What does this key combo mean, what's it doing?

mark an in and mark an out - anywhere in the timeline of an open sequence,
type the following keyboard combo:
Control, O
or Control, I
Whats up with the red line that now extends between marks in the timeline and canvas?? Is it setting me up to create a split edit?
Curious.. Thanks for thoughts, direction.

Yes, split edit. Go to Mark > Mark Split to see your other short cuts. Handy way to do an L-cut with out trimming or slipping transitions in the timeline.

Similar Messages

What is this key for? What is it called?

I have searched and searched, on Google, Wiki etc. but there's no mention of this key, not even in the manual:
http://www.paulofierro.com/images/secondaryEnterKey.jpg
On my MacBook Pro, it is placed in the bottom, between the Apple-key and the left-arrow key (on the right of the space bar).
What is it's use? What is it called? And why is the symbol also on the enter-key?

On my MBP it doesn't have a symbol, but instead says "enter," and has the exact same functionality as the "enter/return" key.
It's there for using the numpad. If you hit "num lock," then use keys 7,8,9,u,i,o,j,k,l,m,. it turns into a numpad equivalent to what's on the right edge of desktop keyboards. Much like a desktop, while you're using the number subscripts on these keys, there's always an enter key at the bottom right edge (makes it easier for entering long sets of numbers).
Even without num lock on, this secondary enter key still functions just like the primary enter key for regular functions.

What does this message icon mean on a blackberry?

What does this message icon mean on a blackberry? so when i send a text message it normally place a check mark with a small D above it. But i just got one with just a check mark, with no D above it. and i was wondering what it meant? oh and i have the blackberry tour, but it may be the same on all blackberry phones.

check means sent over network
D means delivered.
R means read.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

What does this Bridge message mean?

I have a new Mac (and Photoshop Elements 11) and when I open Bridge I get this message:
OLSException in OLS Adapter Startup
/OLS/development/main/bridge/3.2.0/build/mac/../../sdk/src/COLS.cpp#19 : 16
Should I be worried?
(I've tried using PSE Organizer and I hate it. I'd rather stick with Bridge unless I'm headed for trouble.)
What does this Bridge message mean?

Bridge came with an earlier version of PSE, PSE6 I think. The Organizer comes with PSE 9 and PSE11. Like some other PSE users, I much prefer Bridge to the Organizer. I had no trouble using Bridge with PSE9 and an older Mac. But with PSE11 and my new Mac, I started getting this message. I wonder if anyone knows what this message means, if it portends trouble for me, if there is anything I should do to correct it?
I posted this question on the Elements Forum and was told that it should be addressed on the Bridge Forum.

What does this error message mean and how do I solve it? "Sorry, one or more of the following command-line tools was not found: /usr/bin/lsbom, /bin/pax, /bin/mkdir, /bin/chmod, or /usr/bin/update_prebinding."

When I try to open up this program, Pacifist, I receive this error message. Here's a screenshot. http://i.imgur.com/v717w.jpg What does this error message mean and how do I solve it?

It sounds like some of the Unix Executable commands were removed (or the permissions to those were modified) out of the /usr/bin/ folder. You can try opening disk utility and repairing permissions on Macintosh HD or you can reboot your computer and holding down option-r when it comes back up to reinstall Lion again. This will not delete your personal information or applications you have installed but it would be best to back it up to Time Machine before you do. The article on how to do this is here. (http://www.apple.com/macosx/recovery/) I have had to do this before and it works like a charm. It should fix your issue but grab a cup of coffee because its going to take about 35 - 40 minutes depending on how fast your computer is.

What does this error message mean? disc recording not found

What does this error message mean? disc recording not found

Often it suggests issues with device filters in your registry. But it's probably best to check the situation more closely.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

When synchig my iphone to my itunes, I get an error message at the end with code 1150. What is this error code and what does it mean?

When synching my iphone to my itunes, I get an error message at the end with code 1150. What is this error code and what does it mean?

try uninstalling and reinstalling itunes on your computer. here is a link for that http://support.apple.com/kb/HT1925

TS1846 What does this error message mean?

What does this error message mean? I am trying to burn a project to DVD...
Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition.

The project is 1:22:30 - 1080P HD (4.9GB)...I am using the share drop down and hitting DVD...I am using a DVD+R Dual Layer 8.5GB...It processes for about an hour and a half the status bar gets almost done and then the error message comes up...thanks for any help you can give me

TS1702 0xE8000004-what does this error message mean?

0xE8000004-what does this error message mean? I get it when trying to sync my Garmin USA app.

See http://support.apple.com/kb/TS3221.

What does this error message mean? MFMessageErrorDomain error 1028.

What does this error message mean?
MFMessageErrorDomain error 1028.
I can't seem to delete a message from my mailbox. The above error message comes up every time and the message then reappears in my inbox.

Back up all data. Rebuild the mailbox. Try to delete the message again. If you still can't, continue.
From the Mail menu bar, select
Mail > Preferences > Accounts > Advanced
From the menu labeled
Keep copies of messages for offline viewing
choose
Don't keep copies of any messages
Close the window and save the change. Relaunch Mail and test.

What does 'shared key authentication' mean?

What does 'Shared Key Authentication' mean?

Shared Key Authentication (SKA) is a process by which a computer can gain access to a wireless network that uses the Wired Equivalent Privacy (WEP) protocol. With SKA, a computer equipped with a wireless modem can fully access any WEP network and exchange encrypted or unencrypted data.

