What downloads are needed to start using Java?

I just need to know what I have to do to
started programing with java. I want to use
it in web browsers. Any help would be appreciated.
Thanks!

You want to make java applets for webpages? My guess would just be the latest Java SDK.
http://java.sun.com/j2se/1.3/jre/

Similar Messages

Kichat: FAQ 1 - What do I need to start in iChat ? (Replacement)

Original
kichat: FAQ 1 - What do I need to start in iChat ?
Answers to very basic questions of getting started in iChat AV 2.1. (Edit 5/5/05) It mostly goes for iChat 3 as well.
Redrafted 30/03/2007
Glossary
Audio is sound only chats (called Talk on AIM )
Video is Sound and Pictures (where cameras and microphones allow)
account name is synomonous (the same as) with screen name
Basic Facts
iChat AV 2.0 did come with Panther and at this point is free. (Upgrade to 2.1)
iChat 3 comes with Tiger and supports Multiple person chats
You can chat to AIM based services as long as one of you has a camera. (Currently audio only chats are not possible). Windows users have to running one of the XP incarnations and AIM 5.5 at least to Video.
What you Need
OS 10.3.x for iChat AV 2.1
iChat ver 2.0 or 2.1 (Now Panther only)
OS 10.4.x for iChat 3.x
DV input device (camera or DV converter for analogue cameras) See also Exceptions further down.
Free Firewire port (not daisy chained)
An AIM (AOL & Netscape count) or @mac.com account/screen name. (Stick to passwords of 16 characters or less without Special Characters).
How to make Exceptions Work
Slow Mac or USB cam prior 10.4.9 or non USB Video class cam
1) Slow (G3/500 and less) computers and those with USB cams need this utility
iChatUSBCam which enables slower machines to connect and enables USB cameras to be seen by iChat. (lower limit 350Mghz)
2) Analogue cameras can be made to work with a converter like this one.
Hollywood Dazzle DV_Bridge<(not home page of Manufacturer but has pics).
<blockquote style="width: 80%; margin: auto; padding: 5px; border: 1px solid #000; background: #efefef;">10.4.9 now allows for USB cams of the USB Video Class (UVC). Other will still need the iChatUSBCam utility
If your Exception seems to be Networking or Router based read this FAQ
Essential Reading
Although you don't need an understanding of Firewalls or Network Translation on Routers some backgound reading can help.
This link Apple Doc number 93208 can help with basic settings in the Mac's Firewall and the Router's settings.
Note 1 should read:
1. All iChat AV traffic is UDP except for ports 5190 and 5298, which need to be open for both TCP and UDP; and 5220, 5222, which need to be open for TCP only.
The page contains a link to a list of Routers that will work "Out-of-the-Box".
If your's does not appear, pay attention to Note 4, near the bottom, because you are going to have to search for more info about your router (or do that un-Mac thing and read the manual).
I found this ADSL GUIDE site useful for getting extra info by users of routers on DSL.
This site has an Apple Related Area in the Technical section which I have linked you to. It is searchable.
PortForward.com Has pics and instructions for many modems and routers for the Port Forward method of opening ports.
How to Start
After getting your account name, start iChat.
It will lead you through a assistant. Ryan's Pics and instructions on this bit
If you launched it before and are starting again make sure iChat is off line.
Go to Preferences in the iChat Menu item. Open the Acounts icon.
Select the type of account it is.
Type in your name (without the @mac .com suffix) and use tab key to enter password.
Server Options button (Server Settings tab in iChat 3.x) should be live at this point. Check that it reads login.oscar.aol.com and the port is 5190.
Close Server Options and hit enter.
iChat should now log on.
In iChat 3.x there is a check box in the accounts Information tab that says "Use this Account" to be checked to activate it.
Buddies
You now have to enter Buddies into the Buddies list
Use the "+" button at the bottom of the Buddy list window.
Add New Person or from your address book if you have recorded Buddies account names there.
The first account names you should add are the test accounts shown In Contact Testers or the FAQ here.
2:59 PM Friday; March 30, 2007

