What does unable to print, cannot find time capsule mean?

What does unable to print, cannot find time capsule mean?

It is a communications error, read the posts to the right "More like this" maybe you will find some info there.

Similar Messages

  • What does the yellow light on my time capsule mean?

    The time capsule's yellow light is blinking and the time capsule will not backup

    The Time Capsule has a message for you.
    If you have Lion or Mountain Lion installed on your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click directly on the amber dot and a window will open to explain what the issue might be, along with suggested measures to remedy the problem
    If you have Leopard or Snow Leopard installed on your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click the Time Capsule
    Click Manual Setup
    Click directly on the amber dot and a window will open to explain what the issue might be, along with suggested measures to remedy the problem

  • Time Machine cannot find Time Capsule after turning auto backups off

    2010 macbook 7,1 OSX 10.6.8.  Brand new rev.4 Time Capsule 2TB (MD032LL/A) just bought yesterday. 
    Everything set up just fine and wireless is working.  Backups are working.
    Issue is that as soon as I turn the Time Machine slider to Off (I can turn it back to On at this point, doesn't matter once it's been in the Off position) in TIme Machine preferences, then try and Enter Time Machine or do a backup, it cannot find the Time Capsule (says cannot find backup volume or such).  I have to reselect the drive even though it's icon is showing right on the preferences screen.  A reboot will enable it to find the Time Capsule without my input.
    If I leave Time Machine turned on, the backups run fine and I can enter the Time Machine.  It is turning off Time Machine that triggers the issue.
    Tried the following:
      -Rebooted Time Capsule
      -Made sure Time Capsule name is less than 27 characters (it is 19)
      -Firewall is off
      -Filevaullt is off
      -Booted into Safe Mode
      -Repaired permissions
      -Trashed TIme Machine plist
      -Updated OSX
    At this point I called Applecare and they had me send them a capture of my TIme Machine data and will get back to me Monday.
    Oddly, my 10.5.8 iMac G5 2ghz is working fine with Time Machine and does not have this issue.  I can turn Time Machine off and on all I want and it can find the Time Capsule with no problem.
    Thanks for any help.

    Apple is still working on the issue but I have now noticed that I cannot VNC into my work PC anymore.  I get a "Could not connect to server, connection refused:5900"
    I am using Chicken of the VNC and it worked fine until I got the Time Capsule.  I know that 5900 is the port used for something and this sounds like it is related to the Time Capsule.
    I can't help but think this is also related to the "Cannot find backup disk" message from Time Machine.  This all sounds like the Time Capsule goofed up the works here.
    Also, I now have tons of reports in the console of it not being able to count items in a file at system/library/StartupItems.  That folder is NOT there. Which is why I assume the errors.  I have seen a few other reports and people are just restoring the file from Time Machine or making it via command line with admin.  When I go back far enough in Time Machine, the file IS there but has nothing in it.
    I asked Apple about that too and they checked a 10.6.8 computer and it had the file so not sure what is up there.  Not sure if it was 10.6.8 update or the bunch of iTunes, etc that I did after that.
    Have not restored that file yet, will wait to see what they say about the Time Capsule mess.
    Any ideas on restoring my VNC connection?

  • Wifi works but Airport Utility cannot find Time Capsule Device

    I just upgraded my home network to a MacBook Air, with Lion OS, plus a 2TB Time Capsule running the wireless.   I have my DSL modem connected directly to my Time Capsule.    I also have a USB printer attached to the time capsule.   When first configuring everything all systems were a go.  Using the Airport utility in my Mac I was easily able to find and configure my Time Capsule.   I was also able to print wirelessly from my Mac to the USB printer.    All working as advertised.  
    However, after letting my computer go into sleep mode or sit for an extended period (more than an hour) the whole system blows up.    I am still able to access the interent through the wifi, however the Airport utility in my Mac no longer can see the Time Capsule, and my wireless printer says it is no longer connected.    The only way I have found to rectify the situation is to reboot the entire system (Mac, Time Capsule and Printer).   This is effective in returning the system back to normal, however this is not what I had in mind for my new Mac based wireless system.    

    I just upgraded my home network to a MacBook Air, with Lion OS, plus a 2TB Time Capsule running the wireless.   I have my DSL modem connected directly to my Time Capsule.    I also have a USB printer attached to the time capsule.   When first configuring everything all systems were a go.  Using the Airport utility in my Mac I was easily able to find and configure my Time Capsule.   I was also able to print wirelessly from my Mac to the USB printer.    All working as advertised.  
    However, after letting my computer go into sleep mode or sit for an extended period (more than an hour) the whole system blows up.    I am still able to access the interent through the wifi, however the Airport utility in my Mac no longer can see the Time Capsule, and my wireless printer says it is no longer connected.    The only way I have found to rectify the situation is to reboot the entire system (Mac, Time Capsule and Printer).   This is effective in returning the system back to normal, however this is not what I had in mind for my new Mac based wireless system.    

