What drivers to load?

I will be re-installing Windows XP on my system that has an MSI-7125-010 Neo4 platinum mb. Can you verify for me which drivers I will need or not need? It's been a few years since I've done this. I will not be using RAID.
Thanks. 

Quote from: Henry on 24-March-10, 05:41:21
Just for plain SATA no RAID they shouldn't be needed. I didn't need them on my K8N Neo4-F and it's pretty much the same as the Platinum including them using the same BIOS. I know the older MB's with the Promise controller needed them even for SATA no RAID.
It always gave me a BSOD when I didn't install them during the setup. It was non-raid too.

Similar Messages

  • System Restore - what drivers do I load?

    I had a self-induced computer crash with a new Lenovo x120e and am trying to restore my system. The Lenovo Operating System Recovery Disk did nothing (went to Restore and Recovery and then crashed) but fortunately someone recommended getting a Windows 7 recovery disk from NeoSoft (for $10).  That at least allows me to get to Windows System Restore! 
    Now the problem is that System Restore can't find my operating system, and asks me to load drivers. I have no idea what drivers to load!  There is a DVD with drivers...but as this computer has no DVD that isn't terribly useful to me.  
    I did find a folder drivers when I ended the command line prompt through System Recovery...but still at at a lost for what drivers to install.  
    Can anybody help here?  Thanks.

    Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
    If driver+software then that's a problem as they likely won't write one for OS X.
    If drivers you can install these open source one and hopefully it might work,  Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
    http://sourceforge.net/projects/gimp-print/files/

  • How can I "see" what drivers are currently loaded in memory

    I am currently trying to track down an "apparent" memory leak where the performance of my relatively idle Macbook degrades over time due to an ever increasing allocation of wired memory (as viewed from Activity Monitor). Within about two hours of rebooting with only the essential processes running, I see my wired memory continue to increase up to and beyond 700 MB. About this time I experience intermittent spikes in the "CPU-%System" allocation of 25% and more which causes severe lagging in my mouse and keyboard. The machine eventually becomes unusable and requires a reboot.
    Because I see the wired memory continue to grow inexplicably over time and I am unable to isolate this to any processes listed in the Activity Monitor pane I have to believe that it is something not "visible" from the AM pane. I have read that wired memory is responsible for hosting the VM objects, the VM buffer caches, the I/O buffer caches, and the drivers.
    FWIW, I downloaded "Main Menu" maintenance software from Santa Software and ran all of the cache maintenance scripts - unfortunately, this did not effect any discernible improvement.
    My next guess is that there is some ill-performing driver loaded into memory that is chomping on my wired memory but I do not know how to "view" what drivers are currently resident.
    Is there a way to view each of the drivers that are currently loaded in memory?
    And, better yet, is there a way to view what amount of memory is currently allocated to each such driver?
    Any help is much appreciated - thanks in advance!
    - Bruce

    You would certainly see SOME "depreciation in memory", due to e.g. spotlight indexing and other processes. But it should be nowhere near to what you describe to the point where your CPU fan runs.
    Without any further detailed technical expertise, I would assume that it could be a RAM stick that is not working as it should be, resulting in the CPU having to make the extra "effort" to compensate for lack of RAM.
    Have you taken the RAM sticks out and reseated them? An dust preventing good contact?
    http://support.apple.com/kb/HT1651
    Any good?

  • Equium M40x-189 - What drivers/utilities I need to install?

    Dear All,
    Equium m40x-189
    Reloaded Windows XP, but havent found the Toshiba Utilities and drivers disk that must have come with the lappy, not a lot works and in Device Manager there are a load of devices with yellow alerts.
    The internal wireless is not seeable, nor is a wireless card slotted into the PCMI expansion slot on the side.
    These are just the first things I noticed were not available. Need wireless to get to the internet to register Windies.
    I am not sure which drivers/utilities I need to download and install from the Toshiba download drivers web site.
    Is there such a thing as a list or instructions any where that details what drivers/utilities are required to make all the 'bits' work on a newly Windows loaded laptop.?
    Any help would be of immense value.
    Best regards
    Mark

    Hi
    As you already said on the Toshiba European driver download page you can download all necessary drivers and tools for your notebook.
    Furthermore on the website you will find the installation instructions document. Use this list as a recommended driver and software installation order.
    I think this is such a list that you mean so check this!!!
    Last but not least I think must install every driver and download on the Toshiba page because they are necessary for a properly working notebook.
    If you have more questions, please let us know.

  • What drivers do I need?

    I have a ThinkPad T41 type: 2379 DJU, I am going to do a clean install of the operating system and was told by tech support I would have to then load the drivers. There is a list of drivers for my computer here but do I need them all? I want to be prepared for my reinstall and plan to download the drivers I need before I do anything to the computer. I'm going to put them on a disc or thumb drive for ease of installing them.
    Any suggestions on what I will need or how to go about this task, as I have never done this before?
    KYdrewgirl
    Solved!
    Go to Solution.

    Hi, I am no expert when it comes to computers and was having a few problems with drivers when someone reccomended Uniblue Driver scanner. (check it out here)   http://www.liutilities.com/products/driverscanner/  ) the trial version will tell you what drivers are missing or in need of update but you have to find and install them yourself. I purchased it for 20.00gbp and it checks, collects, and installs the drivers for you, I only had one problem using this when one of the updates didnt work but you can roll back easily to previous version. I did this after I re-installed XP Pro.
    Hope this is of some use
    Gordon
    T41, T43, T60p, Apple Powerbook G4
    T41, T43, T60 Downgraded to XPpro, T60p XPpro SP3 8741-C2G

  • Dissapeared footer (where is written what page is loading and so on) how to restore it?

