What does version 1.1.2 do for your ipod

wat does it do peoples wat are the problems with it

I'm not quite sure how to answer what it does; that question's a bit vague. Regarding what issues it has; no major issues that I know of, at least none that I've experienced first hand. I'm one of those that is having the 1.2 firmware problems with my 5G, but upon reverting to 1.1.2 all problems have cleared up. 1.1.2 seems pretty benign.
-Chris

Similar Messages

What does the Download and Update do to your iPod?

I've always been worried if it was going to change my iPod any.
If this matters:
I have bought all my music through Apple. %100 Apple.

The download download the firmware update file to yur computer. The Update actually updates the firmware on the iPod. Yu can download the update for later installation.
Music is not included in the backup that iTunes makes during each sync and at the begining of a firmware update. Therefore, you nned to ensure that the music is in your iTunes library before the update. If you are in the USA you can redownoad music (and apps an dsome other stuff too) via iCloud beta:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
When iCloud goes out of beta you should be able to do that i other countries too.

TS1372 what does it mean when you cant restore your ipod nano and it gives you the code 1433 ?

How do i fix it ?

Some users have been able to resolve this issue by simply closing iTunes and re-opening it. It might even be necessary to reboot your PC.
Otherwise, reset the Nano with it still connected to a high powered USB 2.0 port on your PC and then try to restore it again.
B-rock

What current version of safari is recommended for Os 10.5.8?

What current version of safari is recommended for Os 10.5.8?

None. The browser installed with 10.5.8 is the last for that version of OS X. To upgrade Safari you need to upgrade OS X:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
    OS X Mavericks- System Requirements
    Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

What does the local-address element stand for here?

Please se the following Coherence Extend Proxy Configuration file:
What does the <local-address> element stand for? Does it define that only the local clients (local with server proxy) can be accepted?
<local-address>
    <address>localhost</address>
    <port>9099</port>
</local-address>
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
    <cache-mapping>
      <cache-name>dist-*</cache-name>
      <scheme-name>dist-default</scheme-name>
    </cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
    <distributed-scheme>
      <scheme-name>dist-default</scheme-name>
      <lease-granularity>member</lease-granularity>
      <backing-map-scheme>
        <local-scheme/>
      </backing-map-scheme>
      <autostart>true</autostart>
    </distributed-scheme>
    <proxy-scheme>
      <service-name>ExtendTcpProxyService</service-name>
      <thread-count>5</thread-count>
      <acceptor-config>
        <tcp-acceptor>
          <local-address>
            <address>localhost</address>
            <port>9099</port>
          </local-address>
        </tcp-acceptor>
      </acceptor-config>
      <autostart>true</autostart>
    </proxy-scheme>
</caching-schemes>
</cache-config>

I think you not got the real meaning here.
<local-address> element is used to specify a local address (IP or DNS name) and port that the TCP/IP ServerSocket (opened by the connection acceptor) will listen on. It's not a filter used to confine the client IP address.
For example, the following will instruct the connection acceptor to bind the TCP/IP ServerSocket to 192.168.0.2:9099:
<local-address>
<address>192.168.0.2</address>
<port>9099</port>
<reusable>true</reusable>
</local-address>

What does the return code 20 stands for in the Transport request log

Hi,
When we have retreived the Transport request log by using the Unix command, we have got return code 20.
Please let us know what does the return code 20 stands for and under what scenerios I will get the return code 20.
Thanks & Regards,
Madhuri.

chk the last return code in this link
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e26c4eb711d182bf0000e829fbfe/content.htm

What does the symbol ".." stand for?

[root@localhost jeff]$ls -al
total 64
drwx------ 3 jeff jeff 4096 2008-01-02 20:20 .
drwxr-x-x 6 root root 4096 2008-01-02 20:30 ..
I want to know: what does the symbol ".." stand for?

But why does it display the parent directory here? I
just to list the current directory!It's a shortcut to parent directory. Otherwise how do you quickly go back one level of directory? Do you prefer to always enter the full path ?

My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

My iPod does not update it self in iTunes. I click on the "update the latest version for your iPod" and it fails. Please help me.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

What does "into corresponding field" addition used for?