What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
Product and Software: This article applies to AP-105.
The root cause of this error is that the AP cannot perform a code upgrade.
Scenario 1
Check the ArubaOS code.
The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
Scenario 2
If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
Scenario 3
The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
apboot> setenv ipaddr <ip address>
apboot> setenv netmask <netmask>
apboot> setenv gatewayip <ip address of the gateway>
apboot> setenv master <ip address of the master>
apboot> setenv serverip <ip address of the TFTP server>
apboot> setenv bootcmd tftp
apboot> save
apboot> boot
Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
Built: 2011-01-07 at 13:42:04Model: AP-10x
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0xffffffff
eth0 up: 1 Gb/s full duplex
DHCP broadcast 1
DHCP IP address: 192.168.x.xx
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.x.xx
DHCP DNS server: 192.168.x.xx
DHCP DNS domain: xx
ADP multicast 1
ADP broadcast 1
ADP multicast 2
checksum bad
ADP broadcast 2
checksum bad
ADP multicast 3
checksum bad
checksum bad
checksum badRetry count exceeded
DNS request 1 for aruba-master to 192.168.x.xx
checksum bad
checksum bad
checksum bad
T Using eth0 device
TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: checksum bad
T T checksum bad
T checksum bad
checksum bad
checksum bad
T checksum bad
checksum bad
T T checksum bad
T checksum bad
checksum bad
T T T
Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum badARP Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplexchecksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad ThanKs :)

What does this log entry mean - Cancel initiated for Exchange Producer

Is there anybody who can tell me what could this log entry mean:
--Cancel initiated for Exchange Producer: <<66800621>> DbGateway Exchange*
I'm asking because I have problem. In two physical sources (physical databases) I have two tables TABLE_1 has 60k rows TABLE_2 has 1 row. Next step these tables are "Binary Join" by BI server
so it looks like here:
-------------------- Sending query to database named OBI (id: <<66800621>>):
select T7101.SYMBOL as c1,
T7101.TABLE_1 as c2
from
TABLE_1 T7101 /* TABLE_1_ALIAS */
order by c2
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Sending query to database named OBI_BACK (id: <<66800638>>):
select T46142.KATEGORIA as c1,
T46142.FIRMANO as c2
from
TABLE_2 T46142
order by c2
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800638>>, Close Row Count = 1, Row Width = 24 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Cancel initiated for Exchange Producer: <<66800621>> DbGateway Exchange
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800621>> DbGateway Exchange, Close Row Count = 3, Row Width = 80 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800638>> DbGateway Exchange, Close Row Count = 1, Row Width = 24 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800654>> Binary Join, Close Row Count = 0, Row Width = 104 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800582>> Projection, Close Row Count = 0, Row Width = 76 bytes
As you see first is executed select from TABLE_2 (Node: <<66800638>>, Close Row Count = 1) and this is correct number of close row count
next we have
Cancel initiated for Exchange Producer:(for node with SELECT ROM TABLE_2) - and I don't know what that's mean
and after this we have
Execution Node: <<66800621>> DbGateway Exchange, Close Row Count = 3
And this is incorrect number of CloseRowCount (should be aprox. 60k)
Finally result is wrong because we have no records (inner join by BI Server doesn't work :( )
Thank you for help
Edited by: markog on Mar 3, 2010 2:03 PM

I'm wrestling with getting all of this to work myself.
Can you see the job in XGrid Admin? It sounds as if the job is failing, but I can't be sure. Clicking on the job in XGrid Admin should give you a "play by play" and tell you where it is failing.
My experience has shown me that permissions is the root cause of alot of issues, and I cannot find any clear reference on what permissions the "Podcasts" folder needs to make all of this work.
Following the documentation, the "pcastxgrid" user doesn't actually get assigned any permissions via the file system or Group membership, so I'm not sure how all of this needs to be set.
Hope this helps.

HT201342 Why does this concern me and what are the advantages?

Why does this concern me and what are the advantags to @Icloud.com?

It is not an address change but an addition to your current @mac.com, @me.com email addresses. Use whichever one you prefer.

FIREFOX HAS AGAIN CRASHED.WHEN I WENT TO MOZILLA HELP IT SAID THAT THE REASON FOR THE CRASH WAS "EXCEPTION_ACCESS_VIOLATION_WRITE".WHAT IS THIS SUPPOSED TO MEAN?THE CRASH SIGNATURE IS: F1181469137_________________________________________

FIREFOX HAS AGAIN CRASHED.WHEN I WENT TO MOZILLA HELP IT SAID THAT THE REASON FOR THE CRASH WAS "EXCEPTION_ACCESS_VIOLATION_WRITE".WHAT IS THIS SUPPOSED TO MEAN?I SAW THAT THIS WAS THE REASON FOR EVERY CRASH IN FIREFOX.HOW DO WE MEND IT?
PLEASE HELP.

Thank you but there are more important issues going on about my Medical records that are being falsified that I am trying to report and hopefully get help with. I know this isn't the best forum to do this but it is the most secure forum available to me to hopefully get some help with my continuous problem.
Were you able to see the problem of medical record fraud that I have posted in this tread? Thank you for your help.

What does this key combo mean, what's it doing?

Similar Messages

Maybe you are looking for