What does this message mean - The operation can't be completed because the item "12b" is in use.

The operation can’t be completed because the item “12b” is in use.  What does this message mean.  It appeared as I was attempting to clear my time machine backup?

Reboot your machine make sure Aperture doesn't start (as Lion is liable to do) and try it.

Similar Messages

  • Everytime I try to export my slideshow I get the "The operation can't be completed because the item can't be found." message. How do I fix?

    Trying to export a pretty basic slideshow to our desktop/iTunes and I keep getting the "The operation can’t be completed because the item can’t be found." message when I try to export. What am I doing wrong?

    What is your iPhoto version?
    Your slideshow may contain a photo or a video where the original file cannot be found. Try to find the offending item.
    You could duplicate the slideshow (select it in the source list, ctrl-click, and the select "Duplicate").
    Then remove half of the photos from the copy and try to export this partial slideshow. if it works, you will know, the problematic photo or video is in the other half.
    Keep duplicating the slideshow, removing photos from the copy and testing with smaller sets of photos, until you know exactly, which photo it is.
    Then select this photo and use the command "File > Reveal Original" to see, if the original file is still there.
    Check the revealed original, if Preview can display it. If the file is o.k., copy it and remport it. Add the new imported photo or video to your slideshow.
    If the original file should really be missing, restore it from your backup.

  • Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

    Hi
    I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message  " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
    Anyone who can help? Thanks..
    Br. Bo

    Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
    Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
    Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
    http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
    Or try the methods apple recommends..
    OS X Yosemite: Set permissions for items on your Mac
    It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

  • Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

    Hi Apple community!
    I have a [rather worrying] problem.
    When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
    " The operation can’t be completed because an item with the name “.DS_Store” already exists. "
    I am not given an option to skip this file or anything else.
    But I simply cannot complete the operation!
    I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
    but no success.
    The same thing keeps happening.
    At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
    but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
    So effectively, it seems I cannot backup my files anywhere!
    Any help or advice would be greatly appreciated.
    Thank you.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Error message "The operation can't be completed because an item with the name .DS_Store already exists"

    Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message  "The operation can't be completed because an item with the name .DS_Store already exists".
    The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
    All file types are susceptible
    the HDs are all Mac OS X formatted, no foreign file formats involved
    the HDs are all journal-enabled, OS X extended formats
    have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
    any ideas anyone?
    would appreciate any thoughts or sugestions, this has got me beat
    the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
    many thanks for any suggestions

    This is definitively a nuisance. When copying large amounts of files between volumes  try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
    gunnars-mac-mini-i7:Volumes gunnar$ man ditto
    NAME
         ditto -- copy directory hierarchies, create and extract archives
    SYNOPSIS
         ditto [-v] [-V] [-X] [<options>] src ... dst_directory
         ditto [-v] [-V] [<options>] src_file dst_file
         ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
         ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
         ditto -h | --help

  • Firefox is unable to update to 7.0.1. I get an error that The operation can't be completed because the item "libsmime3.dylib" is in use. I found this is a Cisco folder, tried to trash it, but it won't leave. Maybe I need it?

    The operation can’t be completed because the item “libsmime3.dylib” is in use.
    This is the error message I get when i try to install the 7.0.1 update. I found a cisco folder on my MAC and tried to Trash it. It won't leave. Maybe I need it... Some of it did Trash, but what ever is left continues to prevent 7.0.1 from installing.

    OK I looked at an old Apple forum and someone suggested Trash then Restart then Empty Trash, and it worked. Cisco is gone, Opt is gone, and I was able to load FireFox. I had to give admin passwords to do this too. Why an old weird game or library folder could cause such obstacles is a wonder. But I'd rather wonder about other things...

  • Iomega UltraMax 4Q PLUS the following message appears: The operation can not be completed because the item "FILE NAME" is in use. "

    Help, I need to solve. No speculation please bomas or attempts to restart, confirm that the HD is formatted for MAC and etc. .....
    Whenever I try to copy my files from my HDD Western Digital 2T for my new Iomega UltraMax 4Q PLUS the following message appears: The operation can not be completed because the item "FILE NAME" is in use. "
    I can not stand it anymore ...
    I need to work and not temnho more space on my machine.
    Scenario - iMac11, 10.6.8 + WD + 2 + 2T 4T Iomega UltraMax Plus, formatted for both Mac and connected via Firewire 800
    Trying to copy the message aborts the copy - "The operation can not be completed because the item" FILE NAME "is in use."

    Hello,
    As I said earlier, properly formatted for Mac.
    Mac OS Extended (Journaled)
    This HD is formatted for MAC factory, but I even did a few times in my attempts I can say that this is entirely correct formattingwith it - Mac OS Extended (Journaled)

  • Can't copy Aperature Library to external.  Get this error "The operation can't be completed because an item is being modified."

    I have been trying to find a solution to this problem by browsing this forum but I can't seem to find a solution.
    As many others have decided to do I want to copy my Aperature library to an external FW 800 drive as my laptop space is dwindling.  It seems all you need to do is copy the Library from the finder which can also be revealed in the preference if Aperature.  When copying it seems to transfer for a few seconds but then I get this error "The operation can’t be completed because an item is being modified."  I have formatted the drive correctly and there is no issues with Aperature itself so why do you think I am having this error?  What can I do to copy this Library to my external?