Original
kichat: FAQ 1 - What do I need to start in iChat ?
Answers to very basic questions of getting started in iChat AV 2.1. (Edit 5/5/05) It mostly goes for iChat 3 as well.
Redrafted 30/03/2007
Glossary
Audio is sound only chats (called Talk on AIM )
Video is Sound and Pictures (where cameras and microphones allow)
account name is synomonous (the same as) with screen name
Basic Facts
iChat AV 2.0 did come with Panther and at this point is free. (Upgrade to 2.1)
iChat 3 comes with Tiger and supports Multiple person chats
You can chat to AIM based services as long as one of you has a camera. (Currently audio only chats are not possible). Windows users have to running one of the XP incarnations and AIM 5.5 at least to Video.
What you Need
OS 10.3.x for iChat AV 2.1
iChat ver 2.0 or 2.1 (Now Panther only)
OS 10.4.x for iChat 3.x
DV input device (camera or DV converter for analogue cameras) See also Exceptions further down.
Free Firewire port (not daisy chained)
An AIM (AOL & Netscape count) or @mac.com account/screen name. (Stick to passwords of 16 characters or less without Special Characters).
How to make Exceptions Work
Slow Mac or USB cam prior 10.4.9 or non USB Video class cam
1) Slow (G3/500 and less) computers and those with USB cams need this utility
iChatUSBCam which enables slower machines to connect and enables USB cameras to be seen by iChat. (lower limit 350Mghz)
2) Analogue cameras can be made to work with a converter like this one.
Hollywood Dazzle DV_Bridge<(not home page of Manufacturer but has pics).<br>
10.4.9 now allows for USB cams of the USB Video Class (UVC). Other will still need the iChatUSBCam utility
If your Exception seems to be Networking or Router based read this FAQ
Essential Reading
Although you don't need an understanding of Firewalls or Network Translation on Routers some backgound reading can help.
This link Apple Doc number 93208 can help with basic settings in the Mac's Firewall and the Router's settings.
Note 1 should read:
1. All iChat AV traffic is UDP except for ports 5190 and 5298, which need to be open for both TCP and UDP; and 5220, 5222, which need to be open for TCP only.
The page contains a link to a list of Routers that will work "Out-of-the-Box".
If your's does not appear, pay attention to Note 4, near the bottom, because you are going to have to search for more info about your router (or do that un-Mac thing and read the manual).
I found this ADSL GUIDE site useful for getting extra info by users of routers on DSL.
This site has an Apple Related Area in the Technical section which I have linked you to. It is searchable.
PortForward.com Has pics and instructions for many modems and routers for the Port Forward method of opening ports.
How to Start
After getting your account name, start iChat.
It will lead you through a assistant. Ryan's Pics and instructions on this bit
If you launched it before and are starting again make sure iChat is off line.
Go to Preferences in the iChat Menu item. Open the Acounts icon.
Select the type of account it is.
Type in your name (without the @mac .com suffix) and use tab key to enter password.
Server Options button (Server Settings tab in iChat 3.x) should be live at this point. Check that it reads login.oscar.aol.com and the port is 5190.
Close Server Options and hit enter.
iChat should now log on.
In iChat 3.x there is a check box in the accounts Information tab that says "Use this Account" to be checked to activate it.
Buddies
You now have to enter Buddies into the Buddies list
Use the "+" button at the bottom of the Buddy list window.
Add New Person or from your address book if you have recorded Buddies account names there.
The first account names you should add are the test accounts shown In Contact Testers or the FAQ here.
9:10 PM Wednesday; April 4, 2007

What commands are needed to configure authentication?

