What does "untrusted" network connection mean?

If your airport comes on with full service but has an "untrusted" network connection what does that mean?

I believe the "untrusted" network your are referring to means that this type of network is open or unsecured. In essence, anything you send/receive over an untrusted network could be see by anyone.
For WiFi, we use encryption to "trust" or secure a wireless network connection. The most common encryption used today are WEP, WPA & WPA2. (ref: http://docs.info.apple.com/article.html?artnum=107921)

Similar Messages

  • What does system network password mean.

    I have just updated to Mountain Lion.  I had to change my Apple I.D. password.  Most things seem to have gone well.
    I now have an intercept.  It says, Enter your system Network Password.  What is that?
    It is not my Apple password,  It is not my computer password.  What is it?  Where do I find it?

    Sounds like it is asking for a password to join a wifi network.

  • What does "unable to connect to server" mean on my Iphone 4S when trying to access Mail?

    What does "unable to connect to server" mean on my Iphone 4S when trying to access mail?

    Ask your email provider for the correct settings to use to set it up on your phone.

  • What does Transparent Networking Substrate (TNS) mean ?

    Hello,
    what does Transparent Networking Substrate (TNS) mean?
    I searched several Oracle documentations but couldn't find a plain explanation!
    Thanks
    Axel

    In addition to the glossary definition...
    For what most people care about, TNS is a layer that transparently allows you to use a variety of different methods to resolve database aliases. You can configure a tnsnames.ora file, you can set up Oracle Names, an LDAP directory, or you can use host names.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • What does "update carrier settings" Mean?  Settings for what?

    What does "update carrier settings" Mean?  Settings for what?

    It means just what it says. Carrier settings are the settings the carrier installs on the phone to connect it properly to their network. Periodically, carriers push updates to those settings. You should accept them.

  • What does this message icon mean on a blackberry​?

    What does this message icon mean on a blackberry? so when i send a text message it normally place a check mark with a small D above it. But i just got one with just a check mark, with no D above it. and i was wondering what it meant? oh and i have the blackberry tour, but it may be the same on all blackberry phones.

    check means sent over network
    D means delivered.
    R means read.
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • What does the dotted circle mean?

    When connecting itouch to itunes, what does the dotted circle mean next to a song? Thanks for the help.

    Hi pfn,
    From an earlier post on this topic - this may work for you - it's worth a try:
    First go to the 'On This iPad/iPod/iPhone' section and note all the tracks that have dotted circles.
    In the 'Music' section, un-check/de-select all the tunes noted 
    Apply and sync the changes. 
    Once that completes re-check/re-select the same tunes just un-checked/de-selected in the 'Music' section.
    Apply and sync the changes again
    Go back into the 'On This iPad/iPod/iPhone' section
    Hopefully all the dotted circles will be gone and all the tracks can be played
    See if this helps!
    Cheers,
    GB

  • What does error code -50 mean?

    please help me what does error code -50 mean??

    See Here
    Resolve Error Messages
    http://support.apple.com/kb/ts1275
    Try temporarily disabling your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • What does "cannot allocate memory" mean?

    what does "cannot allocate memory" mean?
    I get this message when I tried to open an app that requires the internet.
    I have Wi-fi connection but the apps kept telling me "cannot connect to the internet"
    What does this mean?

    Check your "http proxy" settings. You may try to use it with "auto".

  • HT3529 what does 2127 error message mean?

    what does 2127 error message mean when trying to send a text??

    "...usually the 2127 invalid destination indicates that you should check your number and try again.  It could be if number sending to has text blocked, a network issue, or not sending to a full 10 digit phone number...if you are sending text to a contact in your phone make sure contact saved has all 10 digits with area code save and also in contact make sure saved as a mobile number and not a home number..."

  • What does error code -5016 mean?

    What does error code -5016 mean?  My computer spits out my DVD or CD.