    Reboot your machine make sure Aperture doesn't start (as Lion is liable to do) and try it.

  • Trying to upgrade to FireFox 4 and getting this error: The operation can't be completed because the item "libsoftokn3.dylib" is in use.

    I am using a new MacBook Pro. I click on the "Download FireFox 4.0" button. The file(s) download and the dialog appears to drag FireFox icon into the Applications folder.
    I get a dialog that says "There is a previous version.. Ok to replace?" I click "Replace".
    Then I get a Copy dialog that says: "The operation can’t be completed because the item “libsoftokn3.dylib” is in use."
    The software is not updated and I am still on FireFox 3. I tried rebooting and doing it again - I get the same results. I also did a web search and was not able to find a solution to this error.

    I had success by:
    1- Quit Firefox
    2- Go to the Applications folder and drag Firefox to the desktop
    3- Install Firefox 5 (it installs successfully at this point)
    4- Put old Firefox in the trash
    5- Secure empty trash
    It may be possible to just drag Firefox directly to the trash and use regular Empty Trash, but I did not try that. Some people on the net reported that they could not empty the trash after putting the old Firefox in the trash (got the same "libsoftokn3.dylib is in use" error), so I just tried Secure Empty Trash, which may be no different from a regular empty trash as far as this goes; not sure as I'm a bit new to the Mac.

  • Trying to delete file from trash but get this: The operation can't be completed because the item "File name" is in use. All other files delete except this one. Please help

    Trying to delete file from trash but get this: The operation can’t be completed because the item “File name” is in use. All other files delete except this one. Please help

    Maybe some help here:
    http://osxdaily.com/2012/07/19/force-empty-trash-in-mac-os-x-when-file-is-locked -or-in-use//

  • The operation can't be completed because backup items can't be modified.

    In my Time Machine backup, I have also stored backups from my previous Mac. They do not appear in the "Star Wars" screen. When I try to delete files I receive the message: "The operation can’t be completed because backup items can’t be modified."
    What does this mean, and is there a way to delete said files?
    (My Time Machine backup is plugged in and running. The files are not even sent into the Trash, so my question doesn't relate to whether the files will delete from the trashcan, etc.)
    Many thanks in advance for any and all help!

    While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to delete. Right-click or control-click an item. From the popup menu, select Delete All Backups of... Confirm. Exit Time Machine.

  • The operation can't be completed because the original item ".." can't be found.  Need a fix!

    Ok.  This is my first and hopefully only discussion ever!  Thanks in advance for all the help.
    I had set up my network and this was all working fine for months.  Time Machine did proper back ups and I could store files on the drive as well over the network.  Not sure how, or exactly when this error began.  It may have had something to do with the upgrade to Mavericks.
    But I can see the drive when I open Finder (which I have named Airport) can then access the directories but will not load any of the files.  If the Finder window is closed and I try to access the external drive again via the network, I am prompted with.."The operation can't be completed because the original item ".(Airport)." can't be found. Also of note...there is no "eject" option beside the name of the drive.
    I have found only one solution that was dated in 2008 where someone was deleting volumes from their machine and the instructions were not quite clear, so I'm hoping for some new insight on this issue.  Honestly, I just didn't understand how to do what he said...several have asked him to elaborate but no further explanations and all other links are now dead.  It seems this is a common issue.  I'm aware many people will read this and want to say..."i Have this problem too, when im doing something with windows and other computers..."  There are many solutions for these situations that I have found....but no recent ones for those with ONLY one drive and an airport extreme running only Apple computers.  So guys, lets try to keep this thread for one topic only.  Hopefully a quick and helpful thread with a few replies and some step by step directions to solve everyones toubles.
    I even had my router replaced and still the same issue.  Also, the hard drive works perfectly when hardwired to my computer.  So the issue must lay within the settings of my MacBook Pro, OS X 10.9.1.  If you feel I should provide any other information I would be happy to do so!

    Lexvo,
    Thanks for the input.  I had to look up what SMB stood for, server message block?  So I'm assuming this is not something I'm using.
    Also, this is not a "sometimes" problem.  This is a consistent and reproducible issue. 
    As far as an update...I dont see an OS update fixing my issue unless something is overwritten, but maybe not. 
    I think a good point to consider and open to discussion is why does logging in as a root user solve the issue?  What can be done or manipulated to allow functionality with my regular login info versus a root user?

  • The operation can't be completed because some items had to be skipped. For each item, choose File Get Info, make sure "Locked" is deselected, and then check t

    The following error comes up when I try to install the updated Firefox:
    "The operation can’t be completed because some items had to be skipped. For each item, choose File > Get Info, make sure “Locked” is deselected, and then check the Sharing & Permissions section. When you are sure the items are unlocked and not designated as Read Only or No Access, try again."
    When I follow the instructions in the error message, it shows that my user name has read and write access. There are a couple other items that are read only. I tried to change this to read and write, but the Sharing and Permissions options are greyed out and will not let me change them. What is the work around for this? I would really like to install the new firefox.
    Thanks.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default('''This will NOT delete profile info such as bookmarks and history'''):
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.