I'm running the JaasAcn Sample from a DOS prompt on a Win XP client and am getting 'authentication failed'. My Active Directory Realm is AD.COURSEWIZARD.COM and the KDC FQDN is ad.ad.coursewizard.com. It succeeds when I run the 'Sample' locally on the AD server. If I set 'isInitiator=false' in jaas.conf, it succeeds no matter what I enter for username & password. It seems that I need to configure an SPN.
When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
Do I have to also use the 'ktpass' command, even though I'm using a Win client?
If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
What commands are needed in order to configure the server, and client, to authenticate successfully?
Cheers

Sorry, I haven't seen a nice JGSS for Windows guide yet.
Back to your questions:
1. When setting an SPN, are you declaring that a particular AD user account is associated with a remote service that will be requesting authentication?
IMHO, setspn creates a service-like alias for a normal AD account, so that GSS style server program can use it as a NT_HOSTBASED_SERVICE name.
2. Do I have to also use the 'ktpass' command, even though I'm using a Win client?
ktpass is used at the server side, what you use at client side is unrelated.
3. If I use ktpass, but am just testing with a PC on the Inet, should I just use my IP address for domain since I don't have a FQDN?
Porbably not. Anyway, AD works fine with a DNS. If you haven't one, config the AD server as a DNS server.
4. Do I need to move the keytab file, created by ktpass, to the client and configure it to use it?
No, keytab is used at server side. The client side uses the native credentials cached in LSA after you login to Windows as an AD account.
5. Does the ADS need to have a krb5.conf or krb5.init file? I don't see one under '../drivers/etc/'.
Yes, Java needs the file for both client and server JGSS programs. Normally it should be inside the WINDOWS directory. Somethign weird woun happen if you uses Terminal Services or else. Add -Dsun.security.krb5.debug=true to the Java command line will show you when Java tries to look for this file.
6. What commands are needed in order to configure the server, and client, to authenticate successfully?
You need setspn.exe and ktpass.exe on the server to create the SPN and the keytab file. No tools are necessary on the client side, but MS's kerbtray.exe and klist.exe (attention: MS's klist, not Java's) are nice. BTW, a nice network sniffer (say, Wireshark) is also useful.
I'm not an expert on all these questions, but I cannott resist the temptation to give an answer to each of them.

I will starting afresh website in my iWeb, it shows only the head or the command line and the command new website is inactive - what do I need to start over

Help........
I will starting afresh website in my iWeb, when I start the program it only shows the head or the command line and the command new website is inactive - what do I need to start over - what have I done wrong

Don't quite understand what you mean, but it says at the bottom that you are still using iWeb 08 so depending on what OSX you are running, you might consider upgrading to iWeb 09. This works with Lion, Mountain Lion and Mavericks.
Apple no longer sells iWeb so if you decide to upgrade, then you'll need to purchase iWeb by going to Amazon and buying the iLife 09 or 11 boxed sets, both of which contain iWeb 09.
Install this on your Mac and it might solve your problems, or just ditch iWeb and start again with one of the newer programmes out there that are still being supported and updated, such as RapidWeaver, Sandvox, Freeway Pro/Express, Flux 4, WebAcapella 4 and EverWeb (http://www.everwebapp.com).

While doing ODI migration what things are needed to be setup in Topology?

While doing ODI migration what things are needed to be setup in Topology manager ?
1.Like in Toplogy in file we hive file paths.
2. In Planning we set Logical schema .
Not sure about other things.
Hoping some can can help!!!!!!!!!!!!!!!11

Lots of things are defined in the topology manager - below is a simplified list
1) Physiccal Schemas the actual connection information / details related to any technology you plan to use in your ODI integration interfaces
2) Logical schema, abstracted version of the Physical schema which allows greater flexibility ad reuse across environments
3) Contexts - how you asssociate logical and physical schemas
4) Agents - manage the execution of ODI jobs
When you talk about migration, do you mean moving ODI objects between seperate environments such as Dev and Prod? If so you will need to ensure that all the technologies you use in Dev are present in Prod. The physical layer has been set up with all the correct connection details. Your logical scemas has been set up matching your configuration in the dev environment and you have used the contexts to associate the logical and physical layers as per your dev configuration.

WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV-.

