive operations, but it will require more rollback segments, possibly requiring that you allocate more disk to rollback.
2) Modify your code so that it's re-entrant. In other words, have a query that can be re-run when you encounter an error and that takes advantage of the previous work. Then, you'll need to keep re-running the query until it finishes.
asktom.oracle.com has much better explanations of what's going on with this error. Search for "fetch across commit" and you'll get plenty of info.
Justin

HELP! What does this ERROR mean???

Hey ya all...=))
I have a situation and was hoping that you guys could look into it. I am currently working on my project using NetBeans 5.5. I downloaded the Sun Java System Application server (SJSAS) for project purposes. As usual, I will need to start the server. However, a pop-up error occured indicating that the server is not functioning due to certain reasons. I do not know how are the errors related to my project. Thus, I seek help from all you brilliant thinkers!
P.S: The Error says;
The Sun Java System Application System could not start.
More information about the causes is in the Server log file.
Possible reasons include;
- IDE timeoout: refresh the server node to see if its running now.
- Port conflicts. (use netstat - a to detect possible port numbers already used by the operating system.)
- Incorrupt server configuration (domain.xml to be corrected manually)
- Corrupted Deployed Applications preventing the server to start. (This can be seen in the server.log file. In this case, domain.xml needs to be modified).
- Invalid installation location.
What I've done so far;
- I placed the Server installation in :C drive.
- I also receive an output in NetBeans stating that it could not listen on port 1527 on host localhost.
- The project im currently working on is Java Pet shop to explore on the API codes.

Hi,
It mean that you are traying read the character number (string.length()+16)... you are out of index by 16 characters
example:
String str= "Any Text";
// if I execute
// str.substring(50)
Java say:
java.lang.StringIndexOutOfBoundsException: String index out of range: -42
--> String str value ("Any Text"), length are 8 character... I try to read the 50 charcter... then out by 42 !!
Enjoy !

What does this error mean in idoc_apapter

Hi,
Im getting this error while doing a flat file to an idoc scenario.
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:Stack>Unable to interpret IDoc interface MI_ZPURCHASEORDER01_Inb</SAP:Stack>
Can anyone explain me what to do.
Thanks in advance,
Bhargav

Hi,
here are some useful links based on IDoc..Go through this....
IDOC - File scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
configuring IDOCS
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
IDOC scenarios
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Idoc related setting
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
For troubleshooting of IDOC-File check this blog:
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
regards,
vasanth

What does this error mean when emails are bouncing back to sender?

Similar Messages

Maybe you are looking for