    Dissapeared footer (where is written what page is loading and so on) how to restore it?
    there is the screenshot ( http://j.imagehost.org/0213/Clipboard03.jpg )

    View > Statusbar = click it

  • In Safari I can define what pages are loaded when I open a "New Window". How do I achieve the same in Firefox (and supress the current begavior of it opening all of the tabs that I defined as my home page all the time)?

    I am returning to Firefox after having used Safari on Mac for the past year. One thing I liked about Safari was that I could define what page gets loaded when I used the File Menu command to open a new Browser Window. I defined this as opening up with my Bookmarks Menu where I then was able to select the page I wanted to go to.
    I have not been able to find a way to define this in Firefox and was surprised to see that "New Window" in Firefox opens all of tabs that I've defined as my Home Page.
    Is there a way to manage this?

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • What drivers do i need to install on my Lenovo Y530 after installing Windows 7???

    I just installed Windows 7 on my new Lenovo Y530 and want to know what drivers need to be installed. A few problems is the surround sound speakers, the laptop had amazing sound before i put 7 on it and now the speakers aren't working together.
    Also the Veriface login isnt working, does anyone know how to connect it properly??
    Also what other drivers need to be re-installed to bring it back to full functionality???
    thanks for all the help

    You're using the MS .NET Framework Provider for Oracle. You will need to install the Oracle client on each client machine using a Windows Form to access Oracle.
    You will also need to include the MS .NET Framework Provider for Oracle. I can't remember if MS includes it with .NET Framework or not, however.

  • Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro

    Hi Everyone,
    Can I force the bootcamp wizard to skip looking for the bootcamp drivers?  I have already downloaded the latest drivers and loaded them on a FAT usb drive.  All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
    The bootcamp drivers have been downloaded from apple's website.  Filename:  BootCamp5.0.5033
    I have a iMac 27" late 2013 model.
    NOTE:  I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
    Appreciate any assistance.
    Regards,
    asdutoit

    There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
    Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

  • What drivers do I need for a dell V515w AIO printer on my MacBook Pro OX S 10.7.2

    What drivers do I need for a Dell V515w all in one printer for my MacBook Pro OS X 10.7.2 ????

    Uh, tough call, you'll have to check what is used with a PC, drivers or driver+software.
    If driver+software then that's a problem as they likely won't write one for OS X.
    If drivers you can install these open source one and hopefully it might work,  Dell and Apple don't get along so you likely won't see Dell drivers installed by Apple in OS X like they do for others.
    http://sourceforge.net/projects/gimp-print/files/

  • What programs are loaded onto the MacBook.

    I am looking at getting a MacBook sometime this upcoming weekend, and I was wondering what programs are loaded onto it??
    And which ones are good for just basic usage (documents and internet)for now? I plan to get photoshop at a later date for photo editing.

    Welcome to Apple Discussions....this link takes you to the Apple Store >MacBook< section....
    <a class="jive-link-external-small" href="http://">http://store.apple.com/us/browse/home/shop_mac/family/macbook?mc o=MTE3MjA
    down towards the bottom of the page on the right is the list of included software...

  • What drivers do I need to reinstall different OS and where can I download them for ThinkPads T61?

    I just accidentally purchased one ThinkPads T61 with Linux OS version.  I don't use Linux so I plan to wipe out Linux and install Windows XP Pro instead.  I have the Windows OS, but as I know I will need to install some drivers afterward to make the notebook work properly. 
    My question would be: How many and what drivers do I need to reinstall different OS and where can I download them?
    Thank you for your help!
    Solved!
    Go to Solution.

    Right here.
    T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
    T400 2765-T7U Windows 7
    Registered Linux User #160145
    FYI: I am not employed by Lenovo

  • I recently bought a Brother MFC-J430W, and it is Mac compatible, but no matter what drivers I install, I cannot connect the machine to my macbook pro. The CD for MFL Pro Suite does not let me open the "start up" part so I am very stuck!

    I cannot access my MFL Pro Suite CD no matter what drivers I install. I have OSX 10.8 updated right now. Please help, I'll be needing my printer in a couple days for university!

    That's Windows software.

  • What is a "Load Program" for material master?

    Hi All,
    What is a "Load Program" for the Material master? Is this the Mass Maintainence MM17? Can a Material be extended to all VIEWs + all Plants in one shot via MM17?
    What are the steps using MM17?
    Thanks in advance

    Yes, There is a Program to Upload Material Master Ie : RMDATIND, RMDATGEN
    Using the above Program you can Upload Material Master. And You can Also use Uploading Tools like LSMW / BDC etc.
    MM17 is For MAss Maintenance. Suppose If you want to Update Purchase Group / Purchase Value Key / MRP Controller / Etc... to 1000 Materials Using this MM17 you can Update in Bulk.
    For Extending Views You can Use MM50 with LSMW if Material is Bulk.
    Regards,
    Ashok

  • What drivers to update for recent Twist purchases?

    Hello everyone,
    I just bought the twist on black friday and need to know what drivers to update?
    Also, does anyone know how one can update drivers by using the lenovo setting without the usual going to a web browser and manually finding the update? I am pretty sure there is a way but I don't seem to find it. I was looking around the Lenovo Support App but maybe I didn't look well enough.
    Similarly, the driver update for tent mode didn't work for me, so hoping Lenovo comes with a solution to the Tentmode problem.

    I'm expecting driver updates to solve that issues that most of us are seeing with the lenovo twist
    Touchpad driver:
    should resolve the issue where mouse moves and click around in tablet mode
    Power Management:
    should resolve the issue with the auto-rotation especially in tent mode
    And maybe one that improves the battery life? Hopefully...

Maybe you are looking for