What does this server error mean?

I have in my application the cferror command, & I've been
getting error emails alot lately.
It doesn't really matter what line #,page, or query 'cause it
is different the emails.
I switched to hostmysite & used the cferror when with
them. I didn't use it where I was before so I'm not sure if it had
happened before.
[QError occured in template:/listing.cfm
At this time:{ts '2006-08-01 02:13:11''}
The query string was:Cid=32
]Error starting thread: Not enough storage is available to
process this command. null <br>The error occurred on line 10.
Also during this same time frame someone was having a session
& I got...
quote:
Error occured in template:/cart/applytoMem-fr.cfm
At this time:{ts '2006-08-02 02:18:46'}
The query string was:
A detailed diagnostic follows:
Element CART is undefined in SESSION. <br>The error
occurred on line 17.
Not too good when it causes people to not shop.

I started two threads on this subject. I am closing this one.

Similar Messages

What does this console error mean?

I just got my 13" non-retina MacBook Pro back from the Apple Genius bar since the cable that connected my hard drive was failing. Before I brought it in, it suddenly went from an OK speed to a something is wrong speed. But before I took it in on Monday, I opened up the console and it had these errors that had to do with like the SMC and such. Before they took it in, we re-formatted my hard drive and re-installed OSX. That didn't fix it and the last backup I had on my Time Capsule was April 3 of this year. When I got it back, I transferred my data from the Time Capsule so I didn't have to re-install all my programs and such and I had a VERY important video stored on the Capsule. And today, I noticed while in my science class, the top bar on the top of the screen wtih the Apple symbol was missing. I shut it down and performed a disk utility, SMC reset, and PRAM reset and those errors are still there. Also when I went into iPhoto to retrieve the video I had, photos would appear in the boxes for a split second and then disappear and when I try to vew them, I got a triangle with an "!" within it. I can open them in Aperture but no videos can be accessed. But back to the errors. I get these two errors as a pattern in the console:
4/9/14 12:46:44.000 PM kernel[0]: SMC::smcReadKeyAction ERROR TC0D kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8022443000
4/9/14 12:46:49.000 PM kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8022443000
What do they mean and how do I fix them? So far, there aren't any major performance issues, it just runs a little slower than before. I bought my MacBook brand new in September of last year (2013) with all standard configurations but I did upgrade the RAM from 4GB to 8GB since I'm a mobile DJ. I haven't contacted Apple yet but I will when I get home later today since I'm still in school. And also when I try and open the files stored on my time capsule, it says I don't have permission to. Like... It's the same computer. It was restored from a Time Machine Backup. How do I allow the correct permissions? This is my computer, no one else uses it unless my brother wants to connect friends/family in minecraft.

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Triple-click anywhere in the line below to select it:
sudo mdutil -t 416080
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

What does this PK error mean?