What does "into corresponding field" addition used for?. I have seen them in open sql statements. Please explain?

before knowing this you have to know how u write select in ABAP....
think you have a str./internal table itab with this strucutre:
data: begin of itab occurs 0,
         vbeln like vbak-vbeln,
         posnr like vbap-posnr,
         netwrt like vbap-netwrt,
       end of itab.
u have to follow the same order in the select statement...
select vbeln posnr netwrt
from vbap
into table itab
where......
Think that u had some concern and coudnt write a select in same order then u write it like this...
Performance wise its very bad...so ppl generally try to eliminate it..
select netwrt posnr vbeln
from vbap
into corresponding field of table itab
where......
Award points if helpful

What does 'include render files' option mean for when I duplicate a project. I deselected it and the duplicated file is very slow so maybe this has affected it. It's a shame cause original project is deleted. Have I lost the rendered files? Thanks

What does 'include render files' option mean for when I duplicate a project. I deselected it and the duplicated file is very slow so maybe this has affected it. It's a shame cause original project is deleted. Have I lost the rendered files? Thanks

Yes, if you duplicate without the render files and delete the original project you lose the render files. But render files get recreated - automatically if you have it set in the preferences (which is the default option). It just takes time.

I just upgrade to lion on my iMac and also did the switch to iCloud and Paralle destop doest not what to open anymore .It says reactivate your mac and try again. What should I do now ? thanks for your help. Regards Eric

I just upgrade to lion on my iMac and also did the switch to iCloud and Paralle destop doest not what to open anymore .It says reactivate your mac and try again.
What should I do now ?
thanks for your help.
Regards
Eric

There's no need to go to the store if you don't want to. You can purchase and download the new version from the Parallels web site. In fact if you want to try it out, I believe you can do the download and get a two week trial version. Later you can purchase the serial number to make it official.
I cannot be certain about your data, but I did not lose anything when I updated to Lion and faced a similar situation.
Best of luck.

What is the factory setting pin code for my ipod touch?

im looking to make a purchase in app on my ipod touch and i need to switch off the restrictions under general settings. in order to this i need the pin code which is 4 digits. this must be factory set as ive not set it previously.
thanks

A: what is the factory setting pin code for my ipod touch?

There is no default setting. You have to set the passcodes. If you cannot remember them, then see:
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
Verify that you are using the latest version of iTunes before attempting to update.
Connect your device to your computer.
Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
Select the Summary tab.
Select the Restore option.
When prompted to back up your settings before restoring, select the Back Up option (see in the image below). If you have just backed up the device, it is not necessary to create another.
Select the Restore option when iTunes prompts you (as long as you've backed up, you should not have to worry about restoring your iOS device).
When the restore process has completed, the device restarts and displays the Apple logo while starting up:
After... [Show more]
Read other 6 answers

What are the parts i will need for my ipod since my ipod screen remains completly blank white

what are the parts i will need for my ipod since my ipod screen remains completly blank white

- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

What steps do I need to take for the iPod mini to remember the last song?

What steps to I have to take for my iPod mini to remember the last song that I played from an album when I turn it on again, after I have turned it off.
Whenever I turn my iPod mini off, it seems to go back to the main menue.
Any help would be greatly appreciated.

Depends on how long you are leaving it turned off. If it's more than enough time for the iPod to go into deep sleep, then when next you turn it on, it restarts with the Apple logo and returns to the main menu.
If it's only for a few hours that you leave it turned off, then the iPod should resume from the point at which you left it.
I don't know for sure whether the "remember playback position" in iTunes works after the iPod has been in deep sleep.

HT5848 I am in France and I can't find the iTunes Radio player in the music playier. Is it a French specification and if not what do I do wrong? Thanks for your help!

In France with the new IOS7 I don't find the iTunes Radio in the music player.
Is it a French specification or what do I do wrong? Thanks for your help

Jamira4 wrote:
In France with the new IOS7 I don't find the iTunes Radio in the music player.
It is currently only available in the USA.

What does version 1.1.2 do for your ipod

Similar Messages

Maybe you are looking for