  • Airport utility cannot find time capsule

    Hi
    I had set up time capsule  to work with airport facility ...it was working and then  I tried to  set it up for a printer  ...now it it wont  find  timecapsule.... The airport facility will not let me in to try to make changes....
    I am running on Lion and have done all the latest updates  
    Thanks

    Do the setup in isolation..
    Plug the TC directly into the Mac..
    Turn off any airport connection so you only have the TC plugged in ethernet to LAN port <->
    If the airport utility still cannot find the TC.. reset it to factory.
    Then set the TC into bridge and do the wireless setup..
    update the TC then plug it back into the router..
    All setups should be done by ethernet all the time.

  • Airport Utility cannot find time capsule after new network

    I created a new wireless network from my wireless router and then my time capsule started blinking yellow and airport utility can no longer find it. What can I do to fix this?

    patr18 wrote:
    I created a new wireless network from my wireless router and then my time capsule started blinking yellow and airport utility can no longer find it. What can I do to fix this?
    If you can connect temporarily to your Time Capsule with an Ethernet cable, AirPort Utility can probably see it and explain the problem.

  • Cannot find time capsule, cannot back up

    My time capsule will not back up. The message is that "the backup disk is not available". When I go to airport utility, it cannot find the time capsule. I cannot "connect to backup volume" if I try to open time machine. I have power cycled the router I'm connected to as well as the time capsule.
    I am running OS 10.6.8. I just updated the firmware for my 1TB time capsule, but it stopped connecting before that.
    Any help?

    If you are using SL go back to 7.5.2 firmware.. there is no use to you have latest firmware.. it is much worse and adds nothing to SL. it was to help lion and failed miserably.
    If you keep having the issue.. plug the TC into the Macbook.. with no other connections but the ethernet to LAN port of the TC. Turn off airport in the Macbook. Press and hold the reset for 10sec until the LED flashes rapidly .. then rename the TC and wireless.. use short names. no spaces.. pure alphanumeric.. (which is more for SMB issues true enough).
    Fix and lock the wireless channels.. fix the wireless security to WPA2 Personal with passkey of 8-12 characters pure alphanumeric.
    The TC disk should have no issues now but if you do, go to the file sharing page and turn on the guest account and give read and write access.. Still got issues then the hard disk could have failed.. look at the log.

  • Airport utility cannot find time capsule unless I reboot each time I need to back up. Use snow leopard

    Why do I have to reboot the time capsule every time that time machine calls for a back-up?

    Constant amber LED is nothing to do with network.. it actually is showing the TC is actually got a bad power supply or the disk is dead.
    Power it off.. and do a full factory reset.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Then you can see if it boots beyond the solid amber.. if not let it cool right down for several hours and try again.
    What model exactly is it??

  • Cannot find time capsule backup to restore

    Hello - I have a MacMini (Intel Core 2 duo) runing OS 10.6.7.   I used Time Machine to backup my data daily to a remote Time Capsule on my local network;  I should also say at this point that I use Time Capsule to backup 4 machines in total.    The hard drive crashed, and needed to be replaced.   Now I am trying to restore my data to my computer.  However, neither migration assistant nor time capsule can find the correct image (sparsebundle) to be mounted - for example, when I "Choose Time Machine Disk to Browse" no disks show up. Migration Assistant behaved a little differently, showing me 2 (out of 4) Time Capsule backups, but not the one relevant for this particular computer. 
    I know that backups have been performed, and I can manualy mount the specific Time Machine Backup through the finder - at which point I can "see" folders named "yyyy-mm-dd-xxxxxx,"  just as interesting is a file "yyyy-mm-dd-xxxxxxx.inProgress" - and which appears to be the latest date at which the folder was accessed.  I have attached a screen shot of the contents of the folder.
    Any thoughts?   I really just need to restore the most recent backup, the rest are not necessary past this point.
    Thanks!