I just purchased and refurbished MacBook Pro with Mavericks. Apple store reloaded the OS to see if that was and issue but, the issue still exists
White screen hang on bootup
Solid Blue screen during bootup sometimes
Sometimes blue screen with Black lines
Sometimes boots up fine.
Have issue going into safe mode sometimes
PK Error
Anonymous UUID:       FC7FFF3E-2791-C382-1C49-
A32667F85A2B
Mon May 5 19:26:20 2014
Machine-check capabilities: 0x0000000000000c09
family: 6 model: 42 stepping: 7 microcode: 40
signature: 0x206a7
Intel(R) Core(TM) i7-2635QM CPU @ 2.00GHz
9 error-reporting banks
Processor 2: IA32_MCG_STATUS: 0x0000000000000005
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e):   0x00003f7f89abe6ef
IA32_MC3_MISC(0x40f):   0x000000000003ffff
Processor 3: IA32_MCG_STATUS: 0x0000000000000004
IA32_MC3_STATUS(0x40d): 0xbe00000000800400
IA32_MC3_ADDR(0x40e):   0x00003f7f89abe6ef
IA32_MC3_MISC(0x40f):   0x000000000003ffff
panic(cpu 1 caller 0xffffff8008adc709): "Machine Check at 0xffffff7f8909eb29, registers:\n" "CR0: 0x000000008001003b, CR2: 0x00007fa073b00000, CR3: 0x000000000b624000, CR4: 0x00000000000606e0\n" "RAX: 0x0000000000000031, RBX: 0xffffff8014a54800, RCX: 0x0000000000000001, RDX: 0x0000000000000000\n" "RSP: 0xffffff808a26bd40, RBP: 0xffffff808a26bd70, RSI: 0x0000000000000007, RDI: 0xffffff8014061e00\n" "R8: 0x0000000000000000, R9: 0x0000000000000007, R10: 0x0000000000010000, R11: 0x0000000000000200\n" "R12: 0xffffff8014026b40, R13: 0x0000000000000007, R14: 0xffffff7f890b3e20, R15: 0x00000000000008f8\n" "RFL: 0x0000000000000046, RIP: 0xffffff7f8909eb29, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2422.92.1/osfmk/i386/trap_native.c:1 68
Backtrace (CPU 1), Frame : Return Address
0xffffff80828b5e80 : 0xffffff8008a22fa9
0xffffff80828b5f00 : 0xffffff8008adc709
0xffffff80828b6060 : 0xffffff8008af3c1f
0xffffff808a26bd70 : 0xffffff7f8908f663
0xffffff808a26be70 : 0xffffff7f8908e899
0xffffff808a26bf30 : 0xffffff8008add73c
0xffffff808a26bf50 : 0xffffff8008a375ba
0xffffff808a26bf90 : 0xffffff8008a37908
0xffffff808a26bfb0 : 0xffffff8008ad7047
      Kernel Extensions in backtrace:
          com.apple.driver.AppleIntelCPUPowerManagement(216.0)[70947979-EA9B-39D1-AD15-CD AB19F031AF]@0xffffff7f8908c000->0xffffff7f890b6fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13C1021
Kernel version:
Darwin Kernel Version 13.1.0: Wed Apr 2 23:52:02 PDT 2014; root:xnu-2422.92.1~2/RELEASE_X86_64
Kernel UUID: E9CF78E2-1E9F-3B6F-81A4-FEE6C6D0E4D5
Kernel slide:     0x0000000008800000
Kernel text base: 0xffffff8008a00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 78633913520
last loaded kext at 50317622019: com.apple.driver.AppleHWSensor    1.9.5d0 (addr 0xffffff7f8a47d000, size 28672)
loaded kexts:
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AudioAUUC    1.60
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.2.3f10
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.kext.AMDFramebuffer    1.2.0
com.apple.driver.AppleTyMCEDriver    1.0.2d2
com.apple.driver.AGPM    100.14.15
com.apple.driver.AppleHDAHardwareConfigDriver    2.6.0f1
com.apple.driver.AppleUpstreamUserClient    3.5.13
com.apple.driver.ApplePolicyControl    3.4.35
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleMikeyDriver    2.6.0f1
com.apple.AMDRadeonX3000    1.2.0
com.apple.iokit.IOBluetoothUSBDFU    4.2.3f10
com.apple.driver.AppleHDA    2.6.0f1
com.apple.driver.AppleIntelHD3000Graphics    8.2.4
com.apple.driver.AppleHWAccess    1
com.apple.driver.AppleBacklight    170.3.5
com.apple.driver.AppleThunderboltIP    1.1.2
com.apple.driver.AppleLPC    1.7.0
com.apple.kext.AMD6000Controller    1.2.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.3f10
com.apple.driver.AppleSMCPDRC    1.0.0
com.apple.driver.AppleSMCLMU    2.0.4d1
com.apple.driver.AppleIntelSNBGraphicsFB    8.2.4
com.apple.driver.AppleMuxControl    3.4.35
com.apple.driver.SMCMotionSensor    3.0.4d1
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.AppleIntelMCEReporter    104
com.apple.driver.AppleMCCSControl    1.1.12
com.apple.driver.AppleUSBTCButtons    240.2
com.apple.driver.AppleUSBTCKeyEventDriver    240.2
com.apple.driver.AppleUSBTCKeyboard    240.2
com.apple.driver.AppleIRController    325.7
com.apple.iokit.SCSITaskUserClient    3.6.6
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.driver.XsanFilter    404
com.apple.BootCache    35
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.iokit.IOAHCIBlockStorage    2.5.1
com.apple.driver.AppleSDXC    1.5.2
com.apple.iokit.AppleBCM5701Ethernet    3.8.1b2
com.apple.driver.AppleUSBHub    666.4.0
com.apple.driver.AppleFWOHCI    4.9.9
com.apple.driver.AirPort.Brcm4331    700.20.22
com.apple.driver.AppleUSBUHCI    656.4.1
com.apple.driver.AppleUSBEHCI    660.4.0
com.apple.driver.AppleAHCIPort    3.0.0
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleACPIButtons    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    2.0
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    216.0.0
com.apple.security.quarantine    3
com.apple.nke.applicationfirewall    153
com.apple.driver.AppleIntelCPUPowerManagement    216.0.0
com.apple.kext.triggers    1.0
com.apple.iokit.IOSurface    91
com.apple.iokit.IOSerialFamily    10.0.7
com.apple.iokit.IOBluetoothFamily    4.2.3f10
com.apple.iokit.IOAcceleratorFamily    98.14
com.apple.driver.DspFuncLib    2.6.0f1
com.apple.vecLib.kext    1.0.0
com.apple.iokit.IOAudioFamily    1.9.5fc2
com.apple.kext.OSvKernDSPLib    1.14
com.apple.driver.AppleSMBusPCI    1.0.12d1
com.apple.kext.AMDSupport    1.2.0
com.apple.AppleGraphicsDeviceControl    3.4.35
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.3f10
com.apple.driver.AppleHDAController    2.6.0f1
com.apple.iokit.IOHDAFamily    2.6.0f1
com.apple.iokit.IOFireWireIP    2.2.6
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.driver.AppleGraphicsControl    3.4.35
com.apple.driver.AppleSMC    3.1.8
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.7.0d10
com.apple.driver.AppleSMBusController    1.0.11d1
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.driver.AppleThunderboltEDMSink    2.1.3
com.apple.driver.AppleThunderboltDPOutAdapter    3.1.7
com.apple.driver.AppleThunderboltDPInAdapter    3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily    3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter    1.4.5
com.apple.driver.AppleUSBMultitouch    240.9
com.apple.iokit.IOUSBHIDDriver    660.4.0
com.apple.driver.AppleUSBMergeNub    650.4.0
com.apple.driver.AppleUSBComposite    656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.6
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.driver.AppleThunderboltNHI    2.0.1
com.apple.iokit.IOThunderboltFamily    3.2.7
com.apple.iokit.IOAHCISerialATAPI    2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.6
com.apple.iokit.IOEthernetAVBController    1.0.3b4
com.apple.driver.mDNSOffloadUserClient    1.0.1b5
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IO80211Family    630.35
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOUSBUserClient    660.4.2
com.apple.driver.AppleEFINVRAM    2.0
com.apple.iokit.IOUSBFamily    675.4.0
com.apple.iokit.IOAHCIFamily    2.6.5
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.TMSafetyNet    7
com.apple.security.sandbox    278.11
com.apple.kext.AppleMatch    1.0.0d1
com.apple.iokit.IOReportFamily    23
com.apple.driver.DiskImages    371.1
com.apple.iokit.IOStorageFamily    1.9
com.apple.driver.AppleKeyStore    2
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    2.0
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.pthread    1
com.apple.kec.corecrypto    1.0
Model: MacBookPro8,2, BootROM MBP81.0047.B27, 4 processors, Intel Core i7, 2 GHz, 4 GB, SMC 1.69f4
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Graphics: AMD Radeon HD 6490M, AMD Radeon HD 6490M, PCIe, 256 MB
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x04CD, 0x46332D3130363636434C392D344742535100
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898, 785.4 MB
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 22.1