  • Problems accessing time capsule data "The operation can't be completed because the original [...]"

    So as my title would suggest, I'm having time capsule issues.
    First of all, I'm running a MBPret late 2013. Currently I'm trying to setup my time capsule in my university dorm room for two reasons:
    1) I want to use the internet they provide us.
    2) I want to use time capsule as a backup drive.
    I am not permitted to use wifi as per my contract with the university, unfortunate, but fine, I can use ethernet, I have the ethernet -> thunderbolt adapter.
    Now, thus far, I've setup my time capsule normally (this is second setup not the first) and I performed a hard reset before connecting it all here. Before here it was setup at my previous house. After that I disabled the wireless and enabled secure shared disks "with device password".
    I don't have internet access yet, though I believe this is a problem on the administrator side not mine, but the real problem is that I cannot access the data folder on my time capsule in finder. I've tried erasing the volume, hard resetting and setting up again, I keep getting the same error message:
    "The operation can’t be completed because the original item for "Data" can't be found"
    Any suggestions?
    Regards

    If you don't have applecare you will need to pay if you want the genuine article but your problem is familiar and Apple support is likely to say your the first person they have ever heard of with this problem.. even when every second post here refers to it.
    Here is my standard list. Work through it and tell me if you succeed.
    The cause is Yosemite btw.
    A factory reset of the TC is the start.. it is required so you can find it again.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    This user has had success and a few others as well.
    RáNdÓm GéÉzÁ
    Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • The operation can't be completed because the original item for " your drive name here " can't be found

    Hey all,
        I hope someone can help.  I am running 10.7.5 OSX currently on my Mac Book Pro.  I recently got a new Windows 8 desktop.  A ceap one running Windows 8.  I currently have 5 drives shared over my home network.  3 are working just fine (the 3 I just put on the network today).  The other 2, however, were previously on my old Windows Vista computer also shared over my network.  My Mac Book Pro had access just fine (I set up sharing on my vista comp) and everything ran smooth.  Today when I hooked up my new Windows 8 computer and put the 5 drives on and shared them via my network, same way as I done before, 3 are working fine but the two original drives give me an error when I try and access them from my Mac over my home network.  They both show up with the correct names but when I try and access them it tells me:
    The operation can’t be completed because the original item for “M&V” can’t be found.
    M&V is the name of one of the drives.  Here is the trouble shooting I have done:
    - Renamed the drives multiple times
    - Tripple checked my permissions
    - Checked for updates and installed both on my PC and Mac
    - Restarted my PC and Mac
    - Tried Both of my dual frequencies on my netowork
    - Tried hooking up with ethernet cable
    - Changed the user name and password for my shared access on my PC multiple times and put in the correct info on my Mac
    - Tried taking away all passwords (unsecured)
    - My other Windows PS's can access all drives just fine
    But still I get the above error.  I have isolated it to an issue with my Mac. I was thinking maybe if there is a way to have my Mac forget the shared drives and I can re-add them and put in my password, I am not sure if that is even possible. I am at al loss on what to do.  Any help you can give would be greatly appreciated. 

    I am having the same exact issue and I've been busting my testi-balls to figure it out. I've got 15 years experience in the computer game and still can't figure it out. I see a lot of people having similiar issues, but no one seems to have an answer for MY issue, which is virtually the same as the OP.
    Brand new Macbook Retina.
    Windows 7 x64 Machine.
    ALL drives shared with ALL permissions of ALL accounts manually inserted on the Windows 7 side.
    ALL other PC's in the house can access the drives on the Windows 7 machine without issue.
    Only the Macbook Retina has the problem connecting. Every Windows drive I shared is visible under "network" in finder, but when I click on any of them it gives the quoted error message the OP stated.
    PLEASE, if anyone finds a fix for this, let us know!

Maybe you are looking for

  • How do I change the width of a lead column in an enhanced layout ?

    I have an enhanced layout in BPS that gets rendered in TPM (CRM2007) application. I need to increase the width of a lead column in this layout. I saw a bunch of methods in a BADI UPX_LAYOUT_RENDER. There is one to manipulate XML and another to manipu

  • Email queue on java

    Hello, first of all I'm new to Java. We've a service written with PHP which sends a lot of emails to our users. Right now all new email messages added to MongoDB and by cron script(PHP) we send them out. I'm trying to implement a Mail Queue Daemon wi

  • Character Set questions on setup

    I am trying to determine what the best setup recommendations are for creating non_English Oracle 10g databases. I have not had much experience building databases for non_English locales, so this is getting a little overwhelming as I have been researc

  • Installer problems

    I am trying to install things to mac, will not allow me to install anything. The installer comes up, then stops and say error message no bill of material. I close that and it returns to the installer and the only option is close. May have trashed ist

  • IPhoto and Calendars

    Hullo all, I note the question of 'being unable to load Calendar or Books' to be not uncommon. I have found that I cannot open up the calendar or book options after creating a folder.... previously this was not a problem. Back in April I created a bo