WHAT PARTS ARE NEEDED TO SHOW MY MAC 10.8.4 OVER TV….

About AirPlay Mirroring in OS X Mountain Lion
You need:
An AirPlay-enabled device such as http://store.apple.com/us/ipod/ipod-accessories/apple-tv
A suitable TV monitor
A network
HDMI cable
A compatible Mac:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Or, depending on the model Mac you intend to use: a Thunderbolt or MiniDP or DVI to HDMI adapter for a wired connection to your TV or AVR

What skills are needed to manage Exalogic?

Hi there
Please let me know if I should be directing this question to another Forum and which Forum it should be.
We are thinking of purchasing Exalogic with a view to having a private Cloud.
What skills are needed or teams in order to manage Exalogic in-house?
I've used google but not really found the answers other than a couple of Oracle docs which suggest sys admins teams, network teams, etc could all have a hand in the management as they currently exist.
However, Management are wondering if a new team needs to be formed and what skills that team should have.
As we already have Exadata under the DBA team they are wondering if the skills the DBAs have will also apply for Exalogic.
Thanks.

Others are welcome to jump in!
Thanks and stay tuned to for results next week<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/technology">The Technology HomePage</a> for tally and scores

How do I determine what xtras are needed?

From the searching I have done it appears that xtras equired are mostly trial-and-error.
Is there an efficient way to determine what xtras are needed for each lindividual movie?
My programs are divided into a series of sequential movies. At the end of each movie
there is a goto statement to launch the next movie. Does that require me to determine
xtras for each separate movie?
In a perfect world there would be a way for Director to search a folder for and present an aggregate list of all xtras required for that set of movies.
If no such method exists, what is the recommended hunt and peck system?

Thanks for the response, rduane. But I refer to the procedures as a bit random for the reasons you mentioned in your explanation. For example, you stated that, "Director will normally add all of the Xtras that you need to each movie as you build it". And, yes, I know that it does add some automatically. But, if Director really does "add all of the xtras that you need to each movie as it is built", how could I ever jump to one that is missing a needed xtra? If it needs it, why wasn't it added when it was built?
So, that's the reason I mentioned "trial and error", and "hunt and peck". The system is not reliable in its handling of xtras, or which ones are needed where. I am familiar with workarounds such as going to each movie and selecting Modify>Movies>Xtras to see which ones Director has added, But that is all it tells you. It does not tell you if it has added all the xtras "needed". And when the error message comes up, it does name the missing xtra, but not which movie needs it. So, one has to go find the named xtra and copy it over to the Xtras folder.
At least, that's what I do to fix it. But I asked the question because I wanted to know if Xtras handling itself is unreliable, or if I'm doing something incorrectly.
Dewey-+

What wires are needed to connect to a projector

What wires are needed to connect a macbook to a projector

A VGA or HDMI cable (Perferably HDMI). But you need mini-displayport connectors to the specific cables.

HT1386 Switching from a pc to a Mac. What steps are needed to get my iPhone and iPad to work with my new Mac?

What steps are needed when upgrading from a pc to a Mac?

Copy everything from your old computer to your new one.

Bought an iphone 4 to a stranger and l did hard reset now l am stuck l dont know his Apple ID and password efforts of using mine from the previous iphone l had are fruitless so l am stuck on that page. please guys help me l need to start using my phone.

I bought an iphone 4S from somebody at the airport and the person was stranded. but l forgot to ask for the Apple id and l did hard reset when l got to my destination after using it for a week now l am stuck at that page where it needs the apple id to continue set up. now l dont know what to do so that l may start using it. l tried using my apple id from my previous iphone but efforts became fruitless it is giving me a hint of the email like [email protected]. please guys help me out.