Hi there Captainmpva,
You may find the troubleshooting steps toward the bottom of the article below helpful. Please keep in mind, diagnosing a recurring kernel panic can be difficult. If you would like to avoid this process, or do not know how to perform any of the following steps, consider bringing the Mac to a Genius at an Apple Store or an Apple Authorized Service Provider for assistance. Be sure to ask that, if the drive needs reformatting or replacing, they contact you about escalating your case to a special data recovery service. If you plan to visit an Apple Retail store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
OS X: About kernel panics
http://support.apple.com/kb/ts3742
-Griff W.

What does "Internal+Server+Error {error,badarg}" mean?

What does "Internal+Server+Error {error,
badarg}" mean? I get this message on certain sites and whenever I try to install the updated versions of Adobe.

Since you have issues with Adobe installation I would suggest you to check with Adobe on this.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

What does this message icon mean on a blackberry?

What does this message icon mean on a blackberry? so when i send a text message it normally place a check mark with a small D above it. But i just got one with just a check mark, with no D above it. and i was wondering what it meant? oh and i have the blackberry tour, but it may be the same on all blackberry phones.

check means sent over network
D means delivered.
R means read.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

What does this Bridge message mean?

I have a new Mac (and Photoshop Elements 11) and when I open Bridge I get this message:
OLSException in OLS Adapter Startup
/OLS/development/main/bridge/3.2.0/build/mac/../../sdk/src/COLS.cpp#19 : 16
Should I be worried?
(I've tried using PSE Organizer and I hate it. I'd rather stick with Bridge unless I'm headed for trouble.)
What does this Bridge message mean?

