What driver supports a hp laserjet 4200n printer in windows 7

I am trying to add a laserjet 4200n to my new hp computer. It doesn't seem to be supported by windows 7 every time I try to print I get error printing message.

You have a couple of choices for drivers for this printer:
1. Use the In-OS driver that comes with the windows 7 system. Install the driver included in the Windows 7 operating system (OS)
2. Use the Universal Print Driver for either windows 7 32 bit or 64 bit. UPD home page
Here is the product page for this product: Laserjet 4200n
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

What is support pack for NW04 for print functionality

what is support pack for NW04 for print functionality????

Hi Kavita,
printing is no fun with web dynpro, as the web-centric solution to useJavaScript is not supported in WebDynpro.
I've spend lots of time with this issue and my experience is that if you want to get a proper printout you will have to rebuild the page (e.g. with XML) and render a printable version (e.g. with XSLT). Every other solution might work but will look crappy.
regards,
Christian

How can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

Hello everyone, how can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

OK. Start with:
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Click on the Erase tab in DU's main window. Select one of the two partitions, preferably the first one, change the Format type: to MSDOS then click on the Erase button.

HP LaserJet 1018 printer and windows 7Ultimate 32bit

I have HP LaserJet 1018 printer and it hasn't any problem when I used windows 7 professional but problems started when I replaced it with windows 7 Ultimate 32bit , In the beganning the windows didn't detect its existance so I ran the Hppsdr tool but it didn't help so much it convinced me that the problem in the USB cable so I bought another one and another for the power and the I downloaded the driver and even a setup called hp laserjet solution but it also doen't help so much the chance that the problem related to the hardware is imposible because I visit the maintance shop and the Beleive or Not it worked so fast without any mistakes , Now the problem definetly related to the software especially that the windows detected the printer and when I start to give the print order it stuck in the queue for a long time even if it the test page by the way also I tried to use the cleaning utility but it doen't work also as it encountered an error I don't now . The printer seems so dead now .....Help me please.

Hi,
Looks like there is a driver conflict on the computer....
What i would suggest is to remove all of HP printer S/W and install it back...
Go to control panel>add or remove programs> uninstall any program related to the HP printer....
Restart the computer and reinstall the printer S/W
Hope this works.......
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

Networking a HP color laserjet 2600n printer on windows 7 (64-bit)?

Hello,
Have an HP Color Laserjet 2600n printer and are running Microsoft Windows 7 (64-bit). I installed >> HP Color LaserJet 2600n Plug and Play Package off of HP website [ http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&p... ]. The drivers work fine if you connect via USB port but unfortunately there's no way to connect via network. Can anyone give me guidance on how to connect the 2006n via a network on windows 7 (64-bit)?
Thanks
This question was solved.
View Solution.

Have you plugged the printer into your router and does it have a proper IP address? If so:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Installing x64 and x86 drivers for a HP Laserjet p1505n printer on Windows Server 2008

How do you install both x64 and x86 drivers for a p1505n on a 2008 server? I have now managed to install 64 bit drivers but can't install x86 drivers in the normal way using Additional Drivers from the Sharing tab. I am also trying to do similar for a laserjet 1022n printer.

On the 2008 Server x64 I installed the FULL driver package 163mb.
I installed the HP P1505n on Server 2008 and made sure that was working.
Then I went back in and did the Additional Driver thing and when it asked for the driver for x86 I went to the
C:\hp_P1000_P1500_Full_Solution folder and scrolled to the bottom and there was the x86 XP driver.
I hope this helps someone.

Is there a univeral printer driver for HP Color LaserJet CM1312 MFP on Windows 7 64 bit?

I had bought a HP Color LaserJet CM1312 Multifunction Printer last year - up to now I could print out via the computer of my doughter (Windows XP), but now this computer is bugged and I would like to be able to use also my own Windows 7 64 bit Computer. Unfortunately the "Full solution" does not work at all, while there also appears to be no Universal Printer Driver for my special printer. In other words: I can´t use the printer and I am upset (HP at its best?).
Is there any way to get a printer driver that does what it is supposed to do?
Despaired...
MKunst

Have you tried downloading and installing the drivers from here?
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Is there any driver for an HP Laserjet 5000 printer that will work with OS 10.10.2?

I have an older laserjet printer and since updating to OS 10.10.2 I cannot print. I have been on with HP, and they no longer support this printer, and the latest driver is compatible with OS 10.6. Does anyone know a way to get around this? I really cannot go out and buy another printer, this one is great.
Thanks

Mention you're using a Mac and HP will give up pretty easily. It doesn't matter whether the printer is new or old.
Since the driver you have been using no longer works, did you try OS X's generic PostScript printer driver?
I agree old HP printers are built well and last forever, and no one likes keeping perfectly good printers in service more than I do, but are you absolutely certain a new printer is out of the question? Faster and much more capable laser printers than the LaserJet 5000 are readily available today for less than $100. HP doesn't make them.
Even finding a replacement your toner cartridge for yours must be getting difficult. The street price for that toner cartridge is about $150. HP's list price is well over $200.