You've encountered activation lock.
There is no way to bypass it. If you can't get hold of whoever you bought it from, just turn it over to the police. It's probably a stolen phone.
http://support.apple.com/kb/PH13695

Hi good morning, I'm from malaysia, can I use apple education package my wife is a teacher, I'm interested for mac 13 inch water for her I be able to buy used apple education package how and what documents are needed

hi good morning,
I'm from malaysia,
can I use apple education package
my wife is a teacher,
I'm interested for mac 13 inch water for her
I be able to buy used apple education package
how and what documents are needed

You will need to contact th Apple Store. This is a user to user forum.
http://www.apple.com/contact/
http://store.apple.com/us-hed

I want to use SKYPE... what mike do I need & what Prefs are needed?

My G4 has a mike input plug ... But the mike I was using on my old Graphite sys will not fit.
Can anyone recommend a mike to use for SKYPE on my machine and please explain what Sys prefs are needed?
Thanks in advance.
Jim B

You didn't say what kind of G4 you had, but bear in mind some Macs have a mic-level input and others have a line-level input. Those with the latter (eg the latest G5 dual core Macs) don't pick up enough sound from a normal microphone without an amplifier. It's confusing because both inputs use a 3.5 mm headphone style plug and they look identical.
So if you're buying a headset that you might want to use if/when you change Macs, USB is the way to go.
I use the Logitech 350 USB headset and avoid the mic input altogether. It's best to use a headset rather than a mic, because the incoming audio from your caller won't 'feed back' into your microphone. You can use non-usb headsets coupled with Griffin's iMic USB adaptor as well, but that's an expensive solution.
Hope that helps.

What changes are needed in Server Operating system using OPC with Labview

I am a novice trying to connect Labview into KepwareEX OPC server. I am using MS Windos XP on both sides. at first I could see no OPC server I checked with the Kepware and they suggested me to fix the DCOM configuration on the Server. at last I saw the OPC Server and their client connected to it.
When I try to assign a Datasocket connected to a control on Front panel in to OPC. System Browses and see the OPC server but after selecting the tag. when I run the software, connection Lamp gets red and this Error comes up ""Can't connect to OPC server. Registery Access denied" . the Kepware quick client is working OK. and Labview got connected when I tested it on the same server. I think there is something wrong with Server OS configuration cause I can not See the Labview OPC Server too, which is installed but I am not using it, Can anybody help me ?

Hello:
When you try creating a new I/O server and when you select OPC, you should be able to see the list of OPC servers installed in the system. You can select LabVIEW OPC and select a I/O item from the configure OPC client instance.
From what I understand you are able to connect from LabVIEW just fine. Are you able to use server explorer and connect to kepware? The following tutorial will step you through using OPC servers with LabVIEW.
http://zone.ni.com/devzone/cda/tut/p/id/3742
DSC is LabVIEW add-on for developing your HMI/SCADA or high-channel-count data-logging applications. With the DSC Module, you can interactively develop a distributed monitoring and control system with tags ranging from a few dozen to tens of thousands. The following link has a TCP modbus presentation that you will find useful.
http://www.ni.com/labview/labviewdsc/upgrade.htm
Please let us know the steps you are following to configure the OPC connections and post some snapshots. This will help in better understanding.
Thanks and hope this helps
Regards
Avi Harjani

What do I need to run/use JSF ??

Sorry for a rather dumb question. We have a client/server system we would like to convert into a Web Based app using JSF.. we developed our system on J2SE 1.4
1. What software/runtime environment do I need ?
2. What downloads must I grab to start using it ??
Thanks very much
Mike

Hi,
first you'll need the JSF (latest current release EA3) found under:
http://java.sun.com/j2ee/javaserverfaces/
then an application server, e.g. tomcat/catalina supplied with the JWDSP and the J2EE platform found at:
http://java.sun.com/webservices/downloads/webservicespack.html
and
http://java.sun.com/j2ee/download.html
respectively.
Having installed the JSF you'll find a JSF Spec and tutorial where everything else (configuration, etc.) is explained.
If you're experiencing problems with the JWSDP 1.1 try getting hold of JWSDP 1.01.
Good luck & have fun....

What downloads are needed to start using Java?

Similar Messages

Maybe you are looking for