Bridge came with an earlier version of PSE, PSE6 I think. The Organizer comes with PSE 9 and PSE11. Like some other PSE users, I much prefer Bridge to the Organizer. I had no trouble using Bridge with PSE9 and an older Mac. But with PSE11 and my new Mac, I started getting this message. I wonder if anyone knows what this message means, if it portends trouble for me, if there is anything I should do to correct it?
I posted this question on the Elements Forum and was told that it should be addressed on the Bridge Forum.

What does "status code error" mean when trying to sign into the APP Store?

APP Store
When trying to install a free APP (Duplicate Cleaner for iPhoto) I receive this error message "Status Code Error" and it does not let me proceed. What does this mean? and How can I proceed?

Apple’s having trouble with the iTunes Store servers right now. Wait for them to resolve the issue.
(123888)

What does disk2s2: alignment error mean?

I just got a Western Digital My Book. It was a warranty exchange. Its 4TB and came PC formatted. I reformatted for Mac.... In disk utility, selected partition, 1 partition, guild format, and applied. In console though, it gave me a disk2s2: alignment error. What does this mean?

Hello graphicgirl44,
It sounds like you are getting an error from a partition on your replacement hard drive. There can be a few things that could cause that error, so I would use the Disk Utility to attempt to repair this external drive:
Repair disk formatting information
In the list at the left, select the disk you want to repair. (Be sure to select an item that’s at the far left, and not one indented to the right.)
Click First Aid.
Click Repair Disk.
Disk Utility examines your disk’s formatting information for errors and corrects any it finds.
If Disk Utility can’t repair the disk’s formatting information, back up as much of your data as possible, partition it, reinstall OS X, then restore your backed-up data.
Partition a disk
Thank you for using Apple Support Communities.
Cheers,
Sterling

I have many photos that are visible as thumbnails in the Pictures Library, however when I try to open them in a big screen they show a back screen with an exclamation mark in a triangle. What does this exclamation mark mean ?

I can see my images in the libarary as thumbnails but when i try to edit/email some of them become Exclamation Marks in a triangle.
What does the exclamation mark mean and how to i retrieve the photo

The exclamation make is an indication that iPhoto has broken the file path to the original photo.
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

What does this popup message mean that I have been getting since the update

I got the update the other day and now when I open some of my projects this message pops up twice
"the previous selected audio interface is not available. Built in audio input and outputs of the computer will be used instead for this session".
What does this mean? How will it affect my project? or should I just ignore it. I am assuming this must be caused by the new update, since it did it the next day when I opened one of my projects. thanks

You could try to re-select your audio input and output settings under "Preferences > Audio" then save your song, quit and re-launch, and see if the message disappears. Maybe the update did something to your previous audio settings.
Hopefully this helps.
- Jay

What does this log entry mean - Cancel initiated for Exchange Producer

Is there anybody who can tell me what could this log entry mean:
--Cancel initiated for Exchange Producer: <<66800621>> DbGateway Exchange*
I'm asking because I have problem. In two physical sources (physical databases) I have two tables TABLE_1 has 60k rows TABLE_2 has 1 row. Next step these tables are "Binary Join" by BI server
so it looks like here:
-------------------- Sending query to database named OBI (id: <<66800621>>):
select T7101.SYMBOL as c1,
T7101.TABLE_1 as c2
from
TABLE_1 T7101 /* TABLE_1_ALIAS */
order by c2
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Sending query to database named OBI_BACK (id: <<66800638>>):
select T46142.KATEGORIA as c1,
T46142.FIRMANO as c2
from
TABLE_2 T46142
order by c2
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800638>>, Close Row Count = 1, Row Width = 24 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Cancel initiated for Exchange Producer: <<66800621>> DbGateway Exchange
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800621>> DbGateway Exchange, Close Row Count = 3, Row Width = 80 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800638>> DbGateway Exchange, Close Row Count = 1, Row Width = 24 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800654>> Binary Join, Close Row Count = 0, Row Width = 104 bytes
+++marek.gregor:c350000:c350006:----2010/03/03 13:30:17
-------------------- Execution Node: <<66800582>> Projection, Close Row Count = 0, Row Width = 76 bytes
As you see first is executed select from TABLE_2 (Node: <<66800638>>, Close Row Count = 1) and this is correct number of close row count
next we have
Cancel initiated for Exchange Producer:(for node with SELECT ROM TABLE_2) - and I don't know what that's mean
and after this we have
Execution Node: <<66800621>> DbGateway Exchange, Close Row Count = 3
And this is incorrect number of CloseRowCount (should be aprox. 60k)
Finally result is wrong because we have no records (inner join by BI Server doesn't work :( )
Thank you for help
Edited by: markog on Mar 3, 2010 2:03 PM