Adding HP Laserjet 4200N Printer

I'm trying to set up this printer to work with my iMac and I'm having no luck. Someone please point me in the right direction.
1. I installed the driver found on hp.com
2. Connected the printer to my iMac with a USB printer cable
3. Went to Print & Fax in System Preferences and clicked on the + sign to add printer
4. I selected "Line Printer Daemon - LPD" for Protocol drop down menu
5. For the "Print Using" drop down menu I selected "Select a driver to use..." it expanded to a long list of printer options. I see "HP Laserjet 4200 Series" listed and I selected that but the "Add" button is gray and I can't click on it....I don't know why.
6. Because step #5 failed for me, I went back to the "Print Using" drop down menu and selected "Other" and that opened a window asking me to search for the printer driver that I had downloaded which I stated in step #1. My problem is I have no idea where the driver is located so I can complete step #6. When I installed it I did specify it to be installed in my hard drive but I went into my hard drive and can't find it anywhere.
Can you some help me with this if any of this makes any sense to you?
Thanks so much!
Tuan

If your printer is Bonjour aware you've configured it wrongly. First, you don't use Line Printer Daemon because you have a USB connected printer. When you open Print & Fax, then click the [+] button to add a printer you want to click on the Default icon which will present a printer list. If your printer is detected it will appear in the list. Select it, then wait to see if the drive is automatically selected. If not, then select "Select printer driver" from the drop down menu. Scroll through the driver list until you find the driver for your model. Select the driver and click on the Add button.
If you need more help select Mac Help from the Finder's Help menu and search for "add printer."

Win 7 (64 bit) Driver for my Color LaserJet 2550n Printer

A specific driver for my HP Color LaserJet 2550n is not listed in the Win 7 driver list. I see drivers for 2500 PCL 5, 2500 PS, 2550 PS, and 2600n. ( just updated the Windows driver list.) I've been using the HP Color LaserJet 2550 PS driver, but have problems printing that I never had with Win XP. Which ddriver is the correct one for my 2550n printer?. Thanks.

Hi,
Please get it directly from the following link:
http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is there anyway to get driver support for Cannon MG3500 series printer compatible with Mavericks ?

Just bought a Cannon MG3500 series printer. Apparently there is no driver for this unit that is compatible with Mavericks. Does anybody know of a solution?
Help appreciated.

Have you tried Canon's Web site for the Mg3500 Series?
Click on the Operating System list and select OS X Mavericks v10.9; then the Drivers section below it to download drivers.

Installing an HP Laserjet 4050 printer on Windows 7

I have an old HP4050 laserjet which has had light use and thus has plenty of life left in it. Until recently it was connected to a Windows XP PC's parallel port. It was also used over a network by Windows 7 PCs using the HP PCL5 universal driver.
I have now reconnected it to the parallel port of a PC running Windows 7 (SP1) x32. I have installed the PCL5 universal driver - but I cannot get it to print. I had to buy and install a parallel port card, as the PC didn't come with one - I haven't been able to test this separately so there is a small chance this could be faulty, even though it is brand new.
Bizarrely the driver configuration panel appears to be picking up the configuration of the printer - it knows for instance that a duplexer unit is installed. And yet it won't print from any application - nor will it print a test page.
Any ideas how I can sort this?
thanks
Richard

@trfh
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Networking color laserjet 3800 printer with Windows 7 OS

I have a color laserjet 3800 that is networked in an office of 5 computers using Windows XP pro OS. I just purchased a HP pavilion Slimline Windows 7 64 bit OS computer. The networking and printer networking set up was a breeze until it came to connecting the 3800. I have downloaded the PCL 5, 6 and universal drivers. When I go to add printer as a network printer and choose the 3800 it gives an error of not being able to find a driver. I tried to manually find the driver but it does not find a match in PCL 5, 6 or universal driver. The link below clearly shows the 3800 to be compatible with windows 7, but I cannot get it work.
http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=HP%20Col...
The network absolutely sees the printer and lets it be chosen but does not let it get installed on the windows 7 machine.
Thank you for any assistance.

Same Problem here. Does no one have a solution?

HP LaserJet P1102w - printer offline - Windows Vista ??

We have a new HP printer LaserJet P1102w and my laptop has Windows Vista. I am unable to print - message is always "printer offline" - can anyone assist with how to fix this issue. I would appreciate any help - we are totally unable to use this pirnter. Thanks!

Hello,
According to the information you provided, it is really difficult to diagnostic the issue. But there are several things may good for you to check:
1. Did the printer work before? If yes, you may seeking what' the difference may lead to this offline issue.
2. How do you connect P1102w to your PC? I suggest that you use USB connection to test
3. If you connect it via wireless, could you double check whether the router working fine?
4. Please make sure the printer is power on and connected to the PC successfully, otherwise "offline" is the accurate status for it.
Hope it helps.
I am an employee of HP but I only speak for myself and not for the company.

Can't find driver for my hp photosmart 7660 printer for windows 7

Hello, I want a driver(hp photosmart 7660) for my laptop I wouldn't like to change my printer. I tried the steps another guy asked for the same printer but for windows 8 and it didn't worked. I couldn't find the 1st printer hp deskjet plc3 or something and the others didn't work.Please if anyone can help me I would appreciate it.

Hi,
Although a driver for Windows 7 is not avaialble, you may install an Alternative driver by using the Deskjet 5600 model.
Follow these steps to install an alternative driver for your printer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796821&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

What driver supports a hp laserjet 4200n printer in windows 7

Similar Messages

Maybe you are looking for