    At random places in my packages, I randomly (not always) get this general netwrok error (I am including the first line just to show the line right above the error line):
    Information: 0x400490F4 at Data Flow Task - my task 1, Lookup - my lookup task 1 [234]: component "Lookup - my lookup task 1" (234) has cached 13312 rows. Error: 0xC0202009 at Data Flow Task - my task 1, Lookup - my lookup task 1 [234]: An OLE DB error has occurred. Error code: 0x80004005 An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionRead (WrapperRead()).]General network error. Check your network documentation." Error: 0xC020824E at Data Flow Task - my task 1, Lookup - my lookup task 1 [234]: OLE DB error occurred while populating internal cache. Check SQLCommand and SqlCommandParam properties. Error: 0xC004701A at Data Flow Task - my task 1, DTS.Pipeline: component "Lookup - my lookup task 1" (234) failed the pre-execute phase and returned error code 0xC020824E.
    FYI - I am using June CTP.
    thanks,
    Nitesh

  • What does error code 3149 mean?

    what does error code 3149 mean on i pod touch

    Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • What does error code 0x80004005 mean?

    What does error code 0x80004005 mean?

    At random places in my packages, I randomly (not always) get this general netwrok error (I am including the first line just to show the line right above the error line):
    Information: 0x400490F4 at Data Flow Task - my task 1, Lookup - my lookup task 1 [234]: component "Lookup - my lookup task 1" (234) has cached 13312 rows. Error: 0xC0202009 at Data Flow Task - my task 1, Lookup - my lookup task 1 [234]: An OLE DB error has occurred. Error code: 0x80004005 An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionRead (WrapperRead()).]General network error. Check your network documentation." Error: 0xC020824E at Data Flow Task - my task 1, Lookup - my lookup task 1 [234]: OLE DB error occurred while populating internal cache. Check SQLCommand and SqlCommandParam properties. Error: 0xC004701A at Data Flow Task - my task 1, DTS.Pipeline: component "Lookup - my lookup task 1" (234) failed the pre-execute phase and returned error code 0xC020824E.
    FYI - I am using June CTP.
    thanks,
    Nitesh

  • What does 'shared key authentication' mean?

    What does 'Shared Key Authentication' mean?

    Shared Key Authentication (SKA) is a process by which a computer can gain access to a wireless network that uses the Wired Equivalent Privacy (WEP) protocol. With SKA, a computer equipped with a wireless modem can fully access any WEP network and exchange encrypted or unencrypted data.

  • What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

    Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
    Product and Software: This article applies to AP-105.
    The root cause of this error is that the AP cannot perform a code upgrade.
    Scenario 1
    Check the ArubaOS code.
    The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
    If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
    Scenario 2
    If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
    Scenario 3
    The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
    apboot> setenv ipaddr <ip address>
    apboot> setenv netmask <netmask>
    apboot> setenv gatewayip <ip address of the gateway>
    apboot> setenv master <ip address of the master>
    apboot> setenv serverip <ip address of the TFTP server>
    apboot> setenv bootcmd tftp
    apboot> save
    apboot> boot
    Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

    I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
    Built: 2011-01-07 at 13:42:04Model: AP-10x
    CPU: AR7161 revision: A2
    Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
    DRAM: 128 MB
    POST1: passed
    Copy: done
    Flash: 16 MB
    PCI: scanning bus 0 ...
    dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
    00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
    01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
    Net: eth0
    Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
    Checking image @ 0xbf100000
    Invalid image format version: 0xffffffff
    Checking image @ 0xbf800000
    Invalid image format version: 0xffffffff
    eth0 up: 1 Gb/s full duplex
    DHCP broadcast 1
    DHCP IP address: 192.168.x.xx
    DHCP subnet mask: 255.255.255.0
    DHCP def gateway: 192.168.x.xx
    DHCP DNS server: 192.168.x.xx
    DHCP DNS domain: xx
    ADP multicast 1
    ADP broadcast 1
    ADP multicast 2
    checksum bad
    ADP broadcast 2
    checksum bad
    ADP multicast 3
    checksum bad
    checksum bad
    checksum badRetry count exceeded
    DNS request 1 for aruba-master to 192.168.x.xx
    checksum bad
    checksum bad
    checksum bad
    T Using eth0 device
    TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
    Filename 'mips32.ari'.
    Load address: 0x2000000
    Loading: checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    checksum bad
    T checksum bad
    checksum bad
    T T checksum bad
    T checksum bad
    checksum bad
    T T T
    Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplex
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum badARP Retry count exceeded; starting again
    eth0 up: 1 Gb/s full duplexchecksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad
    checksum bad  ThanKs :)
     

Maybe you are looking for