    Hi,
    I just ran into the same problem, neither the Migration Assistant nor "Restore from Backup" from the 10.5 Install DVD would find a valid backup on my Time Capsule (which kinda renders it useless).
    After some googling and trial and error I found a workaround using Terminal. I don't know why mounting the sparebundle image with Disk Utility wouldn't work, but it isn't available when your computer crashed anyway... So here is my method:
    -Boot from the System DVD, choose the language
    (-Goto Utilities and start the Disk Utility and reformat your drive, if on Intel check that you partition it with GUID, NOT Apple Partition Scheme NOR MBR, restart from DVD) only if something went wrong with your disk like in my case
    -Goto Utilities and start Terminal
    -In Terminal first make a directory for the mount, type: mkdir /Volumes/MyBackup
    -Then mount the Time Capsule and link it to the folder you created, type: mount -t afp afp://myuser:mypassword@IPAdressOfMyTimecapsule/VolumeWhereMyBackupIs /Volume/MyBackup
    -The AFP-Volume is now mounted, but you can't see anywhere.
    -Quit Terminal, this will bring you back to the 10.5 Installer.
    -Goto Utilities and choose "Restore System From Backup"
    -The Dialog will ask you for a Backup Source. You should now see your Time Capsule and an already mounted Time Machine Volume at the location you specified in Terminal.
    -Select the Time Machine Volume and press Continue, it'll take a while you show you all the backups, choose the one you want, choose a destination, drink tea.

  • HT1178 scan cannot find time capsule for new set up

    I have connected airport time capsule with ethernet cable direct to the computer, but the scan for the new time capsule comes up with nothing.
    Can anyone suggest a way to scan manually when manual scan button is greyed out.
    Thanks

    Unfortunately, if you check the Specification page for the System Requirements for the new Time Capsule, it reads like this:
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
         or
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
    http://www.apple.com/airport-time-capsule/specs/
    So, if you have a new Time Capsule, you will not be able to use 10.6.8 to set it up and administer it.
    If you have an iPhone or iPad handy, that could be used to set up the new Time Capsule.
    If not, then you will need to upgrade your Mac to at least Lion (10.7.5) or higher.

  • What does "Initializer for 'source': unrecognized compile-time directive" mean

    Hello I am currently making a splash page for an app I am making and when i put all the code to gether it says "Initializer for 'source': unrecognized compile-time directive" I am not sure what I am doing wrong.
    Below is the code:
    <fx:Declarations>
                        <s:SplashScreenImageSource
                                        source="@embed('assets/TheSolarSystemSplashPage.jpg')"/>
    </fx:Declarations>
    I am having trouble on the 3rd line.
    Thanks for the help.

    as3 is case sensitive.
    try
    @embed -> @Embed

  • Airport Utility cannot find Time Capsule and has a blinking amber light

    I have a wireless router for my Wifi set up through AT&T (2WIRE). I am trying to add my TC to my existing network rather than establishing a new Wifi network with it. When I try to plug in my TC to set it up, Airport Utility cannot even find it. My TC has a blinking amber light also. I have tried reseting my TC, resetting my router, unplugging my router, unplugging my TC... I have the latest version of Air Port utility (6.2 (620.33)).

    Connect the TC LAN port to the computer by ethernet.
    If necessary do a reset of the TC so it shows up.
    Put the TC into bridge mode.
    Go to the wireless page, and set wireless to off.
    Update the TC.. disconnect from the PC and plug WAN port to LAN port of the 2wire with ethernet.
    The TC will now exist as a client in your network without creating a second wireless network.
    You should also be able to access the TC via the airport utility.
    I do think you should use the TC wireless since the 2wire does not provide a signal at 5ghz which is much faster than 2.4ghz.
    So I do suggest you in fact do use the wireless but it is up to you.
    It makes no difference having two wireless networks if they both connect back to the same router.
    Do not use the "Join a wireless network" method.. ie no cable between the TC and 2wire.. that is poorest possible setup.

  • Trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple

    trying to add HP Photosmart C4280 via airport express. "Add Printer" correctly finds printer as Bonjour kind but "add Printer" cannot find printer software from Apple (although it says that the software is available from Apple)

    Rfh723-
    You are technically way ahead of me, so I can't argue with what you did.
    How about an even simpler WiFi network consisting of only the AirPort connected by an Ethernet cable to the printer?  If the iPad still can't find the printer when connected to this network, then something is broken!
    (Also try a different Ethernet cable.)
    Fred

  • I want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help

    want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please

    If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there. 
    searching the internet i found a link to upgrtade to 10.7
    The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
    As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
    Regards.

  • What does it take to make "find me" work

    what does it take to make "find me" work on a mac mini.
    there are 3 users. Would I need to make an apple ID for the administrator.
    If it gets stolen, I can track it down.

    Yes, system preferences>iCloud> only thing shows up is find my iphone.
    I think I found the problem. even though it only list >>>>iPhone<<<<, it still found my "laptop" when I clicked on it.
    As long as I have wifi turned on is the trick I think.
    Thanks so much!!!

Maybe you are looking for