I'm wrestling with getting all of this to work myself.
Can you see the job in XGrid Admin? It sounds as if the job is failing, but I can't be sure. Clicking on the job in XGrid Admin should give you a "play by play" and tell you where it is failing.
My experience has shown me that permissions is the root cause of alot of issues, and I cannot find any clear reference on what permissions the "Podcasts" folder needs to make all of this work.
Following the documentation, the "pcastxgrid" user doesn't actually get assigned any permissions via the file system or Group membership, so I'm not sure how all of this needs to be set.
Hope this helps.

What does the -6753 error mean and what can I do about it?

I just responded to the Airport Utility request to update my new Time Capsule, and the older Time Capsule that I had set up as an extension. The update was fine for the new Capsule, but has failed for the older one, with the error message:
An error occurred while updating the firmware. -6753 OK
I've tried repeating the update, but I get the same error message. What does it mean, and what can I do to overcome this?
Thanks so much!

Do you have a Java Preference Pane in System Preferences? if not, Java isn't installed and from your description, it sounds like it may be required. You can also try running this Java Test.
Java Test
Java

What does this TJ data mean?

Hello,
I am implementing a PDF parser in Objective-C (using CoreGraphics API's) that will aid in PDF search. I know that the Tj and TJ operators are used for displaying text, and that to retrieve the text information from a page I should be looking there.
The problem comes in when there are weird operands in the TJ operator. Below is one such example:
[<1C>]TJ
0.7039 0 Td
[<1D>]TJ
What does the above highlighted red text data mean, in terms of the semantic information that it contains? During parsing, the output of the above 2 operands are the characters ˝ and ˛ respectively. Am I going to have to use the font encoding provided in the Resources dictionary of the page to decipher what these characters semantically mean?
Thanks a lot,
Michael

I assume you have a copy of ISO 32000-1:2008 available, so that you are reading what is written there first before asking.
The answer is that NOT ONLY do you need to read the font encoding information for ANY TEXT EXTRACTION, but you ALSO need to read the information from any embedded fonts for the embedded encoding information. This is especially true for TrueType fonts vs. Type 1 fonts, and CID-based fonts.
And don't forget ToUnicode tables!
There is a section in ISO 32000-1 that describes the entire process of text extraction.

What does BYE system error mean?

I am using javamail to connect to an IMAP service. Most of the time it seems fine, but once in a while I get an error message when trying to connect to the store:
javax.mail.MessagingException: * BYE System Error 42if5891749yxe.30;
nested exception is:
com.sun.mail.iap.ConnectionException: * BYE System Error 42if5891749yxe.30
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:609)
at javax.mail.Service.connect(Service.java:291)
Anyone know what the cause might be?

Other clients may not be using the same IMAP protocol messages that JavaMail does.
The error may be triggered by different behavior in JavaMail vs. other mail clients, but the
error is still occurring in the server, not in JavaMail.
It looks like you're getting the error when you try to connect. Does it occur every time
you try to connect? Does the full protocol trace provide any other useful information about
what might be going wrong? Are you using the technique described in the JavaMail FAQ
to connect to Gmail?

What does web server crash mean

What does a web server crash mean?
Does it mean that the jvm has crashed or can it be some other reason also?
Regards,
Vibha

LCDS stands for LiveCycle Data Services. If you have worked with BlazeDS then it would be easy to understand LCDS. In Flex several times it is required to do Database Interaction/Operations. At that time either we can use HttpServices, WebServices or RemoteObjects. RemoteObject gives best performance of all three as it communicates with flex client in Binary Format (aka AMF). So BlazeDS & LCDS both enable flex clients to connect with Java RemoteObjects. Beside remote objects both also support Messaging Service (real time data push).
Helpful links
http://opensource.adobe.com/wiki/display/blazeds/BlazeDS
http://www.adobe.com/products/livecycle/dataservices/
LCDS is just advance BlazeDS having some improvements over BlazeDS. See BlazeDS Vs LCDS
Hope it helps.
Thanks,
Abhinav

What does this server error mean?

Similar Messages

Maybe you are looking for